2016-12-03 20:27:23  ★ Dean Hawthorne walks to the work bench, grabbing his hydraulic jack and walking to the front of the truck.
2016-12-03 20:27:39  ★ Dean Hawthorne places it beneath the chasis, securing it, and jacks the truck up to the right heighth.
2016-12-03 20:30:39  ★ Dean Hawthorne walks to to the work bench, grabbing a tire iron and walking to the front right wheel.
2016-12-03 20:30:50  ★ Dean Hawthorne begins to undo the lug nuts, pocketing them.
2016-12-03 20:30:57  ★ Dean Hawthorne takes the tire off, laying it beside himself.
2016-12-03 20:31:10  ★ Dean Hawthorne walks to the front left tire after picking up the tire iron.
2016-12-03 20:31:29  ★ Dean Hawthorne begins to unbolt the lug nuts,pocketing them and removing the tire and placing it next to hi
2016-12-03 20:31:31  Dean Hawthorne: (( him ))
2016-12-03 20:32:57  ★ Dean Hawthorne walks to the work bench, placing down the tire iron down and picking up an 18 mm socket wren
2016-12-03 20:32:59  Dean Hawthorne: (( wrench ))
2016-12-03 20:33:29  ★ Dean Hawthorne gets below the right wheel well and begins to unbolt the top strut bolt.
2016-12-03 20:33:32  ★ bolt would become loose      ((Dean Hawthorne))
2016-12-03 20:33:38  ★ Dean Hawthorne takes the bolt, pocketing it.
2016-12-03 20:33:50  ★ Dean Hawthorne walks to the other wheel well, climbs under neath the wheel well.
2016-12-03 20:34:15  ★ Dean Hawthorne begins to use his socket wrench to unbolt the top strut bolt, loosening it and pocketing it.
2016-12-03 20:34:37  ★ Dean Hawthorne begins to unbolt the upper ball joint nut, eventually pocketing it.
2016-12-03 20:34:53  ★ Dean Hawthorne walks to the other side, climbing underneath and unbolts the upper ball joint nut, eventua-.
2016-12-03 20:34:55  ★ pocketing it.      ((Dean Hawthorne))
2016-12-03 20:35:20  ★ Dean Hawthorne walks to the work bench, grabbing a hammer and pocketing a wrench.
2016-12-03 20:35:42  ★ Dean Hawthorne climbs underneath the right wheel well, and begins to bang on the ball joint, seperating-..
2016-12-03 20:35:46  ★ it from the knuckle.      ((Dean Hawthorne))
2016-12-03 20:36:00  ★ Dean Hawthorne walks to the left front wheel well, climbing underneath as he begins to bang ont he ball -..
2016-12-03 20:36:07  ★ joint, seperating it from the knuckle.      ((Dean Hawthorne))
2016-12-03 20:36:35  ★ Dean Hawthorne walks back to the work bench, as he grabs a 22mm wrench, returning to the front wheel well.
2016-12-03 20:36:58  ★ Dean Hawthorne begins to use the 22mm wrench to remove the bolt from the steering linkage.
2016-12-03 20:37:16  ★ Dean Hawthorne slides across the floor to the left wheel well, using the 22mm wrench to unbolt the steering
2016-12-03 20:37:18  ★ linkage.      ((Dean Hawthorne))
2016-12-03 20:38:34  ★ Dean Hawthorne walks back to the work bench as he grabs a 15mm wrench, returning to the truck.
2016-12-03 20:38:56  ★ Dean Hawthorne slides under the right wheel well, as he uses the 15mm wrench to remove the swaybar-..
2016-12-03 20:38:59  ★ nut and bushing.      ((Dean Hawthorne))
2016-12-03 20:39:11  ★ Dean Hawthorne slides over to the left wheel well, performing the same action.
2016-12-03 20:39:54  ★ Dean Hawthorne using the 15mm wrench, he begins to unbolt the bottom  of the strut mount.
2016-12-03 20:40:12  ★ Dean Hawthorne walk to the work bench as he places the 15mm wrench in his duffle, he grabs a flat head.
2016-12-03 20:40:27  ★ Dean Hawthorne returns to the truck, sliding underneath it.
2016-12-03 20:41:09  ★ Dean Hawthorne using the screw driver, he removes the bolt clips from the bottom of the strut, releasing it
2016-12-03 20:41:21  ★ Dean Hawthorne reaches for the body lift kit
2016-12-03 20:41:36  ★ Dean Hawthorne reaches for the strut mount, placing the spacer between the strut, alligning it perfectly.
2016-12-03 20:41:50  ★ Dean Hawthorne begins to replace the OEM bolts, with the new 10mm bolts, keeping them loose.
2016-12-03 20:42:01  ★ Dean Hawthorne slides out, walking to the bench and grabbing a 10mm wrench.
2016-12-03 20:42:10  ★ Dean Hawthorne returns, securing the 10mm bolts in tightly.
2016-12-03 20:42:42  ★ Dean Hawthorne grabs his 18mm wrench from his duffle, as he places the upper strut nut on, tighting it to
2016-12-03 20:42:45  ★ factory specs.      ((Dean Hawthorne))
2016-12-03 20:43:14  ★ Dean Hawthorne raises the upper control arm, and lowers the ball joint, connecting them to the spindle.
2016-12-03 20:43:42  ★ Dean Hawthorne connects the upper control arm and ball joint via a 18mm bolt, securing it with the wrench.
2016-12-03 20:44:08  ★ Dean Hawthorne removes a 21mm wrench from his duffle, as he begins to reconnect the steering linkage.
2016-12-03 20:45:23  ★ Dean Hawthorne slides to the left steering well, as he unbolts the upper strut bolt, releasing the strutt.
2016-12-03 20:45:32  ★ Dean Hawthorne places the spacer between the strut, eventually tighening it.
2016-12-03 20:46:07  ★ Dean Hawthorne places his hand on the sway bar, fixing it back into position as he picks up the bolts.
2016-12-03 20:46:20  ★ Dean Hawthorne places the bolt back into there slot, as he bolts them and ensures theyre secure.
2016-12-03 20:46:31  ★ Dean Hawthorne walks to the front of the truck, lowering the jack.
2016-12-03 20:46:43  ★ Dean Hawthorne walks with the jack to the back of the truck, placing it under the chasis.
2016-12-03 20:46:54  ★ Dean Hawthorne begins to lift up the truck, so the wheels are off the ground
2016-12-03 20:47:11  ★ Dean Hawthorne picks up his tire iron, as he begins to unbolt the lug nuts on the back right wheel.
2016-12-03 20:47:19  ★ Dean Hawthorne kneels down, picking up the tire and places it against the wall.
2016-12-03 20:47:37  ★ Dean Hawthorne walks to the left tire, using the tire iron to remove the lug nuts and brings it to the wall
2016-12-03 20:47:46  ★ Dean Hawthorne slides underneath the car
2016-12-03 20:48:20  ★ Dean Hawthorne reaches into his duffle, grabbing and 18 mm wrench and unbolts the left upper strut bolt.
2016-12-03 20:48:41  ★ Dean Hawthorne also removes the upperball joint nut, using an 18mm wrench.
2016-12-03 20:49:21  ★ Dean Hawthorne removes a hammer from his duffle, he bangs on the ball joint seperating it from the knuckle.
2016-12-03 20:49:37  ★ Dean Hawthorne places the hammer down, removing a 21mm wrench
2016-12-03 20:50:11  ★ Dean Hawthorne begin to use the wrench to unbolt the swaybar nut and bushings.
2016-12-03 20:50:34  ★ Dean Hawthorne using the wrench, he begins to remove the bolt from the bottom strut mount.
2016-12-03 20:50:52  ★ Dean Hawthorne places the hammer down as he removes a flat head, taking it into his hans.
2016-12-03 20:51:12  ★ Dean Hawthorne removes the bolt clips from the bottom of the strut, using a screw driber.
2016-12-03 20:51:14  Dean Hawthorne: (( driver ))
2016-12-03 20:51:38  ★ Dean Hawthorne places the strut spacer in on both struts, alligning it and securing it with 10mm bolts.
2016-12-03 20:52:29  ★ Dean Hawthorne removes a 10mm from his duffle, securing the 10mm bolts.
2016-12-03 20:53:03  ★ Dean Hawthorne drops his 10mm wrench, picking up the 18 and tightening the upper strut nut.
2016-12-03 20:53:07  ★ on both struts.      ((Dean Hawthorne))
2016-12-03 20:55:48  ★ Dean Hawthorne lowers the upper ball joint, and raises the upper control arm, connecting them with an 18mm
2016-12-03 20:55:50  Dean Hawthorne: (( bolt ))
2016-12-03 20:56:04  ★ Dean Hawthorne connects them via the 18mm wrench.
2016-12-03 20:57:17  ★ Dean Hawthorne using the wrench to re connect the swaybar bolt and bushing
2016-12-03 20:57:24  ★ lift DONNEEEEEEE FOLK BRO BRO GOD GNG SHIT FOLK      ((Dean Hawthorne))