Booting Linux on physical CPU 0x0
Linux version 3.8.3 (root@BUFFALO) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 Sat Mar 30 13:12:21 EDT 2013
CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
CPU: VIVT data cache, VIVT instruction cache
Machine: Buffalo LS-WVL/E-AP NAS
Ignoring tag cmdline (using the default kernel command line)
Ignoring unrecognised tag 0x41000403
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
Kernel command line: loglevel=7 root=/dev/sda2 rw initrd=0x00800040,12M netconsole=6665@192.168.11.150/eth0,6666@192.168.11.47/00:13:02:0e:6d:0b
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
__ex_table already sorted, skipping sort
Memory: 256MB = 256MB total
Memory: 243080k/243080k available, 19064k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .text : 0xc0008000 - 0xc03faee4   (4044 kB)
      .init : 0xc03fb000 - 0xc041cc4c   ( 136 kB)
      .data : 0xc041e000 - 0xc0451680   ( 206 kB)
       .bss : 0xc0451680 - 0xc0460fe4   (  63 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:114
sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474ms
Calibrating delay loop... 1594.16 BogoMIPS (lpj=7970816)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x370ea8 - 0x370ee4
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 1024 KiB pool for atomic coherent allocations
Kirkwood: MV88F6282-Rev-A0, TCLK=200000000.
Feroceon L2: Enabling L2
Feroceon L2: Cache support initialised.
lswvl_init: finished
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Initialized.
Switching to clocksource orion_clocksource
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12288K
JFS: nTxBlock = 1995, nTxLock = 15960
SGI XFS with security attributes, large block/inode numbers, no debug enabled
msgmni has been set to 498
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
mv_xor mv_xor.0: Marvell XOR driver
mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
mv_xor mv_xor.0: Marvell XOR: ( xor fill cpy )
mv_xor mv_xor.1: Marvell XOR driver
mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
console [ttyS0] enabled
serial8250.1: ttyS1 at MMIO 0xf1012100 (irq = 34) is a 16550A
brd: module loaded
loop: module loaded
sata_mv sata_mv.0: cannot get optional clkdev
sata_mv sata_mv.0: slots 32 ports 2
scsi0 : sata_mv
scsi1 : sata_mv
ata1: SATA max UDMA/133 irq 21
ata2: SATA max UDMA/133 irq 21
m25p80 spi0.0: found m25p40, expected m25p80
m25p80 spi0.0: m25p40 (512 Kbytes)
Creating 1 MTD partitions on "spi0.0":
0x000000000000-0x000000080000 : "u-boot"
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
libphy: mv643xx_eth smi: probed
mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 4c:e6:76:1e:74:a6
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
orion-ehci orion-ehci.0: Marvell Orion EHCI
orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ata1.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
rtc-mv rtc-mv: retrieved alarm date/time is not valid.
rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
gpio-fan gpio-fan: GPIO fan initialized
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
cpuidle: using governor ladder
cpuidle: using governor menu
leds-gpio leds-gpio: pins are not configured from the driver
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
MV-DMA: TDMA engine up and running, IRQ 49
usbcore: registered new interface driver snd-usb-audio
TCP: cubic registered
NET: Registered protocol family 17
Key type dns_resolver registered
netpoll: netconsole: local port 6665
netpoll: netconsole: local IP 192.168.11.150
netpoll: netconsole: interface 'eth0'
netpoll: netconsole: remote port 6666
netpoll: netconsole: remote IP 192.168.11.47
netpoll: netconsole: remote ethernet address 00:13:02:0e:6d:0b
netpoll: netconsole: device eth0 not up yet, forcing it
ata2: SATA link down (SStatus 0 SControl F300)
 sda: sda1 sda2 sda3 sda4 sda5 sda6
sd 0:0:0:0: [sda] Attached SCSI disk
mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled
console [netcon0] enabled
netconsole: network logging started
input: gpio-keys as /devices/platform/gpio-keys/input/input0
rtc-mv rtc-mv: setting system clock to 2070-01-01 00:00:53 UTC (3155760053)
ALSA device list:
  No soundcards found.
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounting ext2 file system using the ext4 subsystem
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext2 filesystem) on device 1:0.
EXT4-fs (sda2): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sda2): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext3 filesystem) on device 8:2.
Trying to move old root to /initrd ... /initrd does not exist. Ignored.
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing init memory: 132K
Adding 1000444k swap on /dev/sda5.  Priority:-1 extents:1 across:1000444k
EXT4-fs (sda2): re-mounted. Opts: (null)
EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
XFS (sda6): Mounting Filesystem
XFS (sda6): Ending clean mount
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net c044dfe4)
nfsd: last server has exited, flushing export cache