-----edison.log---

##########################################################################################################˙˙

******************************
PSH KERNEL VERSION: b0182b2b
		WR: 20104000
******************************

SCU IPC: 0x800000d0  0xfffce92c

PSH miaHOB version: TNG.B0.VVBD.0000000c

microkernel built 11:24:08 Feb  5 2015

******* PSH loader *******
PCM page cache size = 192 KB
Cache Constraint = 0 Pages
Arming IPC driver ..
Adding page store pool ..
PagestoreAddr(IMR Start Address) = 0x04899000
pageStoreSize(IMR Size)          = 0x00080000

*** Ready to receive application ***
˙˙

******************************
PSH KERNEL VERSION: b0182b2b
		WR: 20104000
******************************

SCU IPC: 0x800000d0  0xfffce92c

PSH miaHOB version: TNG.B0.VVBD.0000000c

microkernel built 11:24:08 Feb  5 2015

******* PSH loader *******
PCM page cache size = 192 KB
Cache Constraint = 0 Pages
Arming IPC driver ..
Adding page store pool ..
PagestoreAddr(IMR Start Address) = 0x04899000
pageStoreSize(IMR Size)          = 0x00080000

*** Ready to receive application ***


U-Boot 2014.04 (Jun 06 2016 - 14:40:07)

       Watchdog enabled
DRAM:  980.6 MiB
MMC:   tangier_sdhci: 0
In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot:  1  0
Target:blank
Partitioning already done...
Flashing already done...
GADGET DRIVER: usb_dnl_dfu
reading vmlinuz
5461344 bytes read in 135 ms (38.6 MiB/s)
Valid Boot Flag
Setup Size = 0x00003c00
Magic signature found
Using boot protocol version 2.0c
Linux kernel version 3.10.98-poky-edison+ (neck@flax) #1 SMP PREEMPT Mon Jun 6 14:32:08 PDT 2016
Building boot_params at 0x00090000
Loading bzImage at address 00100000 (5445984 bytes)
Magic signature found
Kernel command line: "rootwait root=PARTUUID=012b3303-34ac-284d-99b4-34e03a2335f4 rootfstype=ext4 console=ttyMFD2 earlyprintk=ttyMFD2,keep loglevel=4 g_multi.ethernet_config=cdc systemd.unit=multi-user.target hardware_id=00 g_multi.iSerialNumber=f318a5f442ee183c85546e1c2c94a071 g_multi.dev_addr=02:00:86:94:a0:71 platform_mrfld_audio.audio_codec=dummy"

Starting kernel ...

[    0.735224] pca953x 1-0020: failed reading register
[    1.637616] snd_soc_sst_platform: Enter:sst_soc_probe
[    2.121245] pmic_ccsm pmic_ccsm: Error reading battery profile from battid frmwrk
[    2.130575] pmic_ccsm pmic_ccsm: Battery Over heat exception
[    2.130654] pmic_ccsm pmic_ccsm: Battery0 temperature inside boundary

Welcome to Linux!

[    2.779437] systemd[1]: [/lib/systemd/system/wyliodrin-server.service:3] Failed to add dependency on redis, ignoring: Invalid argument
[    2.782552] systemd[1]: [/lib/systemd/system/wyliodrin-hypervisor.service:3] Failed to add dependency on redis, ignoring: Invalid argument
ţA˙

******************************
PSH KERNEL VERSION: b0182b2b
		WR: 20104000
******************************

SCU IPC: 0x800000d0  0xfffce92c

PSH miaHOB version: TNG.B0.VVBD.0000000c

microkernel built 11:24:08 Feb  5 2015

******* PSH loader *******
PCM page cache size = 192 KB
Cache Constraint = 0 Pages
Arming IPC driver ..
Adding page store pool ..
PagestoreAddr(IMR Start Address) = 0x04899000
pageStoreSize(IMR Size)          = 0x00080000

*** Ready to receive application ***


U-Boot 2014.04 (Jun 06 2016 - 14:40:07)

       Watchdog enabled
DRAM:  980.6 MiB
MMC:   tangier_sdhci: 0
In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot:  1  0
Target:blank
Partitioning already done...
Flashing already done...
GADGET DRIVER: usb_dnl_dfu
reading vmlinuz
5461344 bytes read in 135 ms (38.6 MiB/s)
Valid Boot Flag
Setup Size = 0x00003c00
Magic signature found
Using boot protocol version 2.0c
Linux kernel version 3.10.98-poky-edison+ (neck@flax) #1 SMP PREEMPT Mon Jun 6 14:32:08 PDT 2016
Building boot_params at 0x00090000
Loading bzImage at address 00100000 (5445984 bytes)
Magic signature found
Kernel command line: "rootwait root=PARTUUID=012b3303-34ac-284d-99b4-34e03a2335f4 rootfstype=ext4 console=ttyMFD2 earlyprintk=ttyMFD2,keep loglevel=4 g_multi.ethernet_config=cdc systemd.unit=multi-user.target hardware_id=00 g_multi.iSerialNumber=f318a5f442ee183c85546e1c2c94a071 g_multi.dev_addr=02:00:86:94:a0:71 platform_mrfld_audio.audio_codec=dummy"

Starting kernel ...

[    0.735359] pca953x 1-0020: failed reading register
[    1.646995] snd_soc_sst_platform: Enter:sst_soc_probe
[    2.141393] pmic_ccsm pmic_ccsm: Error reading battery profile from battid frmwrk
[    2.150248] pmic_ccsm pmic_ccsm: Battery Over heat exception
[    2.150328] pmic_ccsm pmic_ccsm: Battery0 temperature inside boundary

Welcome to Linux!

[    2.731189] systemd[1]: [/lib/systemd/system/wyliodrin-server.service:3] Failed to add dependency on redis, ignoring: Invalid argument
[    2.734345] systemd[1]: [/lib/systemd/system/wyliodrin-hypervisor.service:3] Failed to add dependency on redis, ignoring: Invalid argument
         Expecting device dev-ttyMFD2.device...
[  OK  ] Reached target Remote File Systems.
         Expecting device dev-disk-by\x2dpartlabel-factory.device...
         Expecting device dev-disk-by\x2dpartlabel-rootfs.device...
         Expecting device dev-disk-by\x2dpartlabel-update.device...
         Expecting device dev-disk-by\x2dpartlabel-home.device...
         Expecting device sys-subsystem-net-devices-usb0.device...
[  OK  ] Reached target Paths.
[  OK  ] Reached target Swap.
[  OK  ] Created slice Root Slice.
[  OK  ] Created slice User and Session Slice.
[  OK  ] Listening on Delayed Shutdown Socket.
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[  OK  ] Listening on udev Control Socket.
[  OK  ] Listening on udev Kernel Socket.
[  OK  ] Listening on Journal Socket.
[  OK  ] Created slice System Slice.
         Mounting Temporary Directory...
[  OK  ] Created slice system-getty.slice.
[  OK  ] Created slice system-serial\x2dgetty.slice.
         Starting Create list of required static device nodes...rrent kernel...
         Starting udev Coldplug all Devices...
         Starting Load Kernel Modules...
         Mounting Debug File System...
         Mounting POSIX Message Queue File System...
         Starting Apply Kernel Variables...
         Starting Journal Service...
[  OK  ] Started Journal Service.
[  OK  ] Reached target Slices.
         Starting Remount Root and Kernel File Systems...
[  OK  ] Set up automount boot.automount.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Mounted Debug File System.
[  OK  ] Mounted Temporary Directory.
[  OK  ] Started Create list of required static device nodes ...current kernel.
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Started Remount Root and Kernel File Systems.
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Started Load Kernel Modules.
         Mounting Configuration File System...
         Mounting FUSE Control File System...
         Starting Load/Save Random Seed...
         Starting Create Static Device Nodes in /dev...
[  OK  ] Mounted FUSE Control File System.
[  OK  ] Mounted Configuration File System.
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Started Create Static Device Nodes in /dev.
         Starting udev Kernel Device Manager...
[  OK  ] Reached target Local File Systems (Pre).
         Mounting /var/volatile...
[  OK  ] Mounted /var/volatile.
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Reached target Local File Systems.
         Starting Trigger Flushing of Journal to Persistent Storage...
         Starting Create Volatile Files and Directories...
[  OK  ] Started Create Volatile Files and Directories.
[  OK  ] Started Trigger Flushing of Journal to Persistent Storage.
[  OK  ] Found device /dev/ttyMFD2.
[  OK  ] Created slice system-systemd\x2drfkill.slice.
         Starting Load/Save RF Kill Switch Status of rfkill0...
         Starting Opkg first boot configure...
         Starting Network Time Synchronization...
         Starting Update UTMP about System Boot/Shutdown...
[  OK  ] Started Network Time Synchronization.
[  OK  ] Started Load/Save RF Kill Switch Status of rfkill0.
[  OK  ] Found device /dev/disk/by-partlabel/factory.
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[  OK  ] Found device /dev/disk/by-partlabel/home.
[  OK  ] Found device /dev/disk/by-partlabel/rootfs.
[  OK  ] Found device /dev/disk/by-partlabel/update.
[  OK  ] Started Opkg first boot configure.
[  OK  ] Found device /sys/subsystem/net/devices/usb0.
         Starting Load/Save RF Kill Switch Status of rfkill2...
         Starting Load/Save RF Kill Switch Status of rfkill1...
         Mounting Mount for factory...
[  OK  ] Mounted Mount for factory.
[  OK  ] Started Load/Save RF Kill Switch Status of rfkill2.
[  OK  ] Started Load/Save RF Kill Switch Status of rfkill1.
[  OK  ] Reached target System Initialization.
[  OK  ] Listening on RPCbind Server Activation Socket.
[  OK  ] Reached target Timers.
         Starting Restore Sound Card State...
         Starting Console System Startup Logging...
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Listening on sshd.socket.
[  OK  ] Started Console System Startup Logging.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
         Starting Edison PWR button handler...
[  OK  ] Started Edison PWR button handler.
         Starting Edison sketch check service...
[  OK  ] Started Edison sketch check service.
         Starting Daemon to load edison mcu app binary...
[  OK  ] Started Daemon to load edison mcu app binary.
Application available at (physical) address 0x04819000
	VRL mapped to 0xff217000
	App size = 11508 bytes

	App Authentication feature is disabled!
	Resetting IPC

*** Ready to receive applY€a         Startintion ***
         Starting OpenSSH Key Generation...
         Starting Start or stop WiFI AP Mode in Edison...
[  OK  ] Started Start or stop WiFI AP Mode in Edison.
         Starting Wyliodrin hypervisor...
         Starting Bluetooth rf kill event daemon...
[  OK  ] Started Bluetooth rf kill event daemon.
         Starting Daemon to handle arduino sketches...
[  OK  ] Started Daemon to handle arduino sketches.
         Starting Daemon to reset sketches...
[  OK  ] Started Daemon to reset sketches.
         Starting Wyliodrin server...
         Starting Login Service...
         Starting Watchdog sample daemon...
[  OK  ] Started Watchdog sample daemon.
         Starting Crashlog service...
[  OK  ] Started Crashlog service.
         Starting Permit User Sessions...
         Starting Post install service...
         Starting Generate unique machine-id...
         Starting Cleanjournal service...
[  OK  ] Started Cleanjournal service.
         Starting D-Bus System Message Bus...
[  OK  ] Started D-Bus System Message Bus.
[   10.927626] sh[233]: Starting Post Install (try: 0)
[  OK  ] Started Telephony service.
         Starting Network Service...
[  OK  ] Started Restore Sound Card State.
[  OK  ] Started Permit User Sessions.
[  OK  ] Started Network Service.
[   11.589507] systemd-machine-id-setup[258]: Initializing machine ID from random generator.
[   11.912269] systemctl[260]: rm '/etc/systemd/system/basic.target.wants/edison-machine-id.service'
[  OK  ] Started Generate unique machine-id.
[  OK  ] Started Login Service.
         Starting Bluetooth service...
         Starting Edison Arduino board LED Blinker...
[  OK  ] Started Edison Arduino board LED Blinker.
         Starting PulseAudio Sound System...
         Starting Network Name Resolution...
[  OK  ] Reached target Network.
[   13.314479] sh[233]: Backup home/root contents of rootfs : Success
[   13.416355] sh[233]: mke2fs 1.42.9 (28-Dec-2013)
         Starting Mosquitto - lightweight server implementati...SN protocols...
         Starting Zero-configuration networking...
         Starting Getty on tty1...
[  OK  ] Started Getty on tty1.
[  OK  ] Started Network Name Resolution.
[  OK  ] Started Mosquitto - lightweight server implementatio...T-SN protocols.
[  OK  ] Started Bluetooth service.
[  OK  ] Started Zero-configuration networking.
         Starting Hostname Service...
         Starting The Edison status and configuration service...
[   14.572469] EXT4-fs error (device mmcblk0p8): ext4_lookup:1437: inode #17281: comm python: deleted inode referenced: 7126
[   14.612171] EXT4-fs error (device mmcblk0p8): ext4_lookup:1437: inode #17281: comm python: deleted inode referenced: 7126
[   14.613198] EXT4-fs error (device mmcblk0p8): ext4_lookup:1437: inode #17281: comm python: deleted inode referenced: 7126
[   14.517422] sh[233]: Discarding device blocks:   4096/348155             done
[  OK  ] Started The Edison status and configuration service.
[  OK  ] Started Hostname Service.
[   14.636251] sh[233]: Filesystem label=
[   14.710571] sh[233]: OS type: Linux
[   14.769085] sh[233]: Block size=4096 (log=2)
[   14.814874] sh[233]: Fragment size=4096 (log=2)
[   14.817011] sh[233]: Stride=0 blocks, Stripe width=0 blocks
[   14.822312] sh[233]: 87120 inodes, 348155 blocks
[   14.824357] sh[233]: 0 blocks (0.00%) reserved for the super user
[   14.826396] sh[233]: First data block=0
[   14.828440] sh[233]: Maximum filesystem blocks=356515840
[  OK  ] Created slice user-0.slice.
[   14.840716] sh[233]: 11 block groups
[   14.916468] sh[233]: 32768 blocks per group, 32768 fragments per group
[   14.921608] sh[233]: 7920 inodes per group
[   14.925551]          Starting User Manager for UID 0...
sh[233]: Superblock backups stored on blocks:
[   14.992340] sh[233]: 32768, 98304, 163840, 229376, 294912
[   15.034163] sh[233]: Allocating group tables:  0/11     done
[   15.053270] sh[233]: Writing inode tables:  0/11     done
[  OK  ] Started Wyliodrin hypervisor.
[  OK  ] Started Wyliodrin server.
[  OK  ] Started User Manager for UID 0.
[   15.920528] EXT4-fs error (device mmcblk0p8): ext4_lookup:1437: inode #7817: comm wyliodrind: deleted inode referenced: 46208
[   15.922279] EXT4-fs error (device mmcblk0p8): ext4_lookup:1437: inode #7817: comm wyliodrind: deleted inode referenced: 46208
[   15.925917] EXT4-fs error (device mmcblk0p8): ext4_lookup:1437: inode #7817: comm wyliodrind: deleted inode referenced: 46209
[   15.926799] EXT4-fs error (device mmcblk0p8): ext4_lookup:1437: inode #7817: comm wyliodrind: deleted inode referenced: 46209
[   15.966920] sh[233]: Creating journal (8192 blocks): done
[   18.812436] sh[233]: Writing superblocks and filesystem accounting information:  0/11     done
[   18.856136] sh[233]: Formatting home partition : Success
[   18.973716] sh[233]: Mount /home partition : Success
[   18.999922] sh[233]: Restore home/root contents on new /home partition : Success
[   19.034627] sh[233]: Welcome to fdisk (util-linux 2.24.2).
[   19.103661] sh[233]: Changes will remain in memory only, until you decide to write them.
[   19.240269] sh[233]: Be careful before using the write command.
[   19.349191] sh[233]: Command (m for help):
[   19.425801] sh[233]: Partition type:
[   19.522321] sh[233]: p   primary (1 primary, 0 extended, 3 free)
[   19.572258] sh[233]: e   extended
[   19.672322] sh[233]: Select (default p): Partition number (2-4, default 2): Value out of range.
[   19.812280] sh[233]: Partition number (2-4, default 2):
[   19.922299] sh[233]: No free sectors available.
[   20.032357] sh[233]: Command (m for help):
[   20.072255] sh[233]: Command (m for help):
[   20.114257] sh[233]: Selected partition 1
[   20.154104] sh[233]: Hex code (type L to list all codes): Changed type of partition 'W95 FAT32' to 'W95 FAT32'.
[   20.242305] sh[233]: Command (m for help): Disk /dev/disk/by-partlabel/update: 768 MiB, 805306368 bytes, 1572864 sectors
[   20.316382] sh[233]: Units: sectors of 1 * 512 = 512 bytes
[   20.372446] sh[233]: Sector size (logical/physical): 512 bytes / 512 bytes
[   20.422315] sh[233]: I/O size (minimum/optimal): 512 bytes / 512 bytes
[   20.495078] sh[233]: Disklabel type: dos
[   20.550244] sh[233]: Disk identifier: 0xc8af4eba
[   20.596823] sh[233]: Device                         Boot Start       End Blocks  Id System
[   20.642444] sh[233]: /dev/disk/by-partlabel/update1         16   1572863 786424   b W95 FAT32
[   20.710834] sh[233]: Command (m for help): Re-reading the partition table failed.: Invalid argument
[   20.762179] sh[233]: The partition table has been altered.
[   20.771639] sh[233]: Calling ioctl() to re-read partition table.
[   20.774214] sh[233]: The kernel still uses the old table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8).
[   20.777172] sh[233]: Formatting update partition Step 1 : Success
[   20.813287] sh[233]: Formatting update partition Step 2 : Failed ret(1)
[   20.850617] sh[233]: No journal files were found.
[   20.896771] sh[233]: mkfs.vfat: /dev/loop0 contains a mounted file system.
[   20.946630] sh[233]: mkfs.vfat 2.11 (12 Mar 2005)
[   20.982274] sh[233]: Formatting update partition Step 3 : Failed ret(1)
[   21.027499] sh[233]: No journal files were found.
[   21.423859] sh[233]: Formatting update partition Step 4 final : Success
[   22.942199] sh[233]: Update file system table /etc/fstab : Success
[   24.515728] sh[233]: Generating Wifi Access Point SSID and passphrase : Success
[   24.604509] sh[233]: Post install success
[   24.818267] sh[233]: No journal files were found.
[   27.024762] systemctl[417]: rm '/etc/systemd/system/basic.target.wants/post-install.service'
[  OK  ] Started Post install service.
         Stopping User Manager for UID 0...
         Starting Serial Getty on ttyMFD2...
[  OK  ] Started Serial Getty on ttyMFD2.
[  OK  ] Reached target Login Prompts.
         Starting Intel_XDK_Daemon...
[  OK  ] Started Intel_XDK_Daemon.
         Starting Increases rootfs image size to fit partition...
[   28.532082] resize2fs[434]: resize2fs 1.42.9 (28-Dec-2013)
[   28.587377] resize2fs[434]: /sbin/resize2fs: Permission denied to resize filesystem
[   28.622230] resize2fs[434]: Filesystem at /dev/disk/by-partlabel/rootfs is mounted on /; on-line resizing required
[   28.672053] resize2fs[434]: old_desc_blocks = 1, new_desc_blocks = 1
[  OK  ] Started OpenSSH Key Generation.
[  OK  ] Stopped User Manager for UID 0.
[FAILED] Failed to start Increases rootfs image size to fit partition.
See 'systemctl status resize-rootfs.service' for details.
[  OK  ] Removed slice user-0.slice.
[  OK  ] Reached target Multi-User System.
         Starting Redis Server...
[  OK  ] Started Redis Server.

Poky (Yocto Project Reference Distro) 1.7.3 edison ttyMFD2

edison login: rootrooto     root
Password:
Poky (Yocto Project Reference Distro) 1.7.3 edison ttyMFD2

edison login:
Poky (Yocto Project Reference Distro) 1.7.3 edison ttyMFD2

edison login: root
root@edison:/# con
configure_edison    connmand            continue
connmanctl          console-kit-daemon
root@edison:/# con
configure_edison    connmand            continue
connmanctl          console-kit-daemon
root@edison:/# configure_edison --setup

Configure Edison: Device Password

Enter a new password (leave empty to abort)
This will be used to connect to the access point and login to the device.
Password: 	**********
Please enter the password again: 	**********
First-time root password setup complete. Enabling SSH on WiFi interface.
The device password has been changed.

root@edison:/# exit






-----edison.log.2
******* PSH loader *******
PCM page cache size = 192 KB
Cache Constraint = 0 Pages
Arming IPC driver ..
Adding page store pool ..
PagestoreAddr(IMR Start Address) = 0x04899000
pageStoreSize(IMR Size)          = 0x00080000

*** Ready to receive application ***


U-Boot 2014.04 (Jun 06 2016 - 14:40:07)

       Watchdog enabled
DRAM:  980.6 MiB


******************************
PSH KERNEL VERSION: b0182b2b
                WR: 20104000
******************************

SCU IPC: 0x800000d0  0xfffce92c

PSH miaHOB version: TNG.B0.VVBD.0000000c

microkernel built 11:24:08 Feb  5 2015

******* PSH loader *******
PCM page cache size = 192 KB
Cache Constraint = 0 Pages
Arming IPC driver ..
Adding page store pool ..
PagestoreAddr(IMR Start Address) = 0x04899000
pageStoreSize(IMR Size)          = 0x00080000

*** Ready to receive application ***


U-Boot 2014.04 (Jun 06 2016 - 14:40:07)

       Watchdog enabled
DRAM:  980.6 MiB
MMC:   tangier_sdhci: 0
In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot:  0
Target:blank
Partitioning already done...
Flashing already done...
GADGET DRIVER: usb_dnl_dfu
reading vmlinuz
5461344 bytes read in 135 ms (38.6 MiB/s)
Valid Boot Flag
Setup Size = 0x00003c00
Magic signature found
Using boot protocol version 2.0c
Linux kernel version 3.10.98-poky-edison+ (neck@flax) #1 SMP PREEMPT Mon Jun 6 14:32:08 PDT 2016
Building boot_params at 0x00090000
Loading bzImage at address 00100000 (5445984 bytes)
Magic signature found
Kernel command line: "rootwait root=PARTUUID=012b3303-34ac-284d-99b4-34e03a2335f4 rootfstype=ext4 console=ttyMFD2 earlyprintk=ttyMFD2,keep loglevel=4 g_multi.ethernet_config=rndis systemd.unit=multi-user.ta"

Starting kernel ...

[    1.632950] snd_soc_sst_platform: Enter:sst_soc_probe
[    2.117019] pmic_ccsm pmic_ccsm: Error reading battery profile from battid frmwrk
[    2.126418] pmic_ccsm pmic_ccsm: Battery Over heat exception
[    2.126496] pmic_ccsm pmic_ccsm: Battery0 temperature inside boundary
[    2.136638] pmic_ccsm pmic_ccsm: Battery temperature zone changed
[    2.144643] pmic_ccsm pmic_ccsm: Battery0 temperature inside boundary

Welcome to Linux!

[    2.795158] systemd[1]: [/lib/systemd/system/wyliodrin-server.service:3] Failed to add dependency on redis, ignoring: Invalid argument
[    2.798354] systemd[1]: [/lib/systemd/system/wyliodrin-hypervisor.service:3] Failed to add dependency on redis, ignoring: Invalid argument
         Expecting device dev-ttyMFD2.device...
[  OK  ] Reached target Remote File Systems.
         Expecting device sys-subsystem-net-devices-wlan0.device...
         Expecting device dev-disk-by\x2dpartlabel-factory.device...
[  OK  ] Reached target Paths.
[  OK  ] Reached target Swap.
[  OK  ] Set up automount boot.automount.
[  OK  ] Created slice Root Slice.
[  OK  ] Created slice User and Session Slice.
[  OK  ] Listening on Delayed Shutdown Socket.
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[  OK  ] Listening on udev Control Socket.
[  OK  ] Listening on udev Kernel Socket.
[  OK  ] Listening on Journal Socket.
[  OK  ] Created slice System Slice.
         Mounting Temporary Directory...
[  OK  ] Created slice system-serial\x2dgetty.slice.
[  OK  ] Created slice system-getty.slice.
         Starting Create list of required static device nodes...rrent kernel...
         Starting udev Coldplug all Devices...
         Starting Load Kernel Modules...
         Mounting Debug File System...
         Mounting POSIX Message Queue File System...