Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Copyright (c) 1992-2016 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 11.0-RELEASE-p1 #0: Mon Oct 3 09:27:08 UTC 2016
- jason@zfsguru.com:/SHARED/obj/amd64/SHARED/sourcecode/sys/OFED-POLLING-ALTQ amd64
- FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM 3.8.0)
- VT(vga): resolution 640x480
- CPU: AMD Turion(tm) II Neo N40L Dual-Core Processor (1497.54-MHz K8-class CPU)
- Origin="AuthenticAMD" Id=0x100f63 Family=0x10 Model=0x6 Stepping=3
- Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
- Features2=0x802009<SSE3,MON,CX16,POPCNT>
- AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
- AMD Features2=0x837ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,NodeId>
- SVM: NP,NRIP,NAsids=64
- TSC: P-state invariant
- real memory = 17179869184 (16384 MB)
- avail memory = 16310865920 (15555 MB)
- Event timer "LAPIC" quality 400
- ACPI APIC Table: <HP ProLiant>
- FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
- FreeBSD/SMP: 1 package(s) x 2 core(s)
- random: unblocking device.
- ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20160527/tbfadt-650)
- ioapic0 <Version 2.1> irqs 0-23 on motherboard
- random: entropy device external interface
- kbd1 at kbdmux0
- netmap: loaded module
- module_register_init: MOD_LOAD (vesa, 0xffffffff8102c8d0, 0) error 19
- vtvga0: <VT VGA driver> on motherboard
- cryptosoft0: <software crypto> on motherboard
- acpi0: <HP ProLiant> on motherboard
- acpi0: Power Button (fixed)
- cpu0: <ACPI CPU> on acpi0
- cpu1: <ACPI CPU> on acpi0
- attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
- Timecounter "i8254" frequency 1193182 Hz quality 0
- Event timer "i8254" frequency 1193182 Hz quality 100
- atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
- Event timer "RTC" frequency 32768 Hz quality 0
- hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
- Timecounter "HPET" frequency 14318180 Hz quality 950
- Event timer "HPET" frequency 14318180 Hz quality 550
- Event timer "HPET1" frequency 14318180 Hz quality 450
- Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
- acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
- pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
- pcib0: _OSC returned error 0x10
- pci0: <ACPI PCI bus> on pcib0
- pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
- pci1: <ACPI PCI bus> on pcib1
- vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xd0000000-0xdfffffff,0xfe5f0000-0xfe5fffff,0xfe400000-0xfe4fffff irq 18 at device 5.0 on pci1
- vgapci0: Boot video device
- pcib2: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0
- pci2: <ACPI PCI bus> on pcib2
- mps0: <Avago Technologies (LSI) SAS2008> port 0xe000-0xe0ff mem 0xfe7f0000-0xfe7fffff,0xfe780000-0xfe7bffff irq 18 at device 0.0 on pci2
- mps0: Firmware: 20.00.07.00, Driver: 21.01.00.00-fbsd
- mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
- pcib3: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
- pci3: <ACPI PCI bus> on pcib3
- xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfe8fe000-0xfe8fffff irq 16 at device 0.0 on pci3
- xhci0: 64 bytes context size, 64-bit DMA
- xhci0: Unable to map MSI-X table
- usbus0 on xhci0
- pcib4: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0
- pci4: <ACPI PCI bus> on pcib4
- bge0: <HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100> mem 0xfe9f0000-0xfe9fffff irq 18 at device 0.0 on pci4
- bge0: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E
- miibus0: <MII bus> on bge0
- brgphy0: <BCM5784 10/100/1000baseT PHY> PHY 1 on miibus0
- brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
- bge0: Using defaults for TSO: 65518/35/2048
- bge0: Ethernet address: a0:b3:cc:e0:09:f5
- ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfe3ffc00-0xfe3fffff irq 19 at device 17.0 on pci0
- ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
- ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI>
- ahcich0: <AHCI channel> at channel 0 on ahci0
- ahcich1: <AHCI channel> at channel 1 on ahci0
- ahcich2: <AHCI channel> at channel 2 on ahci0
- ahcich3: <AHCI channel> at channel 3 on ahci0
- ahcich4: <AHCI channel> at channel 4 on ahci0
- ahcich5: <AHCI channel> at channel 5 on ahci0
- ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe3fe000-0xfe3fefff irq 18 at device 18.0 on pci0
- usbus1 on ohci0
- ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe3ff800-0xfe3ff8ff irq 17 at device 18.2 on pci0
- usbus2: EHCI version 1.0
- usbus2 on ehci0
- ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe3fd000-0xfe3fdfff irq 18 at device 19.0 on pci0
- usbus3 on ohci1
- ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe3ff400-0xfe3ff4ff irq 17 at device 19.2 on pci0
- usbus4: EHCI version 1.0
- usbus4 on ehci1
- isab0: <PCI-ISA bridge> at device 20.3 on pci0
- isa0: <ISA bus> on isab0
- pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0
- pci5: <ACPI PCI bus> on pcib5
- ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe3fc000-0xfe3fcfff irq 18 at device 22.0 on pci0
- usbus5 on ohci2
- ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe3ff000-0xfe3ff0ff irq 17 at device 22.2 on pci0
- usbus6: EHCI version 1.0
- usbus6 on ehci2
- acpi_button0: <Power Button> on acpi0
- ppc0: cannot reserve I/O port range
- hwpstate0: <Cool`n'Quiet 2.0> on cpu0
- ZFS filesystem version: 5
- ZFS storage pool version: features support (5000)
- Timecounters tick every 1.000 msec
- nvme cam probe device init
- usbus0: 5.0Gbps Super Speed USB v3.0
- usbus1: 12Mbps Full Speed USB v1.0
- usbus2: 480Mbps High Speed USB v2.0
- usbus3: 12Mbps Full Speed USB v1.0
- usbus4: 480Mbps High Speed USB v2.0
- usbus5: 12Mbps Full Speed USB v1.0
- usbus6: 480Mbps High Speed USB v2.0
- ugen0.1: <0x1912> at usbus0
- uhub0: <0x1912 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
- ugen1.1: <ATI> at usbus1
- uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
- ugen2.1: <ATI> at usbus2
- uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
- ugen3.1: <ATI> at usbus3
- uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
- ugen4.1: <ATI> at usbus4
- uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
- ugen5.1: <ATI> at usbus5
- uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
- ugen6.1: <ATI> at usbus6
- uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
- mps0: SAS Address for SATA device = d2644537dfc9ba74
- mps0: SAS Address for SATA device = d27a564b02e3bd76
- mps0: SAS Address for SATA device = d2644733d9c6bd6d
- mps0: SAS Address for SATA device = d2644738e0c5bc75
- mps0: SAS Address for SATA device = d26b4059fed8e173
- mps0: SAS Address for SATA device = d264433be0c3b76d
- mps0: SAS Address from SATA device = d2644537dfc9ba74
- mps0: SAS Address from SATA device = d27a564b02e3bd76
- mps0: SAS Address from SATA device = d2644733d9c6bd6d
- bge0: link state changed to DOWN
- mps0: SAS Address from SATA device = d2644738e0c5bc75
- mps0: SAS Address from SATA device = d26b4059fed8e173
- mps0: SAS Address from SATA device = d264433be0c3b76d
- uhub5: 4 ports with 4 removable, self powered
- uhub1: 5 ports with 5 removable, self powered
- uhub3: 5 ports with 5 removable, self powered
- uhub0: 4 ports with 4 removable, self powered
- uhub6: 4 ports with 4 removable, self powered
- uhub2: 5 ports with 5 removable, self powered
- uhub4: 5 ports with 5 removable, self powered
- ugen0.2: <StoreJet Transcend> at usbus0
- umass0: <StoreJet Transcend StoreJet Transcend, class 0/0, rev 3.00/80.00, addr 1> on usbus0
- umass0: SCSI over Bulk-Only; quirks = 0x0100
- umass0:7:0: Attached to scbus7
- bge0: link state changed to UP
- ugen3.2: <vendor 0x04f3> at usbus3
- ugen1.2: <vendor 0x1241> at usbus1
- ukbd0: <vendor 0x1241 USB Keyboard, class 0/0, rev 1.10/2.80, addr 2> on usbus1
- kbd2 at ukbd0
- ugen1.3: <INNO TECH> at usbus1
- (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
- (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
- (probe0:umass-sim0:0:0:0): Retrying command
- (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
- (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
- (probe0:umass-sim0:0:0:0): Retrying command
- ada0 at ahcich4 bus 0 scbus5 target 0 lun 0
- ada0: <OCZ-AGILITY4 1.5.2> ACS-2 ATA SATA 3.x device
- ada0: Serial Number OCZ-
- ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada0: Command Queueing enabled
- ada0: 122104MB (250069680 512 byte sectors)
- ada1 at ahcich5 bus 0 scbus6 target 0 lun 0
- ada1: <OCZ-AGILITY4 1.5.2> ACS-2 ATA SATA 3.x device
- ada1: Serial Number OCZ-
- ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada1: Command Queueing enabled
- ada1: 122104MB (250069680 512 byte sectors)
- (da0:mps0:0:2:0): UNMAPPED
- (da1:mps0:0:3:0): UNMAPPED
- da0 at mps0 bus 0 scbus0 target 2 lun 0
- da0: <ATA WDC WD30EFRX-68E 0A80> Fixed Direct Access SPC-4 SCSI device
- da0: Serial Number WD-
- da0: 600.000MB/s transfers
- da0: Command Queueing enabled
- da0: 2861588MB (5860533168 512 byte sectors)
- da0: quirks=0x8<4K>
- (da2:mps0:0:4:0): UNMAPPED
- da1 at mps0 bus 0 scbus0 target 3 lun 0
- da1: <ATA WDC WD30EFRX-68E 0A82> Fixed Direct Access SPC-4 SCSI device
- da1: Serial Number WD-
- da1: 600.000MB/s transfers
- da1: Command Queueing enabled
- da1: 2861588MB (5860533168 512 byte sectors)
- da1: quirks=0x8<4K>
- (da3:mps0:0:5:0): UNMAPPED
- da2 at mps0 bus 0 scbus0 target 4 lun 0
- da2: <ATA WDC WD30EFRX-68E 0A80> Fixed Direct Access SPC-4 SCSI device
- da2: Serial Number WD-
- da2: 600.000MB/s transfers
- da2: Command Queueing enabled
- da2: 2861588MB (5860533168 512 byte sectors)
- da2: quirks=0x8<4K>
- (da4:mps0:0:6:0): UNMAPPED
- da3 at mps0 bus 0 scbus0 target 5 lun 0
- da3: <ATA WDC WD30EFRX-68E 0A80> Fixed Direct Access SPC-4 SCSI device
- da3: Serial Number WD-
- da3: 600.000MB/s transfers
- da3: Command Queueing enabled
- da3: 2861588MB (5860533168 512 byte sectors)
- da3: quirks=0x8<4K>
- (da5:mps0:0:7:0): UNMAPPED
- da4 at mps0 bus 0 scbus0 target 6 lun 0
- da4: <ATA WDC WD30EFRX-68E 0A82> Fixed Direct Access SPC-4 SCSI device
- da4: Serial Number WD-
- da4: 600.000MB/s transfers
- da4: Command Queueing enabled
- da4: 2861588MB (5860533168 512 byte sectors)
- da4: quirks=0x8<4K>
- da5 at mps0 bus 0 scbus0 target 7 lun 0
- da5: <ATA WDC WD30EFRX-68E 0A80> Fixed Direct Access SPC-4 SCSI device
- da5: Serial Number WD-
- da5: 600.000MB/s transfers
- da5: Command Queueing enabled
- da5: 2861588MB (5860533168 512 byte sectors)
- da5: quirks=0x8<4K>
- da6 at umass-sim0 bus 0 scbus7 target 0 lun 0
- da6: <StoreJet Transcend 0> Fixed Direct Access SPC-4 SCSI device
- da6: Serial Number
- da6: 400.000MB/s transfers
- da6: 953869MB (1953525168 512 byte sectors)
- da6: quirks=0x2<NO_6_BYTE>
- SMP: AP CPU #1 Launched!
- Timecounter "TSC" frequency 1497539110 Hz quality 800
- Trying to mount root from zfs:OS/zfsguru/11.0.008 [rw]...
- bge0: link state changed to DOWN
- ums0: <vendor 0x04f3 PS2+USB Mouse, class 0/0, rev 1.10/22.90, addr 2> on usbus3
- ums0: 3 buttons and [XYZ] coordinates ID=0
- uhid0: <vendor 0x1241 USB Keyboard, class 0/0, rev 1.10/2.80, addr 2> on usbus1
- bge0: link state changed to UP
- info: [drm] Initialized drm 1.1.0 20060810
- drmn0: <ATI Mobility Radeon HD 4200> on vgapci0
- info: [drm] RADEON_IS_PCI
- info: [drm] initializing kernel modesetting (RS880 0x1002:0x9712 0x103C:0x1609).
- info: [drm] register mmio base: 0xFE5F0000
- info: [drm] register mmio size: 65536
- info: [drm] radeon_atrm_get_bios: ===> Try ATRM...
- info: [drm] radeon_atrm_get_bios: IGP card detected, skipping this method...
- info: [drm] radeon_acpi_vfct_bios: ===> Try VFCT...
- info: [drm] radeon_acpi_vfct_bios: Get "VFCT" ACPI table
- info: [drm] radeon_acpi_vfct_bios: Failed to get "VFCT" table: AE_NOT_FOUND
- info: [drm] igp_read_bios_from_vram: ===> Try IGP's VRAM...
- info: [drm] igp_read_bios_from_vram: VRAM base address: 0xd0000000
- info: [drm] igp_read_bios_from_vram: Map address: 0xfffff800d0000000 (262144 bytes)
- info: [drm] igp_read_bios_from_vram: Incorrect BIOS signature: 0xFFFF
- info: [drm] radeon_read_bios: ===> Try PCI Expansion ROM...
- info: [drm] radeon_read_bios: Map address: 0xfffff800000c0000 (131072 bytes)
- info: [drm] ATOM BIOS: AMD_1407_150
- drmn0: info: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
- drmn0: info: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
- info: [drm] Detected VRAM RAM=256M, BAR=256M
- info: [drm] RAM width 32bits DDR
- [TTM] Zone kernel: Available graphics memory: 8238896 kiB
- [TTM] Zone dma32: Available graphics memory: 2097152 kiB
- [TTM] Initializing pool allocator
- info: [drm] radeon: 256M of VRAM memory ready
- info: [drm] radeon: 512M of GTT memory ready.
- info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- info: [drm] Driver supports precise vblank timestamp query.
- info: [drm] radeon: irq initialized.
- info: [drm] GART: num cpu pages 131072, num gpu pages 131072
- info: [drm] Loading RS780 Microcode
- info: [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
- drmn0: info: WB enabled
- drmn0: info: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0x0xfffff800999c4c00
- drmn0: info: fence driver on ring 3 use gpu addr 0x00000000a0000c0c and cpu addr 0x0xfffff800999c4c0c
- info: [drm] ring test on 0 succeeded in 0 usecs
- info: [drm] ring test on 3 succeeded in 1 usecs
- info: [drm] ib test on ring 0 succeeded in 0 usecs
- info: [drm] ib test on ring 3 succeeded in 0 usecs
- info: [drm] radeon_device_init: Taking over the fictitious range 0xd0000000-0xe0000000
- iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
- iic0: <I2C generic I/O> on iicbus0
- iicbus1: <Philips I2C bus> on iicbb1 addr 0x0
- iic1: <I2C generic I/O> on iicbus1
- iicbus2: <Philips I2C bus> on iicbb2 addr 0x0
- iic2: <I2C generic I/O> on iicbus2
- iicbus3: <Philips I2C bus> on iicbb3 addr 0x0
- iic3: <I2C generic I/O> on iicbus3
- iicbus4: <Philips I2C bus> on iicbb4 addr 0x0
- iic4: <I2C generic I/O> on iicbus4
- info: [drm] Radeon Display Connectors
- info: [drm] Connector 0:
- info: [drm] VGA-1
- info: [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
- info: [drm] Encoders:
- info: [drm] CRT1: INTERNAL_KLDSCP_DAC1
- info: [drm] radeon: power management initialized
- info: [drm] Connector VGA-1: get mode from tunables:
- info: [drm] - kern.vt.fb.modes.VGA-1
- info: [drm] - kern.vt.fb.default_mode
- info: [drm] fb mappable at 0xD0142000
- info: [drm] vram apper at 0xD0000000
- info: [drm] size 5242880
- info: [drm] fb depth is 24
- info: [drm] pitch is 5120
- fbd0 on drmn0
- VT: Replacing driver "vga" with new "fb".
- info: [drm] Initialized radeon 2.29.0 20080528 for drmn0 on minor 0
- amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement