My Pastes
Public Pastes
Layout Width
Share Pastebin
Guest
Public paste!

Untitled

By: a guest | Mar 15th, 2010 | Syntax: None | Size: 3.84 KB | Hits: 26 | Expires: Never
Download | Raw | Embed | Report abuse
Copy text to clipboard
  1. [  148.812232] Mantis 0000:01:07.0: PCI INT A disabled
  2. [  323.020923] found a VP-2033 PCI DVB-C device on (01:07.0),
  3. [  323.020949] Mantis 0000:01:07.0: PCI INT A -> Link[LNKB] -> GSI 16 (level, low) -> IRQ 16
  4. [  323.021060]     Mantis Rev 1 [153b:1178], irq: 16, latency: 64
  5. [  323.021065]     memory: 0x0, mmio: 0xffffc900110b2000
  6. [  323.021094] mantis_stream_control (0): Set stream to HIF
  7. [  323.021288] mantis_i2c_init (0): Initializing I2C ..
  8. [  323.021294] mantis_i2c_init (0): Disabling I2C interrupt
  9. [  323.021301] mantis_i2c_xfer (0): Messages:2
  10. [  323.021305]         mantis_i2c_write: Address=[0x50] <W>[ 08 ]
  11. [  323.021526]         mantis_i2c_read:  Address=[0x50] <R>[ 00 08 ca 1d b7 59 ]
  12. [  323.022255]     MAC Address=[00:08:ca:1d:b7:59]
  13. [  323.022259] mantis_dma_init (0): Mantis DMA init
  14. [  323.022289] mantis_alloc_buffers (0): DMA=0x37860000 cpu=0xffff880037860000 size=65536
  15. [  323.022297] mantis_alloc_buffers (0): RISC=0x3780f000 cpu=0xffff88003780f000 size=1000
  16. [  323.022303] mantis_calc_lines (0): Mantis RISC block bytes=[4096], line bytes=[2048], line count=[32]
  17. [  323.022307] mantis_dvb_init (0): dvb_register_adapter
  18. [  323.022337] DVB: registering new adapter (Mantis DVB adapter)
  19. [  323.022340] mantis_dvb_init (0): dvb_dmx_init
  20. [  323.022491] mantis_dvb_init (0): dvb_dmxdev_init
  21. [  323.023082] mantis_frontend_power (0): Power ON
  22. [  323.023088] gpio_set_bits (0): Set Bit <12> to <1>
  23. [  323.023093] gpio_set_bits (0): GPIO Value <3000>
  24. [  323.130330] gpio_set_bits (0): Set Bit <12> to <1>
  25. [  323.130338] gpio_set_bits (0): GPIO Value <3000>
  26. [  323.240338] mantis_frontend_soft_reset (0): Frontend RESET
  27. [  323.240343] gpio_set_bits (0): Set Bit <13> to <0>
  28. [  323.240347] gpio_set_bits (0): GPIO Value <1000>
  29. [  323.350337] gpio_set_bits (0): Set Bit <13> to <0>
  30. [  323.350342] gpio_set_bits (0): GPIO Value <1000>
  31. [  323.460343] gpio_set_bits (0): Set Bit <13> to <1>
  32. [  323.460348] gpio_set_bits (0): GPIO Value <3000>
  33. [  323.570326] gpio_set_bits (0): Set Bit <13> to <1>
  34. [  323.570330] gpio_set_bits (0): GPIO Value <3000>
  35. [  323.940344] vp2033_frontend_init (0): Probing for CU1216 (DVB-C)
  36. [  323.940350] mantis_i2c_xfer (0): Messages:2
  37. [  323.940354]         mantis_i2c_write: Address=[0x50] <W>[ ff ]
  38. [  323.940571]         mantis_i2c_read:  Address=[0x50] <R>[ 3b ]
  39. [  323.940796] mantis_i2c_xfer (0): Messages:2
  40. [  323.940799]         mantis_i2c_write: Address=[0x0c] <W>[ 1a ]
  41. [  323.941015]         mantis_i2c_read:  Address=[0x0c] <R>[ 7d ]
  42. [  323.941239] mantis_i2c_xfer (0): Messages:2
  43. [  323.941242]         mantis_i2c_write: Address=[0x50] <W>[ ff ]
  44. [  323.941459]         mantis_i2c_read:  Address=[0x50] <R>[ 3b ]
  45. [  323.941683] mantis_i2c_xfer (0): Messages:1
  46. [  323.941686]         mantis_i2c_write: Address=[0x0c] <W>[ 00 33 ]
  47. [  323.942005] mantis_i2c_xfer (0): Messages:2
  48. [  323.942008]         mantis_i2c_write: Address=[0x0c] <W>[ 1a ]
  49. [  323.942226]         mantis_i2c_read:  Address=[0x0c] <R>[ 7d ]
  50. [  323.942451] vp2033_frontend_init (0): found Philips CU1216 DVB-C frontend (TDA10023) @ 0x0c
  51. [  323.942455] vp2033_frontend_init (0): Mantis DVB-C Philips CU1216 frontend attach success
  52. [  323.942459] vp2033_frontend_init (0): Done!
  53. [  323.942465] DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)...
  54. [  323.943175] mantis_input_init (0): Input device Mantis VP-2033 IR Receiver PCI: pci-0000:01:07.0/ir0
  55. [  323.943339] input: Mantis VP-2033 IR Receiver as /devices/virtual/input/input7
  56. [  323.943491] Creating IR device irrcv0
  57. [  323.943497] mantis_input_init (0): Input device registered
  58. [  323.943502] mantis_uart_init (0): Initializing UART @ 9600bps parity:NONE
  59. [  323.943516] mantis_uart_init (0): UART succesfully initialized
  60. [  323.943537] mantis_uart_read (0): Reading ... <3f>
  61. [  323.943541] mantis_uart_work (0): UART BUF:0 <3f>
  62. [  323.943543]
  63. [  323.943546] RC Input Sendkey:0 <3f>
create new paste | create new version of this paste RAW Paste Data