My Pastes
Public Pastes
Layout Width
Share Pastebin
Guest
Public paste!

Untitled

By: a guest | Mar 14th, 2010 | Syntax: None | Size: 4.39 KB | Hits: 109 | Expires: Never
Download | Raw | Embed | Report abuse
Copy text to clipboard
  1. [root@sparky plugins]# smartctl -a /dev/sda
  2. smartctl version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen
  3. Home page is http://smartmontools.sourceforge.net/
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Device Model:     WDC WD1002FBYS-02A6B0
  7. Serial Number:    WD-WMATV5339827
  8. Firmware Version: 03.00C06
  9. User Capacity:    1,000,204,886,016 bytes
  10. Device is:        Not in smartctl database [for details use: -P showall]
  11. ATA Version is:   8
  12. ATA Standard is:  Exact ATA specification draft version not indicated
  13. Local Time is:    Sun Mar 14 20:12:09 2010 CDT
  14. SMART support is: Available - device has SMART capability.
  15. SMART support is: Enabled
  16.  
  17. === START OF READ SMART DATA SECTION ===
  18. SMART overall-health self-assessment test result: PASSED
  19.  
  20. General SMART Values:
  21. Offline data collection status:  (0x84) Offline data collection activity
  22.                                         was suspended by an interrupting command from host.
  23.                                         Auto Offline Data Collection: Enabled.
  24. Self-test execution status:      (   0) The previous self-test routine completed
  25.                                         without error or no self-test has ever
  26.                                         been run.
  27. Total time to complete Offline
  28. data collection:                 (18000) seconds.
  29. Offline data collection
  30. capabilities:                    (0x7b) SMART execute Offline immediate.
  31.                                         Auto Offline data collection on/off support.
  32.                                         Suspend Offline collection upon new
  33.                                         command.
  34.                                         Offline surface scan supported.
  35.                                         Self-test supported.
  36.                                         Conveyance Self-test supported.
  37.                                         Selective Self-test supported.
  38. SMART capabilities:            (0x0003) Saves SMART data before entering
  39.                                         power-saving mode.
  40.                                         Supports SMART auto save timer.
  41. Error logging capability:        (0x01) Error logging supported.
  42.                                         General Purpose Logging supported.
  43. Short self-test routine
  44. recommended polling time:        (   2) minutes.
  45. Extended self-test routine
  46. recommended polling time:        ( 208) minutes.
  47. Conveyance self-test routine
  48. recommended polling time:        (   5) minutes.
  49. SCT capabilities:              (0x303f) SCT Status supported.
  50.                                         SCT Feature Control supported.
  51.                                         SCT Data Table supported.
  52.  
  53. SMART Attributes Data Structure revision number: 16
  54. Vendor Specific SMART Attributes with Thresholds:
  55. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  56.   1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  57.   3 Spin_Up_Time            0x0027   100   253   021    Pre-fail  Always       -       0
  58.   4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       5
  59.   5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  60.   7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  61.   9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       926
  62.  10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
  63.  11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
  64.  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       4
  65. 192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       2
  66. 193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       2
  67. 194 Temperature_Celsius     0x0022   098   096   000    Old_age   Always       -       52
  68. 196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
  69. 197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
  70. 198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
  71. 199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
  72. 200 Multi_Zone_Error_Rate   0x0008   100   253   000    Old_age   Offline      -       0
  73.  
  74. SMART Error Log Version: 1
  75. No Errors Logged
  76.  
  77. SMART Self-test log structure revision number 1
  78. No self-tests have been logged.  [To run self-tests, use: smartctl -t]
  79.  
  80.  
  81. SMART Selective self-test log data structure revision number 1
  82.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  83.     1        0        0  Not_testing
  84.     2        0        0  Not_testing
  85.     3        0        0  Not_testing
  86.     4        0        0  Not_testing
  87.     5        0        0  Not_testing
  88. Selective self-test flags (0x0):
  89.   After scanning selected spans, do NOT read-scan remainder of disk.
  90. If Selective self-test is pending on power-up, resume after 0 minute delay.
create new paste | create new version of this paste RAW Paste Data