Advertisement
Guest User

mb

a guest
Oct 27th, 2016
83
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 5.89 KB | None | 0 0
  1. # Example config file /etc/vsftpd.conf
  2. #
  3. # The default compiled in settings are fairly paranoid. This sample file
  4. # loosens things up a bit, to make the ftp daemon more usable.
  5. # Please see vsftpd.conf.5 for all compiled in defaults.
  6. #
  7. # READ THIS: This example file is NOT an exhaustive list of vsftpd options.
  8. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
  9. # capabilities.
  10. #
  11. #
  12. # Run standalone? vsftpd can run either from an inetd or as a standalone
  13. # daemon started from an initscript.
  14. listen=NO
  15. #
  16. # This directive enables listening on IPv6 sockets. By default, listening
  17. # on the IPv6 "any" address (::) will accept connections from both IPv6
  18. # and IPv4 clients. It is not necessary to listen on *both* IPv4 and IPv6
  19. # sockets. If you want that (perhaps because you want to listen on specific
  20. # addresses) then you must run two copies of vsftpd with two configuration
  21. # files.
  22. listen_ipv6=YES
  23. #
  24. # Allow anonymous FTP? (Disabled by default).
  25. anonymous_enable=YES
  26. #
  27. # Uncomment this to allow local users to log in.
  28. local_enable=YES
  29. #
  30. # Uncomment this to enable any form of FTP write command.
  31. write_enable=YES
  32. #
  33. # Default umask for local users is 077. You may wish to change this to 022,
  34. # if your users expect that (022 is used by most other ftpd's)
  35. #local_umask=022
  36. #
  37. # Uncomment this to allow the anonymous FTP user to upload files. This only
  38. # has an effect if the above global write enable is activated. Also, you will
  39. # obviously need to create a directory writable by the FTP user.
  40. anon_upload_enable=YES
  41. #
  42. # Uncomment this if you want the anonymous FTP user to be able to create
  43. # new directories.
  44. anon_mkdir_write_enable=YES
  45. #
  46. # Activate directory messages - messages given to remote users when they
  47. # go into a certain directory.
  48. dirmessage_enable=YES
  49. #
  50. # If enabled, vsftpd will display directory listings with the time
  51. # in your local time zone. The default is to display GMT. The
  52. # times returned by the MDTM FTP command are also affected by this
  53. # option.
  54. use_localtime=YES
  55. #
  56. # Activate logging of uploads/downloads.
  57. xferlog_enable=YES
  58. #
  59. # Make sure PORT transfer connections originate from port 20 (ftp-data).
  60. connect_from_port_20=YES
  61. #
  62. # If you want, you can arrange for uploaded anonymous files to be owned by
  63. # a different user. Note! Using "root" for uploaded files is not
  64. # recommended!
  65. #chown_uploads=YES
  66. #chown_username=whoever
  67. #
  68. # You may override where the log file goes if you like. The default is shown
  69. # below.
  70. #xferlog_file=/var/log/vsftpd.log
  71. #
  72. # If you want, you can have your log file in standard ftpd xferlog format.
  73. # Note that the default log file location is /var/log/xferlog in this case.
  74. #xferlog_std_format=YES
  75. #
  76. # You may change the default value for timing out an idle session.
  77. #idle_session_timeout=600
  78. #
  79. # You may change the default value for timing out a data connection.
  80. #data_connection_timeout=120
  81. #
  82. # It is recommended that you define on your system a unique user which the
  83. # ftp server can use as a totally isolated and unprivileged user.
  84. #nopriv_user=ftpsecure
  85. #
  86. # Enable this and the server will recognise asynchronous ABOR requests. Not
  87. # recommended for security (the code is non-trivial). Not enabling it,
  88. # however, may confuse older FTP clients.
  89. #async_abor_enable=YES
  90. #
  91. # By default the server will pretend to allow ASCII mode but in fact ignore
  92. # the request. Turn on the below options to have the server actually do ASCII
  93. # mangling on files when in ASCII mode.
  94. # Beware that on some FTP servers, ASCII support allows a denial of service
  95. # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
  96. # predicted this attack and has always been safe, reporting the size of the
  97. # raw file.
  98. # ASCII mangling is a horrible feature of the protocol.
  99. #ascii_upload_enable=YES
  100. #ascii_download_enable=YES
  101. #
  102. # You may fully customise the login banner string:
  103. #ftpd_banner=Welcome to blah FTP service.
  104. #
  105. # You may specify a file of disallowed anonymous e-mail addresses. Apparently
  106. # useful for combatting certain DoS attacks.
  107. #deny_email_enable=YES
  108. # (default follows)
  109. #banned_email_file=/etc/vsftpd.banned_emails
  110. #
  111. # You may restrict local users to their home directories. See the FAQ for
  112. # the possible risks in this before using chroot_local_user or
  113. # chroot_list_enable below.
  114. #chroot_local_user=YES
  115. #
  116. # You may specify an explicit list of local users to chroot() to their home
  117. # directory. If chroot_local_user is YES, then this list becomes a list of
  118. # users to NOT chroot().
  119. # (Warning! chroot'ing can be very dangerous. If using chroot, make sure that
  120. # the user does not have write access to the top level directory within the
  121. # chroot)
  122. chroot_local_user=YES
  123. allow_writeable_chroot=YES
  124. #chroot_list_enable=YES
  125. # (default follows)
  126. #chroot_list_file=/etc/vsftpd.chroot_list
  127. #
  128. # You may activate the "-R" option to the builtin ls. This is disabled by
  129. # default to avoid remote users being able to cause excessive I/O on large
  130. # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
  131. # the presence of the "-R" option, so there is a strong case for enabling it.
  132. #ls_recurse_enable=YES
  133. #
  134. # Customization
  135. #
  136. # Some of vsftpd's settings don't fit the filesystem layout by
  137. # default.
  138. #
  139. # This option should be the name of a directory which is empty. Also, the
  140. # directory should not be writable by the ftp user. This directory is used
  141. # as a secure chroot() jail at times vsftpd does not require filesystem
  142. # access.
  143. secure_chroot_dir=/var/run/vsftpd/empty
  144. #
  145. # This string is the name of the PAM service vsftpd will use.
  146. pam_service_name=vsftpd
  147. #
  148. # This option specifies the location of the RSA certificate to use for SSL
  149. # encrypted connections.
  150. rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
  151. rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
  152. ssl_enable=YES
  153.  
  154. #
  155. # Uncomment this to indicate that vsftpd use a utf8 filesystem.
  156. #utf8_filesystem=YES
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement