Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 5.43 2012-06-30 r3573 [i686-linux-3.5.0-27-generic] (local build)
- Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Model Family: Fujitsu MJA BH
- Device Model: FUJITSU MJA2250BH G2
- Serial Number: K96QTA22AK2H
- LU WWN Device Id: 5 00000e 044498b70
- Firmware Version: 0084001C
- User Capacity: 250,059,350,016 bytes [250 GB]
- Sector Size: 512 bytes logical/physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: 8
- ATA Standard is: ATA-8-ACS revision 3f
- Local Time is: Wed Apr 17 22:58:41 2013 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 121) The previous self-test completed having
- the read element of the test failed.
- Total time to complete Offline
- data collection: ( 783) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 111) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000f 100 051 046 Pre-fail Always - 186986
- 2 Throughput_Performance 0x0005 100 100 030 Pre-fail Offline - 34537472
- 3 Spin_Up_Time 0x0003 100 100 025 Pre-fail Always - 0
- 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 3109
- 5 Reallocated_Sector_Ct 0x0033 100 100 024 Pre-fail Always - 1 (1999 1)
- 7 Seek_Error_Rate 0x000f 100 100 047 Pre-fail Always - 2879
- 8 Seek_Time_Performance 0x0005 100 100 019 Pre-fail Offline - 0
- 9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 5261
- 10 Spin_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3109
- 192 Power-Off_Retract_Count 0x0032 098 098 000 Old_age Always - 506
- 193 Load_Cycle_Count 0x0032 098 098 000 Old_age Always - 44002
- 194 Temperature_Celsius 0x0022 100 055 000 Old_age Always - 50 (Min/Max 11/69)
- 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 44364
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 1 (3 15089)
- 197 Current_Pending_Sector 0x0012 001 001 000 Old_age Always - 256
- 198 Offline_Uncorrectable 0x0010 001 001 000 Old_age Offline - 283
- 199 UDMA_CRC_Error_Count 0x003e 200 253 000 Old_age Always - 0
- 200 Multi_Zone_Error_Rate 0x000f 100 100 060 Pre-fail Always - 31884
- 203 Run_Out_Cancel 0x0002 100 100 000 Old_age Always - 429563576730
- 240 Head_Flying_Hours 0x003e 200 200 000 Old_age Always - 0
- SMART Error Log Version: 1
- ATA Error Count: 2314 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 2314 occurred at disk power-on lifetime: 5261 hours (219 days + 5 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 41 03 02 c7 52 40 Error: UNC at LBA = 0x0052c702 = 5424898
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 08 00 00 c7 52 40 08 03:44:04.865 READ FPDMA QUEUED
- 60 08 00 f8 c6 52 40 08 03:44:03.777 READ FPDMA QUEUED
- 60 08 00 f0 c6 52 40 08 03:44:03.776 READ FPDMA QUEUED
- 60 08 00 e8 c6 52 40 08 03:44:03.755 READ FPDMA QUEUED
- 60 08 00 e0 c6 52 40 08 03:44:03.755 READ FPDMA QUEUED
- Error 2313 occurred at disk power-on lifetime: 5261 hours (219 days + 5 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 41 03 ca 7f 52 40 Error: UNC at LBA = 0x00527fca = 5406666
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 08 00 c8 7f 52 40 08 03:43:51.774 READ FPDMA QUEUED
- 60 08 00 c0 7f 52 40 08 03:43:47.629 READ FPDMA QUEUED
- 60 08 00 b8 7f 52 40 08 03:43:47.451 READ FPDMA QUEUED
- 60 08 00 b0 7f 52 40 08 03:43:46.162 READ FPDMA QUEUED
- 60 08 00 a8 7f 52 40 08 03:43:45.607 READ FPDMA QUEUED
- Error 2312 occurred at disk power-on lifetime: 5261 hours (219 days + 5 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 41 03 a2 7f 52 40 Error: UNC at LBA = 0x00527fa2 = 5406626
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 08 00 a0 7f 52 40 08 03:43:41.272 READ FPDMA QUEUED
- 60 08 00 98 7f 52 40 08 03:43:40.407 READ FPDMA QUEUED
- ef 10 02 00 00 00 a0 08 03:43:40.405 SET FEATURES [Reserved for Serial ATA]
- 27 00 00 00 00 00 e0 08 03:43:40.405 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 a0 08 03:43:40.403 IDENTIFY DEVICE
- Error 2311 occurred at disk power-on lifetime: 5261 hours (219 days + 5 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 41 03 94 7f 52 40 Error: UNC at LBA = 0x00527f94 = 5406612
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 08 00 90 7f 52 40 08 03:43:33.415 READ FPDMA QUEUED
- 60 08 00 88 7f 52 40 08 03:43:31.415 READ FPDMA QUEUED
- 60 08 00 80 7f 52 40 08 03:43:30.538 READ FPDMA QUEUED
- ef 10 02 00 00 00 a0 08 03:43:30.537 SET FEATURES [Reserved for Serial ATA]
- 27 00 00 00 00 00 e0 08 03:43:30.537 READ NATIVE MAX ADDRESS EXT
- Error 2310 occurred at disk power-on lifetime: 5261 hours (219 days + 5 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 41 03 7a 7f 52 40 Error: UNC at LBA = 0x00527f7a = 5406586
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 08 00 78 7f 52 40 08 03:43:26.102 READ FPDMA QUEUED
- 60 08 00 70 7f 52 40 08 03:43:25.547 READ FPDMA QUEUED
- 60 08 00 68 7f 52 40 08 03:43:22.281 READ FPDMA QUEUED
- ef 10 02 00 00 00 a0 08 03:43:22.280 SET FEATURES [Reserved for Serial ATA]
- 27 00 00 00 00 00 e0 08 03:43:22.280 READ NATIVE MAX ADDRESS EXT
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed: read failure 90% 5261 89292706
- # 2 Short offline Completed: read failure 90% 5261 89292692
- # 3 Extended offline Completed: read failure 90% 5261 89292692
- # 4 Short offline Completed: read failure 90% 5261 89292692
- # 5 Extended offline Completed: read failure 90% 5259 85359375
- # 6 Short offline Completed: read failure 90% 5259 85359375
- # 7 Short offline Completed: read failure 90% 5259 85359375
- # 8 Short offline Completed: read failure 90% 5259 85359375
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement