Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Linux version 3.2.1-gentoo-r2 (root@poseidon) (gcc version 4.5.3 (Gentoo 4.5.3-r1 p1.0, pie-0.4.5) ) #1 SMP Thu Feb 23 14:15:30 UTC 2012
- Command line: root=/dev/ram0 init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs cdroot initrd=gentoo.igz vga=791 BOOT_IMAGE=gentoo
- BIOS-provided physical RAM map:
- BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
- BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 00000000cfe0ac00 (usable)
- BIOS-e820: 00000000cfe0ac00 - 00000000cfe5cc00 (ACPI NVS)
- BIOS-e820: 00000000cfe5cc00 - 00000000cfe5ec00 (ACPI data)
- BIOS-e820: 00000000cfe5ec00 - 00000000d0000000 (reserved)
- BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
- BIOS-e820: 00000000fe000000 - 00000000ff000000 (reserved)
- BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
- BIOS-e820: 0000000100000000 - 0000000830000000 (usable)
- NX (Execute Disable) protection: active
- DMI 2.5 present.
- DMI: Dell Inc. Precision WorkStation T5400 /0RW203, BIOS A04 08/21/2008
- e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- No AGP bridge found
- last_pfn = 0x830000 max_arch_pfn = 0x400000000
- MTRR default type: uncachable
- MTRR fixed ranges enabled:
- 00000-9FFFF write-back
- A0000-BFFFF uncachable
- C0000-D3FFF write-protect
- D4000-EFFFF uncachable
- F0000-FFFFF write-protect
- MTRR variable ranges enabled:
- 0 base 0000000000 mask 2000000000 write-back
- 1 base 00CFF00000 mask 3FFFF00000 uncachable
- 2 base 00D0000000 mask 3FF0000000 uncachable
- 3 base 00E0000000 mask 3FE0000000 uncachable
- 4 base 1FF0000000 mask 3FF0000000 uncachable
- 5 disabled
- 6 disabled
- 7 disabled
- e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved)
- last_pfn = 0xcfe0a max_arch_pfn = 0x400000000
- found SMP MP-table at [ffff8800000fe710] fe710
- initial memory mapped : 0 - 20000000
- Base memory trampoline at [ffff88000009c000] 9c000 size 8192
- init_memory_mapping: 0000000000000000-00000000cfe0a000
- 0000000000 - 00cfe00000 page 2M
- 00cfe00000 - 00cfe0a000 page 4k
- kernel direct mapping tables up to cfe0a000 @ 1fffa000-20000000
- init_memory_mapping: 0000000100000000-0000000830000000
- 0100000000 - 0830000000 page 2M
- kernel direct mapping tables up to 830000000 @ cfde8000-cfe0a000
- RAMDISK: 7fa3a000 - 7ffff000
- ACPI: RSDP 00000000000febf0 00024 (v02 DELL )
- ACPI: XSDT 00000000000fcd58 00074 (v01 DELL B9K 00000015 ASL 00000061)
- ACPI: FACP 00000000000fce88 000F4 (v03 DELL B9K 00000015 ASL 00000061)
- ACPI: DSDT 00000000fff62e18 03A12 (v01 DELL dt_ex 00001000 INTL 20050624)
- ACPI: FACS 00000000cfe0ac00 00040
- ACPI: SSDT 00000000fff6694b 000AC (v01 DELL st_ex 00001000 INTL 20050624)
- ACPI: APIC 00000000000fcf7c 000AA (v01 DELL B9K 00000015 ASL 00000061)
- ACPI: BOOT 00000000000fd026 00028 (v01 DELL B9K 00000015 ASL 00000061)
- ACPI: ASF! 00000000000fd04e 00096 (v32 DELL B9K 00000015 ASL 00000061)
- ACPI: MCFG 00000000000fd0e4 0003E (v01 DELL B9K 00000015 ASL 00000061)
- ACPI: HPET 00000000000fd122 00038 (v01 DELL B9K 00000015 ASL 00000061)
- ACPI: TCPA 00000000000fd37e 00032 (v01 DELL B9K 00000015 ASL 00000061)
- ACPI: ____ 00000000000fd3b0 00030 (v01 DELL B9K 00000015 ASL 00000061)
- ACPI: SLIC 00000000000fd15a 00176 (v01 DELL B9K 00000015 ASL 00000061)
- ACPI: Local APIC address 0xfee00000
- [ffffea0000000000-ffffea001cbfffff] PMD -> [ffff88080f600000-ffff88082b7fffff] on node 0
- Zone PFN ranges:
- DMA 0x00000010 -> 0x00001000
- DMA32 0x00001000 -> 0x00100000
- Normal 0x00100000 -> 0x00830000
- Movable zone start PFN for each node
- early_node_map[3] active PFN ranges
- 0: 0x00000010 -> 0x0000009e
- 0: 0x00000100 -> 0x000cfe0a
- 0: 0x00100000 -> 0x00830000
- On node 0 totalpages: 8387992
- DMA zone: 56 pages used for memmap
- DMA zone: 2 pages reserved
- DMA zone: 3924 pages, LIFO batch:0
- DMA32 zone: 14280 pages used for memmap
- DMA32 zone: 833090 pages, LIFO batch:31
- Normal zone: 103040 pages used for memmap
- Normal zone: 7433600 pages, LIFO batch:31
- ACPI: Local APIC address 0xfee00000
- ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
- ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
- ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
- ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
- ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
- ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
- ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
- ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
- ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
- IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
- ACPI: IOAPIC (id[0x09] address[0xfec88000] gsi_base[24])
- IOAPIC[1]: apic_id 9, version 32, address 0xfec88000, GSI 24-47
- ACPI: IOAPIC (id[0x0a] address[0xfec89000] gsi_base[48])
- IOAPIC[2]: apic_id 10, version 32, address 0xfec89000, GSI 48-71
- ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- ACPI: IRQ0 used by override.
- ACPI: IRQ2 used by override.
- ACPI: IRQ9 used by override.
- Using ACPI (MADT) for SMP configuration information
- ACPI: HPET id: 0x8086a201 base: 0xfed00000
- SMP: Allowing 8 CPUs, 4 hotplug CPUs
- nr_irqs_gsi: 88
- Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
- Booting paravirtualized kernel on bare hardware
- setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
- PERCPU: Embedded 26 pages/cpu @ffff88082fc00000 s75328 r8192 d22976 u262144
- pcpu-alloc: s75328 r8192 d22976 u262144 alloc=1*2097152
- pcpu-alloc: [0] 0 1 2 3 4 5 6 7
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8270614
- Kernel command line: root=/dev/ram0 init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs cdroot initrd=gentoo.igz vga=791 BOOT_IMAGE=gentoo
- PID hash table entries: 4096 (order: 3, 32768 bytes)
- Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
- Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
- xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
- Checking aperture...
- No AGP bridge found
- Memory: 32959460k/34340864k available (4119k kernel code, 788896k absent, 592508k reserved, 4381k data, 524k init)
- Hierarchical RCU implementation.
- NR_IRQS:4352 nr_irqs:1560 16
- Console: colour dummy device 80x25
- console [tty0] enabled
- hpet clockevent registered
- Fast TSC calibration using PIT
- Detected 3158.630 MHz processor.
- Calibrating delay loop (skipped), value calculated using timer frequency.. 6317.26 BogoMIPS (lpj=31586300)
- pid_max: default: 32768 minimum: 301
- Mount-cache hash table entries: 256
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 0
- mce: CPU supports 6 MCE banks
- CPU0: Thermal monitoring enabled (TM2)
- using mwait in idle threads.
- ACPI: Core revision 20110623
- ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- CPU0: Intel(R) Xeon(R) CPU X5460 @ 3.16GHz stepping 0a
- Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
- ... version: 2
- ... bit width: 40
- ... generic registers: 2
- ... value mask: 000000ffffffffff
- ... max period: 000000007fffffff
- ... fixed-purpose events: 3
- ... event mask: 0000000700000003
- Booting Node 0, Processors #1
- smpboot cpu 1: start_ip = 9c000
- #2
- smpboot cpu 2: start_ip = 9c000
- #3
- smpboot cpu 3: start_ip = 9c000
- Brought up 4 CPUs
- Total of 4 processors activated (25270.36 BogoMIPS).
- devtmpfs: initialized
- NET: Registered protocol family 16
- ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
- ACPI: bus type pci registered
- dca service started, version 1.12.1
- PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
- PCI: Using configuration type 1 for base access
- bio: create slab <bio-0> at 0
- ACPI: Added _OSI(Module Device)
- ACPI: Added _OSI(Processor Device)
- ACPI: Added _OSI(3.0 _SCP Extensions)
- ACPI: Added _OSI(Processor Aggregator Device)
- ACPI: EC: Look up EC in DSDT
- [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
- ACPI Warning: Incorrect checksum in table [TCPA] - 0x00, should be 0x87 (20110623/tbutils-314)
- ACPI: Interpreter enabled
- ACPI: (supports S0 S5)
- ACPI: Using IOAPIC for interrupt routing
- ACPI: No dock devices found.
- PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
- pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
- pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
- pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000effff]
- pci_root PNP0A03:00: host bridge window [mem 0x000f0000-0x000fffff]
- pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfe000000]
- pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xdfffffff]
- pci_root PNP0A03:00: host bridge window [mem 0xff980800-0xff980bff]
- pci_root PNP0A03:00: host bridge window [mem 0xff97c000-0xff97ffff]
- pci_root PNP0A03:00: host bridge window [mem 0xfed20000-0xfed9ffff]
- pci 0000:00:00.0: [8086:4001] type 0 class 0x000600
- pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:00.0: PME# disabled
- pci 0000:00:01.0: [8086:4021] type 1 class 0x000604
- pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:01.0: PME# disabled
- pci 0000:00:05.0: [8086:4025] type 1 class 0x000604
- pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:05.0: PME# disabled
- pci 0000:00:09.0: [8086:4029] type 1 class 0x000604
- pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:09.0: PME# disabled
- pci 0000:00:10.0: [8086:4030] type 0 class 0x000600
- pci 0000:00:10.1: [8086:4030] type 0 class 0x000600
- pci 0000:00:10.2: [8086:4030] type 0 class 0x000600
- pci 0000:00:10.3: [8086:4030] type 0 class 0x000600
- pci 0000:00:10.4: [8086:4030] type 0 class 0x000600
- pci 0000:00:11.0: [8086:4031] type 0 class 0x000600
- pci 0000:00:15.0: [8086:4035] type 0 class 0x000600
- pci 0000:00:15.1: [8086:4035] type 0 class 0x000600
- pci 0000:00:16.0: [8086:4036] type 0 class 0x000600
- pci 0000:00:16.1: [8086:4036] type 0 class 0x000600
- pci 0000:00:1b.0: [8086:269a] type 0 class 0x000403
- pci 0000:00:1b.0: reg 10: [mem 0xfbffc000-0xfbffffff 64bit]
- pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1b.0: PME# disabled
- pci 0000:00:1c.0: [8086:2690] type 1 class 0x000604
- pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.0: PME# disabled
- pci 0000:00:1d.0: [8086:2688] type 0 class 0x000c03
- pci 0000:00:1d.0: reg 20: [io 0xff80-0xff9f]
- pci 0000:00:1d.1: [8086:2689] type 0 class 0x000c03
- pci 0000:00:1d.1: reg 20: [io 0xff60-0xff7f]
- pci 0000:00:1d.2: [8086:268a] type 0 class 0x000c03
- pci 0000:00:1d.2: reg 20: [io 0xff40-0xff5f]
- pci 0000:00:1d.3: [8086:268b] type 0 class 0x000c03
- pci 0000:00:1d.3: reg 20: [io 0xff20-0xff3f]
- pci 0000:00:1d.7: [8086:268c] type 0 class 0x000c03
- pci 0000:00:1d.7: reg 10: [mem 0xff980800-0xff980bff]
- pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- pci 0000:00:1d.7: PME# disabled
- pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
- pci 0000:00:1f.0: [8086:2670] type 0 class 0x000601
- pci 0000:00:1f.1: [8086:269e] type 0 class 0x000101
- pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7]
- pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7]
- pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177]
- pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377]
- pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf]
- pci 0000:00:1f.2: [8086:2681] type 0 class 0x000106
- pci 0000:00:1f.2: reg 10: [io 0xfe00-0xfe07]
- pci 0000:00:1f.2: reg 14: [io 0xfe10-0xfe13]
- pci 0000:00:1f.2: reg 18: [io 0xfe20-0xfe27]
- pci 0000:00:1f.2: reg 1c: [io 0xfe30-0xfe33]
- pci 0000:00:1f.2: reg 20: [io 0xfec0-0xfedf]
- pci 0000:00:1f.2: reg 24: [mem 0xff970000-0xff9703ff]
- pci 0000:00:1f.2: PME# supported from D3hot
- pci 0000:00:1f.2: PME# disabled
- pci 0000:00:1f.3: [8086:269b] type 0 class 0x000c05
- pci 0000:00:1f.3: reg 20: [io 0xece0-0xecff]
- pci 0000:00:01.0: PCI bridge to [bus 01-01]
- pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff]
- pci 0000:02:00.0: [10de:019e] type 0 class 0x000300
- pci 0000:02:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
- pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
- pci 0000:02:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
- pci 0000:02:00.0: reg 24: [io 0xdc80-0xdcff]
- pci 0000:02:00.0: reg 30: [mem 0xfbd00000-0xfbd1ffff pref]
- pci 0000:00:05.0: PCI bridge to [bus 02-02]
- pci 0000:00:05.0: bridge window [io 0xd000-0xdfff]
- pci 0000:00:05.0: bridge window [mem 0xf8000000-0xfbdfffff]
- pci 0000:00:05.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
- pci 0000:03:00.0: [8086:3500] type 1 class 0x000604
- pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
- pci 0000:03:00.0: PME# disabled
- pci 0000:03:00.3: [8086:350c] type 1 class 0x000604
- pci 0000:03:00.3: PME# supported from D0 D3hot D3cold
- pci 0000:03:00.3: PME# disabled
- pci 0000:00:09.0: PCI bridge to [bus 03-07]
- pci 0000:00:09.0: bridge window [mem 0xf7f00000-0xf7ffffff]
- pci 0000:04:00.0: [8086:3510] type 1 class 0x000604
- pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
- pci 0000:04:00.0: PME# disabled
- pci 0000:04:01.0: [8086:3514] type 1 class 0x000604
- pci 0000:04:01.0: PME# supported from D0 D3hot D3cold
- pci 0000:04:01.0: PME# disabled
- pci 0000:03:00.0: PCI bridge to [bus 04-06]
- pci 0000:04:00.0: PCI bridge to [bus 05-05]
- pci 0000:04:01.0: PCI bridge to [bus 06-06]
- pci 0000:03:00.3: PCI bridge to [bus 07-07]
- pci 0000:08:00.0: [14e4:167a] type 0 class 0x000200
- pci 0000:08:00.0: reg 10: [mem 0xf7ef0000-0xf7efffff 64bit]
- pci 0000:08:00.0: PME# supported from D3hot D3cold
- pci 0000:08:00.0: PME# disabled
- pci 0000:00:1c.0: PCI bridge to [bus 08-08]
- pci 0000:00:1c.0: bridge window [mem 0xf7e00000-0xf7efffff]
- pci 0000:00:1e.0: PCI bridge to [bus 09-09] (subtractive decode)
- pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
- pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000effff] (subtractive decode)
- pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
- pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfe000000] (subtractive decode)
- pci 0000:00:1e.0: bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode)
- pci 0000:00:1e.0: bridge window [mem 0xff980800-0xff980bff] (subtractive decode)
- pci 0000:00:1e.0: bridge window [mem 0xff97c000-0xff97ffff] (subtractive decode)
- pci 0000:00:1e.0: bridge window [mem 0xfed20000-0xfed9ffff] (subtractive decode)
- pci_bus 0000:00: on NUMA node 0
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3.PCI4._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3.PCI4.PCI5._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3.PCI4.PCI6._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3.PCI7._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI8._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI9._PRT]
- pci0000:00: Unable to request _OSC control (_OSC support mask: 0x19)
- ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
- ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
- ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 15)
- ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 15)
- ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15)
- ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15)
- ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
- vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
- vgaarb: loaded
- vgaarb: bridge control possible 0000:02:00.0
- SCSI subsystem initialized
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- PCI: Using ACPI for IRQ routing
- PCI: pci_cache_line_size set to 64 bytes
- pci 0000:00:1f.2: no compatible bridge window for [mem 0xff970000-0xff9703ff]
- Expanded resource reserved due to conflict with PCI Bus 0000:00
- Expanded resource reserved due to conflict with PCI Bus 0000:00
- reserve RAM buffer: 000000000009ec00 - 000000000009ffff
- reserve RAM buffer: 00000000cfe0ac00 - 00000000cfffffff
- HPET: 3 timers in total, 0 timers will be used for per-cpu timer
- Switching to clocksource hpet
- pnp: PnP ACPI init
- ACPI: bus type pnp registered
- pnp 00:00: [bus 00-ff]
- pnp 00:00: [io 0x0cf8-0x0cff]
- pnp 00:00: [io 0x0000-0x0cf7 window]
- pnp 00:00: [io 0x0d00-0xffff window]
- pnp 00:00: [mem 0x000a0000-0x000bffff window]
- pnp 00:00: [mem 0x000c0000-0x000effff window]
- pnp 00:00: [mem 0x000f0000-0x000fffff window]
- pnp 00:00: [mem 0xf0000000-0xfe000000 window]
- pnp 00:00: [mem 0xcff00000-0xdfffffff window]
- pnp 00:00: [mem 0xf0000000-0xefffffff window disabled]
- pnp 00:00: [mem 0xff980800-0xff980bff window]
- pnp 00:00: [mem 0xff97c000-0xff97ffff window]
- pnp 00:00: [mem 0xfed20000-0xfed9ffff window]
- pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
- pnp 00:01: [io 0x0060]
- pnp 00:01: [io 0x0064]
- pnp 00:01: [io 0x0062-0x0063]
- pnp 00:01: [io 0x0065-0x006f]
- pnp 00:01: [io 0x00e0-0x00ef]
- pnp 00:01: [io 0x0800-0x085f]
- pnp 00:01: [io 0x0c00-0x0c7f]
- pnp 00:01: [io 0x0860-0x08ff]
- system 00:01: [io 0x0800-0x085f] has been reserved
- system 00:01: [io 0x0c00-0x0c7f] has been reserved
- system 00:01: [io 0x0860-0x08ff] has been reserved
- system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
- pnp 00:02: [io 0x0080-0x009f]
- pnp 00:02: [io 0x0000-0x001f]
- pnp 00:02: [io 0x00c0-0x00df]
- pnp 00:02: [dma 4]
- pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
- pnp 00:03: [io 0x00f0-0x00ff]
- pnp 00:03: [irq 13]
- pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
- pnp 00:04: [io 0x0061]
- pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
- pnp 00:05: [io 0x0070-0x007f]
- pnp 00:05: [irq 8]
- pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
- pnp 00:06: [io 0x0378-0x037f]
- pnp 00:06: [io 0x0778-0x077f]
- pnp 00:06: [irq 7]
- pnp 00:06: [dma 0 disabled]
- pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
- pnp 00:07: [io 0x03f8-0x03ff]
- pnp 00:07: [irq 4]
- pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
- pnp 00:08: [io 0x02f8-0x02ff]
- pnp 00:08: [irq 3]
- pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
- pnp 00:09: [mem 0xfed00000-0xfed003ff]
- pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
- pnp: PnP ACPI: found 10 devices
- ACPI: ACPI bus type pnp unregistered
- PCI: max bus depth: 3 pci_try_num: 4
- pci 0000:00:1f.2: BAR 5: assigned [mem 0xf0000000-0xf00003ff]
- pci 0000:00:1f.2: BAR 5: set to [mem 0xf0000000-0xf00003ff] (PCI address [0xf0000000-0xf00003ff])
- pci 0000:00:01.0: PCI bridge to [bus 01-01]
- pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff]
- pci 0000:00:05.0: PCI bridge to [bus 02-02]
- pci 0000:00:05.0: bridge window [io 0xd000-0xdfff]
- pci 0000:00:05.0: bridge window [mem 0xf8000000-0xfbdfffff]
- pci 0000:00:05.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
- pci 0000:04:00.0: PCI bridge to [bus 05-05]
- pci 0000:04:01.0: PCI bridge to [bus 06-06]
- pci 0000:03:00.0: PCI bridge to [bus 04-06]
- pci 0000:03:00.3: PCI bridge to [bus 07-07]
- pci 0000:00:09.0: PCI bridge to [bus 03-07]
- pci 0000:00:09.0: bridge window [mem 0xf7f00000-0xf7ffffff]
- pci 0000:00:1c.0: PCI bridge to [bus 08-08]
- pci 0000:00:1c.0: bridge window [mem 0xf7e00000-0xf7efffff]
- pci 0000:00:1e.0: PCI bridge to [bus 09-09]
- pci 0000:00:01.0: PCI INT A -> GSI 48 (level, low) -> IRQ 48
- pci 0000:00:01.0: setting latency timer to 64
- pci 0000:00:05.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
- pci 0000:00:05.0: setting latency timer to 64
- pci 0000:00:09.0: PCI INT A -> GSI 56 (level, low) -> IRQ 56
- pci 0000:00:09.0: setting latency timer to 64
- pci 0000:03:00.0: PCI INT A -> GSI 56 (level, low) -> IRQ 56
- pci 0000:03:00.0: setting latency timer to 64
- pci 0000:04:00.0: PCI INT A -> GSI 56 (level, low) -> IRQ 56
- pci 0000:04:00.0: setting latency timer to 64
- pci 0000:04:01.0: PCI INT A -> GSI 56 (level, low) -> IRQ 56
- pci 0000:04:01.0: setting latency timer to 64
- pci 0000:03:00.3: setting latency timer to 64
- pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- pci 0000:00:1c.0: setting latency timer to 64
- pci 0000:00:1e.0: setting latency timer to 64
- pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000effff]
- pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff]
- pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfe000000]
- pci_bus 0000:00: resource 10 [mem 0xcff00000-0xdfffffff]
- pci_bus 0000:00: resource 11 [mem 0xff980800-0xff980bff]
- pci_bus 0000:00: resource 12 [mem 0xff97c000-0xff97ffff]
- pci_bus 0000:00: resource 13 [mem 0xfed20000-0xfed9ffff]
- pci_bus 0000:01: resource 1 [mem 0xfbe00000-0xfbefffff]
- pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
- pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbdfffff]
- pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
- pci_bus 0000:03: resource 1 [mem 0xf7f00000-0xf7ffffff]
- pci_bus 0000:08: resource 1 [mem 0xf7e00000-0xf7efffff]
- pci_bus 0000:09: resource 4 [io 0x0000-0x0cf7]
- pci_bus 0000:09: resource 5 [io 0x0d00-0xffff]
- pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
- pci_bus 0000:09: resource 7 [mem 0x000c0000-0x000effff]
- pci_bus 0000:09: resource 8 [mem 0x000f0000-0x000fffff]
- pci_bus 0000:09: resource 9 [mem 0xf0000000-0xfe000000]
- pci_bus 0000:09: resource 10 [mem 0xcff00000-0xdfffffff]
- pci_bus 0000:09: resource 11 [mem 0xff980800-0xff980bff]
- pci_bus 0000:09: resource 12 [mem 0xff97c000-0xff97ffff]
- pci_bus 0000:09: resource 13 [mem 0xfed20000-0xfed9ffff]
- NET: Registered protocol family 2
- IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
- TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
- TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- TCP: Hash tables configured (established 262144 bind 65536)
- TCP reno registered
- UDP hash table entries: 16384 (order: 7, 524288 bytes)
- UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
- NET: Registered protocol family 1
- RPC: Registered named UNIX socket transport module.
- RPC: Registered udp transport module.
- RPC: Registered tcp transport module.
- RPC: Registered tcp NFSv4.1 backchannel transport module.
- pci 0000:02:00.0: Boot video device
- PCI: CLS 64 bytes, default 64
- Trying to unpack rootfs image as initramfs...
- Freeing initrd memory: 5908k freed
- PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- Placing 64MB software IO TLB between ffff8800cbde8000 - ffff8800cfde8000
- software IO TLB at phys 0xcbde8000 - 0xcfde8000
- Simple Boot Flag at 0x7a set to 0x1
- VFS: Disk quotas dquot_6.5.2
- Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- squashfs: version 4.0 (2009/01/31) Phillip Lougher
- NTFS driver 2.1.30 [Flags: R/O].
- SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
- SGI XFS Quota Management subsystem
- msgmni has been set to 32768
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
- io scheduler noop registered
- io scheduler deadline registered (default)
- pcieport 0000:00:1c.0: setting latency timer to 64
- pcieport 0000:00:1c.0: irq 88 for MSI/MSI-X
- Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- intel_rng: Firmware space is locked read-only. If you can't or
- intel_rng: don't want to disable this in firmware setup, and if
- intel_rng: you are certain that your system has a functional
- intel_rng: RNG, try using the 'no_fwh_detect' option.
- Linux agpgart interface v0.103
- vesafb: mode is 1024x768x16, linelength=2048, pages=1
- vesafb: scrolling: redraw
- vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
- vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90010100000, using 3072k, total 14336k
- Console: switching to colour frame buffer device 128x48
- fb0: VESA VGA frame buffer device
- ioatdma: Intel(R) QuickData Technology Driver 4.00
- XENFS: not registering filesystem on non-xen platform
- brd: module loaded
- loop: module loaded
- Loading iSCSI transport class v2.0-870.
- iscsi: registered transport (tcp)
- st: Version 20101219, fixed bufsize 32768, s/g segs 256
- SCSI Media Changer driver v0.25
- Atheros(R) L2 Ethernet Driver - version 2.2.3
- Copyright (c) 2007 Atheros Corporation.
- jme: JMicron JMC2XX ethernet driver version 1.0.8
- aoe: AoE v47 initialised.
- i8042: PNP: No PS/2 controller found. Probing ports directly.
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX port at 0x60,0x64 irq 12
- mousedev: PS/2 mouse device common for all mice
- cpuidle: using governor ladder
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- TCP cubic registered
- NET: Registered protocol family 17
- Registering the dns_resolver key type
- Freeing unused kernel memory: 524k freed
- Write protecting the kernel read-only data: 8192k
- Freeing unused kernel memory: 2008k freed
- Freeing unused kernel memory: 624k freed
- libata version 3.00 loaded.
- Refined TSC clocksource calibration: 3158.749 MHz.
- Switching to clocksource tsc
- ahci 0000:00:1f.2: version 3.0
- ahci 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
- ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x1f impl SATA mode
- ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part
- ahci 0000:00:1f.2: setting latency timer to 64
- scsi0 : ahci
- scsi1 : ahci
- scsi2 : ahci
- scsi3 : ahci
- scsi4 : ahci
- scsi5 : ahci
- ata1: SATA max UDMA/133 abar m1024@0xf0000000 port 0xf0000100 irq 20
- ata2: SATA max UDMA/133 abar m1024@0xf0000000 port 0xf0000180 irq 20
- ata3: SATA max UDMA/133 abar m1024@0xf0000000 port 0xf0000200 irq 20
- ata4: SATA max UDMA/133 abar m1024@0xf0000000 port 0xf0000280 irq 20
- ata5: SATA max UDMA/133 abar m1024@0xf0000000 port 0xf0000300 irq 20
- ata6: DUMMY
- ata4: SATA link down (SStatus 0 SControl 300)
- ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata1.00: ATA-8: ST31000528AS, CC38, max UDMA/133
- ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
- ata1.00: configured for UDMA/133
- scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
- sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
- sd 0:0:0:0: [sda] Write Protect is off
- sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- ata2: SATA link down (SStatus 0 SControl 300)
- ata5: SATA link down (SStatus 4 SControl 300)
- ata3.00: ATAPI: HL-DT-ST DVD-ROM DH20N, A100, max UDMA/100
- ata3.00: configured for UDMA/100
- scsi 2:0:0:0: CD-ROM HL-DT-ST DVD-ROM DH20N A100 PQ: 0 ANSI: 5
- sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
- cdrom: Uniform CD-ROM driver Revision: 3.20
- sr 2:0:0:0: Attached scsi CD-ROM sr0
- sda: sda1 sda2 < sda5 sda6 sda7 >
- sd 0:0:0:0: [sda] Attached SCSI disk
- ata_piix 0000:00:1f.1: version 2.13
- ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- ata_piix 0000:00:1f.1: setting latency timer to 64
- scsi6 : ata_piix
- scsi7 : ata_piix
- ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
- ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
- ata7: port disabled--ignoring
- ata8: port disabled--ignoring
- sd 0:0:0:0: Attached scsi generic sg0 type 0
- sr 2:0:0:0: Attached scsi generic sg1 type 5
- scsi: <fdomain> Detection failed (no card)
- GDT-HA: Storage RAID Controller Driver. Version: 3.05
- Fusion MPT base driver 3.04.20
- Copyright (c) 1999-2008 LSI Corporation
- Fusion MPT SPI Host driver 3.04.20
- Fusion MPT FC Host driver 3.04.20
- Fusion MPT SAS Host driver 3.04.20
- 3ware Storage Controller device driver for Linux v1.26.02.003.
- 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
- Compaq SMART2 Driver (v 2.6.0)
- HP CISS Driver (v 3.6.26)
- Adaptec aacraid driver 1.1-7[28000]-ms
- megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
- megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
- megasas: 00.00.06.12-rc1 Wed. Oct. 5 17:00:00 PDT 2011
- qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.03.07.12-k.
- Emulex LightPulse Fibre Channel SCSI driver 8.3.27
- Copyright(c) 2004-2009 Emulex. All rights reserved.
- aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
- ehci_hcd 0000:00:1d.7: setting latency timer to 64
- ehci_hcd 0000:00:1d.7: EHCI Host Controller
- ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
- ehci_hcd 0000:00:1d.7: debug port 1
- ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
- ehci_hcd 0000:00:1d.7: irq 21, io mem 0xff980800
- ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb1: Product: EHCI Host Controller
- usb usb1: Manufacturer: Linux 3.2.1-gentoo-r2 ehci_hcd
- usb usb1: SerialNumber: 0000:00:1d.7
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 8 ports detected
- Initializing USB Mass Storage driver...
- usbcore: registered new interface driver usb-storage
- USB Mass Storage support registered.
- uhci_hcd: USB Universal Host Controller Interface driver
- uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
- uhci_hcd 0000:00:1d.0: setting latency timer to 64
- uhci_hcd 0000:00:1d.0: UHCI Host Controller
- uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
- uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
- usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb2: Product: UHCI Host Controller
- usb usb2: Manufacturer: Linux 3.2.1-gentoo-r2 uhci_hcd
- usb usb2: SerialNumber: 0000:00:1d.0
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
- uhci_hcd 0000:00:1d.1: setting latency timer to 64
- uhci_hcd 0000:00:1d.1: UHCI Host Controller
- uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
- uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
- usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb3: Product: UHCI Host Controller
- usb usb3: Manufacturer: Linux 3.2.1-gentoo-r2 uhci_hcd
- usb usb3: SerialNumber: 0000:00:1d.1
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- uhci_hcd 0000:00:1d.2: setting latency timer to 64
- uhci_hcd 0000:00:1d.2: UHCI Host Controller
- uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
- uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
- usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb4: Product: UHCI Host Controller
- usb usb4: Manufacturer: Linux 3.2.1-gentoo-r2 uhci_hcd
- usb usb4: SerialNumber: 0000:00:1d.2
- hub 4-0:1.0: USB hub found
- hub 4-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
- uhci_hcd 0000:00:1d.3: setting latency timer to 64
- uhci_hcd 0000:00:1d.3: UHCI Host Controller
- uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
- uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
- usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb5: Product: UHCI Host Controller
- usb usb5: Manufacturer: Linux 3.2.1-gentoo-r2 uhci_hcd
- usb usb5: SerialNumber: 0000:00:1d.3
- hub 5-0:1.0: USB hub found
- hub 5-0:1.0: 2 ports detected
- ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- sl811: driver sl811-hcd, 19 May 2005
- usb 1-8: new high-speed USB device number 4 using ehci_hcd
- usb 1-8: New USB device found, idVendor=13fe, idProduct=3e00
- usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- usb 1-8: Product: USB DISK 2.0
- usb 1-8: Manufacturer:
- usb 1-8: SerialNumber: 07BB01087B4F6AE1
- scsi8 : usb-storage 1-8:1.0
- usb 2-2: new low-speed USB device number 2 using uhci_hcd
- device-mapper: uevent: version 1.0.3
- device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- usb 2-2: New USB device found, idVendor=046d, idProduct=c05a
- usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- usb 2-2: Product: USB Optical Mouse
- usb 2-2: Manufacturer: Logitech
- input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input0
- generic-usb 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-2/input0
- md: raid0 personality registered for level 0
- md: raid1 personality registered for level 1
- usb 3-2: new low-speed USB device number 2 using uhci_hcd
- usb 3-2: New USB device found, idVendor=03f9, idProduct=0100
- usb 3-2: New USB device strings: Mfr=4, Product=26, SerialNumber=0
- usb 3-2: Product: Keytronic USB Keyboard
- usb 3-2: Manufacturer: Key Tronic
- raid6: int64x1 2675 MB/s
- scsi 8:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 4
- sd 8:0:0:0: Attached scsi generic sg2 type 0
- sd 8:0:0:0: [sdb] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB)
- sd 8:0:0:0: [sdb] Write Protect is off
- sd 8:0:0:0: [sdb] Mode Sense: 23 00 00 00
- sd 8:0:0:0: [sdb] No Caching mode page present
- sd 8:0:0:0: [sdb] Assuming drive cache: write through
- sd 8:0:0:0: [sdb] No Caching mode page present
- sd 8:0:0:0: [sdb] Assuming drive cache: write through
- sdb: sdb1
- sd 8:0:0:0: [sdb] No Caching mode page present
- sd 8:0:0:0: [sdb] Assuming drive cache: write through
- sd 8:0:0:0: [sdb] Attached SCSI removable disk
- input: Key Tronic Keytronic USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input1
- generic-usb 0003:03F9:0100.0002: input,hidraw1: USB HID v1.10 Keyboard [Key Tronic Keytronic USB Keyboard] on usb-0000:00:1d.1-2/input0
- raid6: int64x2 2790 MB/s
- raid6: int64x4 2482 MB/s
- raid6: int64x8 1937 MB/s
- raid6: sse2x1 4467 MB/s
- raid6: sse2x2 8574 MB/s
- raid6: sse2x4 9653 MB/s
- raid6: using algorithm sse2x4 (9653 MB/s)
- async_tx: api initialized (async)
- xor: automatically using best checksumming function: generic_sse
- generic_sse: 12078.000 MB/sec
- xor: using function: generic_sse (12078.000 MB/sec)
- md: raid6 personality registered for level 6
- md: raid5 personality registered for level 5
- md: raid4 personality registered for level 4
- md: raid10 personality registered for level 10
- Btrfs loaded
- JFS: nTxBlock = 8192, nTxLock = 65536
- fuse init (API version 7.17)
- e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
- e1000: Copyright (c) 1999-2006 Intel Corporation.
- tg3.c:v3.121 (November 2, 2011)
- tg3 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- tg3 0000:08:00.0: setting latency timer to 64
- tg3 0000:08:00.0: eth0: Tigon3 [partno(BCM95754) rev b002] (PCI Express) MAC address 00:23:ae:a1:58:cf
- tg3 0000:08:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
- tg3 0000:08:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
- tg3 0000:08:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
- ISO 9660 Extensions: Microsoft Joliet Level 3
- ISOFS: changing to secondary root
- NTFS volume version 3.1.
- attempt to access beyond end of device
- sda2: rw=0, want=18, limit=2
- REISERFS warning (device sda2): sh-2006 read_super_block: bread failed (dev sda2, block 8, size 1024)
- attempt to access beyond end of device
- sda2: rw=0, want=130, limit=2
- REISERFS warning (device sda2): sh-2006 read_super_block: bread failed (dev sda2, block 64, size 1024)
- attempt to access beyond end of device
- sda2: rw=0, want=4, limit=2
- EXT3-fs (sda2): error: unable to read superblock
- attempt to access beyond end of device
- sda2: rw=0, want=4, limit=2
- EXT2-fs (sda2): error: unable to read superblock
- attempt to access beyond end of device
- sda2: rw=0, want=4, limit=2
- EXT4-fs (sda2): unable to read superblock
- attempt to access beyond end of device
- sda2: rw=0, want=66, limit=2
- isofs_fill_super: bread failed, dev=sda2, iso_blknum=16, block=32
- attempt to access beyond end of device
- sda2: rw=0, want=3, limit=2
- attempt to access beyond end of device
- sda2: rw=0, want=3, limit=2
- attempt to access beyond end of device
- sda2: rw=0, want=18, limit=2
- attempt to access beyond end of device
- sda2: rw=0, want=65, limit=2
- attempt to access beyond end of device
- sda2: rw=0, want=257, limit=2
- UDF-fs: error (device sda2): udf_read_tagged: read failed, block=256, location=256
- UDF-fs: error (device sda2): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
- attempt to access beyond end of device
- sda2: rw=0, want=513, limit=2
- UDF-fs: error (device sda2): udf_read_tagged: read failed, block=512, location=512
- UDF-fs: error (device sda2): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
- UDF-fs: error (device sda2): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
- attempt to access beyond end of device
- sda2: rw=0, want=68, limit=2
- attempt to access beyond end of device
- sda2: rw=0, want=1028, limit=2
- UDF-fs: error (device sda2): udf_read_tagged: read failed, block=256, location=256
- attempt to access beyond end of device
- sda2: rw=0, want=2052, limit=2
- UDF-fs: error (device sda2): udf_read_tagged: read failed, block=512, location=512
- UDF-fs: warning (device sda2): udf_fill_super: No partition found (1)
- attempt to access beyond end of device
- sda2: rw=0, want=72, limit=2
- attempt to access beyond end of device
- sda2: rw=0, want=128, limit=2
- UDF-fs: warning (device sda6): udf_fill_super: No partition found (1)
- kjournald starting. Commit interval 5 seconds
- EXT3-fs (sda7): mounted filesystem with writeback data mode
- udev[19410]: starting version 164
- input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
- ACPI: Power Button [VBTN]
- input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
- ACPI: Power Button [PWRF]
- Real Time Clock Driver v1.12b
- dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
- snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- snd_hda_intel 0000:00:1b.0: irq 89 for MSI/MSI-X
- snd_hda_intel 0000:00:1b.0: setting latency timer to 64
- warning: process `hwsetup' used the deprecated sysctl system call with 1.23.
- NET: Registered protocol family 10
- kjournald starting. Commit interval 5 seconds
- EXT3-fs (sda7): using internal journal
- EXT3-fs (sda7): mounted filesystem with writeback data mode
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement