- ok boot u:\vml1 console=ttyS0,115200 nolapic noapic no-hlt no-acpi
- Boot device: /usb/disk:\vml1 Arguments: console=ttyS0,115200 nolapic noapic no-
- hlt no-acpiBoot device: /usb/disk:\vml1 Arguments: console=ttyS0,115200 nolapic
- noapic no-hlt no-acpi
- Initializing cgroup subsys cpuset
- Initializing cgroup subsys cpu
- Linux version 2.6.29-0.258.2.3.rc8.git2.fc11.i586 (mockbuild@x86-3.fedora.phx.re
- dhat.com) (gcc version 4.4.0 20090323 (Red Hat 4.4.0-0.29) (GCC) ) #1 SMP Tue Ma
- r 24 18:37:23 EDT 2009
- KERNEL supported cpus:
- Intel GenuineIntel
- AMD AuthenticAMD
- NSC Geode by NSC
- Cyrix CyrixInstead
- Centaur CentaurHauls
- Transmeta GenuineTMx86
- Transmeta TransmetaCPU
- UMC UMC UMC UMC
- BIOS-provided physical RAM map:
- BIOS-e801: 0000000000000000 - 000000000009f000 (usable)
- BIOS-e801: 0000000000100000 - 000000001bbec000 (usable)
- DMI not present or invalid.
- last_pfn = 0x1bbec max_arch_pfn = 0x100000
- x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- Using x86 segment limits to approximate NX protection
- ACPI Error (tbxfroot-0219): A valid RSDP was not found [20081204]
- 0MB HIGHMEM available.
- 443MB LOWMEM available.
- mapped low ram: 0 - 1bbec000
- low ram: 00000000 - 1bbec000
- bootmap 00002000 - 00005780
- (8 early reservations) ==> bootmem [0000000000 - 001bbec000]
- #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
- #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
- #3 [0000400000 - 0000fd5bac] TEXT DATA BSS ==> [0000400000 - 0000fd5bac]
- #4 [0000fd6000 - 0000fdb000] INIT_PG_TABLE ==> [0000fd6000 - 0000fdb000]
- #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
- #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
- #7 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000]
- Zone PFN ranges:
- DMA 0x00000000 -> 0x00001000
- Normal 0x00001000 -> 0x0001bbec
- HighMem 0x0001bbec -> 0x0001bbec
- Movable zone start PFN for each node
- early_node_map[2] active PFN ranges
- 0: 0x00000000 -> 0x0000009f
- 0: 0x00000100 -> 0x0001bbec
- Using APIC driver default
- SMP: Allowing 1 CPUs, 0 hotplug CPUs
- PM: Registered nosave memory: 000000000009f000 - 0000000000100000
- Allocating PCI resources starting at 20000000 (gap: 1bbec000:e4414000)
- NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
- PERCPU: Allocating 1351680 bytes of per cpu data
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 111882
- Kernel command line: console=ttyS0,115200 nolapic noapic no-hlt no-acpi
- Enabling fast FPU save and restore... done.
- Enabling unmasked SIMD FPU exception support... done.
- Initializing CPU#0
- PID hash table entries: 2048 (order: 11, 8192 bytes)
- Fast TSC calibration using PIT
- Detected 799.870 MHz processor.
- Console: colour EGA 80x25
- console [ttyS0] enabled
- Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
- ... MAX_LOCKDEP_SUBCLASSES: 8
- ... MAX_LOCK_DEPTH: 48
- ... MAX_LOCKDEP_KEYS: 8191
- ... CLASSHASH_SIZE: 4096
- ... MAX_LOCKDEP_ENTRIES: 8192
- ... MAX_LOCKDEP_CHAINS: 16384
- ... CHAINHASH_SIZE: 8192
- memory used by lock dependency info: 2591 kB
- per task-struct memory footprint: 1920 bytes
- Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- allocated 2272880 bytes of page_cgroup
- please try cgroup_disable=memory option if you don't want
- Memory: 431212k/454576k available (3021k kernel code, 22868k reserved, 1921k dat
- a, 1672k init, 0k highmem)
- virtual kernel memory layout:
- fixmap : 0xffc56000 - 0xfffff000 (3748 kB)
- pkmap : 0xff400000 - 0xff800000 (4096 kB)
- vmalloc : 0xdc3ec000 - 0xff3fe000 ( 560 MB)
- lowmem : 0xc0000000 - 0xdbbec000 ( 443 MB)
- .init : 0xc08d8000 - 0xc0a7a000 (1672 kB)
- .data : 0xc06f37ca - 0xc08d3df0 (1921 kB)
- .text : 0xc0400000 - 0xc06f37ca (3021 kB)
- Checking if this processor honours the WP bit even in supervisor mode...Ok.
- SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- Calibrating delay loop (skipped), value calculated using timer frequency.. 1599.
- 74 BogoMIPS (lpj=799870)
- Security Framework initialized
- SELinux: Initializing.
- Mount-cache hash table entries: 512
- Initializing cgroup subsys ns
- Initializing cgroup subsys cpuacct
- Initializing cgroup subsys memory
- Initializing cgroup subsys devices
- Initializing cgroup subsys freezer
- Initializing cgroup subsys net_cls
- CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
- CPU: L2 Cache: 128K (64 bytes/line)
- Checking 'hlt' instruction... disabled
- SMP alternatives: switching to UP code
- Freeing SMP alternatives: 11k freed
- ftrace: converting mcount calls to 0f 1f 44 00 00
- ftrace: allocating 17494 entries in 69 pages
- weird, boot CPU (#0) not listed by the BIOS.
- SMP motherboard not detected.
- Local APIC not detected. Using dummy APIC emulation.
- SMP disabled
- Brought up 1 CPUs
- Total of 1 processors activated (1599.74 BogoMIPS).
- khelper used greatest stack depth: 2996 bytes left
- net_namespace: 1240 bytes
- Booting paravirtualized kernel on bare hardware
- regulator: core version 0.5
- Time: 20:06:42 Date: 03/02/09
- NET: Registered protocol family 16
- PCI: Using configuration type 1 for base access
- bio: create slab <bio-0> at 0
- ACPI: Interpreter disabled.
- SCSI subsystem initialized
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- PCI: Probing PCI hardware
- pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot
- pci 0000:00:0b.0: PME# disabled
- pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:00:0c.0: PME# disabled
- pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:00:0d.0: PME# disabled
- pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:00:10.0: PME# disabled
- pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:00:10.1: PME# disabled
- pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:00:10.2: PME# disabled
- pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:00:10.4: PME# disabled
- pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:14.0: PME# disabled
- NetLabel: Initializing
- NetLabel: domain hash size = 128
- NetLabel: protocols = UNLABELED CIPSOv4
- NetLabel: unlabeled traffic allowed by default
- DMA-API: preallocated 8192 debug entries
- DMA-API: debugging enabled by kernel config
- pnp: PnP ACPI: disabled
- pci 0000:00:13.0: PCI bridge, secondary bus 0000:01
- pci 0000:00:13.0: IO window: disabled
- pci 0000:00:13.0: MEM window: disabled
- pci 0000:00:13.0: PREFETCH window: disabled
- NET: Registered protocol family 2
- IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
- TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- TCP bind hash table entries: 16384 (order: 7, 655360 bytes)
- TCP: Hash tables configured (established 16384 bind 16384)
- TCP reno registered
- NET: Registered protocol family 1
- platform rtc_cmos: registered platform RTC device (no PNP device found)
- eps: Detected VIA Model D C7-M
- eps: Current voltage = 796mV
- eps: Current multiplier = 4
- eps: Highest voltage = 988mV
- eps: Highest multiplier = 8
- eps: Lowest voltage = 796mV
- eps: Lowest multiplier = 4
- apm: BIOS version 102.32 Flags 0x206f (Driver version 1.16ac)
- general protection fault: 0000 [#1] SMP
- last sysfs file:
- Modules linked in:
- Pid: 243, comm: kapmd Not tainted (2.6.29-0.258.2.3.rc8.git2.fc11.i586 #1)
- EIP: 0060:[<c04126c7>] EFLAGS: 00010046 CPU: 0
- EIP is at apm_bios_call_simple+0x76/0xc7
- EAX: 0000530e EBX: 00000000 ECX: 00000102 EDX: 00000000
- ESI: 0000530e EDI: c1689000 EBP: da9ecf88 ESP: da9ecf44
- DS: 0000 ES: 0000 FS: 0000 GS: 0000 SS: 0068
- Process kapmd (pid: 243, ti=da9ec000 task=da8229e0 task.ti=da9ec000)
- Stack:
- da9ecf88 c1689000 0000007b 0000007b c0a79100 00000102 da9ecfb8 00000000
- 00000000 00000001 000000d8 00000000 00000286 c0a79100 c04133a3 00000000
- 00000000 da9ecfd0 c0413417 da9ecfb8 db4d0000 00000001 c0a79100 00000000
- Call Trace:
- [<c04133a3>] ? apm+0x0/0x4ed
- [<c0413417>] ? apm+0x74/0x4ed
- [<c0422cb6>] ? complete+0x39/0x43
- [<c044f6b0>] ? trace_hardirqs_on+0xb/0xd
- [<c04133a3>] ? apm+0x0/0x4ed
- [<c044181a>] ? kthread+0x41/0x65
- [<c04417d9>] ? kthread+0x0/0x65
- [<c04048f7>] ? kernel_thread_helper+0x7/0x10
- Code: 47 44 00 92 40 00 e8 e7 fe ff ff 89 45 ec 8c e2 89 55 e4 8c e8 89 45 e8 8b
- 4d d0 89 f0 1e 06 31 d2 8e da 8e c2 8e e2 8e ea 57 55 <2e> ff 1d c0 8b ac c0 0f
- 92 c3 5d 5f 07 1f 8b 55 d4 89 02 31 c0
- EIP: [<c04126c7>] apm_bios_call_simple+0x76/0xc7 SS:ESP 0068:da9ecf44
- ---[ end trace a7919e7f17c0a725 ]---
- kapmd used greatest stack depth: 2724 bytes left
- audit: initializing netlink socket (disabled)
- type=2000 audit(1236024400.000:1): initialized
- HugeTLB registered 4 MB page size, pre-allocated 0 pages
- VFS: Disk quotas dquot_6.5.2
- Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- msgmni has been set to 842
- SELinux: Registering netfilter hooks
- alg: No test for stdrng (krng)
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- io scheduler noop registered
- io scheduler cfq registered (default)
- pci 0000:00:01.0: Boot video device
- PCI: VIA PCI bridge detected. Disabling DAC.
- pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- isapnp: Scanning for PnP cards...
- isapnp: No Plug & Play device found
- Non-volatile memory driver v1.3
- Linux agpgart interface v0.103
- Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled