Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- flash_start=0xb0000000
- flash_size=4194304l
- CPU revision is: 0001906c
- Primary instruction cache 8kB, physically tagged, 4-way, linesize 16 bytes.
- Primary data cache 8kB, 2-way, linesize 16 bytes.
- Linux version 2.4.31-Amazon_SE-3.6.12-R0208V36 (uday@rdfwdev1.aztech.com) (gcc version 3.3.6) #107 Thu Jan 24 13:38:12 SGT 2013
- Can't analyze prologue code at 8001e2a0
- Determined physical RAM map:
- User-defined physical RAM map:
- memory: 01000000 @ 00000000 (usable)
- On node 0 totalpages: 4096
- zone(0): 4096 pages.
- zone(1): 0 pages.
- zone(2): 0 pages.
- Kernel command line: root=/dev/mtdblock1 ip=192.168.1.1:192.168.1.2::::eth0:on console=ttyS0,115200 ethaddr=00:0F:C9:10:85:A6 mem=16M panic=1
- ethaddr_setup: mac address 0- f-c9-10-85-a6
- mips_hpt_frequency:133333333
- r4k_offset: 00145855(1333333)
- Using 133.333 MHz high precision timer.
- [ifx_asc_init_hardware 1081]: ASC ID = 0x101044c4
- [ifx_asc_init_hardware 1083]: TxFIFO size = 16, RxFIFO size = 16
- [ifx_asc_init_hardware 1085]: TxFIFO CON = 0x1f01, RxFIFO CON = 0x1f01
- Calibrating delay loop...
- MIPS CPU counter frequency is fixed at 133333333 Hz
- Memory: 14268k/16384k available (1619k kernel code, 2116k reserved, 100k data, 80k init, 0k highmem)
- Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
- Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
- Mount cache hash table entries: 512 (order: 0, 4096 bytes)
- Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
- Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
- Checking for 'wait' instruction... unavailable.
- POSIX conformance testing by UNIFIX
- Linux NET4.0 for Linux 2.4
- Based upon Swansea University Computer Society NET3.039
- Initializing RT netlink socket
- amazon_se_dma_init
- dma_chip_init
- LSP Revision 1
- Starting kswapd
- Squashfs 2.2 (released 2005/07/03) (C) 2002-2004, 2005 Phillip Lougher
- pty: 256 Unix98 ptys configured
- ttyS0 at MEM 0xbe100c00 (irq = 66) is a IFX_ASC
- Amazon_SE MEI version:2.04.00
- cgu: misc_register on minor = 63
- amazon_se_gptu_init:<6>gptu: totally 6 16-bit timers/counters
- gptu: misc_register on minor 62
- gptu: succeeded to request irq 25
- gptu: succeeded to request irq 26
- gptu: succeeded to request irq 27
- gptu: succeeded to request irq 28
- gptu: succeeded to request irq 29
- gptu: succeeded to request irq 30
- cgu_get_fpi_bus_clock(2) = 133333333, clock_divider = 1
- bus clock = 5000000, clock_divider = 1
- divider = 33333332
- set_timer(0, 4000), divider = 33333332
- request_timer(0, 0x0000010D, 33333332)
- reload value = 33333332
- led: misc_register on minor = 151
- Infineon CPE API Driver version: DSL CPE API V3.16.5
- PPP generic driver version 2.4.2
- amazon_se ETOP driver loaded!
- Internal Clock
- Selected EPHY_MODE
- oamk: init_module() called.
- Opening oam kernel socket
- oamk: init_module() returned.
- ppe: ATM init succeeded (firmware version 1.1.0.2.1.13)
- [init_amazon_se_mtd 371]: AMAZON_SE_EBU_CON 0x40000060, AMAZON_SE_EBU_CON0 0x1d2aa
- init_amazon_se_mtd: start_scan_addr: b0000000
- init_amazon_se_mtd: chip probing count 0
- Amazon_se: probing address:b0000000
- Amd/Fujitsu Extended Query Table v1.1 at 0x0040
- number of CFI chips: 1
- cfi_cmdset_0002: Disabling fast programming due to code brokenness.
- init_amazon_se_mtd: bank1, name:Amazon_se Bank 0, size:4194304bytes
- AMAZON_SE flash0: Using static image partition definition
- Creating 2 MTD partitions on "Amazon_se Bank 0":
- 0x00000000-0x00010000 : "U-Boot"
- 0x00010000-0x00400000 : "RootFS,Kernel,Data,Environment"
- NET4: Linux TCP/IP 1.0 for NET4.0
- IP Protocols: ICMP, UDP, TCP, IGMP
- IP: routing cache hash table of 512 buckets, 4Kbytes
- TCP: Hash tables configured (established 1024 bind 2048)
- GRE over IPv4 tunneling driver
- Linux IP multicast router 0.06 plus PIM-SM
- ip_conntrack version 2.1 (128 buckets, 1024 max) - 360 bytes per conntrack
- ip_conntrack_pptp version 1.9 loaded
- ip_conntrack_rtsp v0.01 loading
- ip_nat_pptp version 1.5 loaded
- ip_nat_rtsp v0.01 loading
- ip_tables: (C) 2000-2002 Netfilter core team
- ipt_time loading
- NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
- NET4: Ethernet Bridge 008 for NET4.0
- Amazon_Se Port Initialization
- VFS: Mounted root (squashfs filesystem) readonly.
- Freeing unused kernel memory: 80k freed
- Algorithmics/MIPS FPU Emulator v1.5
- Modem is not ready!<6>device eth0 entered promiscuous mode
- br0: port 1(eth0) entering learning state
- br0: port 1(eth0) entering forwarding state
- br0: topology change detected, propagating
- open ATM itf = 0, vpi = 1, vci = 32, ret = 0
- device nas0 entered promiscuous mode
- br0: port 2(nas0) entering learning state
- br0: port 2(nas0) entering forwarding state
- br0: topology change detected, propagating
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement