Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ubuntu@ubuntu:~$ sudo smartctl -a /dev/sdc
- smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-32-generic] (local build)
- Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Maxtor DiamondMax Plus 9
- Device Model: Maxtor 6Y120M0
- Serial Number: Y3M6J7BE
- Firmware Version: YAR51EW0
- User Capacity: 122,942,324,736 bytes [122 GB]
- Sector Size: 512 bytes logical/physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA/ATAPI-7 T13/1532D revision 0
- Local Time is: Sat Oct 4 23:39:24 2014 UTC
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 242) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- No General Purpose Logging support.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 54) minutes.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 3 Spin_Up_Time 0x0027 204 199 063 Pre-fail Always - 18570
- 4 Start_Stop_Count 0x0032 251 251 000 Old_age Always - 5592
- 5 Reallocated_Sector_Ct 0x0033 251 251 063 Pre-fail Always - 26
- 6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0
- 7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 0
- 8 Seek_Time_Performance 0x0027 253 238 187 Pre-fail Always - 60652
- 9 Power_On_Minutes 0x0032 098 098 000 Old_age Always - 287h+34m
- 10 Spin_Retry_Count 0x002b 253 252 157 Pre-fail Always - 0
- 11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 248 248 000 Old_age Always - 2274
- 192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 0
- 193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0
- 194 Temperature_Celsius 0x0032 253 253 000 Old_age Always - 29
- 195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always - 2228
- 196 Reallocated_Event_Count 0x0008 230 230 000 Old_age Offline - 23
- 197 Current_Pending_Sector 0x0008 251 251 000 Old_age Offline - 25
- 198 Offline_Uncorrectable 0x0008 217 217 000 Old_age Offline - 36
- 199 UDMA_CRC_Error_Count 0x0008 199 198 000 Old_age Offline - 1
- 200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always - 0
- 201 Soft_Read_Error_Rate 0x000a 253 248 000 Old_age Always - 7
- 202 Data_Address_Mark_Errs 0x000a 253 235 000 Old_age Always - 1
- 203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always - 191
- 204 Soft_ECC_Correction 0x000a 253 252 000 Old_age Always - 0
- 205 Thermal_Asperity_Rate 0x000a 253 252 000 Old_age Always - 0
- 207 Spin_High_Current 0x002a 253 252 000 Old_age Always - 0
- 208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 0
- 209 Offline_Seek_Performnce 0x0024 195 186 000 Old_age Offline - 0
- 99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
- 100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
- 101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0
- SMART Error Log Version: 1
- Warning: ATA error count 609 inconsistent with error log pointer 5
- ATA Error Count: 609 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 609 occurred at disk power-on lifetime: 50445 hours (2101 days + 21 hours)
- When the command that caused the error occurred, the device was in an unknown state.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 06 20 09 00 e1 Error: UNC 6 sectors at LBA = 0x01000920 = 16779552
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 20 09 00 e1 00 00:41:09.072 READ DMA
- ca 00 08 00 08 00 e0 00 00:41:09.056 WRITE DMA
- f8 00 00 00 00 00 e0 00 00:41:09.056 READ NATIVE MAX ADDRESS [OBS-ACS-3]
- ec 00 00 00 00 00 a0 00 00:41:09.056 IDENTIFY DEVICE
- ef 03 46 00 00 00 a0 00 00:41:09.056 SET FEATURES [Set transfer mode]
- Error 608 occurred at disk power-on lifetime: 50445 hours (2101 days + 21 hours)
- When the command that caused the error occurred, the device was in an unknown state.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 06 20 09 00 e1 Error: UNC 6 sectors at LBA = 0x01000920 = 16779552
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 20 09 00 e1 00 00:41:08.032 READ DMA
- c8 00 20 38 09 00 e1 00 00:41:08.032 READ DMA
- c8 00 08 30 09 00 e1 00 00:41:08.032 READ DMA
- c8 00 08 28 09 00 e1 00 00:41:08.032 READ DMA
- c8 00 08 00 09 01 e1 00 00:41:08.016 READ DMA
- Error 607 occurred at disk power-on lifetime: 50445 hours (2101 days + 21 hours)
- When the command that caused the error occurred, the device was in an unknown state.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 36 18 09 00 e1 Error: UNC 54 sectors at LBA = 0x01000918 = 16779544
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 40 18 09 00 e1 00 00:41:06.560 READ DMA
- c8 00 08 10 09 00 e1 00 00:41:06.560 READ DMA
- c8 00 08 08 09 00 e1 00 00:41:06.560 READ DMA
- c8 00 08 00 09 c0 e0 00 00:41:06.560 READ DMA
- c8 00 88 18 09 c0 e0 00 00:41:06.544 READ DMA
- Error 606 occurred at disk power-on lifetime: 50444 hours (2101 days + 20 hours)
- When the command that caused the error occurred, the device was in an unknown state.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 06 20 09 00 e1 Error: UNC 6 sectors at LBA = 0x01000920 = 16779552
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 20 09 00 e1 00 00:32:09.616 READ DMA
- ca 00 08 00 08 00 e0 00 00:32:09.584 WRITE DMA
- c8 00 30 88 a0 05 e8 00 00:32:09.584 READ DMA
- c8 00 08 b0 e2 05 e8 00 00:32:09.584 READ DMA
- c8 00 08 20 e3 05 e8 00 00:32:09.584 READ DMA
- Error 605 occurred at disk power-on lifetime: 50444 hours (2101 days + 20 hours)
- When the command that caused the error occurred, the device was in an unknown state.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 06 20 09 00 e1 Error: UNC 6 sectors at LBA = 0x01000920 = 16779552
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 20 09 00 e1 00 00:32:08.496 READ DMA
- f8 00 00 00 00 00 e0 00 00:32:08.480 READ NATIVE MAX ADDRESS [OBS-ACS-3]
- ec 00 00 00 00 00 a0 00 00:32:08.480 IDENTIFY DEVICE
- ef 03 46 00 00 00 a0 00 00:32:08.480 SET FEATURES [Set transfer mode]
- f8 00 00 00 00 00 e0 00 00:32:08.480 READ NATIVE MAX ADDRESS [OBS-ACS-3]
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement