Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <6>[ 0.000000] Initializing cgroup subsys cpu
- <5>[ 0.000000] Linux version 3.1.10-franco.Kernel (francisco@francisco) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #61 SMP PREEMPT Mon Apr 29 22:22:32 PDT 2013
- <4>[ 0.000000] CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
- <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
- <4>[ 0.000000] Machine: grouper
- <4>[ 0.000000] Ignoring unrecognised tag 0x41000801
- <4>[ 0.000000] Ignoring unrecognised tag 0x41000801
- <4>[ 0.000000] Ignoring unrecognised tag 0x41000801
- <4>[ 0.000000] Ignoring unrecognised tag 0x41000801
- <4>[ 0.000000] Ignoring unrecognised tag 0x41000801
- <4>[ 0.000000] Ignoring unrecognised tag 0x41000801
- <4>[ 0.000000] Ignoring unrecognised tag 0x41000801
- <6>[ 0.000000] Found tegra_fbmem: 007d0c80@abe01000
- <6>[ 0.000000] Tegra reserved memory:
- <6>[ 0.000000] LP0: bddf9000 - bddfafff
- <6>[ 0.000000] Bootloader framebuffer: abe01000 - ac5d1fff
- <6>[ 0.000000] Framebuffer: bec00000 - bf4fffff
- <6>[ 0.000000] 2nd Framebuffer: bf500000 - bfdfffff
- <6>[ 0.000000] Carveout: 00000000 - 00000000
- <6>[ 0.000000] Vpr: 00000000 - 00000000
- <4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- <7>[ 0.000000] On node 0 totalpages: 256512
- <7>[ 0.000000] free_area_init_node: node 0, pgdat c0886980, node_mem_map c113e000
- <7>[ 0.000000] Normal zone: 1728 pages used for memmap
- <7>[ 0.000000] Normal zone: 0 pages reserved
- <7>[ 0.000000] Normal zone: 194880 pages, LIFO batch:31
- <7>[ 0.000000] HighMem zone: 572 pages used for memmap
- <7>[ 0.000000] HighMem zone: 59332 pages, LIFO batch:15
- <6>[ 0.000000] fuse_speedo_calib: ATE prog ver 3.8
- <6>[ 0.000000] Tegra3: CPU Speedo ID 7, Soc Speedo ID 1
- <6>[ 0.000000] Tegra Revision: A03 SKU: 0x83 CPU Process: 1 Core Process: 0
- <6>[ 0.000000] tegra: PLLP fixed rate: 408000000
- <4>[ 0.000000] Lowering cpu_lp maximum rate from 600000000 to 500000000
- <4>[ 0.000000] Lowering sbus maximum rate from 378000000 to 267000000
- <4>[ 0.000000] Lowering vi maximum rate from 470000000 to 409000000
- <4>[ 0.000000] Lowering vde maximum rate from 600000000 to 416000000
- <4>[ 0.000000] Lowering mpe maximum rate from 600000000 to 416000000
- <4>[ 0.000000] Lowering 2d maximum rate from 600000000 to 416000000
- <4>[ 0.000000] Lowering epp maximum rate from 600000000 to 416000000
- <4>[ 0.000000] Lowering 3d maximum rate from 600000000 to 416000000
- <4>[ 0.000000] Lowering 3d2 maximum rate from 600000000 to 416000000
- <4>[ 0.000000] Lowering se maximum rate from 625000000 to 416000000
- <4>[ 0.000000] Lowering host1x maximum rate from 300000000 to 267000000
- <4>[ 0.000000] Lowering cbus maximum rate from 700000000 to 416000000
- <4>[ 0.000000] Lowering pll_c maximum rate from 1600000000 to 1066000000
- <4>[ 0.000000] Lowering ndflash maximum rate from 240000000 to 200000000
- <4>[ 0.000000] Lowering sbc1 maximum rate from 160000000 to 100000000
- <4>[ 0.000000] Lowering sbc2 maximum rate from 160000000 to 100000000
- <4>[ 0.000000] Lowering sbc3 maximum rate from 160000000 to 100000000
- <4>[ 0.000000] Lowering sbc4 maximum rate from 160000000 to 100000000
- <4>[ 0.000000] Lowering sbc5 maximum rate from 160000000 to 100000000
- <4>[ 0.000000] Lowering sbc6 maximum rate from 160000000 to 100000000
- <4>[ 0.000000] Lowering dsia maximum rate from 500000000 to 275000000
- <4>[ 0.000000] Lowering dsib maximum rate from 500000000 to 275000000
- <4>[ 0.000000] Lowering cpu_g maximum rate from 1700000000 to 1300000000
- <6>[ 0.000000] tegra dvfs: VDD_CPU nominal 1075mV, scaling enabled
- <6>[ 0.000000] tegra dvfs: VDD_CORE nominal 1300mV, scaling enabled
- <6>[ 0.000000] L310 cache controller enabled
- <6>[ 0.000000] l2x0: 8 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e080001, Cache size: 1048576 B
- <6>[ 0.000000] PERCPU: Embedded 7 pages/cpu @c1a46000 s6304 r8192 d14176 u32768
- <7>[ 0.000000] pcpu-alloc: s6304 r8192 d14176 u32768 alloc=8*4096
- <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 254212
- <5>[ 0.000000] Kernel command line: tegra_wdt.heartbeat=30 tegraid=30.1.3.0.0 mem=1022M@2048M android.commchip=0 vmalloc=128M androidboot.serialno=015d2d42db13fc16 video=tegrafb no_console_suspend=1 console=none debug_uartport=hsport usbcore.old_scheme_first=1 lp0_vec=8192@0xbddf9000 tegra_fbmem=8195200@0xabe01000 core_edp_mv=0 audio_codec=rt5640 board_info=f41:a00:1:44:2 tegraboot=sdmmc gpt gpt_sector=30785535 androidboot.bootloader=4.13
- <6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- <6>[ 0.000000] Memory: 1002MB = 1002MB total
- <5>[ 0.000000] Memory: 995788k/995788k available, 50740k reserved, 239608K highmem
- <5>[ 0.000000] Virtual kernel memory layout:
- <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- <5>[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
- <5>[ 0.000000] vmalloc : 0xf0800000 - 0xf8000000 ( 120 MB)
- <5>[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
- <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- <5>[ 0.000000] .text : 0xc0008000 - 0xc07f8000 (8128 kB)
- <5>[ 0.000000] .init : 0xc07f8000 - 0xc08438a0 ( 303 kB)
- <5>[ 0.000000] .data : 0xc0844000 - 0xc08886a0 ( 274 kB)
- <5>[ 0.000000] .bss : 0xc0932a14 - 0xc0a8ece8 (1393 kB)
- <6>[ 0.000000] NR_IRQS:800
- <6>[ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
- <6>[ 0.000191] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736)
- <6>[ 0.040067] pid_max: default: 32768 minimum: 301
- <6>[ 0.040249] Mount-cache hash table entries: 512
- <6>[ 0.040985] Initializing cgroup subsys cpuacct
- <6>[ 0.041046] Initializing cgroup subsys freezer
- <6>[ 0.041074] CPU: Testing write buffer coherency: ok
- <6>[ 0.041303] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
- <6>[ 0.221493] Brought up 4 CPUs
- <6>[ 0.221504] SMP: Total of 4 processors activated (3984.58 BogoMIPS).
- <6>[ 0.225319] print_constraints: dummy:
- <6>[ 0.225534] NET: Registered protocol family 16
- <6>[ 0.226375] host1x bus init
- <6>[ 0.226442] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- <6>[ 0.227023] [MISC]: pcbid=0x009e (projectid=0x00)
- <4>[ 0.228332] The pingroup KB_ROW0 was configured to RSVD3 instead of <UNKNOWN>
- <4>[ 0.229160] grouper_booting_info reg=3
- <4>[ 0.229167] grouper_booting_info-SW reboot
- <6>[ 0.229603] grouper_edp_init: CPU regulator 6000 mA
- <6>[ 0.230818] ram_console: got buffer at beb00000, size 100000
- <6>[ 0.230906] ram_console: found existing buffer, size 79745, start 79745
- <6>[ 0.452252] console [ram-1] enabled
- <4>[ 0.581269] [ELAN] Touch dirver register
- <6>[ 0.581348] grouper_modem_init
- <6>[ 0.581421] Registering gpio keys
- <4>[ 0.581919] grouper_camera_init: pmic_id= 0x0
- <6>[ 0.581994] mi1040 i2c_register_board_info
- <6>[ 0.582131] *** MPU START *** mpuirq_init...
- <6>[ 0.582325] *** MPU END *** mpuirq_init...
- <4>[ 0.582459] grouper_emc_init:mem_bootstrap_ad4=1 mem_bootstrap_ad5=0
- <6>[ 0.582637] tegra: validated EMC DFS table
- <4>[ 0.582712] grouper_emc_init: Nakasi_dvfs_Hynix_table_0430
- <6>[ 0.582801] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
- <6>[ 0.582932] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
- <6>[ 0.583072] hw-breakpoint: maximum watchpoint size is 4 bytes.
- <6>[ 0.583439] tegra_iovmm_register: added iovmm-smmu
- <6>[ 0.590643] bio: create slab <bio-0> at 0
- <6>[ 0.591409] vgaarb: loaded
- <4>[ 0.591555] i2c-core: driver [tps6591x] using legacy suspend method
- <4>[ 0.591690] i2c-core: driver [tps6591x] using legacy resume method
- <4>[ 0.591786] i2c-core: driver [tps80031] using legacy suspend method
- <4>[ 0.591917] i2c-core: driver [tps80031] using legacy resume method
- <4>[ 0.592041] i2c-core: driver [ricoh583] using legacy suspend method
- <4>[ 0.592173] i2c-core: driver [ricoh583] using legacy resume method
- <5>[ 0.592573] SCSI subsystem initialized
- <6>[ 0.593628] usbcore: registered new interface driver usbfs
- <6>[ 0.593781] usbcore: registered new interface driver hub
- <6>[ 0.593995] usbcore: registered new device driver usb
- <6>[ 0.594143] tegra-otg tegra-otg: otg transceiver registered
- <4>[ 0.596134] [MAX77663 probe]:CID4=23!
- <6>[ 0.599394] Wake18 for irq=118
- <6>[ 0.599468] Enabling wake18
- <6>[ 0.601912] print_constraints: max77663_sd0: 600 <--> 3387 mV at 1025 mV normal standby
- <6>[ 0.602925] print_constraints: max77663_sd1: 800 <--> 1587 mV at 1200 mV normal standby
- <6>[ 0.603994] print_constraints: max77663_sd2: 1800 mV normal standby
- <6>[ 0.605107] print_constraints: max77663_sd3: 600 <--> 3387 mV at 1350 mV normal standby
- <6>[ 0.606130] print_constraints: max77663_ldo0: 800 <--> 2350 mV at 1000 mV normal standby
- <6>[ 0.606280] set_supply: max77663_ldo0: supplied by max77663_sd3
- <6>[ 0.607376] print_constraints: max77663_ldo1: 800 <--> 2350 mV at 1200 mV normal standby
- <6>[ 0.607470] set_supply: max77663_ldo1: supplied by max77663_sd3
- <6>[ 0.608554] print_constraints: max77663_ldo2: 800 <--> 3950 mV at 2800 mV normal standby
- <6>[ 0.609594] print_constraints: max77663_ldo3: 800 <--> 3950 mV at 3000 mV normal standby
- <6>[ 0.610913] print_constraints: max77663_ldo4: 800 <--> 1587 mV at 1000 mV normal standby
- <6>[ 0.611975] print_constraints: max77663_ldo5: 800 <--> 2800 mV at 2800 mV normal standby
- <6>[ 0.613036] print_constraints: max77663_ldo6: 800 <--> 3950 mV at 3300 mV normal standby
- <6>[ 0.614062] print_constraints: max77663_ldo7: 800 <--> 3950 mV at 1200 mV normal standby
- <6>[ 0.614211] set_supply: max77663_ldo7: supplied by max77663_sd3
- <6>[ 0.615291] print_constraints: max77663_ldo8: 800 <--> 3950 mV at 1200 mV normal standby
- <6>[ 0.615383] set_supply: max77663_ldo8: supplied by max77663_sd3
- <6>[ 0.615787] max77663 register misc device for I2C stress test rc=0
- <6>[ 0.621086] Advanced Linux Sound Architecture Driver Version 1.0.24.
- <6>[ 0.621629] Bluetooth: Core ver 2.16
- <6>[ 0.621739] NET: Registered protocol family 31
- <6>[ 0.621871] Bluetooth: HCI device and connection manager initialized
- <6>[ 0.621945] Bluetooth: HCI socket layer initialized
- <6>[ 0.622075] Bluetooth: L2CAP socket layer initialized
- <6>[ 0.622163] Bluetooth: SCO socket layer initialized
- <6>[ 0.622580] cfg80211: Calling CRDA to update world regulatory domain
- <6>[ 0.622824] NFC: NFC Core ver 0.1
- <6>[ 0.622933] NET: Registered protocol family 39
- <6>[ 0.623221] print_constraints: fixed_reg_en_3v3_sys_a01: 3300 mV normal standby
- <6>[ 0.623634] print_constraints: fixed_reg_en_avdd_hdmi_usb_a01: 3300 mV normal standby
- <6>[ 0.623776] set_supply: fixed_reg_en_avdd_hdmi_usb_a01: supplied by fixed_reg_en_3v3_sys_a01
- <6>[ 0.624110] print_constraints: fixed_reg_en_1v8_cam: 1800 mV normal standby
- <6>[ 0.624197] set_supply: fixed_reg_en_1v8_cam: supplied by max77663_sd2
- <6>[ 0.624544] print_constraints: fixed_reg_en_vddio_vid: 5000 mV normal standby
- <6>[ 0.624846] print_constraints: fixed_reg_en_vdd_pnl: 3300 mV normal standby
- <6>[ 0.624929] set_supply: fixed_reg_en_vdd_pnl: supplied by fixed_reg_en_3v3_sys_a01
- <6>[ 0.625276] print_constraints: fixed_reg_en_vdd_com: 3300 mV normal standby
- <6>[ 0.625416] set_supply: fixed_reg_en_vdd_com: supplied by fixed_reg_en_3v3_sys_a01
- <6>[ 0.625702] print_constraints: fixed_reg_en_3v3_fuse: 3300 mV normal standby
- <6>[ 0.625845] set_supply: fixed_reg_en_3v3_fuse: supplied by fixed_reg_en_3v3_sys_a01
- <6>[ 0.626183] print_constraints: fixed_reg_cdc_en: 1200 mV normal standby
- <6>[ 0.626270] set_supply: fixed_reg_cdc_en: supplied by max77663_sd2
- <6>[ 0.626528] JRCU: callback processing now allowed.
- <6>[ 0.626539] JRCU: callback processing via daemon started.
- <6>[ 0.627341] tegra: started io power detection dynamic control
- <6>[ 0.627417] tegra: NO_IO_POWER setting 0x1200
- <6>[ 0.627492] Switching to clocksource timer_us
- <4>[ 0.627642] stop_machine_cpu_stop smp=1
- <4>[ 0.627650] stop_machine_cpu_stop smp=2
- <4>[ 0.627658] stop_machine_cpu_stop smp=3
- <4>[ 0.627664] stop_machine_cpu_stop smp=0
- <6>[ 0.628263] nvmap_page_pool_init: nvmap uc page pool size=31118 pages
- <6>[ 0.631288] Switched to NOHz mode on CPU #0
- <6>[ 0.631473] Switched to NOHz mode on CPU #3
- <6>[ 0.631481] Switched to NOHz mode on CPU #2
- <6>[ 0.631494] Switched to NOHz mode on CPU #1
- <6>[ 0.730994] nvmap_page_pool_init: nvmap wc page pool size=31118 pages
- <6>[ 0.837600] nvmap_page_pool_init: nvmap iwb page pool size=31118 pages
- <6>[ 0.988220] tegra-nvmap tegra-nvmap: created carveout iram (255KiB)
- <6>[ 0.989503] NET: Registered protocol family 2
- <6>[ 0.989749] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- <6>[ 0.990308] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- <6>[ 0.991951] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
- <6>[ 0.992847] TCP: Hash tables configured (established 131072 bind 65536)
- <6>[ 0.992978] TCP reno registered
- <6>[ 0.993053] UDP hash table entries: 512 (order: 2, 16384 bytes)
- <6>[ 0.993205] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- <6>[ 0.993537] NET: Registered protocol family 1
- <7>[ 0.993685] PCI: CLS 0 bytes, default 32
- <6>[ 0.993896] Unpacking initramfs...
- <6>[ 1.061619] Freeing initrd memory: 1268K
- <6>[ 1.062722] host1x host1x: initialized
- <6>[ 1.062876] PMU: registered new PMU device of type 0
- <6>[ 1.063276] cpu-tegra: init EDP limit: 1250 MHz
- <4>[ 1.079883] highmem bounce pool size: 64 pages
- <6>[ 1.080126] ashmem: initialized
- <6>[ 1.080809] NTFS driver 2.1.30 [Flags: R/W].
- <6>[ 1.081020] fuse init (API version 7.17)
- <6>[ 1.081214] Registering char device tf_driver (122:0)
- <6>[ 1.081439] TF : INFO 00000001 00:00:00.000 ------ ------ Kernel --------- Booting... (t=00:00:05.938) TFNXBF01.15.36932 /Trusted-Logic
- <6>[ 1.082917] io scheduler noop registered
- <6>[ 1.082996] io scheduler deadline registered (default)
- <6>[ 1.083069] io scheduler row registered
- <6>[ 1.083250] io scheduler cfq registered
- <6>[ 1.084153] mpe mpe: initialized
- <6>[ 1.085315] gr3d gr3d: initialized
- <6>[ 1.085598] dsi dsi: initialized
- <6>[ 1.086375] gr2d gr2d: initialized
- <6>[ 1.086609] isp isp: initialized
- <6>[ 1.086890] vi vi: initialized
- <4>[ 1.087506] Disp: diff_msec= 5944
- <6>[ 1.338528] tegradc tegradc.0: probed
- <6>[ 1.338854] tegradc tegradc.0: probed
- <6>[ 1.339205] Wake4 for irq=335
- <6>[ 1.339716] nvhdcp: using "always on" policy.
- <6>[ 1.340118] tegradc tegradc.1: probed
- <6>[ 1.340481] tegradc tegradc.1: probed
- <6>[ 1.341026] tegra_uart.1: ttyHS1 at MMIO 0x70006040 (irq = 69) is a TEGRA_UART
- <6>[ 1.408637] Registered UART port ttyHS1
- <6>[ 1.408788] tegra_uart.2: ttyHS2 at MMIO 0x70006200 (irq = 78) is a TEGRA_UART
- <6>[ 1.528683] Registered UART port ttyHS2
- <6>[ 1.528829] tegra_uart.3: ttyHS3 at MMIO 0x70006300 (irq = 122) is a TEGRA_UART
- <6>[ 1.648723] Registered UART port ttyHS3
- <6>[ 1.648869] tegra_uart.4: ttyHS4 at MMIO 0x70006400 (irq = 123) is a TEGRA_UART
- <6>[ 1.768763] Registered UART port ttyHS4
- <6>[ 1.768922] Initialized tegra uart driver
- <6>[ 1.771689] loop: module loaded
- <4>[ 1.771911] i2c-core: driver [apds9802als] using legacy suspend method
- <4>[ 1.771988] i2c-core: driver [apds9802als] using legacy resume method
- <4>[ 1.772199] nct1008_probe+
- <6>[ 1.772287] nct1008 4-004c: no regulator found for vdd. Assuming vdd is always powered
- <6>[ 1.774655] nct1008 register misc device for I2C stress test rc=0
- <6>[ 1.774922] nct1008 4-004c: nct1008_probe: initialized
- <4>[ 1.776057] nct1008_get_temp: ret temp=47C
- <4>[ 1.776414] nct1008_probe-
- <4>[ 1.776520] i2c-core: driver [nct1008] using legacy suspend method
- <4>[ 1.776653] i2c-core: driver [nct1008] using legacy resume method
- <4>[ 1.776796] bcm4330_rfkill_probe: can't find bcm4330_32k_clk. assuming 32k clock to chip
- <4>[ 1.776932] bcm4330_rfkill_probe : can't find reset gpio.
- <3>[ 1.777252] vibrator_init:Couldn't get regulator vdd_vbrtr
- <6>[ 1.777379] Loading pn544 driver
- <6>[ 1.777542] pn544_probe : requesting IRQ 408
- <6>[ 1.777951] PPP generic driver version 2.4.2
- <6>[ 1.778166] PPP Deflate Compression module registered
- <6>[ 1.778302] PPP BSD Compression module registered
- <6>[ 1.779095] PPP MPPE Compression module registered
- <6>[ 1.779175] NET: Registered protocol family 24
- <6>[ 1.779685] tun: Universal TUN/TAP device driver, 1.6
- <6>[ 1.779761] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- <6>[ 1.780018] usbcore: registered new interface driver asix
- <6>[ 1.780126] usbcore: registered new interface driver cdc_ether
- <6>[ 1.780303] usbcore: registered new interface driver smsc95xx
- <6>[ 1.780410] usbcore: registered new interface driver cdc_subset
- <6>[ 1.780552] cdc_ncm: 04-Aug-2011
- <6>[ 1.780664] usbcore: registered new interface driver cdc_ncm
- <6>[ 1.780842] usbcore: registered new interface driver bb_raw_ip_net
- <5>[ 1.780927] smb347_charger: [smb347_init] project_id=0, pcba_ver=3, dock_in_gpio=164
- <6>[ 1.783308] [charger] Disable AICL, retval=93 setting=83
- <6>[ 1.783711] [charger] set cahrger limmit, limit=900 retval =73 setting=73
- <6>[ 1.784168] [charger] re-enable AICL, setting=93
- <4>[ 1.808861] GPIO pin irq 388 requested ok, smb347_DOCK_IN# = H
- <6>[ 1.808999] Wake1 for irq=393
- <4>[ 1.809097] GPIO pin irq 393 requested ok, smb347_INOK = L
- <4>[ 1.809215] i2c-core: driver [smb347] using legacy suspend method
- <4>[ 1.809289] i2c-core: driver [smb347] using legacy resume method
- <5>[ 1.809450] bq27541_probe + client->addr= 55
- <5>[ 1.810187] bq27541_get_psp status: Discharging ret= 0x0101
- <5>[ 1.810845] bq27541_get_psp voltage_now= 3781000 uV
- <5>[ 1.811548] bq27541_get_psp current_now= -315000 uA
- <5>[ 1.812191] bq27541_get_capacity = 40% ret= 44
- <5>[ 1.812894] bq27541_get_psp charge_now = 1776000 uAh
- <5>[ 1.813539] bq27541_get_psp energy_now = 64740000 uWh
- <5>[ 1.814242] bq27541_get_psp temperature= 320 (0.1óXC)
- <6>[ 1.814908] Wake25 for irq=372
- <5>[ 1.815040] bq27541_get_psp status: Discharging ret= 0x0101
- <5>[ 1.815231] setup_low_battery_irq irq=372, LL_BAT_T30=0
- <6>[ 1.815306] Wake25 for irq=372
- <6>[ 1.815377] Enabling wake25
- <6>[ 1.815449] gpio bank wake found: wake25 for irq=87
- <6>[ 1.815520] Enabling wake25
- <6>[ 1.815646] The USB cable status = 0
- <5>[ 1.815779] bq27541_probe - bq27541-battery driver registered
- <4>[ 1.815884] i2c-core: driver [bq27541-battery] using legacy suspend method
- <5>[ 1.816048] bq27541_get_psp voltage_now= 3781000 uV
- <4>[ 1.816150] i2c-core: driver [bq27541-battery] using legacy resume method
- <6>[ 1.816291] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- <3>[ 1.820545] Timed out waiting for lock bit on pll pll_u
- <5>[ 1.820733] bq27541_get_psp current_now= -315000 uA
- <5>[ 1.821439] bq27541_get_capacity = 40% ret= 44
- <5>[ 1.822149] bq27541_get_psp charge_now = 1776000 uAh
- <5>[ 1.822942] bq27541_get_psp energy_now = 64740000 uWh
- <5>[ 1.823642] bq27541_get_psp temperature= 320 (0.1óXC)
- <6>[ 1.824956] tegra-ehci tegra-ehci.1: Tegra EHCI Host Controller
- <6>[ 1.825185] tegra-ehci tegra-ehci.1: new USB bus registered, assigned bus number 1
- <6>[ 1.848039] tegra-ehci tegra-ehci.1: irq 53, io mem 0x7d004000
- <6>[ 1.868026] tegra-ehci tegra-ehci.1: USB 2.0 started, EHCI 1.00
- <6>[ 1.868163] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- <6>[ 1.868297] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[ 1.868429] usb usb1: Product: Tegra EHCI Host Controller
- <6>[ 1.868502] usb usb1: Manufacturer: Linux 3.1.10-franco.Kernel ehci_hcd
- <6>[ 1.868632] usb usb1: SerialNumber: tegra-ehci.1
- <6>[ 1.868996] hub 1-0:1.0: USB hub found
- <6>[ 1.869090] hub 1-0:1.0: 1 port detected
- <6>[ 1.869429] Wake40 for irq=53
- <6>[ 1.869504] Enabling wake40
- <6>[ 1.869744] usbcore: registered new interface driver cdc_acm
- <6>[ 1.869876] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- <6>[ 1.869987] usbcore: registered new interface driver cdc_wdm
- <6>[ 1.870119] Initializing USB Mass Storage driver...
- <6>[ 1.870264] usbcore: registered new interface driver usb-storage
- <6>[ 1.870392] USB Mass Storage support registered.
- <6>[ 1.870522] usbcore: registered new interface driver libusual
- <6>[ 1.870752] usbcore: registered new interface driver usbserial
- <6>[ 1.870826] usbserial: USB Serial Driver core
- <6>[ 1.873843] usbcore: registered new interface driver baseband_usb_58b_41_1
- <6>[ 1.873957] USB Serial support registered for GSM modem (1-port)
- <6>[ 1.874189] usbcore: registered new interface driver option
- <6>[ 1.874262] option: v0.7.2:USB Driver for GSM modems
- <6>[ 1.874419] USB Serial support registered for pl2303
- <6>[ 1.874543] usbcore: registered new interface driver pl2303
- <6>[ 1.874673] pl2303: Prolific PL2303 USB to serial adaptor driver
- <6>[ 1.874748] NVidia Tegra High-Speed USB SOC Device Controller driver (Apr 20, 2007)
- <6>[ 1.874882] read_hw_version project_id = 0X0, pcb_id = 0X3
- <6>[ 1.875124] phy->instance = 0, phy->xcvr_setup_value = 56
- <4>[ 1.875272] create_regulator: fixed_reg_en_avdd_hdmi_usb_a01: Failed to create debugfs directory
- <6>[ 1.875404] tegra_usb_phy_open instance 0 MAX77663_IRQ_ACOK_RISING
- <6>[ 1.878238] fsl-tegra-udc fsl-tegra-udc: usb_bat_chg regulator not registered: USB charging will not be enabled
- <6>[ 1.898039] tegra-otg tegra-otg: SUSPEND --> PERIPHERAL
- <6>[ 1.898177] fsl_vbus_session(): vbus_active = 0 and is_active = 1
- <6>[ 1.900385] android_usb gadget: Mass Storage Function, version: 2009/09/11
- <6>[ 1.900523] android_usb gadget: Number of LUNs=1
- <6>[ 1.900598] lun0: LUN: removable file: (no medium)
- <4>[ 1.900913] Gadget Android: controller 'fsl-tegra-udc' not recognized
- <6>[ 1.900995] android_usb gadget: android_usb ready
- <6>[ 1.901067] fsl-tegra-udc: bind to driver android_usb
- <6>[ 1.901280] usbcore: registered new interface driver xpad
- <6>[ 1.901396] usbcore: registered new interface driver usb_acecad
- <6>[ 1.901528] acecad: v3.2:USB Acecad Flair tablet driver
- <6>[ 1.901634] usbcore: registered new interface driver aiptek
- <6>[ 1.901763] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
- <6>[ 1.901891] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
- <6>[ 1.901997] usbcore: registered new interface driver gtco
- <4>[ 1.902126] GTCO usb driver version: 2.00.0006
- <6>[ 1.902230] usbcore: registered new interface driver hanwang
- <6>[ 1.902457] usbcore: registered new interface driver kbtab
- <6>[ 1.902528] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
- <6>[ 1.902698] usbcore: registered new interface driver wacom
- <6>[ 1.902772] wacom: v1.52:USB Wacom tablet driver
- <4>[ 1.902902] [ektf3k]:[elan] elan_ktf3k_ts_init
- <4>[ 1.903069] [ektf3k]:[ELAN] Start HW reset!
- <4>[ 2.158087] [ektf3k]:The boot code is new!
- <6>[ 2.308024] INOK=L
- <5>[ 2.308288] smb347_charger: [cable_type_detect] Reg39 : 0x10
- <5>[ 2.308543] smb347_charger: [cable_type_detect] Reg3F : 0xc0
- <5>[ 2.308674] smb347_charger: [cable_type_detect] USB_IN
- <5>[ 2.308938] smb347_charger: [cable_type_detect] Reg3E : 0x0c
- <6>[ 2.309070] Cable: SDP
- <4>[ 2.309140] ========================================================
- <4>[ 2.309269] battery_callback usb_cable_state = 1
- <4>[ 2.309339] ========================================================
- <4>[ 2.309410] battery_callback cable_wake_lock 5 sec...
- <4>[ 2.309415]
- <6>[ 2.898022] cable_detection_work_handler(): vbus_active = 0 and is_active = 1
- <6>[ 2.898218] The USB cable is connected
- <4>[ 2.998176] [ektf3k]:[elan] __hello_packet_handler: hello packet 55:55:55:55
- <4>[ 2.998307] [ektf3k]:[elan] hello packet's rc = 0
- <4>[ 3.209872] [ektf3k]:[elan] __fw_packet_handler: firmware version: 0xb018
- <4>[ 3.211838] [ektf3k]:[elan] __fw_packet_handler: X resolution: 0x0078
- <4>[ 3.213761] [ektf3k]:[elan] __fw_packet_handler: Y resolution: 0x00c6
- <4>[ 3.232691] [ektf3k]:[elan] __fw_packet_handler: firmware id: 0x3021
- <4>[ 3.232770] [ektf3k]:[Elan] Max X=2111, Max Y=1279
- <6>[ 3.233047] input: elan-touchscreen as /devices/virtual/input/input0
- <4>[ 3.233242] [ektf3k]:The firmware was version 0xB018 and id:0x3021
- <4>[ 3.233400] [ektf3k]: /proc/ektf_dbg created
- <4>[ 3.233670] [ektf3k]:[elan] Start touchscreen elan-touchscreen in interrupt mode
- <4>[ 3.233862] [ektf3k]:[ELAN]misc_register finished!!
- <6>[ 3.233937] elan-ktf3k 1-0010: Update power source to 1
- <6>[ 3.234371] in function ____rmi_bus_init____
- <6>[ 3.234480] rmi_bus_init: successfully registered RMI bus.
- <6>[ 3.234659] rmi_spi_init: registering synaptics spi driver (ref=124)
- <6>[ 3.234732] driver.owner = 0x0
- <6>[ 3.234861] driver.name = rmi_spi
- <6>[ 3.234932] id_table[0].name = rmi
- <6>[ 3.235060] id_table[1].name = rmi_spi
- <6>[ 3.235130] probe function ptr = 0xc0630df4
- <6>[ 3.235282] in function ____rmi_register_driver____
- <6>[ 3.235377] in function ____rmi_get_function_handler____
- <6>[ 3.235450] in function ____rmi_get_function_handler____
- <6>[ 3.235580] in function ____rmi_get_function_handler____
- <6>[ 3.235658] in function ____rmi_get_function_handler____
- <6>[ 3.235788] in function ____rmi_get_function_handler____
- <6>[ 3.235859] in function ____rmi_get_function_handler____
- <6>[ 3.236225] lid_init+ #####
- <5>[ 3.236300] hall_sensor: [lid_init] start LID init.....
- <6>[ 3.236671] input: lid_input as /devices/virtual/input/input1
- <6>[ 3.236888] Wake28 for irq=374
- <6>[ 3.236999] Wake28 for irq=374
- <6>[ 3.237129] Enabling wake28
- <3>[ 3.237201] CAP1106: [cap1106_init] Cap1106 driver doesn't support this project
- <6>[ 3.267269] using rtc device, max77663-rtc, for alarms
- <6>[ 3.267360] max77663-rtc max77663-rtc.0: rtc core: registered max77663-rtc as rtc0
- <6>[ 3.267991] i2c /dev entries driver
- <6>[ 3.268509] Linux video capture interface: v2.00
- <6>[ 3.268672] usbcore: registered new interface driver uvcvideo
- <6>[ 3.268802] USB Video Class driver (1.1.1)
- <6>[ 3.268942] trpc_sema_init: registered misc dev 10:45
- <6>[ 3.269137] trpc_node_register: Adding 'local' to node list
- <6>[ 3.270335] nvavp nvavp: allocated IOVM at ff00000 for AVP os
- <6>[ 3.270740] tegra_camera tegra_camera: tegra_camera_probe
- <6>[ 3.271074] sensor_init+ #####
- <6>[ 3.271177] mi1040 sensor_probe
- <6>[ 3.271433] sensor_init- #####
- <6>[ 3.271617] al3010_init+ #####
- <4>[ 3.271690] light sensor info : al3010 init
- <4>[ 3.272587] light sensor info : al3010 probe successed
- <6>[ 3.272667] al3010 2-001c: driver version 1.0 enabled
- <4>[ 3.272907] i2c-core: driver [al3010] using legacy suspend method
- <4>[ 3.273041] i2c-core: driver [al3010] using legacy resume method
- <6>[ 3.273179] al3010_init- #####
- <6>[ 3.273535] device-mapper: uevent: version 1.0.3
- <6>[ 3.273727] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
- <6>[ 3.273890] Bluetooth: HCI UART driver ver 2.2
- <6>[ 3.273963] Bluetooth: HCI H4 protocol initialized
- <6>[ 3.274091] Bluetooth: HCILL protocol initialized
- <6>[ 3.274162] Bluetooth: BlueSleep Mode Driver Ver 1.1
- <6>[ 3.274344] Wake7 for irq=390
- <6>[ 3.275026] cpuidle: using governor ladder
- <6>[ 3.275426] cpuidle: using governor menu
- <6>[ 3.275611] sdhci: Secure Digital Host Controller Interface driver
- <6>[ 3.275684] sdhci: Copyright(c) Pierre Ossman
- <6>[ 3.275813] sdhci-pltfm: SDHCI platform and OF driver helper
- <6>[ 3.275884] sdhci_tegra_init+ #####
- <6>[ 3.276061] sdhci-tegra sdhci-tegra.3: Error: tegra3 io dpd not supported for sdhci-tegra.3
- <4>[ 3.277213] mmc0: Invalid maximum block size, assuming 512 bytes
- <7>[ 3.278496] Registered led device: mmc0::
- <6>[ 3.281872] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA
- <6>[ 3.282067] sdhci-tegra sdhci-tegra.2: Error: tegra3 io dpd not supported for sdhci-tegra.2
- <4>[ 3.283159] mmc1: Invalid maximum block size, assuming 512 bytes
- <7>[ 3.284419] Registered led device: mmc1::
- <6>[ 3.286660] mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA
- <6>[ 3.286835] sdhci_tegra_init- #####
- <7>[ 3.287160] Registered led device: statled
- <6>[ 3.288638] tegra-se tegra-se: tegra_se_probe: complete
- <6>[ 3.290292] usbcore: registered new interface driver usbhid
- <6>[ 3.290433] usbhid: USB HID core driver
- <6>[ 3.290827] logger: created 256K log 'log_main'
- <6>[ 3.290968] logger: created 256K log 'log_events'
- <6>[ 3.291157] logger: created 256K log 'log_radio'
- <6>[ 3.291286] logger: created 256K log 'log_system'
- <6>[ 3.379780] [mmc]:mmc_decode_cid:113 cid.prv 0x1
- <6>[ 3.391371] [mmc]:mmc_read_ext_csd:285 ext_csd.sectors 0x1d5c000 prod_name HAG2e BOOT_MULTI 0x10
- <6>[ 3.397119] mmc0: new high speed DDR MMC card at address 0001
- <6>[ 3.397330] mmcblk mmc0:0001: Card claimed for testing.
- <6>[ 3.397717] mmcblk0: mmc0:0001 HAG2e 14.6 GiB
- <6>[ 3.397980] mmcblk0boot0: mmc0:0001 HAG2e partition 1 2.00 MiB
- <6>[ 3.398332] mmcblk0boot1: mmc0:0001 HAG2e partition 2 2.00 MiB
- <4>[ 3.400570] Primary GPT is invalid, using alternate GPT.
- <6>[ 3.400749] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
- <6>[ 3.415697] mmcblk0boot1: unknown partition table
- <6>[ 3.418780] mmcblk0boot0: unknown partition table
- <6>[ 3.419094] [mmc]:mmc_rescan_try_freq:1907 mmc0: eMMC completed
- <6>[ 3.838864] inv_mpu_probe: Probe name mpu6050
- <6>[ 3.839000] i2c i2c-2: MPU6050 is ready to go!
- <4>[ 3.839191] i2c-core: driver [LTR_558ALS] using legacy suspend method
- <4>[ 3.839323] i2c-core: driver [LTR_558ALS] using legacy resume method
- <6>[ 3.840233] inv_ami306_probe: Probe name ami306
- <6>[ 3.840401] RIL: [ril_init] RIL init
- <3>[ 3.840474] RIL: [ril_init] Ril driver doesn't support this project
- <5>[ 4.308626] bq27541_get_psp status: Charging ret= 0x0101
- <5>[ 4.309337] bq27541_get_psp voltage_now= 3764000 uV
- <5>[ 4.309985] bq27541_get_psp current_now= -180000 uA
- <5>[ 4.310679] bq27541_get_capacity = 40% ret= 44
- <5>[ 4.311324] bq27541_get_psp charge_now = 1776000 uAh
- <5>[ 4.312022] bq27541_get_psp energy_now = 64740000 uWh
- <5>[ 4.312670] bq27541_get_psp temperature= 320 (0.1óXC)
- <6>[ 4.338024] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
- <6>[ 4.378411] usbcore: registered new interface driver snd-usb-audio
- <4>[ 4.378951] rt5640_modinit
- <4>[ 4.379054] rt5640_i2c_probe
- <6>[ 4.518774] DSP version code = 0x501a
- <4>[ 4.519016] ************************realtek_ce_init_hwdep*************************************
- <4>[ 4.519156] do_rt5640_dsp_set_mode mode=0
- <6>[ 4.519297] rt5640 4-001c: w->name=SDI1 TX Mux
- <6>[ 4.519372] rt5640 4-001c: path->name=IF2 path->connect=0
- <6>[ 4.519445] rt5640 4-001c: path->name=IF1 path->connect=1
- <6>[ 4.519629] rt5640 4-001c: w->name=Stereo DAC MIXL
- <6>[ 4.519707] rt5640 4-001c: path->name=DAC L1 Switch connect=1
- <6>[ 4.519871] rt5640 4-001c: w->name=Stereo DAC MIXL
- <6>[ 4.519945] rt5640 4-001c: path->name=DAC L2 Switch connect=0
- <6>[ 4.520269] rt5640 4-001c: w->name=Stereo DAC MIXR
- <6>[ 4.520347] rt5640 4-001c: path->name=DAC R1 Switch connect=1
- <6>[ 4.520516] rt5640 4-001c: w->name=Stereo DAC MIXR
- <6>[ 4.520591] rt5640 4-001c: path->name=DAC R2 Switch connect=0
- <6>[ 4.520918] rt5640 4-001c: w->name=Stereo ADC MIXL
- <6>[ 4.520997] rt5640 4-001c: path->name=ADC1 Switch connect=1
- <6>[ 4.521167] rt5640 4-001c: w->name=Stereo ADC MIXR
- <6>[ 4.521244] rt5640 4-001c: path->name=ADC1 Switch connect=1
- <6>[ 4.521352] rt5640 4-001c: w->name=Stereo ADC MIXL
- <6>[ 4.521486] rt5640 4-001c: path->name=ADC2 Switch connect=1
- <6>[ 4.521591] rt5640 4-001c: w->name=Stereo ADC MIXR
- <6>[ 4.521725] rt5640 4-001c: path->name=ADC2 Switch connect=1
- <6>[ 4.521832] rt5640 4-001c: w->name=Mono ADC MIXL
- <6>[ 4.521966] rt5640 4-001c: path->name=ADC2 Switch connect=0
- <6>[ 4.522071] rt5640 4-001c: w->name=Mono ADC MIXR
- <6>[ 4.522204] rt5640 4-001c: path->name=ADC2 Switch connect=0
- <6>[ 4.530374] asoc: rt5640-aif1 <-> tegra30-i2s.1 mapping ok
- <6>[ 4.533423] asoc: dit-hifi <-> tegra30-spdif mapping ok
- <6>[ 4.537826] asoc: dit-hifi <-> tegra30-i2s.3 mapping ok
- <6>[ 4.538611] headset_init+ #####
- <4>[ 4.538742] HEADSET: Headset detection init
- <4>[ 4.539075] HEADSET: Headset detection mode
- <4>[ 4.539150] HEADSET: Config LineOut detection gpio
- <7>[ 4.539281] gpio_request: gpio-179 (lineout_int) status -16
- <4>[ 4.539354] HEADSET: Config Headset Button detection gpio
- <7>[ 4.539483] gpio_request: gpio-186 (btn_INT) status -16
- <4>[ 4.539554] HEADSET: Config uart<->headphone gpio
- <4>[ 4.539683] HEADSET: Config Jack-in detection gpio
- <4>[ 4.539753] HEADSET: Turn on micbias power
- <6>[ 4.539889] Wake12 for irq=402
- <6>[ 4.540019] Wake12 for irq=402
- <6>[ 4.540090] Enabling wake12
- <6>[ 4.540162] gpio bank wake found: wake12 for irq=119
- <6>[ 4.540290] Enabling wake12
- <4>[ 4.558022] HEADSET: Turn off micbias power
- <6>[ 4.558116] headset_init- #####
- <6>[ 4.558245] ALSA device list:
- <6>[ 4.558316] #0: HDA NVIDIA Tegra at 0x70038000 irq 113
- <6>[ 4.558388] #1: tegra-rt5640
- <6>[ 4.558621] GACT probability NOT on
- <6>[ 4.558700] Mirror/redirect action on
- <6>[ 4.558773] u32 classifier
- <6>[ 4.558843] Actions configured
- <6>[ 4.558972] Netfilter messages via NETLINK v0.30.
- <6>[ 4.559109] nf_conntrack version 0.5.0 (15579 buckets, 62316 max)
- <6>[ 4.559515] ctnetlink v0.93: registering with nfnetlink.
- <6>[ 4.559628] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- <6>[ 4.559760] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- <6>[ 4.560142] xt_time: kernel timezone is -0000
- <6>[ 4.560432] ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 4.560701] arp_tables: (C) 2002 David S. Miller
- <6>[ 4.560883] TCP bic registered
- <6>[ 4.560957] TCP cubic registered
- <6>[ 4.561028] TCP westwood registered
- <6>[ 4.561099] TCP highspeed registered
- <6>[ 4.561227] TCP hybla registered
- <6>[ 4.561298] TCP htcp registered
- <6>[ 4.561368] TCP vegas registered
- <6>[ 4.561496] TCP veno registered
- <6>[ 4.561566] TCP scalable registered
- <6>[ 4.561636] TCP lp registered
- <6>[ 4.561706] TCP yeah registered
- <6>[ 4.561833] TCP illinois registered
- <6>[ 4.562019] NET: Registered protocol family 10
- <6>[ 4.562852] Mobile IPv6
- <6>[ 4.563006] ip6_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 4.563243] IPv6 over IPv4 tunneling driver
- <6>[ 4.564163] NET: Registered protocol family 17
- <6>[ 4.564314] NET: Registered protocol family 15
- <6>[ 4.564508] Bluetooth: RFCOMM TTY layer initialized
- <6>[ 4.564649] Bluetooth: RFCOMM socket layer initialized
- <6>[ 4.564722] Bluetooth: RFCOMM ver 1.11
- <6>[ 4.564795] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- <6>[ 4.564923] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <6>[ 4.565163] NET: Registered protocol family 37
- <6>[ 4.565295] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
- <5>[ 4.565463] Registering SWP/SWPB emulation handler
- <6>[ 4.565536] Tegra Hotplug driver started.
- <4>[ 4.575271] Do not disable PWM clock when kernel inits
- <4>[ 4.575421] Disabling clocks left on by bootloader:
- <4>[ 4.575492] fuse_burn
- <4>[ 4.575570] cclk_lp
- <4>[ 4.575697] pll_x_out0
- <4>[ 4.575768] pll_d2_out0
- <4>[ 4.575837] pll_d_out0
- <4>[ 4.575908] pll_p_out2
- <4>[ 4.575982] pll_c_out1
- <4>[ 4.576055] pll_m_out1
- <6>[ 4.576237] CPU rate: 1000 MHz
- <3>[ 4.576352] tegra_fuse_program_init: no vdd_fuse. fuse write disabled
- <4>[ 4.576735] tegra_dvfs: vdd_cpu: stats above 1087 mV will be squashed
- <4>[ 4.576841] tegra_dvfs: vdd_core: stats above 1437 mV will be squashed
- <4>[ 4.577160] tegra3_dvfs: minimum cap.cbus rate 228000000 requires 1000 mV
- <6>[ 4.577378] tegra dvfs: tegra sysfs cap interface is initialized
- <6>[ 4.577746] tegra_actmon.emc: Completed initialization (0)
- <6>[ 4.578055] tegra_actmon.avp: Completed initialization (0)
- <4>[ 4.579103] regulator_init_complete: fixed_reg_cdc_en: incomplete constraints, leaving on
- <4>[ 4.579247] regulator_init_complete: max77663_ldo8: incomplete constraints, leaving on
- <4>[ 4.579325] regulator_init_complete: max77663_ldo4: incomplete constraints, leaving on
- <6>[ 4.579588] tegra_hotplug_control_init misc_register(tegra_hotplug_control)
- <4>[ 4.579852] ## wifi_probe
- <4>[ 4.579928] wifi_set_power = 1
- <3>[ 4.579998] Powering on wifi
- <4>[ 4.880455] wifi_set_carddetect = 1
- <4>[ 4.881788]
- <4>[ 4.881792] Dongle Host Driver, version 5.90.195.104
- <4>[ 4.881796] Compiled in drivers/net/wireless/bcmdhd on Apr 14 2013 at 01:08:23
- <6>[ 4.931877] mmc1: new high speed SDIO card at address 0001
- <4>[ 4.932769] F1 signature read @0x18000000=0x16044330
- <4>[ 4.936673] DHD: dongle ram size is set to 294912(orig 294912)
- <4>[ 4.937327] wl_create_event_handler thr:65 started
- <4>[ 4.938184] p2p0: P2P Interface Registered
- <4>[ 4.938344] dhd_attach thr:66 started
- <4>[ 4.938545] dhd_attach thr:67 started
- <4>[ 4.938693] dhd_attach thr:68 started
- <4>[ 4.938832] dhd_attach thr:69 started
- <4>[ 4.939586] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
- <6>[ 4.939686] [mmc]:mmc_rescan_try_freq:1903 mmc1: sdio completed
- <4>[ 4.939833] wifi_set_power = 0
- <3>[ 4.939904] Powering off wifi
- <4>[ 5.240285] =========== WLAN placed in RESET ========
- <6>[ 5.240518] Wake24 for irq=392
- <6>[ 5.240878] input: gpio-keys as /devices/platform/gpio-keys.0/input/input2
- <6>[ 5.255722] max77663-rtc max77663-rtc.0: setting system clock to 2013-05-21 08:02:42 UTC (1369123362)
- <4>[ 5.255925] Warning: unable to open an initial console.
- <6>[ 5.256256] Freeing init memory: 300K
- <4>[ 5.260626] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
- <5>[ 5.266902] bq27541_get_psp status: Charging ret= 0x0101
- <5>[ 5.267560] bq27541_get_psp voltage_now= 3778000 uV
- <5>[ 5.268268] bq27541_get_psp current_now= -118000 uA
- <5>[ 5.268912] bq27541_get_capacity = 40% ret= 44
- <5>[ 5.269655] bq27541_get_psp charge_now = 1776000 uAh
- <5>[ 5.270303] bq27541_get_psp energy_now = 64740000 uWh
- <5>[ 5.271008] bq27541_get_psp temperature= 320 (0.1óXC)
- <6>[ 5.331952] keychord: using input dev gpio-keys for fevent
- <6>[ 5.553461] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
- <6>[ 5.576153] EXT4-fs (mmcblk0p4): recovery complete
- <6>[ 5.577792] EXT4-fs (mmcblk0p4): mounted filesystem with writeback data mode. Opts: discard,nomblk_io_submit,noauto_da_alloc,data=writeback,errors=panic
- <6>[ 6.341002] EXT4-fs (mmcblk0p9): recovery complete
- <6>[ 6.342585] EXT4-fs (mmcblk0p9): mounted filesystem with writeback data mode. Opts: discard,nomblk_io_submit,noauto_da_alloc,data=writeback,errors=panic
- <6>[ 6.360812] cpufreq_interactive_input_connect: connect to elan-touchscreen
- <3>[ 6.693558] init: cannot find '/system/bin/rild', disabling 'ril-daemon'
- <3>[ 6.697427] init: cannot find '/system/bin/rm_ts_server', disabling 'rm_ts_service'
- <6>[ 6.699074] tegra_uart tegra_uart.2: Setting clk_src clk_m
- <6>[ 6.699539] tegra_uart tegra_uart.2: Setting clk_src clk_m
- <6>[ 6.704462] tegra_uart tegra_uart.2: Setting clk_src clk_m
- <6>[ 6.704898] tegra_uart tegra_uart.2: Setting clk_src clk_m
- <6>[ 6.729872] tegra_uart tegra_uart.1: Setting clk_src clk_m
- <6>[ 6.730351] tegra_uart tegra_uart.1: Setting clk_src clk_m
- <6>[ 6.735238] tegra_uart tegra_uart.1: Setting clk_src clk_m
- <6>[ 6.735695] tegra_uart tegra_uart.1: Setting clk_src clk_m
- <4>[ 6.740217] [ektf3k]:[ELAN]into elan_iap_open
- <3>[ 6.742926] init: service 'console' requires console
- <3>[ 6.743229] android_usb: already disabled
- <6>[ 6.745540] adb_open
- <6>[ 6.745665] adb_open(adbd)
- <6>[ 6.745727] mtp_bind_config
- <6>[ 6.745818] adb_bind_config
- <4>[ 6.821131] [ektf3k]:Update touch firmware with the file path:/system/etc/firmware/touch_fw.ekt
- <6>[ 6.837301] EXT4-fs (mmcblk0p3): re-mounted. Opts: user_xattr,acl,barrier=1,data=ordered
- <4>[ 6.841535] [ektf3k]:The firmware was version 0xB011 and id:0x3021
- <4>[ 6.841608] [ektf3k]:No need to update firmware
- <6>[ 6.846497] TF : INFO 00000002 08:02:38.146 P-0005 T-000C TL OTF --------- SDrvCreate
- <6>[ 6.847397] TF : INFO 00000003 08:02:38.147 ------ ------ Kernel --------- Booted
- <6>[ 6.852684] android_work: did not send uevent (0 0 (null))
- <6>[ 6.854396] EXT4-fs (mmcblk0p3): re-mounted. Opts: user_xattr,acl,barrier=1,data=ordered
- <6>[ 6.992427] android_work: sent uevent USB_STATE=CONNECTED
- <6>[ 7.427385] android_work: sent uevent USB_STATE=DISCONNECTED
- <6>[ 7.567954] android_work: sent uevent USB_STATE=CONNECTED
- <6>[ 7.612856] set_config : usb set config wake lock ++
- <6>[ 7.612961] android_usb gadget: high speed config #1: android
- <6>[ 7.613306] android_work: sent uevent USB_STATE=CONFIGURED
- <6>[ 7.738047] cable_detection_work_handler(): vbus_active = 0 and is_active = 1
- <6>[ 7.738167] The USB cable is connected
- <6>[ 7.738235] elan-ktf3k 1-0010: Update power source to 1
- <6>[ 7.852494] nvavp nvavp: using SMMU at ff00000 to load AVP kernel
- <6>[ 7.856679] nvavp nvavp: read firmware from 'nvavp_os_0ff00000.bin' (15404 bytes)
- <6>[ 7.870438] nvavp nvavp: entry=00000094 control=00004a10 debug=00005210 size=15380
- <6>[ 7.870695] nvavp nvavp: AVP os at vaddr=f0e00000 paddr=ff00000 reset_addr=0ff00094
- <6>[ 7.874908] nvavp nvavp: read ucode firmware from 'nvavp_vid_ucode_alt.bin' (26832 bytes)
- <6>[ 7.917178] widget AIF3RX AIF3 Playback
- <6>[ 7.917251] widget AIF3TX AIF3 Capture
- <6>[ 7.925074] widget AIF3RX AIF3 Playback
- <6>[ 7.925142] widget AIF3TX AIF3 Capture
- <6>[ 11.109944] warning: `zygote' uses 32-bit capabilities (legacy support in use)
- <6>[ 11.217576] iio-buffer, current state requested again
- <6>[ 11.221381] iio-buffer, current state requested again
- <6>[ 11.223827] iio-buffer, current state requested again
- <6>[ 11.298221] iio-buffer, current state requested again
- <4>[ 29.568571] stop_machine_cpu_stop smp=0
- <4>[ 29.568579] stop_machine_cpu_stop smp=1
- <4>[ 29.568585] stop_machine_cpu_stop smp=2
- <4>[ 29.568591] stop_machine_cpu_stop smp=3
- <6>[ 29.569909] Hotplug: cpu1 is down - low load
- <4>[ 29.580393] stop_machine_cpu_stop smp=3
- <4>[ 29.580400] stop_machine_cpu_stop smp=0
- <4>[ 29.580406] stop_machine_cpu_stop smp=2
- <6>[ 29.581613] Hotplug: cpu2 is down - low load
- <4>[ 29.592132] stop_machine_cpu_stop smp=3
- <4>[ 29.592139] stop_machine_cpu_stop smp=0
- <6>[ 29.598037] Hotplug: cpu3 is down - low load
- <6>[ 29.820757] Hotplug: cpu1 is up - medium load
- <6>[ 29.828046] Switched to NOHz mode on CPU #1
- <4>[ 32.920067] stop_machine_cpu_stop smp=0
- <4>[ 32.920110] stop_machine_cpu_stop smp=1
- <6>[ 32.927262] Hotplug: cpu1 is down - low load
- <6>[ 33.048094] Switched to NOHz mode on CPU #1
- <6>[ 33.049051] Hotplug: cpu1 is up - medium load
- <6>[ 37.049719] Hotplug: cpu2 is up - medium load
- <6>[ 37.058044] Switched to NOHz mode on CPU #2
- <4>[ 39.763148] stop_machine_cpu_stop smp=0
- <4>[ 39.763161] stop_machine_cpu_stop smp=1
- <4>[ 39.763173] stop_machine_cpu_stop smp=2
- <6>[ 39.765062] Hotplug: cpu1 is down - low load
- <4>[ 39.780783] stop_machine_cpu_stop smp=0
- <4>[ 39.780803] stop_machine_cpu_stop smp=2
- <6>[ 39.786094] Hotplug: cpu2 is down - low load
- <6>[ 39.908551] Hotplug: cpu1 is up - medium load
- <6>[ 39.918032] Switched to NOHz mode on CPU #1
- <5>[ 40.803615] bq27541_get_capacity = 40% ret= 44
- <5>[ 40.804543] bq27541_get_psp voltage_now= 3777000 uV
- <5>[ 40.805389] bq27541_get_psp temperature= 320 (0.1óXC)
- <5>[ 40.806632] bq27541_get_psp status: Charging ret= 0x0101
- <6>[ 41.009898] nvavp nvavp: using SMMU at ff00000 to load AVP kernel
- <6>[ 41.010150] nvavp nvavp: AVP os at vaddr=f0e00000 paddr=ff00000 reset_addr=0ff00094
- <5>[ 41.918030] shutdown_enable_set bq27541_device->shutdown_disable = 0
- <6>[ 43.929136] Hotplug: cpu2 is up - medium load
- <6>[ 43.938015] Switched to NOHz mode on CPU #2
- <6>[ 47.929186] Hotplug: cpu3 is up - medium load
- <6>[ 47.938016] Switched to NOHz mode on CPU #3
- <4>[ 49.928534] stop_machine_cpu_stop smp=0
- <4>[ 49.928543] stop_machine_cpu_stop smp=1
- <4>[ 49.928549] stop_machine_cpu_stop smp=2
- <4>[ 49.928556] stop_machine_cpu_stop smp=3
- <6>[ 49.930006] Hotplug: cpu1 is down - low load
- <4>[ 49.930414] stop_machine_cpu_stop smp=0
- <4>[ 49.930420] stop_machine_cpu_stop smp=2
- <4>[ 49.930427] stop_machine_cpu_stop smp=3
- <6>[ 49.931413] Hotplug: cpu2 is down - low load
- <4>[ 49.935962] stop_machine_cpu_stop smp=0
- <4>[ 49.935969] stop_machine_cpu_stop smp=3
- <6>[ 49.938254] Hotplug: cpu3 is down - low load
- <6>[ 51.971318] Hotplug: cpu1 is up - high load
- <6>[ 51.978013] Switched to NOHz mode on CPU #1
- <6>[ 51.992299] Hotplug: cpu2 is up - high load
- <6>[ 51.993141] Hotplug: cpu3 is up - high load
- <6>[ 51.998012] Switched to NOHz mode on CPU #2
- <6>[ 51.998018] Switched to NOHz mode on CPU #3
- <4>[ 62.590691] stop_machine_cpu_stop smp=1
- <4>[ 62.590732] stop_machine_cpu_stop smp=2
- <4>[ 62.590770] stop_machine_cpu_stop smp=3
- <4>[ 62.590803] stop_machine_cpu_stop smp=0
- <6>[ 62.596785] Hotplug: cpu1 is down - low load
- <4>[ 62.600298] stop_machine_cpu_stop smp=0
- <4>[ 62.600339] stop_machine_cpu_stop smp=2
- <4>[ 62.600376] stop_machine_cpu_stop smp=3
- <6>[ 62.606527] Hotplug: cpu2 is down - low load
- <4>[ 62.614928] stop_machine_cpu_stop smp=0
- <4>[ 62.614973] stop_machine_cpu_stop smp=3
- <6>[ 62.620321] Hotplug: cpu3 is down - low load
- <5>[ 64.478726] bq27541_get_psp status: Charging ret= 0x0101
- <5>[ 64.479380] bq27541_get_psp voltage_now= 3776000 uV
- <5>[ 64.480066] bq27541_get_psp current_now= -137000 uA
- <5>[ 64.480709] bq27541_get_capacity = 40% ret= 44
- <5>[ 64.481392] bq27541_get_psp charge_now = 1772000 uAh
- <5>[ 64.482040] bq27541_get_psp energy_now = 64590000 uWh
- <5>[ 64.482688] bq27541_get_psp temperature= 320 (0.1óXC)
- <5>[ 64.484096] bq27541_get_capacity = 40% ret= 44
- <5>[ 64.485549] bq27541_get_psp voltage_now= 3776000 uV
- <5>[ 64.486455] bq27541_get_psp temperature= 320 (0.1óXC)
- <5>[ 64.487671] bq27541_get_psp status: Charging ret= 0x0101
- <6>[ 64.647813] Hotplug: cpu1 is up - high load
- <6>[ 64.648015] Switched to NOHz mode on CPU #1
- <6>[ 64.648840] Hotplug: cpu2 is up - high load
- <6>[ 64.649669] Hotplug: cpu3 is up - high load
- <6>[ 64.658021] Switched to NOHz mode on CPU #3
- <6>[ 64.658027] Switched to NOHz mode on CPU #2
- <4>[ 74.650875] stop_machine_cpu_stop smp=0
- <4>[ 74.650920] stop_machine_cpu_stop smp=1
- <4>[ 74.650958] stop_machine_cpu_stop smp=2
- <4>[ 74.650995] stop_machine_cpu_stop smp=3
- <6>[ 74.657686] Hotplug: cpu1 is down - low load
- <4>[ 74.660599] stop_machine_cpu_stop smp=0
- <4>[ 74.660641] stop_machine_cpu_stop smp=2
- <4>[ 74.660678] stop_machine_cpu_stop smp=3
- <6>[ 74.666095] Hotplug: cpu2 is down - low load
- <4>[ 74.678319] stop_machine_cpu_stop smp=0
- <4>[ 74.678326] stop_machine_cpu_stop smp=3
- <6>[ 74.679445] Hotplug: cpu3 is down - low load
- <6>[ 76.708854] Hotplug: cpu1 is up - high load
- <6>[ 76.718016] Switched to NOHz mode on CPU #1
- <6>[ 76.728916] Hotplug: cpu2 is up - high load
- <6>[ 76.729803] Hotplug: cpu3 is up - high load
- <6>[ 76.738013] Switched to NOHz mode on CPU #3
- <6>[ 76.738020] Switched to NOHz mode on CPU #2
- <4>[ 80.328886] stop_machine_cpu_stop smp=0
- <4>[ 80.328899] stop_machine_cpu_stop smp=1
- <4>[ 80.328910] stop_machine_cpu_stop smp=2
- <4>[ 80.328920] stop_machine_cpu_stop smp=3
- <6>[ 80.333448] Hotplug: cpu1 is down - low load
- <4>[ 80.335700] stop_machine_cpu_stop smp=0
- <4>[ 80.335740] stop_machine_cpu_stop smp=2
- <4>[ 80.335778] stop_machine_cpu_stop smp=3
- <6>[ 80.341813] Hotplug: cpu2 is down - low load
- <4>[ 80.353248] stop_machine_cpu_stop smp=0
- <4>[ 80.353256] stop_machine_cpu_stop smp=3
- <6>[ 80.360380] Hotplug: cpu3 is down - low load
- <6>[ 82.382949] Hotplug: cpu1 is up - high load
- <6>[ 82.388022] Switched to NOHz mode on CPU #1
- <6>[ 82.394103] Hotplug: cpu2 is up - high load
- <6>[ 82.398011] Switched to NOHz mode on CPU #2
- <6>[ 82.405433] Hotplug: cpu3 is up - high load
- <6>[ 82.408018] Switched to NOHz mode on CPU #3
- <4>[ 84.401461] stop_machine_cpu_stop smp=0
- <4>[ 84.401528] stop_machine_cpu_stop smp=1
- <4>[ 84.401570] stop_machine_cpu_stop smp=2
- <4>[ 84.401609] stop_machine_cpu_stop smp=3
- <6>[ 84.411681] Hotplug: cpu1 is down - low load
- <4>[ 84.415254] stop_machine_cpu_stop smp=0
- <4>[ 84.415297] stop_machine_cpu_stop smp=2
- <4>[ 84.415335] stop_machine_cpu_stop smp=3
- <6>[ 84.421063] Hotplug: cpu2 is down - low load
- <4>[ 84.421639] stop_machine_cpu_stop smp=0
- <4>[ 84.421646] stop_machine_cpu_stop smp=3
- <6>[ 84.428527] Hotplug: cpu3 is down - low load
- <6>[ 86.463318] Hotplug: cpu1 is up - high load
- <6>[ 86.468013] Switched to NOHz mode on CPU #1
- <6>[ 86.484333] Hotplug: cpu2 is up - high load
- <6>[ 86.485175] Hotplug: cpu3 is up - high load
- <6>[ 86.488011] Switched to NOHz mode on CPU #2
- <6>[ 86.488017] Switched to NOHz mode on CPU #3
- <4>[ 91.878782] stop_machine_cpu_stop smp=0
- <4>[ 91.878795] stop_machine_cpu_stop smp=1
- <4>[ 91.878806] stop_machine_cpu_stop smp=2
- <4>[ 91.878816] stop_machine_cpu_stop smp=3
- <6>[ 91.887624] Hotplug: cpu1 is down - low load
- <4>[ 91.901003] stop_machine_cpu_stop smp=0
- <4>[ 91.901010] stop_machine_cpu_stop smp=2
- <4>[ 91.901016] stop_machine_cpu_stop smp=3
- <6>[ 91.902136] Hotplug: cpu2 is down - low load
- <4>[ 91.918241] stop_machine_cpu_stop smp=0
- <4>[ 91.918248] stop_machine_cpu_stop smp=3
- <6>[ 91.923317] Hotplug: cpu3 is down - low load
- <6>[ 93.948848] Hotplug: cpu1 is up - high load
- <6>[ 93.958017] Switched to NOHz mode on CPU #1
- <6>[ 93.970175] Hotplug: cpu2 is up - high load
- <6>[ 93.978020] Switched to NOHz mode on CPU #2
- <6>[ 93.981286] Hotplug: cpu3 is up - high load
- <6>[ 93.988011] Switched to NOHz mode on CPU #3
- <4>[ 99.179787] stop_machine_cpu_stop smp=1
- <4>[ 99.179795] stop_machine_cpu_stop smp=2
- <4>[ 99.179802] stop_machine_cpu_stop smp=3
- <4>[ 99.179807] stop_machine_cpu_stop smp=0
- <6>[ 99.184614] Hotplug: cpu1 is down - low load
- <4>[ 99.187587] stop_machine_cpu_stop smp=0
- <4>[ 99.187629] stop_machine_cpu_stop smp=2
- <4>[ 99.187668] stop_machine_cpu_stop smp=3
- <6>[ 99.193522] Hotplug: cpu2 is down - low load
- <4>[ 99.218285] stop_machine_cpu_stop smp=3
- <4>[ 99.218292] stop_machine_cpu_stop smp=0
- <6>[ 99.219358] Hotplug: cpu3 is down - low load
- <6>[ 101.248630] Hotplug: cpu1 is up - high load
- <6>[ 101.249623] Hotplug: cpu2 is up - high load
- <6>[ 101.250417] Hotplug: cpu3 is up - high load
- <6>[ 101.258020] Switched to NOHz mode on CPU #2
- <6>[ 101.258027] Switched to NOHz mode on CPU #3
- <6>[ 101.258034] Switched to NOHz mode on CPU #1
- <4>[ 107.749298] stop_machine_cpu_stop smp=0
- <4>[ 107.749319] stop_machine_cpu_stop smp=1
- <4>[ 107.749336] stop_machine_cpu_stop smp=2
- <4>[ 107.749352] stop_machine_cpu_stop smp=3
- <6>[ 107.753694] Hotplug: cpu1 is down - low load
- <4>[ 107.761008] stop_machine_cpu_stop smp=0
- <4>[ 107.761050] stop_machine_cpu_stop smp=2
- <4>[ 107.761089] stop_machine_cpu_stop smp=3
- <6>[ 107.766617] Hotplug: cpu2 is down - low load
- <4>[ 107.770302] stop_machine_cpu_stop smp=0
- <4>[ 107.770310] stop_machine_cpu_stop smp=3
- <6>[ 107.776988] Hotplug: cpu3 is down - low load
- <6>[ 109.799242] Hotplug: cpu1 is up - high load
- <6>[ 109.808021] Switched to NOHz mode on CPU #1
- <6>[ 109.810723] Hotplug: cpu2 is up - high load
- <6>[ 109.818012] Switched to NOHz mode on CPU #2
- <6>[ 109.831791] Hotplug: cpu3 is up - high load
- <6>[ 109.838009] Switched to NOHz mode on CPU #3
- <5>[ 124.638642] bq27541_get_psp status: Charging ret= 0x0101
- <5>[ 124.639284] bq27541_get_psp voltage_now= 3768000 uV
- <5>[ 124.639960] bq27541_get_psp current_now= -301000 uA
- <5>[ 124.640599] bq27541_get_capacity = 40% ret= 44
- <5>[ 124.641273] bq27541_get_psp charge_now = 1768000 uAh
- <5>[ 124.641916] bq27541_get_psp energy_now = 64440000 uWh
- <5>[ 124.642593] bq27541_get_psp temperature= 320 (0.1óXC)
- <5>[ 124.643875] bq27541_get_capacity = 40% ret= 44
- <5>[ 124.644563] bq27541_get_psp voltage_now= 3768000 uV
- <5>[ 124.645287] bq27541_get_psp temperature= 320 (0.1óXC)
- <5>[ 124.645963] bq27541_get_psp status: Charging ret= 0x0101
- <4>[ 128.130065] stop_machine_cpu_stop smp=0
- <4>[ 128.130091] stop_machine_cpu_stop smp=1
- <4>[ 128.130110] stop_machine_cpu_stop smp=2
- <4>[ 128.130129] stop_machine_cpu_stop smp=3
- <6>[ 128.134838] Hotplug: cpu1 is down - low load
- <4>[ 128.137042] stop_machine_cpu_stop smp=0
- <4>[ 128.137084] stop_machine_cpu_stop smp=2
- <4>[ 128.137122] stop_machine_cpu_stop smp=3
- <6>[ 128.142519] Hotplug: cpu2 is down - low load
- <4>[ 128.158293] stop_machine_cpu_stop smp=3
- <4>[ 128.158300] stop_machine_cpu_stop smp=0
- <6>[ 128.159217] Hotplug: cpu3 is down - low load
- <6>[ 130.183537] Hotplug: cpu1 is up - high load
- <6>[ 130.188014] Switched to NOHz mode on CPU #1
- <6>[ 130.204562] Hotplug: cpu2 is up - high load
- <6>[ 130.205359] Hotplug: cpu3 is up - high load
- <6>[ 130.208012] Switched to NOHz mode on CPU #2
- <6>[ 130.208019] Switched to NOHz mode on CPU #3
- <4>[ 139.998822] stop_machine_cpu_stop smp=0
- <4>[ 139.998835] stop_machine_cpu_stop smp=1
- <4>[ 139.998846] stop_machine_cpu_stop smp=2
- <4>[ 139.998856] stop_machine_cpu_stop smp=3
- <6>[ 140.002660] Hotplug: cpu1 is down - low load
- <4>[ 140.005184] stop_machine_cpu_stop smp=0
- <4>[ 140.005224] stop_machine_cpu_stop smp=2
- <4>[ 140.005262] stop_machine_cpu_stop smp=3
- <6>[ 140.009823] Hotplug: cpu2 is down - low load
- <4>[ 140.020573] stop_machine_cpu_stop smp=0
- <4>[ 140.020581] stop_machine_cpu_stop smp=3
- <6>[ 140.029981] Hotplug: cpu3 is down - low load
- <6>[ 142.058815] Hotplug: cpu1 is up - high load
- <6>[ 142.059807] Hotplug: cpu2 is up - high load
- <6>[ 142.060582] Hotplug: cpu3 is up - high load
- <6>[ 142.068022] Switched to NOHz mode on CPU #1
- <6>[ 142.068029] Switched to NOHz mode on CPU #2
- <6>[ 142.068036] Switched to NOHz mode on CPU #3
- <4>[ 145.761607] stop_machine_cpu_stop smp=2
- <4>[ 145.761649] stop_machine_cpu_stop smp=3
- <4>[ 145.761680] stop_machine_cpu_stop smp=0
- <4>[ 145.761720] stop_machine_cpu_stop smp=1
- <6>[ 145.769025] Hotplug: cpu1 is down - low load
- <4>[ 145.771800] stop_machine_cpu_stop smp=0
- <4>[ 145.771841] stop_machine_cpu_stop smp=2
- <4>[ 145.771878] stop_machine_cpu_stop smp=3
- <6>[ 145.776384] Hotplug: cpu2 is down - low load
- <4>[ 145.789148] stop_machine_cpu_stop smp=3
- <4>[ 145.789154] stop_machine_cpu_stop smp=0
- <6>[ 145.790020] Hotplug: cpu3 is down - low load
- <6>[ 147.818845] Hotplug: cpu1 is up - high load
- <6>[ 147.828018] Switched to NOHz mode on CPU #1
- <6>[ 147.840157] Hotplug: cpu2 is up - high load
- <6>[ 147.841181] Hotplug: cpu3 is up - high load
- <6>[ 147.848021] Switched to NOHz mode on CPU #2
- <6>[ 147.848028] Switched to NOHz mode on CPU #3
- <4>[ 155.040892] stop_machine_cpu_stop smp=0
- <4>[ 155.040935] stop_machine_cpu_stop smp=1
- <4>[ 155.040974] stop_machine_cpu_stop smp=2
- <4>[ 155.041011] stop_machine_cpu_stop smp=3
- <6>[ 155.047134] Hotplug: cpu1 is down - low load
- <4>[ 155.050471] stop_machine_cpu_stop smp=0
- <4>[ 155.050513] stop_machine_cpu_stop smp=2
- <4>[ 155.050550] stop_machine_cpu_stop smp=3
- <6>[ 155.055185] Hotplug: cpu2 is down - low load
- <4>[ 155.066224] stop_machine_cpu_stop smp=3
- <4>[ 155.066231] stop_machine_cpu_stop smp=0
- <6>[ 155.068071] Hotplug: cpu3 is down - low load
- <6>[ 157.106552] Hotplug: cpu1 is up - high load
- <6>[ 157.108052] Switched to NOHz mode on CPU #1
- <6>[ 157.108061] Switched to NOHz mode on CPU #2
- <6>[ 157.108448] Hotplug: cpu2 is up - high load
- <6>[ 157.129528] Hotplug: cpu3 is up - high load
- <6>[ 157.138015] Switched to NOHz mode on CPU #3
- <5>[ 184.798679] bq27541_get_psp status: Charging ret= 0x0101
- <5>[ 184.799379] bq27541_get_psp voltage_now= 3766000 uV
- <5>[ 184.800020] bq27541_get_psp current_now= -313000 uA
- <5>[ 184.800658] bq27541_get_capacity = 40% ret= 44
- <5>[ 184.801336] bq27541_get_psp charge_now = 1763000 uAh
- <5>[ 184.801979] bq27541_get_psp energy_now = 64250000 uWh
- <5>[ 184.802659] bq27541_get_psp temperature= 320 (0.1óXC)
- <5>[ 184.803925] bq27541_get_capacity = 40% ret= 44
- <5>[ 184.804670] bq27541_get_psp voltage_now= 3766000 uV
- <5>[ 184.805352] bq27541_get_psp temperature= 320 (0.1óXC)
- <5>[ 184.806031] bq27541_get_psp status: Charging ret= 0x0101
- <4>[ 242.428620] stop_machine_cpu_stop smp=1
- <4>[ 242.428630] stop_machine_cpu_stop smp=2
- <4>[ 242.428638] stop_machine_cpu_stop smp=3
- <4>[ 242.428645] stop_machine_cpu_stop smp=0
- <6>[ 242.430297] Hotplug: cpu1 is down - low load
- <4>[ 242.430870] stop_machine_cpu_stop smp=0
- <4>[ 242.430878] stop_machine_cpu_stop smp=2
- <4>[ 242.430886] stop_machine_cpu_stop smp=3
- <6>[ 242.434020] Hotplug: cpu2 is down - low load
- <4>[ 242.436006] stop_machine_cpu_stop smp=0
- <4>[ 242.436045] stop_machine_cpu_stop smp=3
- <6>[ 242.448040] Hotplug: cpu3 is down - low load
- <6>[ 244.478849] Hotplug: cpu1 is up - high load
- <6>[ 244.488017] Switched to NOHz mode on CPU #1
- <6>[ 244.499949] Hotplug: cpu2 is up - high load
- <6>[ 244.508019] Switched to NOHz mode on CPU #2
- <6>[ 244.511046] Hotplug: cpu3 is up - high load
- <6>[ 244.518009] Switched to NOHz mode on CPU #3
- <5>[ 244.958653] bq27541_get_psp status: Charging ret= 0x0101
- <5>[ 244.959352] bq27541_get_psp voltage_now= 3774000 uV
- <5>[ 244.959988] bq27541_get_psp current_now= -138000 uA
- <5>[ 244.960714] bq27541_get_capacity = 40% ret= 44
- <5>[ 244.961361] bq27541_get_psp charge_now = 1758000 uAh
- <5>[ 244.962008] bq27541_get_psp energy_now = 64060000 uWh
- <5>[ 244.962682] bq27541_get_psp temperature= 320 (0.1óXC)
- <5>[ 244.963910] bq27541_get_capacity = 40% ret= 44
- <5>[ 244.964637] bq27541_get_psp voltage_now= 3774000 uV
- <5>[ 244.965316] bq27541_get_psp temperature= 320 (0.1óXC)
- <5>[ 244.966041] bq27541_get_psp status: Charging ret= 0x0101
- <4>[ 247.610722] stop_machine_cpu_stop smp=0
- <4>[ 247.610763] stop_machine_cpu_stop smp=1
- <4>[ 247.610802] stop_machine_cpu_stop smp=2
- <4>[ 247.610839] stop_machine_cpu_stop smp=3
- <6>[ 247.616748] Hotplug: cpu1 is down - low load
- <4>[ 247.619709] stop_machine_cpu_stop smp=0
- <4>[ 247.619750] stop_machine_cpu_stop smp=2
- <4>[ 247.619787] stop_machine_cpu_stop smp=3
- <6>[ 247.625283] Hotplug: cpu2 is down - low load
- <4>[ 247.630335] stop_machine_cpu_stop smp=0
- <4>[ 247.630342] stop_machine_cpu_stop smp=3
- <6>[ 247.631182] Hotplug: cpu3 is down - low load
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement