Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- -- Danube Primary loader --
- Version : 4.1.24.52.12
- Build Profile : sx76x_danube_a
- Build Date : Jun 10 2009 - 17:11:31
- --> Extract primary loader [ OK ]
- --> Validate secondary loader (FLASH) [ OK ]
- -- Danube Secondary loader --
- Version : 4.1.28.52.12
- Build Profile : sx76x_danube_b
- Build Date : Dec 15 2009 - 17:54:55
- --> Extract secondary loader [ OK ]
- --> Press enter to activate cli [ 00 ]
- --> Validate runtime image (FLASH) [ OK ]
- --> Extracting runtime [ OK ]
- Starting...
- memsize=32
- flash_start=0xb0000000
- flash_size=8388608 (0x800000)
- reset_sregs(rcu_stat,rcu_stat_sr)=0x20260008,0x20267FFC
- hwmem_size=0x02000000
- free_end=0x01f00000
- Will reserve 0x0000e000-0x00010000 : "nvram"
- 0x00700000-0x00720000 : "oops"
- mtdoops: Attached to MTD device 4
- Initializing Cryptographic API
- Infineon DEU initialization.
- deu_init(): calling ifxdeu_init_aes()
- ifxdeu initialize!
- Using Infineon DEU for AES algorithm (multiblock).
- deu_init(): calling ifxdeu_init_md5()
- Using Infineon DEU for MD5 algorithm (multiblock).
- ifxdeu nitialized OK. Device Major : 247
- NET4: Linux TCP/IP 1.0 for NET4.0
- IP Protocols: ICMP, UDP, TCP, IGMP
- IP: routing cache hash table of 512 buckets, 4Kbytes
- TCP: Hash tables configured (established 2048 bind 4096)
- Linux IP multicast router 0.06 plus PIM-SM
- Netfilter messages via NETLINK v0.12.
- ip_conntrack version 2.1 (248 buckets, 1984 max) - 664 bytes per conntrack
- ip_conntrack_pptp version 1.9 loaded
- ip_conntrack_rtsp v0.01 loading
- ip_nat_pptp version 1.5 loaded
- ip_nat_rtsp v0.01 loading
- ip_tables: (C) 2000-2002 Netfilter core team
- netfilter PSD loaded - (c) astaro AG
- NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
- NET4: Ethernet Bridge 008 for NET4.0
- 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
- All bugs added by David S. Miller <davem@redhat.com>
- Danube Port Initialization
- DANUBE MIPS24KEc MPS mailbox driver, Version 1.1.0
- (c) Copyright 2006, Infineon Technologies AG
- DANUBE_RCU_RST_REQ = 0x10000008
- ifx_mps_reset ready
- IFX_MPS: using proc fs
- VFS: Mounted root (squashfs filesystem) readonly.
- Mounted devfs on /dev
- init started: BusyBox v1.00 (2009.12.15-16:52+0000) multi-call binary
- Starting pid 14, console /dev/ttyS1: '/etc/init.d/rcS'
- Algorithmics/MIPS FPU Emulator v1.5
- mknod: /dev/usb/lp0: No such file or directory
- Using /lib/modules/2.4.31-danube-3.0.5.4-shc-bas83/kernel/drivers/net/admmod.o
- Loading ADM6996 driver...
- 6996I SMI Mode-Chip ID:71023
- Using /lib/modules/2.4.31-danube-3.0.5.4-shc-bas83/hwinfodrv.o
- Warning: lHWINFO: init_hwinfo_module:Got major 244
- HWINFO: init_hwinfo_module:OK
- oading hwinfodrv will taint the kernel: no license
- See http://www.tux.org/lkml/#export-tainted for information about tainted modules
- Using /lib/modules/2.4.31-danube-3.0.5.4-shc-bas83/duslic.o
- @(#)DUSLIC Driver, Version 0.0.2
- (c) Copyright 2004, Infineon Technologies AG
- Using /lib/modules/2.4.31-danube-3.0.5.4-shc-bas83/danube_daa.o
- Warning: loading danube_daa will taint the ker@(#)CPC5621 Driver, Version 0.3.1.1
- (c) Copyright 2004, Infineon Technologies AG
- nel: no license
- See http://www.tux.org/lkml/#export-tainted for information about tainted modules
- Using /lib/modules/2.4.31-danube-3.0.5.4-shc-bas83/drv_tapi.o
- IFX TAPI, version 3.5.2.5, (c) 2007 Infineon Technologies
- Using /lib/modules/2.4.31-danube-3.0.5.4-shc-bas83/drv_vmmc.o
- IFX VMMC device driver, version 1.1.6.5, (c) 2007 Infineon Technologies AG
- Using /lib/modules/2.4.31-danube-3.0.5.4-shc-bas83/m::SipAlgComponentManager created
- Jan 1 00:00:06 Inf <EVENT> scm: 065-00-00 scm::EthernetSwitchADM6996ComponentManager created
- Jan 1 00:00:06 Inf <EVJan 1 00:00:14 Inf <EVENT> scm: 000-00-00 ioctl error, failed to get hw address for iface(ath-1).
- Jan 1 00:00:14 Inf <EVENT> scm: 000-00-00 ioctl error, failed to get hw address for iface(ath-1).
- Jan 1 00:00:14 Inf <EVENT> scm: 000-00-00 ioctl error, failed to get hw address for iface(ath-1).
- Jan 1 00:00:14 Inf <EVENT> scm: 000-00-00 ioctl error, failed to get hw address for iface(ath-1).
- Jan 1 00:00:17 Inf <EVENT> scm: 000-00-00 UPnP: upnp_param_changed_callback==NULL
- Jan 1 00:00:17 Inf <EVENT> scm: 000-00-00 UPnP: upnp_param_changed_callback==NULL
- Jan 1 00:00:17 Inf <EVENT> scm: 000-00-00 UPnP: upnp_param_changed_callback==NULL
- Jan 1 00:00:17 Inf <EVENT> scm: 017-00-00 Configuring services with settings from /config/system_configfile_f
- Jan 1 00:00:17 Inf <EVENT> scm: 017-00-00 Configuring services with settings from /config/system_configfile_r
- Jan 1 00:00:17 Inf <EVENT> scm: 017-00-00 Provisioning mode = Dormant
- Jan 1 00:00:17 Inf <EVENT> scm: 017-00-00 Provisioning complete
- Jan 1 00:00:18 Inf <EVENT> scm: 014-00-00 Start component 26 (LOGGING)
- om_cpe: local log enabled (fd=8)
- om_cpe: console log enabled (fd=9)
- om_cpe: local log enabled (fd=10)
- om_cpe: console log enabled (fd=11)
- om_cpe: local log enabled (fd=12)
- om_cpe: console log enabled (fd=13)
- om_cpe: local log enabled (fd=14)
- om_cpe: console log enabled (fd=15)
- om_cpe: local log enabled (fd=16)
- om_cpe: console log enabled (fd=17)
- Jan 1 00:00:20 War <EVENT> kernel: Porta WLAN EEPROM driver: v0.3
- Jan 1 00:00:20 War <EVENT> kernel: -> wlan_eesim_write 0x0 4096
- Jan 1 00:00:20 War <EVENT> kernel: wlan_eesim_write ok
- Jan 1 00:00:20 War <EVENT> kernel: Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
- Jan 1 00:00:20 War <EVENT> kernel: Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved
- Jan 1 00:00:21 War <EVENT> kernel: wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
- Jan 1 00:00:21 War <EVENT> kernel: wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
- Jan 1 00:00:21 War <EVENT> kernel: wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
- Jan 1 00:00:21 War <EVENT> kernel: wifi0: mac 7.9 phy 4.5 radio 5.6
- Jan 1 00:00:21 War <EVENT> kernel: wifi0: Use hw queue 1 for WME_AC_BE traffic
- Jan 1 00:00:21 War <EVENT> kernel: wifi0: Use hw queue 0 for WME_AC_BK traffic
- Jan 1 00:00:21 War <EVENT> kernel: wifi0: Use hw queue 2 for WME_AC_VI traffic
- Jan 1 00:00:21 War <EVENT> kernel: wifi0: Use hw queue 3 for WME_AC_VO traffic
- Jan 1 00:00:21 War <EVENT> kernel: wifi0: Use hw queue 8 for CAB traffic
- Jan 1 00:00:21 War <EVENT> kernel: wifi0: Use hw queue 9 for beacons
- Jan 1 00:00:22 War <EVENT> scm: 033-01-00 DhcpComponentManager state==idle (ignore event)
- Jan 1 00:00:23 War <EVENT> scm: 033-01-00 DhcpComponentManager state==idle (ignore event)
- Jan 1 00:00:23 War <EVENT> scm: 033-01-00 DhcpComponentManager state==idle (ignore event)
- Jan 1 00:00:23 War <EVENT> scm: 033-01-00 DhcpComponentManager state==idle (ignore event)
- Jan 1 00:00:24 War <EVENT> scm: 033-01-00 DhcpComponentManager state==idle (ignore event)
- Jan 1 00:00:24 War <EVENT> scm: 033-01-00 DhcpComponentManager state==idle (ignore event)
- Jan 1 00:00:24 War <EVENT> scm: 033-01-00 DhcpComponentManager state==idle (ignore event)
- Jan 1 00:00:25 War <EVENT> scm: 033-01-00 DhcpComponentManager state==idle (ignore event)
- Jan 1 00:00:25 War <EVENT> scm: 032-03-00 DnsComponentManager:processChildEvent ignoring event while not started
- Jan 1 00:00:25 War <EVENT> kernel: eth0.100: Setting MAC address to 00 21 04 9e 16 30.
- Jan 1 00:00:25 War <EVENT> kernel: VLAN (eth0.100): Setting underlying device (eth0) to promiscious mode.
- Jan 1 00:00:25 War <EVENT> scm: 032-03-00 DnsComponentManager:processChildEvent ignoring event while not started
- Jan 1 00:00:25 War <EVENT> scm: 032-03-00 DnsComponentManager:processChildEvent ignoring event while not started
- Jan 1 00:00:25 War <EVENT> scm: 032-03-00 DnsComponentManager:processChildEvent ignoring event while not started
- Jan 1 00:00:25 War <EVENT> scm: 032-03-00 DnsComponentManager:processChildEvent ignoring event while not started
- Jan 1 00:00:25 War <EVENT> scm: 032-03-00 DnsComponentManager:processChildEvent ignoring event while not started
- Jan 1 00:00:25 War <EVENT> scm: 032-03-00 DnsComponentManager:processChildEvent ignoring event while not started
- Jan 1 00:00:25 Err <EVENT> scm: 017-00-00 Received EV_NET_IPSTATUS broadcast: [eth0.100]
- om_cpe: local log enabled (fd=8)
- om_cpe: console log enabled (fd=9)
- om_cpe: local log enabled (fd=10)
- om_cpe: console log enabled (fd=11)
- om_cpe: local log enabled (fd=12)
- om_cpe: console log enabled (fd=13)
- om_cpe: local log enabled (fd=14)
- om_cpe: console log enabled (fd=15)
- om_cpe: local log enabled (fd=16)
- om_cpe: console log enabled (fd=17)
- Jan 1 00:00:27 War <EVENT> scm: 033-01-00 DhcpComponentManager state==idle (ig
- Jan 1 00:00:27 War <EVENT> scm: 032-03-00 DnsComponentManager:processChildEven
- Jan 1 00:00:27 Err <EVENT> scm: 086-00-00 PortTriggering received EV_NET_IPSTA
- Jan 1 00:00:27 Err <EVENT> scm: 086-00-00 PortTriggering add NAT rule: 192.168
- Jan 1 00:00:27 War <EVENT> scm: 032-03-00 DnsComponentManager:processChildEven
- om_cpe: local log enabled (fd=8)
- om_cpe: console log enabled (fd=9)
- om_cpe: local log enabled (fd=10)
- om_cpe: console log enabled (fd=11)
- om_cpe: local log enabled (fd=12)
- om_cpe: console log enabled (fd=13)
- om_cpe: local log enabled (fd=14)
- om_cpe: console log enabled (fd=15)
- om_cpe: local log enabled (fd=16)
- om_cpe: console log enabled (fd=17)
- Jan 1 00:00:28 War <EVENT> scm: 033-01-00 DhcpComponentManager state==idle (ig
- Jan 1 00:00:28 War <EVENT> scm: 032-03-00 DnsComponentManager:processChildEven
- Jan 1 00:00:31 Err <EVENT> scm: 086-00-00 PortTriggering received EV_NET_IPSTA
- Jan 1 00:00:31 Err <EVENT> scm: 077-00-00 No response received from iptFix
- Jan 1 00:00:31 Err <EVENT> scm: 077-00-00 cmd[/bin/iptables -D FORWARD -d 224.
- Jan 1 00:00:43 Err <EVENT> scm: 077-00-00 cmd[/bin/iptables -A Access -p $(sh /config/ipp.sh) -m limit --limit 20/minute --limit-burst 9 -j LOG --log-prefix "access control violation: "] failed with err[512]
- Jan 1 00:00:53 Err <EVENT> scm: 077-00-00 cmd[/bin/iptables -A Access -p $(sh /config/ipp.sh) -j DROP] failed with err[512]
- Jan 1 00:00:53 Err <EVENT> scm: 077-00-00 cmd[/bin/iptables -D FORWARD -d 224.0.0.0/4 -j ACCEPT] failed with err[256]
- Jan 1 00:00:53 War <EVENT> scm: 080-01-00 IPTVCm: processChildEvent state==Idle (ignore event)
- Jan 1 01:00:54 Err <EVENT> kernel: devfs_mk_dir(usb): using old entry in dir: 810686c0 ""
- Jan 1 01:00:55 War <EVENT> kernel:
- Jan 1 01:00:55 War <EVENT> kernel:
- Jan 1 01:00:55 War <EVENT> kernel:
- Jan 1 01:00:55 War <EVENT> kernel:
- Jan 1 01:00:55 War <EVENT> kernel: dwc_otg proc initialization okay!
- Jan 1 01:00:56 War <EVENT> kernel: UFSD version 6.15 (Nov 20 2008, 13:57:13)
- Jan 1 01:00:56 War <EVENT> kernel: NTFS read/write support included
- Jan 1 01:00:56 War <EVENT> kernel: Big endian platform
- Jan 1 01:00:56 War <EVENT> kernel: $Id: ufsdvfs.c,v 1.185 2008/11/19 13:42:16 shura Exp $
- Jan 1 01:00:59 War <EVENT> scm: 070-00-00 UPnP: Service is disabled.
- Jan 1 01:00:59 War <EVENT> kernel: ifx_mps_init_gpt_danube()...
- Jan 1 01:00:59 War <EVENT> kernel: ifx_mps_download_firmware()...
- Jan 1 01:00:59 War <EVENT> kernel: DANUBE_RCU_RST_REQ = 0x10000008
- Jan 1 01:00:59 War <EVENT> kernel: ifx_mps_reset ready
- Jan 1 01:00:59 War <EVENT> kernel: ifx_mps_gptc_config_danube()...
- Jan 1 01:00:59 War <EVENT> kernel: ifx_mps_gptc_config_danube() applying GPTC bugfix...
- Jan 1 01:00:59 War <EVENT> kernel: ifx_mps_gptc_config_danube() - calibration done, waited 75 loops!
- Jan 1 01:00:59 War <EVENT> kernel: ok!
- Jan 1 01:00:59 War <EVENT> kernel: Version 11.1.0 up and running...
- Jan 1 01:01:00 Err <EVENT> scm: 050-00-02 not a classification : begin(6)!=IGD.QueueManagement.Classification.
- Jan 1 01:01:00 Err <EVENT> scm: 050-00-02 not a classification : begin()!=IGD.QueueManagement.Classification.
- Jan 1 01:01:01 Err <EVENT> scm: 050-00-02 not a classification : begin()!=IGD.QueueManagement.Classification.
- Jan 1 01:01:01 Err <EVENT> scm: 050-00-02 not a classification : begin()!=IGD.QueueManagement.Classification.
- Jan 1 01:01:01 Err <EVENT> scm: 050-00-02 not a classification : begin(5)!=IGD.QueueManagement.Classification.
- Jan 1 01:01:01 Err <EVENT> scm: 050-00-02 not a classification : begin(4)!=IGD.QueueManagement.Classification.
- Jan 1 01:01:01 Err <EVENT> scm: 050-00-02 not a classification : begin(3)!=IGD.QueueManagement.Classification.
- Jan 1 01:01:01 Err <EVENT> scm: 050-00-02 not a classification : begin(6)!=IGD.QueueManagement.Classification.
- Jan 1 01:01:01 Err <EVENT> scm: 050-00-02 not a classification : begin(5)!=IGD.QueueManagement.Classification.
- Jan 1 01:01:01 Err <EVENT> scm: 050-00-02 not a classification : begin(4)!=IGD.QueueManagement.Classification.
- Jan 1 01:01:01 Err <EVENT> scm: 050-00-02 not a classification : begin(3)!=IGD.QueueManagement.Classification.
- Jan 1 01:01:01 Err <EVENT> scm: 050-00-02 not a classification : begin()!=IGD.QueueManagement.Classification.
- Jan 1 01:01:01 Err <EVENT> scm: 050-00-02 not a classification : begin()!=IGD.QueueManagement.Classification.
- Jan 1 01:01:01 Err <EVENT> scm: 050-00-02 not a classification : begin()!=IGD.QueueManagement.Classification.
- Jan 1 01:01:01 Err <EVENT> scm: 086-00-00 PortTriggering received EV_NET_IPSTATUS
- Jan 1 01:01:01 Err <EVENT> scm: 086-00-00 PortTriggering add NAT rule: 192.168.1.180
- Jan 1 01:01:01 Err <EVENT> scm: 077-00-00 cmd[/bin/iptables -t nat -D PREROUTING -d 192.168.1.180 -j TRIGGER --trigger-type dnat] failed with err[256]
- Jan 1 01:01:02 War <EVENT> scm: 103-00-00 rtpsd::Captured a packet that was not an IP-packet.
- Jan 1 01:01:02 War <EVENT> scm: 103-00-00 rtpsd::Captured a packet that was not an IP-packet.
- Jan 1 01:01:02 War <EVENT> scm: 103-00-00 rtpsd::Captured a packet that was not an IP-packet.
- Jan 1 01:01:02 War <EVENT> scm: 103-00-00 rtpsd::Captured a packet that was not an IP-packet.
- Jan 1 01:01:02 War <EVENT> scm: 083-00-00 Unable to synchronize.
- kernel: Got MODEM_READY_MSG kernel:
- Sep 29 18:51:36 War <EVENT> scm: 103-00-00 rtpsd::Ignoring packet that is not going out or coming in
- Sep 29 18:51:36 War <EVENT> scm: 103-00-00 rtpsd::Ignoring packet that is not going out or coming in
- Sep 29 18:51:36 War <EVENT> scm: 103-00-00 rtpsd::Ignoring packet that is not going out or coming in
- Sep 29 18:51:37 War <EVENT> scm: 103-00-00 rtpsd::Ignoring packet that is not going out or coming in
- Sep 29 18:51:37 War <EVENT> scm: 103-00-00 rtpsd::Ignoring packet that is not going out or coming in
- Sep 29 18:51:37 War <EVENT> scm: 103-00-00 rtpsd::Ignoring packet that is not going out or coming in
- Sep 29 18:51:37 War <EVENT> scm: 103-00-00 rtpsd::Ignoring packet that is not going out or coming in
- Starting pid 104, console /dev/ttyS1: '/bin/login'
- sx763 login: root
- Password:
- BusyBox v1.00 (2009.12.15-16:52+0000) Built-in shell (ash)
- Enter 'help' for a list of built-in commands.
- ~ # reboot
- The system is going down NOW !!
- Sending SIGTERM to all processes.
- Sep 29 18:53:21 War <EVENT> kernel: wdt_ioctl:disable watch dog timer
- Sep 29 18:53:21 War <EVENT> kernel: wdt_release:wdt_release
- Sep 29 18:53:21 Err <EVENT> syslogd: exiting on signal 1
- Please stand by while rebooting the system.
- Restarting system.
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- -- Danube Primary loader --
- Version : 4.1.24.52.12
- Build Profile : sx76x_danube_a
- Build Date : Jun 10 2009 - 17:11:31
- --> Extract primary loader [ OK ]
- --> Validate secondary loader (FLASH) [ OK ]
- -- Danube Secondary loader --
- Version : 4.1.28.52.12
- Build Profile : sx76x_danube_b
- Build Date : Dec 15 2009 - 17:54:55
- --> Extract secondary loader [ OK ]
- --> Press enter to activate cli [ 00 ]
- --> Validate runtime image (FLASH) [ OK ]
- --> Extracting runtime [ OK ]
- Starting...
- memsize=32
- flash_start=0xb0000000
- flash_size=8388608 (0x800000)
- reset_sregs(rcu_stat,rcu_stat_sr)=0x20260008,0x20267FFC
- hwmem_size=0x02000000
- free_end=0x01f00000
- Will reserve m
- 0x0000e000-0x00010000 : "nvram"
- 0x00700000-0x00720000 : "oops"
- mtdoops: Attached to MTD device 4
- Initializing Cryptographic API
- Infineon DEU initialization.
- deu_init(): calling ifxdeu_init_aes()
- ifxdeu initialize!
- Using Infineon DEU for AES algorithm (multiblock).
- deu_init(): calling ifxdeu_init_md5()
- Using Infineon DEU for MD5 algorithm (multiblock).
- ifxdeu nitialized OK. Device Major : 247
- NET4: Linux TCP/IP 1.0 for NET4.0
- IP Protocols: ICMP, UDP, TCP, IGMP
- IP: routing cache hash table of 512 buckets, 4Kbytes
- TCP: Hash tables configured (established 2048 bind 4096)
- Linux IP multicast router 0.06 plus PIM-SM
- Netfilter messages via NETLINK v0.12.
- ip_conntrack version 2.1 (248 buckets, 1984 max) - 664 bytes per conntrack
- ip_conntrack_pptp version 1.9 loaded
- ip_conntrack_rtsp v0.01 loading
- ip_nat_pptp version 1.5 loaded
- ip_nat_rtsp v0.01 loading
- ip_tables: (C) 2000-2002 Netfilter core team
- netfilter PSD loaded - (c) astaro AG
- NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
- NET4: Ethernet Bridge 008 for NET4.0
- 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
- All bugs added by David S. Miller <davem@redhat.com>
- Danube Port Initialization
- DANUBE MIPS24KEc MPS mailbox driver, Version 1.1.0
- (c) Copyright 2006, Infineon Technologies AG
- DANUBE_RCU_RST_REQ = 0x10000008
- ifx_mps_reset ready
- IFX_MPS: using proc fs
- VFS: Mounted root (squashfs filesystem) readonly.
- Mounted devfs on /dev
- init started: BusyBox v1.00 (2009.12.15-16:52+0000) multi-call binary
- Starting pid 14, console /dev/ttyS1: '/etc/init.d/rcS'
- Algorithmics/MIPS FPU Emulator v1.5
- mknod: /dev/usb/lp0: No such file or directory
- Using /lib/modules/2.4.31-danube-3.0.5.4-shc-bas83/kernel/drivers/net/admmod.o
- Loading ADM6996 driver...
- 6996I SMI Mode-Chip ID:71023
- Using /lib/modules/2.4.31-danube-3.0.5.4-shc-bas83/hwinfodrv.o
- Warning: lHWINFO: init_hwinfo_module:Got major 244
- HWINFO: init_hwinfo_module:OK
- oading hwinfodrv will taint the kernel: no license
- See http://www.tux.org/lkml/#export-tainted for information about tainted modules
- Using /lib/modules/2.4.31-danube-3.0.5.4-shc-bas83/duslic.o
- @(#)DUSLIC Driver, Version 0.0.2
- (c) Copyright 2004, Infineon Technologies AG
- Using /lib/modules/2.4.31-danube-3.0.5.4-shc-bas83/danube_daa.o
- Warning: loading danube_daa will taint the ker@(#)CPC5621 Driver, Version 0.3.1.1
- (c) Copyright 2004, Infineon Technologies AG
- nel: no license
- See http://www.tux.org/lkml/#export-tainted for information about tainted modules
- Using /lib/modules/2.4.31-danube-3.0.5.4-shc-bas83/drv_tapi.o
- IFX TAPI, version 3.5.2.5, (c) 2007 Infineon Technologies
- Using /lib/modules/2.4.31-danube-3.0.5.4-shc-bas83/drv_vmmc.o
- IFX VMMC device driver, version 1.1.6.5, (c) 2007 Infineon Technologies AG
- Using /lib/modules/2.4.31-danube-3.0.5.4-shc-bas83/leddrv.o
- setup_gpt: timer = 5, freq = 50000, return = 0
- Nothing to flush.
- syslogd: KSYM_INIT: 2.4 kernel detected.: Success
- /etc/init.d/rcS: 128: logging_ng: not found
- om_cpe: local log enabled (fd=8)
- om_cpe: console log enabled (fd=9)
- om_cpe: local log enabled (fd=10)
- om_cpe: console log enabled (fd=11)
- om_cpe: local log enabled (fd=12)
- om_cpe: console log enabled (fd=13)
- om_cpe: local log enabled (fd=14)
- om_cpe: console log enabled (fd=15)
- om_cpe: local log enabled (fd=16)
- om_cpe: console log enabled (fd=17)
- om_cpe: local log enabled (fd=18)
- om_cpe: console log enabled (fd=19)
- om_cpe: local log enabled (fd=20)
- om_cpe: console log enabled (fd=21)
- Jan 1 00:00:03 Inf <EVENT> syslogd: init 9
- Jan 1 00:00:03 Inf <EVENT> syslogd: restart
- wdt_open:wdt_open
- wdt_ioctl:enable watch dog timer!
- Jan 1 00:00:03 War <EVENT> kernel: wdt_open:wdt_open
- Jan 1 00:00:03 War <EVENT> kernel: wdt_ioctl:enable watch dog timer!
- Jan 1 00:00:03 Inf <EVENT> syslog: TMOND: My PID is 98
- Jan 1 00:00:03 Inf <EVENT> syslog: TMOND: Starting Watchdog...
- Jan 1 00:00:03 Eme <EVENT> syslog: TMOND: Setting PWL! 3
- Jan 1 00:00:03 Eme <EVENT> syslog: TMOND: Setting CLKDIV ! 3
- Jan 1 00:00:03 Inf <EVENT> syslog: TMOND: Watchdog started. Timeout is set to 4s.
- user scripts exec /config/scripts/script
- /etc/init.d/rcS: 149: /c
- Please press Enter to activate this console. Jan 1 00:00:05 Inf <EVENT> scm: 000-00-00 Starting Service Management Framework, Version 2 (2.0.1)
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- -- Danube Primary loader --
- Version : 4.1.24.52.12
- Build Profile : sx76x_danube_a
- Build Date : Jun 10 2009 - 17:11:31
- --> Extract primary loader [ OK ]
- --> Validate secondary loader (FLASH) [ OK ]
- -- Danube Secondary loader --
- Version : 4.1.28.52.12
- Build Profile : sx76x_danube_b
- Build Date : Dec 15 2009 - 17:54:55
- --> Extract secondary loader [ OK ]
- --> Press enter to activate cli [ 00 ]
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x > help
- base - print or set address offset
- bootm - boot application image from memory
- bootp - boot image via network using BootP/TFTP protocol
- bootd - boot default, i.e., run 'bootcmd'
- cmp - memory compare
- cp - memory copy
- crc32 - checksum calculation
- erase - erase FLASH memory
- flinfo - print FLASH memory information
- go - start application at address 'addr'
- help - print online help
- loop - infinite loop on address range
- md - memory display
- mm - memory modify (auto-incrementing)
- mtest - simple RAM test
- mw - memory write (fill)
- nm - memory modify (constant address)
- printenv- print environment variables
- protect - enable or disable FLASH write protection
- rarpboot- boot image via network using RARP/TFTP protocol
- reset - Perform RESET of the CPU
- run - run commands in an environment variable
- saveenv - save environment variables to persistent storage
- setenv - set environment variables
- tftpboot- boot image via network using TFTP protocol
- and env variables ipaddr and serverip
- upgrade - data_block_name srcAddr srcLen 0/1
- ? - alias for 'help'
- sx76x > printenv
- bootcmd=run flash_flash
- bootdelay=0
- baudrate=115200
- preboot=echo;echo Type "run flash_nfs" to mount root filesystem over NFS;echo
- hwboardid=sx76x-08-32
- bootstrap=1
- console_dev=ttyS1
- validate_images=on
- keep_magic=on
- netdev=eth0
- ramargs=setenv bootargs root=/dev/ram rw
- addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname):$(netdev):off
- ramdisk_addr=B0100000
- flash_self=run ramargs addip addmisc;bootm $(kernel_addr) $(ramdisk_addr)
- bootfile=runtime.img
- primary_boot_file=primary_boot.img
- secondary_boot_file=secondary_boot.img
- runtime_file=runtime.img
- flashargs=setenv bootargs root=/dev/mtdblock1 rootfstype=squashfs
- flash_flash=run flashargs addmisc; bootm $(kernel_addr)
- update_primary=tftpboot 80400000 $(primary_boot_file);upgrade primary 80400000 $(filesize) 0
- update_secondary=tftpboot 80400000 $(secondary_boot_file);upgrade secondary 80400000 $(filesize) 0
- update_runtime=tftpboot 80400000 $(runtime_file);upgrade runtime 80400000 $(filesize) 0
- reset_nvram=erase 0xB000E000 0xB000EBFF 1
- addmisc=setenv bootargs $(bootargs) ethaddr=$(ethaddr) panic=1
- tftp_RootDir=tftpboot
- tftp_DeviceDir=porta_danube
- tftp_Rootfspath=root
- kernelfile=uImage
- nfsargs=setenv bootargs root=/dev/nfs rw
- add_nfsrootfs=setenv bootargs $(bootargs) nfsroot=/$(tftp_RootDir)/$(tftp_DeviceDir)/$(tftp_Rootfspath)
- flash_nfs=run nfsargs add_nfsrootfs addip addmisc;bootm $(kernel_addr)
- nfs_flash=tftp 0x80400000 $(kernelfile);run flashargs addip addmisc;bootm 0x80400000
- nfs_nfs=tftp 0x80400000 $(kernelfile);run nfsargs add_nfsrootfs addip addmisc;bootm 0x80400000
- silent=0
- rnd_num=
- hwid=Q706-B731
- ethcnt=8
- boardid=sx763
- usbpower=1
- platform_type=2
- desc=CT0130000000007280810
- ethaddr=XX:XX:XX:XX:XX:XX
- customer=0
- default_variant=ethernet
- primary_version=v4.1.24.52.12
- filesize=30180
- gatewayip=192.168.2.1
- ipaddr=192.168.2.1
- serverip=192.168.2.16
- variant=ethernet
- options=2
- stdin=serial
- stdout=serial
- stderr=serial
- Environment size: 1933/3068 bytes
- sx76x > bootp
- BOOTP broadcast 0
- B BOOTP broadcast 1
- B BOOTP broadcast 2
- B BOOTP broadcast 3
- B BOOTP broadcast 4
- Retry count exceeded; starting again
- BOOTP broadcast 0
- B BOOTP broadcast 1
- B BOOTP broadcast 2
- B BOOTP broadcast 3
- B BOOTP broadcast 4
- Retry count exceeded; starting again
- BOOTP broadcast 0
- B BOOTP broadcast 1
- B BOOTP broadcast 2
- B BOOTP broadcast 3
- B BOOTP broadcast 4
- Retry count exceeded; starting again
- BOOTP broadcast 0
- B BOOTP broadcast 1
- B BOOTP broadcast 2
- B BOOTP broadcast 3
- B BOOTP broadcast 4
- checksum bad
- checksum bad
- Retry count exceeded; starting again
- BOOTP broadcast 0
- B BOOTP broadcast 1
- B BOOTP broadcast 2
- B BOOTP broadcast 3
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- -- Danube Primary loader --
- Version : 4.1.24.52.12
- Build Profile : sx76x_danube_a
- Build Date : Jun 10 2009 - 17:11:31
- --> Extract primary loader [ OK ]
- --> Validate secondary loader (FLASH) [ OK ]
- -- Danube Secondary loader --
- Version : 4.1.28.52.12
- Build Profile : sx76x_danube_b
- Build Date : Dec 15 2009 - 17:54:55
- --> Extract secondary loader [ OK ]
- --> Press enter to activate cli [ 00 ]
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x > help
- base - print or set address offset
- bootm - boot application image from memory
- bootp - boot image via network using BootP/TFTP protocol
- bootd - boot default, i.e., run 'bootcmd'
- cmp - memory compare
- cp - memory copy
- crc32 - checksum calculation
- erase - erase FLASH memory
- flinfo - print FLASH memory information
- go - start application at address 'addr'
- help - print online help
- loop - infinite loop on address range
- md - memory display
- mm - memory modify (auto-incrementing)
- mtest - simple RAM test
- mw - memory write (fill)
- nm - memory modify (constant address)
- printenv- print environment variables
- protect - enable or disable FLASH write protection
- rarpboot- boot image via network using RARP/TFTP protocol
- reset - Perform RESET of the CPU
- run - run commands in an environment variable
- saveenv - save environment variables to persistent storage
- setenv - set environment variables
- tftpboot- boot image via network using TFTP protocol
- and env variables ipaddr and serverip
- upgrade - data_block_name srcAddr srcLen 0/1
- ? - alias for 'help'
- sx76x > printenv
- bootcmd=run flash_flash
- bootdelay=0
- baudrate=115200
- preboot=echo;echo Type "run flash_nfs" to mount root filesystem over NFS;echo
- hwboardid=sx76x-08-32
- bootstrap=1
- console_dev=ttyS1
- validate_images=on
- keep_magic=on
- netdev=eth0
- ramargs=setenv bootargs root=/dev/ram rw
- addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname):$(netdev):off
- ramdisk_addr=B0100000
- flash_self=run ramargs addip addmisc;bootm $(kernel_addr) $(ramdisk_addr)
- bootfile=runtime.img
- primary_boot_file=primary_boot.img
- secondary_boot_file=secondary_boot.img
- runtime_file=runtime.img
- flashargs=setenv bootargs root=/dev/mtdblock1 rootfstype=squashfs
- flash_flash=run flashargs addmisc; bootm $(kernel_addr)
- update_primary=tftpboot 80400000 $(primary_boot_file);upgrade primary 80400000 $(filesize) 0
- update_secondary=tftpboot 80400000 $(secondary_boot_file);upgrade secondary 80400000 $(filesize) 0
- update_runtime=tftpboot 80400000 $(runtime_file);upgrade runtime 80400000 $(filesize) 0
- reset_nvram=erase 0xB000E000 0xB000EBFF 1
- addmisc=setenv bootargs $(bootargs) ethaddr=$(ethaddr) panic=1
- tftp_RootDir=tftpboot
- tftp_DeviceDir=porta_danube
- tftp_Rootfspath=root
- kernelfile=uImage
- nfsargs=setenv bootargs root=/dev/nfs rw
- add_nfsrootfs=setenv bootargs $(bootargs) nfsroot=/$(tftp_RootDir)/$(tftp_DeviceDir)/$(tftp_Rootfspath)
- flash_nfs=run nfsargs add_nfsrootfs addip addmisc;bootm $(kernel_addr)
- nfs_flash=tftp 0x80400000 $(kernelfile);run flashargs addip addmisc;bootm 0x80400000
- nfs_nfs=tftp 0x80400000 $(kernelfile);run nfsargs add_nfsrootfs addip addmisc;bootm 0x80400000
- silent=0
- rnd_num=
- hwid=Q706-B731
- ethcnt=8
- boardid=sx763
- usbpower=1
- platform_type=2
- desc=CT0130000000007280810
- ethaddr=XX:XX:XX:XX:XX:XX
- customer=0
- default_variant=ethernet
- primary_version=v4.1.24.52.12
- filesize=30180
- gatewayip=192.168.2.1
- ipaddr=192.168.2.1
- serverip=192.168.2.16
- variant=ethernet
- options=2
- stdin=serial
- stdout=serial
- stderr=serial
- Environment size: 1933/3068 bytes
- sx76x > bootp
- BOOTP broadcast 0
- B BOOTP broadcast 1
- B BOOTP broadcast 2
- B BOOTP broadcast 3
- B BOOTP broadcast 4
- Retry count exceeded; starting again
- BOOTP broadcast 0
- B BOOTP broadcast 1
- B BOOTP broadcast 2
- B BOOTP broadcast 3
- B BOOTP broadcast 4
- Retry count exceeded; starting again
- BOOTP broadcast 0
- B BOOTP broadcast 1
- B BOOTP broadcast 2
- B BOOTP broadcast 3
- B BOOTP broadcast 4
- Retry count exceeded; starting again
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- -- Danube Primary loader --
- Version : 4.1.24.52.12
- Build Profile : sx76x_danube_a
- Build Date : Jun 10 2009 - 17:11:31
- --> Extract primary loader [ OK ]
- --> Validate secondary loader (FLASH) [ OK ]
- -- Danube Secondary loader --
- Version : 4.1.28.52.12
- Build Profile : sx76x_danube_b
- Build Date : Dec 15 2009 - 17:54:55
- --> Extract secondary loader [ OK ]
- --> Press enter to activate cli [ 00 ]
- --> Validate runtime image (FLASH) [ OK ]
- --> Extracting runtime [ OK ]
- Starting...
- memsize=32
- flash_start=0xb0000000
- flash_size=8388608 (0x800000)
- reset_sregs(rcu_stat,rcu_stat_sr)=0x20260008,0x20267FFC
- hwmem_size=0x0200-0x00700000 : "rootfs"
- 0x00720000-0x00800000 : "PSA"
- 0x0000e000-0x00010000 : "nvram"
- 0x00700000-0x00720000 : "oops"
- mtdoops: Attached to MTD device 4
- Initializing Cryptographic API
- Infineon DEU initialization.
- deu_init(): calling ifxdeu_init_aes()
- ifxdeu initialize!
- Using Infineon DEU for AES algorithm (multiblock).
- deu_init(): calling ifxdeu_init_md5()
- Using Infineon DEU for MD5 algorithm (multiblock).
- ifxdeu nitialized OK. Device Major : 247
- NET4: Linux TCP/IP 1.0 for NET4.0
- IP Protocols: ICMP, UDP, TCP, IGMP
- IP: routing cache hash table of 512 buckets, 4Kbytes
- TCP: Hash tables configured (established 2048 bind 4096)
- Linux IP multicast router 0.06 plus PIM-SM
- Netfilter messages via NETLINK v0.12.
- ip_conntrack version 2.1 (248 buckets, 1984 max) - 664 bytes per conntrack
- ip_conntrack_pptp version 1.9 loaded
- ip_conntrack_rtsp v0.01 loading
- ip_nat_pptp version 1.5 loaded
- ip_nat_rtsp v0.01 loading
- ip_tables: (C) 2000-2002 Netfilter core team
- netfilter PSD loaded - (c) astaro AG
- NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
- NET4: Ethernet Bridge 008 for NET4.0
- 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
- All bugs added by David S. Miller <davem@redhat.com>
- Danube Port Initialization
- DANUBE MIPS24KEc MPS mailbox driver, Version 1.1.0
- (c) Copyright 2006, Infineon Technologies AG
- DANUBE_RCU_RST_REQ = 0x10000008
- ifx_mps_reset ready
- IFX_MPS: using proc fs
- VFS: Mounted root (squashfs filesystem) readonly.
- Mounted devfs on /dev
- init started: BusyBox v1.00 (2009.12.15-16:52+0000) multi-call binary
- Starting pid 14, console /dev/ttyS1: '/etc/init.d/rcS'
- Algorithmics/MIPS FPU Emulator v1.
- 5
- mknod: /dev/usb/lp0: No such file or directory
- Using /lib/modules/2.4.31-danube-3.0.5.4-shc-bas83/kernel/drivers/net/admmod.o
- Loading ADM6996 driver...
- 6996I SMI Mode-Chip ID:71023
- Using /lib/modules/2.4.31-danube-3.0.5.4-shc-bas83/hwinfodrv.o
- Warning: lHWINFO: init_hwinfo_module:Got major 244
- HWINFO: init_hwinfo_module:OK
- oading hwinfodrv will taint the kernel: no license
- See http://www.tux.org/lkml/#export-tainted for information about tainted modules
- Using /lib/modules/2.4.31-danube-3.0.5.4-shc-bas83/duslic.o
- @(#)DUSLIC
- Driver, Version 0.0.2
- (c) Copyright 2004, Infineon Technologies AG
- Using /lib/modules/2.4.31-danube-3.0.5.4-shc-bas83/danube_daa.o
- Warning: loading danube_daa will taint the ker@(#)CPC5621 Driver, Version 0.3.1.1
- (c) Copyright 2004, Infineon Technologies AG
- nel: no license
- See http://www.tux.org/lkml/#export-tainted for information about tainted modules
- Using
- /lib/modules/2.4.31-danube-3.0.5.4-shc-bas83/drv_tapi.o
- IFX TAPI, version 3.5.2.5, (c) 2007 Infineon Technologies
- Using /lib/modules/2.4.31-danube-3.0.5.4-shc-bas83/drv_vmmc.o
- IFX VMMC device driver, version 1.1.6.5, (c) 2007 Infineon Technologies AG
- Using /lib/modules/2.4.31-danube-3.0.5.4-shc-bas83/leddrv.o
- setup_gpt: timer = 5, freq = 50000, return = 0
- Nothing to flush.
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- -- Danube Primary loader --
- Version : 4.1.24.52.12
- Build Profile : sx76x_danube_a
- Build Date : Jun 10 2009 - 17:11:31
- --> Extract primary loader [ OK ]
- --> Validate secondary loader (FLASH) [ OK ]
- -- Danube Secondary loader --
- Version : 4.1.28.52.12
- Build Profile : sx76x_danube_b
- Build Date : Dec 15 2009 - 17:54:55
- --> Extract secondary loader [ OK ]
- --> Press enter to activate cli [ 00 ]
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x > help
- base - print or set address offset
- bootm - boot application image from memory
- bootp - boot image via network using BootP/TFTP protocol
- bootd - boot default, i.e., run 'bootcmd'
- cmp - memory compare
- cp - memory copy
- crc32 - checksum calculation
- erase - erase FLASH memory
- flinfo - print FLASH memory information
- go - start application at address 'addr'
- help - print online help
- loop - infinite loop on address range
- md - memory display
- mm - memory modify (auto-incrementing)
- mtest - simple RAM test
- mw - memory write (fill)
- nm - memory modify (constant address)
- printenv- print environment variables
- protect - enable or disable FLASH write protection
- rarpboot- boot image via network using RARP/TFTP protocol
- reset - Perform RESET of the CPU
- run - run commands in an environment variable
- saveenv - save environment variables to persistent storage
- setenv - set environment variables
- tftpboot- boot image via network using TFTP protocol
- and env variables ipaddr and serverip
- upgrade - data_block_name srcAddr srcLen 0/1
- ? - alias for 'help'
- sx76x > tftpboot
- TFTP server 192.168.2.16; our IP 192.168.2.1
- Filename 'runtime.img'.
- Load address: 0x80400000
- Loading: #######################################
- done
- Bytes transferred = 196992 (30180 hex)
- sx76x > go 0x80400000
- ## Starting application at 0x80400000 ...
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- -- Danube Primary loader --
- Version : 4.1.24.52.12
- Build Profile : sx76x_danube_a
- Build Date : Jun 10 2009 - 17:11:31
- --> Extract primary loader [ OK ]
- --> Validate secondary loader (FLASH) [ OK ]
- -- Danube Secondary loader --
- Version : 4.1.28.52.12
- Build Profile : sx76x_danube_b
- Build Date : Dec 15 2009 - 17:54:55
- --> Extract secondary loader [ OK ]
- --> Press enter to activate cli [ 00 ]
- --> Validate runtime image (FLASH) [ OK ]
- --> Extracting runtime [ OK ]
- Starting...
- memsize=32
- flash_start=0xb0000000
- flash_size=8388608 (0x800000)
- reset_sregs(rcu_stat,rcu_stat_0":
- 0x00010000-0x00700000 : "secondary"
- 0x000f0000-0x00700000 : "rootfs"
- 0x00720000-0x00800000 : "PSA"
- 0x0000e000-0x00010000 : "nvram"
- 0x00700000-0x00720000 : "oops"
- mtdoops: Attached to MTD device 4
- Initializing Cryptographic API
- Infineon DEU initialization.
- deu_init(): calling ifxdeu_init_aes()
- ifxdeu initialize!
- Using Infineon DEU for AES algorithm (multiblock).
- deu_init(): calling ifxdeu_init_md5()
- Using Infineon DEU for MD5 algorithm (multiblock).
- ifxdeu nitialized OK. Device Major : 247
- NET4: Linux TCP/IP 1.0 for NET4.0
- IP Protocols: ICMP, UDP, TCP, IGMP
- IP: routing cache hash table of 512 buckets, 4Kbytes
- TCP: Hash tables configured (established 2048 bind 4096)
- Linux IP multicast router 0.06 plus PIM-SM
- Netfilter messages via NETLINK v0.12.
- ip_conntrack version 2.1 (248 buckets, 1984 max) - 664 bytes per conntrack
- ip_conntrack_pptp version 1.9 loaded
- ip_conntrack_rtsp v0.01 loading
- ip_nat_pptp version 1.5 loaded
- ip_nat_rtsp v0.01 loading
- ip_tables: (C) 2000-2002 Netfilter core team
- netfilter PSD loaded - (c) astaro AG
- NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
- NET4: Ethernet Bridge 008 for NET4.0
- 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
- All bugs added by David S. Miller <davem@redhat.com>
- Danube Port Initialization
- DANUBE MIPS24KEc MPS mailbox driver, Version 1.1.0
- (c) Copyright 2006, Infineon Technologies AG
- DANUBE_RCU_RST_REQ = 0x10000008
- ifx_mps_reset ready
- IFX_MPS: using proc fs
- VFS: Mounted root (squashfs filesystem) readonly.
- Mounted devfs on /dev
- init started: BusyBox v1.00 (2009.12.15-16:52+0000) multi-call binary
- Starting pid 14, console /dev/ttyS1: '/etc/init.d/rcS'
- Algorithmics/MIPS FPU Emulator v1.5
- mknod: /dev/usb/lp0: No such file or directory
- Using /lib/modules/2.4.31-danube-3.0.5.4-shc-bas83/kernel/drivers/net/admmod.o
- Loading ADM6996 driver...
- 6996I SMI Mode-Chip ID:71023
- Using /lib/modules/2.4.31-danube-3.0.5.4-shc-bas83/hwinfodrv.o
- Warning: lHWINFO: init_hwinfo_module:Got major 244
- HWINFO: init_hwinfo_module:OK
- oading hwinfodrv will taint the kernel: no license
- See http://www.tux.org/lkml/#export-tainted for information about tainted modules
- Using /lib/modules/2.4.31-danube-3.0.5.4-shc-bas83/duslic.o
- @(#)DUSLIC Driver, Version 0.0.2
- (c) Copyright 2004, Infineon Technologies AG
- Using /lib/modules/2.4.31-danube-3.0.5.4-shc-bas83/danube_daa.o
- Warning: loading danube_daa will taint the ker@(#)CPC5621 Driver, Version 0.3.1.1
- (c) Copyright 2004, Infineon Technologies AG
- nel: no license
- See http://www.tux.org/lkml/#export-tainted for information about tainted modules
- Using /lib/modules/2.4.31-danube-3.0.5.4-shc-bas83/drv_tapi.o
- IFX TAPI, version 3.5.2.5, (c) 2007 Infineon Technologies
- Using /lib/modules/2.4.31-danube-3.0.5.4-shc-bas83/drv_vmmc.o
- IFX VMMC device driver, version 1.1.6.5, (c) 2007 Infineon Technologies AG
- Using /lib/modules/2.4.31-danube-3.0.5.4-shc-bas83/leddrv.o
- setup_gpt: timer = 5, freq = 50000, return = 0
- Nothing to flush.
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- -- Danube Primary loader --
- Version : 4.1.24.52.12
- Build Profile : sx76x_danube_a
- Build Date : Jun 10 2009 - 17:11:31
- --> Extract primary loader [ OK ]
- --> Validate secondary loader (FLASH) [ OK ]
- -- Danube Secondary loader --
- Version : 4.1.28.52.12
- Build Profile : sx76x_danube_b
- Build Date : Dec 15 2009 - 17:54:55
- --> Extract secondary loader [ OK ]
- --> Press enter to activate cli [ 00 ]
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x > help
- base - print or set address offset
- bootm - boot application image from memory
- bootp - boot image via network using BootP/TFTP protocol
- bootd - boot default, i.e., run 'bootcmd'
- cmp - memory compare
- cp - memory copy
- crc32 - checksum calculation
- erase - erase FLASH memory
- flinfo - print FLASH memory information
- go - start application at address 'addr'
- help - print online help
- loop - infinite loop on address range
- md - memory display
- mm - memory modify (auto-incrementing)
- mtest - simple RAM test
- mw - memory write (fill)
- nm - memory modify (constant address)
- printenv- print environment variables
- protect - enable or disable FLASH write protection
- rarpboot- boot image via network using RARP/TFTP protocol
- reset - Perform RESET of the CPU
- run - run commands in an environment variable
- saveenv - save environment variables to persistent storage
- setenv - set environment variables
- tftpboot- boot image via network using TFTP protocol
- and env variables ipaddr and serverip
- upgrade - data_block_name srcAddr srcLen 0/1
- ? - alias for 'help'
- sx76x > tftpboot 80400000
- TFTP server 192.168.2.16; our IP 192.168.2.1
- Filename 'runtime.img'.
- Load address: 0x80400000
- Loading: #######################################
- done
- Bytes transferred = 196992 (30180 hex)
- sx76x > go0x80400000
- Usage:
- go - start application at address 'addr'
- sx76x >go 0x80400000
- Unknown command go' - try 'help'
- sx76x > run update_runtime
- TFTP server 192.168.2.16; our IP 192.168.2.1
- Filename 'runtime.img'.
- Load address: 0x80400000
- Loading: #######################################
- done
- Bytes transferred = 196992 (30180 hex)
- --> Validate image (RAM)
- wrong eoi_marker
- [FAILED]
- Cannot upgrade the image runtime
- sx76x > help
- base - print or set address offset
- bootm - boot application image from memory
- bootp - boot image via network using BootP/TFTP protocol
- bootd - boot default, i.e., run 'bootcmd'
- cmp - memory compare
- cp - memory copy
- crc32 - checksum calculation
- erase - erase FLASH memory
- flinfo - print FLASH memory information
- go - start application at address 'addr'
- help - print online help
- loop - infinite loop on address range
- md - memory display
- mm - memory modify (auto-incrementing)
- mtest - simple RAM test
- mw - memory write (fill)
- nm - memory modify (constant address)
- printenv- print environment variables
- protect - enable or disable FLASH write protection
- rarpboot- boot image via network using RARP/TFTP protocol
- reset - Perform RESET of the CPU
- run - run commands in an environment variable
- saveenv - save environment variables to persistent storage
- setenv - set environment variables
- tftpboot- boot image via network using TFTP protocol
- and env variables ipaddr and serverip
- upgrade - data_block_name srcAddr srcLen 0/1
- ? - alias for 'help'
- sx76x > printenv
- bootcmd=run flash_flash
- bootdelay=0
- baudrate=115200
- preboot=echo;echo Type "run flash_nfs" to mount root filesystem over NFS;echo
- hwboardid=sx76x-08-32
- bootstrap=1
- console_dev=ttyS1
- validate_images=on
- keep_magic=on
- netdev=eth0
- ramargs=setenv bootargs root=/dev/ram rw
- addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname):$(netdev):off
- ramdisk_addr=B0100000
- flash_self=run ramargs addip addmisc;bootm $(kernel_addr) $(ramdisk_addr)
- bootfile=runtime.img
- primary_boot_file=primary_boot.img
- secondary_boot_file=secondary_boot.img
- runtime_file=runtime.img
- flashargs=setenv bootargs root=/dev/mtdblock1 rootfstype=squashfs
- flash_flash=run flashargs addmisc; bootm $(kernel_addr)
- update_primary=tftpboot 80400000 $(primary_boot_file);upgrade primary 80400000 $(filesize) 0
- update_secondary=tftpboot 80400000 $(secondary_boot_file);upgrade secondary 80400000 $(filesize) 0
- update_runtime=tftpboot 80400000 $(runtime_file);upgrade runtime 80400000 $(filesize) 0
- reset_nvram=erase 0xB000E000 0xB000EBFF 1
- addmisc=setenv bootargs $(bootargs) ethaddr=$(ethaddr) panic=1
- tftp_RootDir=tftpboot
- tftp_DeviceDir=porta_danube
- tftp_Rootfspath=root
- kernelfile=uImage
- nfsargs=setenv bootargs root=/dev/nfs rw
- add_nfsrootfs=setenv bootargs $(bootargs) nfsroot=/$(tftp_RootDir)/$(tftp_DeviceDir)/$(tftp_Rootfspath)
- flash_nfs=run nfsargs add_nfsrootfs addip addmisc;bootm $(kernel_addr)
- nfs_flash=tftp 0x80400000 $(kernelfile);run flashargs addip addmisc;bootm 0x80400000
- nfs_nfs=tftp 0x80400000 $(kernelfile);run nfsargs add_nfsrootfs addip addmisc;bootm 0x80400000
- silent=0
- rnd_num=
- hwid=Q706-B731
- ethcnt=8
- boardid=sx763
- usbpower=1
- platform_type=2
- desc=CT0130000000007280810
- ethaddr=XX:XX:XX:XX:XX:XX
- customer=0
- default_variant=ethernet
- primary_version=v4.1.24.52.12
- variant=ethernet
- options=2
- stdin=serial
- stdout=serial
- stderr=serial
- filesize=30180
- gatewayip=192.168.2.1
- ipaddr=192.168.2.1
- serverip=192.168.2.16
- Environment size: 1933/3068 bytes
- sx76x > setenv validate_images=0
- sx76x > printenv
- Unknown command 'printenv' - try 'help'
- sx76x > printenv
- bootcmd=run flash_flash
- bootdelay=0
- baudrate=115200
- preboot=echo;echo Type "run flash_nfs" to mount root filesystem over NFS;echo
- hwboardid=sx76x-08-32
- bootstrap=1
- console_dev=ttyS1
- keep_magic=on
- netdev=eth0
- ramargs=setenv bootargs root=/dev/ram rw
- addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname):$(netdev):off
- ramdisk_addr=B0100000
- flash_self=run ramargs addip addmisc;bootm $(kernel_addr) $(ramdisk_addr)
- bootfile=runtime.img
- primary_boot_file=primary_boot.img
- secondary_boot_file=secondary_boot.img
- runtime_file=runtime.img
- flashargs=setenv bootargs root=/dev/mtdblock1 rootfstype=squashfs
- flash_flash=run flashargs addmisc; bootm $(kernel_addr)
- update_primary=tftpboot 80400000 $(primary_boot_file);upgrade primary 80400000 $(filesize) 0
- update_secondary=tftpboot 80400000 $(secondary_boot_file);upgrade secondary 80400000 $(filesize) 0
- update_runtime=tftpboot 80400000 $(runtime_file);upgrade runtime 80400000 $(filesize) 0
- reset_nvram=erase 0xB000E000 0xB000EBFF 1
- addmisc=setenv bootargs $(bootargs) ethaddr=$(ethaddr) panic=1
- tftp_RootDir=tftpboot
- tftp_DeviceDir=porta_danube
- tftp_Rootfspath=root
- kernelfile=uImage
- nfsargs=setenv bootargs root=/dev/nfs rw
- add_nfsrootfs=setenv bootargs $(bootargs) nfsroot=/$(tftp_RootDir)/$(tftp_DeviceDir)/$(tftp_Rootfspath)
- flash_nfs=run nfsargs add_nfsrootfs addip addmisc;bootm $(kernel_addr)
- nfs_flash=tftp 0x80400000 $(kernelfile);run flashargs addip addmisc;bootm 0x80400000
- nfs_nfs=tftp 0x80400000 $(kernelfile);run nfsargs add_nfsrootfs addip addmisc;bootm 0x80400000
- silent=0
- rnd_num=
- hwid=Q706-B731
- ethcnt=8
- boardid=sx763
- usbpower=1
- platform_type=2
- desc=CT0130000000007280810
- ethaddr=XX:XX:XX:XX:XX:XX
- customer=0
- default_variant=ethernet
- primary_version=v4.1.24.52.12
- variant=ethernet
- options=2
- stdin=serial
- stdout=serial
- stderr=serial
- filesize=30180
- gatewayip=192.168.2.1
- ipaddr=192.168.2.1
- serverip=192.168.2.16
- Environment size: 1914/3068 bytes
- sx76x > setenv validate_images = 0
- sx76x >
- Unknown command '' - try 'help'
- sx76x > printenv
- bootcmd=run flash_flash
- bootdelay=0
- baudrate=115200
- preboot=echo;echo Type "run flash_nfs" to mount root filesystem over NFS;echo
- hwboardid=sx76x-08-32
- bootstrap=1
- console_dev=ttyS1
- keep_magic=on
- netdev=eth0
- ramargs=setenv bootargs root=/dev/ram rw
- addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname):$(netdev):off
- ramdisk_addr=B0100000
- flash_self=run ramargs addip addmisc;bootm $(kernel_addr) $(ramdisk_addr)
- bootfile=runtime.img
- primary_boot_file=primary_boot.img
- secondary_boot_file=secondary_boot.img
- runtime_file=runtime.img
- flashargs=setenv bootargs root=/dev/mtdblock1 rootfstype=squashfs
- flash_flash=run flashargs addmisc; bootm $(kernel_addr)
- update_primary=tftpboot 80400000 $(primary_boot_file);upgrade primary 80400000 $(filesize) 0
- update_secondary=tftpboot 80400000 $(secondary_boot_file);upgrade secondary 80400000 $(filesize) 0
- update_runtime=tftpboot 80400000 $(runtime_file);upgrade runtime 80400000 $(filesize) 0
- reset_nvram=erase 0xB000E000 0xB000EBFF 1
- addmisc=setenv bootargs $(bootargs) ethaddr=$(ethaddr) panic=1
- tftp_RootDir=tftpboot
- tftp_DeviceDir=porta_danube
- tftp_Rootfspath=root
- kernelfile=uImage
- nfsargs=setenv bootargs root=/dev/nfs rw
- add_nfsrootfs=setenv bootargs $(bootargs) nfsroot=/$(tftp_RootDir)/$(tftp_DeviceDir)/$(tftp_Rootfspath)
- flash_nfs=run nfsargs add_nfsrootfs addip addmisc;bootm $(kernel_addr)
- nfs_flash=tftp 0x80400000 $(kernelfile);run flashargs addip addmisc;bootm 0x80400000
- nfs_nfs=tftp 0x80400000 $(kernelfile);run nfsargs add_nfsrootfs addip addmisc;bootm 0x80400000
- silent=0
- rnd_num=
- hwid=Q706-B731
- ethcnt=8
- boardid=sx763
- usbpower=1
- platform_type=2
- desc=CT0130000000007280810
- ethaddr=XX:XX:XX:XX:XX:XX
- customer=0
- default_variant=ethernet
- primary_version=v4.1.24.52.12
- variant=ethernet
- options=2
- stdin=serial
- stdout=serial
- stderr=serial
- filesize=30180
- gatewayip=192.168.2.1
- ipaddr=192.168.2.1
- serverip=192.168.2.16
- validate_images== 0
- Environment size: 1934/3068 bytes
- sx76x > setenv validate_images = off
- sx76x > printenv
- bootcmd=run flash_flash
- bootdelay=0
- baudrate=115200
- preboot=echo;echo Type "run flash_nfs" to mount root filesystem over NFS;echo
- hwboardid=sx76x-08-32
- bootstrap=1
- console_dev=ttyS1
- keep_magic=on
- netdev=eth0
- ramargs=setenv bootargs root=/dev/ram rw
- addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname):$(netdev):off
- ramdisk_addr=B0100000
- flash_self=run ramargs addip addmisc;bootm $(kernel_addr) $(ramdisk_addr)
- bootfile=runtime.img
- primary_boot_file=primary_boot.img
- secondary_boot_file=secondary_boot.img
- runtime_file=runtime.img
- flashargs=setenv bootargs root=/dev/mtdblock1 rootfstype=squashfs
- flash_flash=run flashargs addmisc; bootm $(kernel_addr)
- update_primary=tftpboot 80400000 $(primary_boot_file);upgrade primary 80400000 $(filesize) 0
- update_secondary=tftpboot 80400000 $(secondary_boot_file);upgrade secondary 80400000 $(filesize) 0
- update_runtime=tftpboot 80400000 $(runtime_file);upgrade runtime 80400000 $(filesize) 0
- reset_nvram=erase 0xB000E000 0xB000EBFF 1
- addmisc=setenv bootargs $(bootargs) ethaddr=$(ethaddr) panic=1
- tftp_RootDir=tftpboot
- tftp_DeviceDir=porta_danube
- tftp_Rootfspath=root
- kernelfile=uImage
- nfsargs=setenv bootargs root=/dev/nfs rw
- add_nfsrootfs=setenv bootargs $(bootargs) nfsroot=/$(tftp_RootDir)/$(tftp_DeviceDir)/$(tftp_Rootfspath)
- flash_nfs=run nfsargs add_nfsrootfs addip addmisc;bootm $(kernel_addr)
- nfs_flash=tftp 0x80400000 $(kernelfile);run flashargs addip addmisc;bootm 0x80400000
- nfs_nfs=tftp 0x80400000 $(kernelfile);run nfsargs add_nfsrootfs addip addmisc;bootm 0x80400000
- silent=0
- rnd_num=
- hwid=Q706-B731
- ethcnt=8
- boardid=sx763
- usbpower=1
- platform_type=2
- desc=CT0130000000007280810
- ethaddr=XX:XX:XX:XX:XX:XX
- customer=0
- default_variant=ethernet
- primary_version=v4.1.24.52.12
- variant=ethernet
- options=2
- stdin=serial
- stdout=serial
- stderr=serial
- filesize=30180
- gatewayip=192.168.2.1
- ipaddr=192.168.2.1
- serverip=192.168.2.16
- validate_images== off
- Environment size: 1936/3068 bytes
- sx76x > set validate_images off
- Unknown command 'set' - try 'help'
- sx76x > setnev validate_images 0
- Unknown command 'setnev' - try 'help'
- sx76x > setenv validate_images 0
- sx76x > printenv
- bootcmd=run flash_flash
- bootdelay=0
- baudrate=115200
- preboot=echo;echo Type "run flash_nfs" to mount root filesystem over NFS;echo
- hwboardid=sx76x-08-32
- bootstrap=1
- console_dev=ttyS1
- keep_magic=on
- netdev=eth0
- ramargs=setenv bootargs root=/dev/ram rw
- addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname):$(netdev):off
- ramdisk_addr=B0100000
- flash_self=run ramargs addip addmisc;bootm $(kernel_addr) $(ramdisk_addr)
- bootfile=runtime.img
- primary_boot_file=primary_boot.img
- secondary_boot_file=secondary_boot.img
- runtime_file=runtime.img
- flashargs=setenv bootargs root=/dev/mtdblock1 rootfstype=squashfs
- flash_flash=run flashargs addmisc; bootm $(kernel_addr)
- update_primary=tftpboot 80400000 $(primary_boot_file);upgrade primary 80400000 $(filesize) 0
- update_secondary=tftpboot 80400000 $(secondary_boot_file);upgrade secondary 80400000 $(filesize) 0
- update_runtime=tftpboot 80400000 $(runtime_file);upgrade runtime 80400000 $(filesize) 0
- reset_nvram=erase 0xB000E000 0xB000EBFF 1
- addmisc=setenv bootargs $(bootargs) ethaddr=$(ethaddr) panic=1
- tftp_RootDir=tftpboot
- tftp_DeviceDir=porta_danube
- tftp_Rootfspath=root
- kernelfile=uImage
- nfsargs=setenv bootargs root=/dev/nfs rw
- add_nfsrootfs=setenv bootargs $(bootargs) nfsroot=/$(tftp_RootDir)/$(tftp_DeviceDir)/$(tftp_Rootfspath)
- flash_nfs=run nfsargs add_nfsrootfs addip addmisc;bootm $(kernel_addr)
- nfs_flash=tftp 0x80400000 $(kernelfile);run flashargs addip addmisc;bootm 0x80400000
- nfs_nfs=tftp 0x80400000 $(kernelfile);run nfsargs add_nfsrootfs addip addmisc;bootm 0x80400000
- silent=0
- rnd_num=
- hwid=Q706-B731
- ethcnt=8
- boardid=sx763
- usbpower=1
- platform_type=2
- desc=CT0130000000007280810
- ethaddr=XX:XX:XX:XX:XX:XX
- customer=0
- default_variant=ethernet
- primary_version=v4.1.24.52.12
- variant=ethernet
- options=2
- stdin=serial
- stdout=serial
- stderr=serial
- filesize=30180
- gatewayip=192.168.2.1
- ipaddr=192.168.2.1
- serverip=192.168.2.16
- validate_images=0
- Environment size: 1932/3068 bytes
- sx76x > run update_runtime
- TFTP server 192.168.2.16; our IP 192.168.2.1
- Filename 'runtime.img'.
- Load address: 0x80400000
- Loading: #######################################
- done
- Bytes transferred = 196992 (30180 hex)
- --> Start flashing runtime image...
- Performing update: .... done
- Update: done
- sx76x > go go 0xb0020180
- ## Starting application at 0x00000000 ...
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- -- Danube Primary loader --
- Version : 4.1.24.52.12
- Build Profile : sx76x_danube_a
- Build Date : Jun 10 2009 - 17:11:31
- --> Extract primary loader [ OK ]
- --> Validate secondary loader (FLASH) [ OK ]
- -- Danube Secondary loader --
- Version : 4.1.28.52.12
- Build Profile : sx76x_danube_b
- Build Date : Dec 15 2009 - 17:54:55
- --> Extract secondary loader [ OK ]
- --> Press enter to activate cli [ 00 ]
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x > printenv
- bootcmd=run flash_flash
- bootdelay=0
- baudrate=115200
- preboot=echo;echo Type "run flash_nfs" to mount root filesystem over NFS;echo
- hwboardid=sx76x-08-32
- bootstrap=1
- console_dev=ttyS1
- validate_images=on
- keep_magic=on
- netdev=eth0
- ramargs=setenv bootargs root=/dev/ram rw
- addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname):$(netdev):off
- ramdisk_addr=B0100000
- flash_self=run ramargs addip addmisc;bootm $(kernel_addr) $(ramdisk_addr)
- bootfile=runtime.img
- primary_boot_file=primary_boot.img
- secondary_boot_file=secondary_boot.img
- runtime_file=runtime.img
- flashargs=setenv bootargs root=/dev/mtdblock1 rootfstype=squashfs
- flash_flash=run flashargs addmisc; bootm $(kernel_addr)
- update_primary=tftpboot 80400000 $(primary_boot_file);upgrade primary 80400000 $(filesize) 0
- update_secondary=tftpboot 80400000 $(secondary_boot_file);upgrade secondary 80400000 $(filesize) 0
- update_runtime=tftpboot 80400000 $(runtime_file);upgrade runtime 80400000 $(filesize) 0
- reset_nvram=erase 0xB000E000 0xB000EBFF 1
- addmisc=setenv bootargs $(bootargs) ethaddr=$(ethaddr) panic=1
- tftp_RootDir=tftpboot
- tftp_DeviceDir=porta_danube
- tftp_Rootfspath=root
- kernelfile=uImage
- nfsargs=setenv bootargs root=/dev/nfs rw
- add_nfsrootfs=setenv bootargs $(bootargs) nfsroot=/$(tftp_RootDir)/$(tftp_DeviceDir)/$(tftp_Rootfspath)
- flash_nfs=run nfsargs add_nfsrootfs addip addmisc;bootm $(kernel_addr)
- nfs_flash=tftp 0x80400000 $(kernelfile);run flashargs addip addmisc;bootm 0x80400000
- nfs_nfs=tftp 0x80400000 $(kernelfile);run nfsargs add_nfsrootfs addip addmisc;bootm 0x80400000
- silent=0
- rnd_num=
- hwid=Q706-B731
- ethcnt=8
- boardid=sx763
- usbpower=1
- platform_type=2
- desc=CT0130000000007280810
- ethaddr=XX:XX:XX:XX:XX:XX
- customer=0
- default_variant=ethernet
- primary_version=v4.1.24.52.12
- filesize=30180
- gatewayip=192.168.2.1
- ipaddr=192.168.2.1
- serverip=192.168.2.16
- variant=ethernet
- options=2
- stdin=serial
- stdout=serial
- stderr=serial
- Environment size: 1933/3068 bytes
- sx76x >
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- -- Danube Primary loader --
- Version : 4.1.24.52.12
- Build Profile : sx76x_danube_a
- Build Date : Jun 10 2009 - 17:11:31
- --> Extract primary loader [ OK ]
- --> Validate secondary loader (FLASH) [ OK ]
- -- Danube Secondary loader --
- Version : 4.1.28.52.12
- Build Profile : sx76x_danube_b
- Build Date : Dec 15 2009 - 17:54:55
- --> Extract secondary loader [ OK ]
- --> Press enter to activate cli [ 00 ]
- --> Validate runtime image (FLASH)
- wrong eoi_marker
- [FAILED]
- Trying tftp recovery download from 192.168.2.16 ...
- A TFTP server 192.168.2.16; our IP 192.168.2.1
- Filename 'runtime.img'.
- Load address: 0x80400000
- Loading: #######################################
- done
- Bytes transferred = 196992 (30180 hex)
- --> Validate image (RAM)
- wrong eoi_marker
- [FAILED]
- --> Validate runtime image (FLASH)
- wrong eoi_marker
- [FAILED]
- Trying tftp recovery download from 192.168.2.16 ...
- TFTP server 192.168.2.16; our IP 192.168.2.1
- Filename 'runtime.img'.
- Load address: 0x80400000
- Loading: #######################################
- done
- Bytes transferred = 196992 (30180 hex)
- --> Validate image (RAM)
- wrong eoi_marker
- [FAILED]
- --> Validate runtime image (FLASH)
- wrong eoi_marker
- [FAILED]
- Trying tftp recovery download from 192.168.2.16 ...
- TFTP server 192.168.2.16; our IP 192.168.2.1
- Filename 'runtime.img'.
- Load address: 0x80400000
- Loading: #######################################
- done
- Bytes transferred = 196992 (30180 hex)
- --> Validate image (RAM)
- wrong eoi_marker
- [FAILED]
- --> Validate runtime image (FLASH)
- wrong eoi_marker
- [FAILED]
- Trying tftp recovery download from 192.168.2.16 ...
- TFTP server 192.168.2.16; our IP 192.168.2.1
- Filename 'runtime.img'.
- Load address: 0x80400000
- Loading: #######################################
- done
- Bytes transferred = 196992 (30180 hex)
- --> Validate image (RAM)
- wrong eoi_marker
- [FAILED]
- --> Validate runtime image (FLASH)
- wrong eoi_marker
- [FAILED]
- Trying tftp recovery download from 192.168.2.16 ...
- TFTP server 192.168.2.16; our IP 192.168.2.1
- Filename 'runtime.img'.
- Load address: 0x80400000
- Loading: #######################################
- done
- Bytes transferred = 196992 (30180 hex)
- --> Validate image (RAM)
- wrong eoi_marker
- [FAILED]
- --> Validate runtime image (FLASH)
- wrong eoi_marker
- [FAILED]
- Trying tftp recovery download from 192.168.2.16 ...
- TFTP server 192.168.2.16; our IP 192.168.2.1
- Filename 'runtime.img'.
- Load address: 0x80400000
- Loading: #######################################
- done
- Bytes transferred = 196992 (30180 hex)
- --> Validate image (RAM)
- wrong eoi_marker
- [FAILED]
- --> Validate runtime image (FLASH)
- wrong eoi_marker
- [FAILED]
- Trying tftp recovery download from 192.168.2.16 ...
- TFTP server 192.168.2.16; our IP 192.168.2.1
- Filename 'runtime.img'.
- Load address: 0x80400000
- Loading: #######################################
- done
- Bytes transferred = 196992 (30180 hex)
- --> Validate image (RAM)
- wrong eoi_marker
- [FAILED]
- --> Validate runtime image (FLASH)
- wrong eoi_marker
- [FAILED]
- Trying tftp recovery download from 192.168.2.16 ...
- TFTP server 192.168.2.16; our IP 192.168.2.1
- Filename 'runtime.img'.
- Load address: 0x80400000
- Loading: #######################################
- done
- Bytes transferred = 196992 (30180 hex)
- --> Validate image (RAM)
- wrong eoi_marker
- [FAILED]
- --> Validate runtime image (FLASH)
- wrong eoi_marker
- [FAILED]
- Trying tftp recovery download from 192.168.2.16 ...
- TFTP server 192.168.2.16; our IP 192.168.2.1
- Filename 'runtime.img'.
- Load address: 0x80400000
- Loading: #######################################
- done
- Bytes transferred = 196992 (30180 hex)
- --> Validate image (RAM)
- wrong eoi_marker
- [FAILED]
- --> Validate runtime image (FLASH)
- wrong eoi_marker
- [FAILED]
- Trying tftp recovery download from 192.168.2.16 ...
- TFTP server 192.168.2.16; our IP 192.168.2.1
- Filename 'runtime.img'.
- Load address: 0x80400000
- Loading: #######################################
- done
- Bytes transferred = 196992 (30180 hex)
- --> Validate image (RAM)
- wrong eoi_marker
- [FAILED]
- --> Validate runtime image (FLASH)
- wrong eoi_marker
- [FAILED]
- Trying tftp recovery download from 192.168.2.16 ...
- TFTP server 192.168.2.16; our IP 192.168.2.1
- Filename 'runtime.img'.
- Load address: 0x80400000
- Loading: #######################################
- done
- Bytes transferred = 196992 (30180 hex)
- --> Validate image (RAM)
- wrong eoi_marker
- [FAILED]
- --> Validate runtime image (FLASH)
- wrong eoi_marker
- [FAILED]
- Trying tftp recovery download from 192.168.2.16 ...
- TFTP server 192.168.2.16; our IP 192.168.2.1
- Filename 'runtime.img'.
- Load address: 0x80400000
- Loading: #######################################
- done
- Bytes transferred = 196992 (30180 hex)
- --> Validate image (RAM)
- wrong eoi_marker
- [FAILED]
- --> Validate runtime image (FLASH)
- wrong eoi_marker
- [FAILED]
- Trying tftp recovery download from 192.168.2.16 ...
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- -- Danube Primary loader --
- Version : 4.1.24.52.12
- Build Profile : sx76x_danube_a
- Build Date : Jun 10 2009 - 17:11:31
- --> Extract primary loader [ OK ]
- --> Validate secondary loader (FLASH) [ OK ]
- -- Danube Secondary loader --
- Version : 4.1.28.52.12
- Build Profile : sx76x_danube_b
- Build Date : Dec 15 2009 - 17:54:55
- --> Extract secondary loader [ OK ]
- --> Press enter to activate cli [ 00 ]
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x > help
- base - print or set address offset
- bootm - boot application image from memory
- bootp - boot image via network using BootP/TFTP protocol
- bootd - boot default, i.e., run 'bootcmd'
- cmp - memory compare
- cp - memory copy
- crc32 - checksum calculation
- erase - erase FLASH memory
- flinfo - print FLASH memory information
- go - start application at address 'addr'
- help - print online help
- loop - infinite loop on address range
- md - memory display
- mm - memory modify (auto-incrementing)
- mtest - simple RAM test
- mw - memory write (fill)
- nm - memory modify (constant address)
- printenv- print environment variables
- protect - enable or disable FLASH write protection
- rarpboot- boot image via network using RARP/TFTP protocol
- reset - Perform RESET of the CPU
- run - run commands in an environment variable
- saveenv - save environment variables to persistent storage
- setenv - set environment variables
- tftpboot- boot image via network using TFTP protocol
- and env variables ipaddr and serverip
- upgrade - data_block_name srcAddr srcLen 0/1
- ? - alias for 'help'
- sx76x > setenv validate_images 0
- sx76x > printenv
- bootcmd=run flash_flash
- bootdelay=0
- baudrate=115200
- preboot=echo;echo Type "run flash_nfs" to mount root filesystem over NFS;echo
- hwboardid=sx76x-08-32
- bootstrap=1
- console_dev=ttyS1
- keep_magic=on
- netdev=eth0
- ramargs=setenv bootargs root=/dev/ram rw
- addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname):$(netdev):off
- ramdisk_addr=B0100000
- flash_self=run ramargs addip addmisc;bootm $(kernel_addr) $(ramdisk_addr)
- bootfile=runtime.img
- primary_boot_file=primary_boot.img
- secondary_boot_file=secondary_boot.img
- runtime_file=runtime.img
- flashargs=setenv bootargs root=/dev/mtdblock1 rootfstype=squashfs
- flash_flash=run flashargs addmisc; bootm $(kernel_addr)
- update_primary=tftpboot 80400000 $(primary_boot_file);upgrade primary 80400000 $(filesize) 0
- update_secondary=tftpboot 80400000 $(secondary_boot_file);upgrade secondary 80400000 $(filesize) 0
- update_runtime=tftpboot 80400000 $(runtime_file);upgrade runtime 80400000 $(filesize) 0
- reset_nvram=erase 0xB000E000 0xB000EBFF 1
- addmisc=setenv bootargs $(bootargs) ethaddr=$(ethaddr) panic=1
- tftp_RootDir=tftpboot
- tftp_DeviceDir=porta_danube
- tftp_Rootfspath=root
- kernelfile=uImage
- nfsargs=setenv bootargs root=/dev/nfs rw
- add_nfsrootfs=setenv bootargs $(bootargs) nfsroot=/$(tftp_RootDir)/$(tftp_DeviceDir)/$(tftp_Rootfspath)
- flash_nfs=run nfsargs add_nfsrootfs addip addmisc;bootm $(kernel_addr)
- nfs_flash=tftp 0x80400000 $(kernelfile);run flashargs addip addmisc;bootm 0x80400000
- nfs_nfs=tftp 0x80400000 $(kernelfile);run nfsargs add_nfsrootfs addip addmisc;bootm 0x80400000
- silent=0
- rnd_num=
- hwid=Q706-B731
- ethcnt=8
- boardid=sx763
- usbpower=1
- platform_type=2
- desc=CT0130000000007280810
- ethaddr=XX:XX:XX:XX:XX:XX
- customer=0
- default_variant=ethernet
- primary_version=v4.1.24.52.12
- filesize=30180
- gatewayip=192.168.2.1
- ipaddr=192.168.2.1
- serverip=192.168.2.16
- variant=ethernet
- options=2
- stdin=serial
- stdout=serial
- stderr=serial
- validate_images=0
- Environment size: 1932/3068 bytes
- sx76x > go 0xb0020180
- ## Starting application at 0xB0020180 ...
- U-Boot 2009.11.1 (May 13 2010 - 06:34:35)
- Board: unknown, chip part number 0x12B V1.3, DDR Speed 166 MHz, CPU Speed 333 MHz
- DRAM: 32 MB
- Flash: 8 MB
- *** Warning - bad CRC, using default environment
- Net: lq_cpe_eth
- Type "run flash_nfs" to mount root filesystem over NFS
- Hit any key to stop autoboot: 0
- Wrong Image Format for bootm command
- ERROR: can't get kernel image!
- DANUBE => help
- ? - alias for 'help'
- base - print or set address offset
- bdinfo - print Board Info structure
- boot - boot default, i.e., run 'bootcmd'
- bootd - boot default, i.e., run 'bootcmd'
- bootm - boot application image from memory
- bootp - boot image via network using BOOTP/TFTP protocol
- cmp - memory compare
- cp - memory copy
- crc32 - checksum calculation
- dhcp - boot image via network using DHCP/TFTP protocol
- echo - echo args to console
- editenv - edit environment variable
- erase - erase FLASH memory
- flinfo - print FLASH memory information
- fsinfo - print information about filesystems
- fsload - load binary file from a filesystem image
- go - start application at address 'addr'
- help - print online help
- httpd - httpd - start webserver
- iminfo - print header information for application image
- itest - return true/false on integer compare
- loop - infinite loop on address range
- ls - list files in a directory (default /)
- md - memory display
- mii - MII utility commands
- mm - memory modify (auto-incrementing address)
- mtest - simple RAM read/write test
- mw - memory write (fill)
- nm - memory modify (constant address)
- ping - send ICMP ECHO_REQUEST to network host
- printenv- print environment variables
- protect - enable or disable FLASH write protection
- rarpboot- boot image via network using RARP/TFTP protocol
- reset - Perform RESET of the CPU
- run - run commands in an environment variable
- setenv - set environment variables
- sleep - delay execution for some time
- sntp - synchronize RTC via network
- source - run script from memory
- tftpboot- boot image via network using TFTP protocol
- version - print monitor version
- DANUBE => version
- U-Boot 2009.11.1 (May 13 2010 - 06:34:35)
- DANUBE => bootm
- Wrong Image Format for bootm command
- ERROR: can't get kernel image!
- DANUBE => printenv
- bootcmd=run flash_flash
- bootdelay=5
- baudrate=115200
- loads_echo=
- preboot=echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo
- ram_addr=0x80500000
- kernel_addr=0xb0080000
- ipaddr=192.168.1.1
- ethaddr=00:01:02:03:04:05
- serverip=192.168.1.110
- rootpath=/export
- mtdparts=mtdparts=ifx-nor:448k(uboot)ro,64k(uboot_env)ro,64k(kernel),-(rootfs)
- flashargs=setenv bootargs rootfstype=squashfs,jffs2
- nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}
- addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off
- addmisc=setenv bootargs ${bootargs} init=/etc/preinit console=ttyS1,115200 ethaddr=${ethaddr} ${mtdparts}
- flash_flash=run flashargs addip addmisc;bootm ${kernel_addr}
- flash_nfs=run nfsargs addip addmisc;bootm ${kernel_addr}
- net_flash=run load_kernel flashargs addip addmisc;bootm ${ram_addr}
- net_nfs=run load_kernel nfsargs addip addmisc;bootm ${ram_addr}
- load_kernel=tftp ${ram_addr} ${tftppath}openwrt-ifxmips-uImage
- update_uboot=tftp 0x80500000 ${tftppath}u-boot.bin;era 0xb0020180 +${filesize};cp.b 0x80500000 0xb0020180 ${filesize}
- update_openwrt=tftp ${ram_addr} ${tftppath}openwrt-ifxmips-squashfs.image;era ${kernel_addr} +${filesize};cp.b ${ram_addr} ${kernel_addr} ${filesize}
- stdin=serial
- stdout=serial
- stderr=serial
- ethact=lq_cpe_eth
- ver=U-Boot 2009.11.1 (May 13 2010 - 06:34:35)
- bootargs=rootfstype=squashfs,jffs2 ip=192.168.1.1:192.168.1.110:::::off init=/etc/preinit console=ttyS1,115200 ethaddr=00:01:02:03:04:05 mtdparts=ifx-nor:448k(uboot)ro,64k(uboot_env)ro,64k(kernel),-(rootfs)
- Environment size: 1585/65532 bytes
- DANUBE =>
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- -- Danube Primary loader --
- Version : 4.1.24.52.12
- Build Profile : sx76x_danube_a
- Build Date : Jun 10 2009 - 17:11:31
- --> Extract primary loader [ OK ]
- --> Validate secondary loader (FLASH) [ OK ]
- -- Danube Secondary loader --
- Version : 4.1.28.52.12
- Build Profile : sx76x_danube_b
- Build Date : Dec 15 2009 - 17:54:55
- --> Extract secondary loader [ OK ]
- --> Press enter to activate cli [ 00 ]
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x > help
- base - print or set address offset
- bootm - boot application image from memory
- bootp - boot image via network using BootP/TFTP protocol
- bootd - boot default, i.e., run 'bootcmd'
- cmp - memory compare
- cp - memory copy
- crc32 - checksum calculation
- erase - erase FLASH memory
- flinfo - print FLASH memory information
- go - start application at address 'addr'
- help - print online help
- loop - infinite loop on address range
- md - memory display
- mm - memory modify (auto-incrementing)
- mtest - simple RAM test
- mw - memory write (fill)
- nm - memory modify (constant address)
- printenv- print environment variables
- protect - enable or disable FLASH write protection
- rarpboot- boot image via network using RARP/TFTP protocol
- reset - Perform RESET of the CPU
- run - run commands in an environment variable
- saveenv - save environment variables to persistent storage
- setenv - set environment variables
- tftpboot- boot image via network using TFTP protocol
- and env variables ipaddr and serverip
- upgrade - data_block_name srcAddr srcLen 0/1
- ? - alias for 'help'
- sx76x > setenv validate_images 0
- sx76x > printenv
- bootcmd=run flash_flash
- bootdelay=0
- baudrate=115200
- preboot=echo;echo Type "run flash_nfs" to mount root filesystem over NFS;echo
- hwboardid=sx76x-08-32
- bootstrap=1
- console_dev=ttyS1
- keep_magic=on
- netdev=eth0
- ramargs=setenv bootargs root=/dev/ram rw
- addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname):$(netdev):off
- ramdisk_addr=B0100000
- flash_self=run ramargs addip addmisc;bootm $(kernel_addr) $(ramdisk_addr)
- bootfile=runtime.img
- primary_boot_file=primary_boot.img
- secondary_boot_file=secondary_boot.img
- runtime_file=runtime.img
- flashargs=setenv bootargs root=/dev/mtdblock1 rootfstype=squashfs
- flash_flash=run flashargs addmisc; bootm $(kernel_addr)
- update_primary=tftpboot 80400000 $(primary_boot_file);upgrade primary 80400000 $(filesize) 0
- update_secondary=tftpboot 80400000 $(secondary_boot_file);upgrade secondary 80400000 $(filesize) 0
- update_runtime=tftpboot 80400000 $(runtime_file);upgrade runtime 80400000 $(filesize) 0
- reset_nvram=erase 0xB000E000 0xB000EBFF 1
- addmisc=setenv bootargs $(bootargs) ethaddr=$(ethaddr) panic=1
- tftp_RootDir=tftpboot
- tftp_DeviceDir=porta_danube
- tftp_Rootfspath=root
- kernelfile=uImage
- nfsargs=setenv bootargs root=/dev/nfs rw
- add_nfsrootfs=setenv bootargs $(bootargs) nfsroot=/$(tftp_RootDir)/$(tftp_DeviceDir)/$(tftp_Rootfspath)
- flash_nfs=run nfsargs add_nfsrootfs addip addmisc;bootm $(kernel_addr)
- nfs_flash=tftp 0x80400000 $(kernelfile);run flashargs addip addmisc;bootm 0x80400000
- nfs_nfs=tftp 0x80400000 $(kernelfile);run nfsargs add_nfsrootfs addip addmisc;bootm 0x80400000
- silent=0
- rnd_num=
- hwid=Q706-B731
- ethcnt=8
- boardid=sx763
- usbpower=1
- platform_type=2
- desc=CT0130000000007280810
- ethaddr=XX:XX:XX:XX:XX:XX
- customer=0
- default_variant=ethernet
- primary_version=v4.1.24.52.12
- filesize=30180
- gatewayip=192.168.2.1
- ipaddr=192.168.2.1
- serverip=192.168.2.16
- variant=ethernet
- options=2
- stdin=serial
- stdout=serial
- stderr=serial
- validate_images=0
- Environment size: 1932/3068 bytes
- sx76x > saveenv
- Saving Environment to Flash...
- Erasing flash...done
- Writing flash... done
- sx76x >
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- -- Danube Primary loader --
- Version : 4.1.24.52.12
- Build Profile : sx76x_danube_a
- Build Date : Jun 10 2009 - 17:11:31
- --> Extract primary loader [ OK ]
- --> Validate secondary loader (FLASH) [ OK ]
- -- Danube Secondary loader --
- Version : 4.1.28.52.12
- Build Profile : sx76x_danube_b
- Build Date : Dec 15 2009 - 17:54:55
- --> Extract secondary loader [ OK ]
- --> Press enter to activate cli [ 00 ]
- --> Validate runtime image (FLASH)
- wrong eoi_marker
- [FAILED]
- Trying tftp recovery download from 192.168.2.16 ...
- A TFTP server 192.168.2.16; our IP 192.168.2.1
- Filename 'runtime.img'.
- Load address: 0x80400000
- Loading: #######################################
- done
- Bytes transferred = 196992 (30180 hex)
- --> Start flashing runtime image...
- Performing update: .... done
- Update: done
- --> Validate runtime image (FLASH)
- wrong eoi_marker
- [FAILED]
- Trying tftp recovery download from 192.168.2.16 ...
- TFTP server 192.168.2.16; our IP 192.168.2.1
- Filename 'runtime.img'.
- Load address: 0x80400000
- Loading: #######################################
- done
- Bytes transferred = 196992 (30180 hex)
- --> Start flashing runtime image...
- Performing update: .... done
- Update: done
- --> Validate runtime image (FLASH)
- wrong eoi_marker
- [FAILED]
- Trying tftp recovery download from 192.168.2.16 ...
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- -- Danube Primary loader --
- Version : 4.1.24.52.12
- Build Profile : sx76x_danube_a
- Build Date : Jun 10 2009 - 17:11:31
- --> Extract primary loader [ OK ]
- --> Validate secondary loader (FLASH) [ OK ]
- -- Danube Secondary loader --
- Version : 4.1.28.52.12
- Build Profile : sx76x_danube_b
- Build Date : Dec 15 2009 - 17:54:55
- --> Extract secondary loader [ OK ]
- --> Press enter to activate cli [ 00 ]
- --> Validate runtime image (FLASH)
- wrong eoi_marker
- [FAILED]
- Trying tftp recovery download from 192.168.2.16 ...
- A TFTP server 192.168.2.16; our IP 192.168.2.1
- Filename 'runtime.img'.
- Load address: 0x80400000
- Loading: #######################################
- done
- Bytes transferred = 196992 (30180 hex)
- --> Start flashing runtime image...
- Performing update: ...
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- -- Danube Primary loader --
- Version : 4.1.24.52.12
- Build Profile : sx76x_danube_a
- Build Date : Jun 10 2009 - 17:11:31
- --> Extract primary loader [ OK ]
- --> Validate secondary loader (FLASH) [ OK ]
- -- Danube Secondary loader --
- Version : 4.1.28.52.12
- Build Profile : sx76x_danube_b
- Build Date : Dec 15 2009 - 17:54:55
- --> Extract secondary loader [ OK ]
- --> Press enter to activate cli [ 00 ]
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x > help
- base - print or set address offset
- bootm - boot application image from memory
- bootp - boot image via network using BootP/TFTP protocol
- bootd - boot default, i.e., run 'bootcmd'
- cmp - memory compare
- cp - memory copy
- crc32 - checksum calculation
- erase - erase FLASH memory
- flinfo - print FLASH memory information
- go - start application at address 'addr'
- help - print online help
- loop - infinite loop on address range
- md - memory display
- mm - memory modify (auto-incrementing)
- mtest - simple RAM test
- mw - memory write (fill)
- nm - memory modify (constant address)
- printenv- print environment variables
- protect - enable or disable FLASH write protection
- rarpboot- boot image via network using RARP/TFTP protocol
- reset - Perform RESET of the CPU
- run - run commands in an environment variable
- saveenv - save environment variables to persistent storage
- setenv - set environment variables
- tftpboot- boot image via network using TFTP protocol
- and env variables ipaddr and serverip
- upgrade - data_block_name srcAddr srcLen 0/1
- ? - alias for 'help'
- sx76x > printenv
- bootcmd=run flash_flash
- bootdelay=0
- baudrate=115200
- preboot=echo;echo Type "run flash_nfs" to mount root filesystem over NFS;echo
- hwboardid=sx76x-08-32
- bootstrap=1
- console_dev=ttyS1
- keep_magic=on
- netdev=eth0
- ramargs=setenv bootargs root=/dev/ram rw
- addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname):$(netdev):off
- ramdisk_addr=B0100000
- flash_self=run ramargs addip addmisc;bootm $(kernel_addr) $(ramdisk_addr)
- bootfile=runtime.img
- primary_boot_file=primary_boot.img
- secondary_boot_file=secondary_boot.img
- runtime_file=runtime.img
- flashargs=setenv bootargs root=/dev/mtdblock1 rootfstype=squashfs
- flash_flash=run flashargs addmisc; bootm $(kernel_addr)
- update_primary=tftpboot 80400000 $(primary_boot_file);upgrade primary 80400000 $(filesize) 0
- update_secondary=tftpboot 80400000 $(secondary_boot_file);upgrade secondary 80400000 $(filesize) 0
- update_runtime=tftpboot 80400000 $(runtime_file);upgrade runtime 80400000 $(filesize) 0
- reset_nvram=erase 0xB000E000 0xB000EBFF 1
- addmisc=setenv bootargs $(bootargs) ethaddr=$(ethaddr) panic=1
- tftp_RootDir=tftpboot
- tftp_DeviceDir=porta_danube
- tftp_Rootfspath=root
- kernelfile=uImage
- nfsargs=setenv bootargs root=/dev/nfs rw
- add_nfsrootfs=setenv bootargs $(bootargs) nfsroot=/$(tftp_RootDir)/$(tftp_DeviceDir)/$(tftp_Rootfspath)
- flash_nfs=run nfsargs add_nfsrootfs addip addmisc;bootm $(kernel_addr)
- nfs_flash=tftp 0x80400000 $(kernelfile);run flashargs addip addmisc;bootm 0x80400000
- nfs_nfs=tftp 0x80400000 $(kernelfile);run nfsargs add_nfsrootfs addip addmisc;bootm 0x80400000
- silent=0
- rnd_num=
- hwid=Q706-B731
- ethcnt=8
- boardid=sx763
- usbpower=1
- platform_type=2
- desc=CT0130000000007280810
- ethaddr=XX:XX:XX:XX:XX:XX
- customer=0
- default_variant=ethernet
- primary_version=v4.1.24.52.12
- filesize=30180
- gatewayip=192.168.2.1
- ipaddr=192.168.2.1
- serverip=192.168.2.16
- variant=ethernet
- options=2
- validate_images=0
- stdin=serial
- stdout=serial
- stderr=serial
- Environment size: 1932/3068 bytes
- sx76x > run update_runtime
- TFTP server 192.168.2.16; our IP 192.168.2.1
- Filename 'runtime.img'.
- Load address: 0x80400000
- Loading: #######################################
- done
- Bytes transferred = 196992 (30180 hex)
- --> Start flashing runtime image...
- Performing update: .... done
- Update: done
- sx76x > go b0020000
- ## Starting application at 0xB0020000 ...
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- -- Danube Primary loader --
- Version : 4.1.24.52.12
- Build Profile : sx76x_danube_a
- Build Date : Jun 10 2009 - 17:11:31
- --> Extract primary loader [ OK ]
- --> Validate secondary loader (FLASH) [ OK ]
- -- Danube Secondary loader --
- Version : 4.1.28.52.12
- Build Profile : sx76x_danube_b
- Build Date : Dec 15 2009 - 17:54:55
- --> Extract secondary loader [ OK ]
- --> Press enter to activate cli [ 00 ]
- --> Validate runtime image (FLASH)
- wrong eoi_marker
- [FAILED]
- Trying tftp recovery download from 192.168.2.16 ...
- A TFTP server 192.168.2.16; our IP 192.168.2.1
- Filename 'runtime.img'.
- Load address: 0x80400000
- Loading: #######################################
- done
- Bytes transferred = 196992 (30180 hex)
- --> Start flashing runtime image...
- Performing update: .... done
- Update: done
- --> Validate runtime image (FLASH)
- wrong eoi_marker
- [FAILED]
- Trying tftp recovery download from 192.168.2.16 ...
- TFTP server 192.168.2.16; our IP 192.168.2.1
- Filename 'runtime.img'.
- Load address: 0x80400000
- Loading: #######################################
- done
- Bytes transferred = 196992 (30180 hex)
- --> Start flashing runtime image...
- Performing update: .... done
- Update: done
- --> Validate runtime image (FLASH)
- wrong eoi_marker
- [FAILED]
- Trying tftp recovery download from 192.168.2.16 ...
- TFTP server 192.168.2.16; our IP 192.168.2.1
- Filename 'runtime.img'.
- Load address: 0x80400000
- Loading: #######################################
- done
- Bytes transferred = 196992 (30180 hex)
- --> Start flashing runtime image...
- Performing update: ...
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- -- Danube Primary loader --
- Version : 4.1.24.52.12
- Build Profile : sx76x_danube_a
- Build Date : Jun 10 2009 - 17:11:31
- --> Extract primary loader [ OK ]
- --> Validate secondary loader (FLASH) [ OK ]
- -- Danube Secondary loader --
- Version : 4.1.28.52.12
- Build Profile : sx76x_danube_b
- Build Date : Dec 15 2009 - 17:54:55
- --> Extract secondary loader [ OK ]
- --> Press enter to activate cli [ 00 ]
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x > help
- base - print or set address offset
- bootm - boot application image from memory
- bootp - boot image via network using BootP/TFTP protocol
- bootd - boot default, i.e., run 'bootcmd'
- cmp - memory compare
- cp - memory copy
- crc32 - checksum calculation
- erase - erase FLASH memory
- flinfo - print FLASH memory information
- go - start application at address 'addr'
- help - print online help
- loop - infinite loop on address range
- md - memory display
- mm - memory modify (auto-incrementing)
- mtest - simple RAM test
- mw - memory write (fill)
- nm - memory modify (constant address)
- printenv- print environment variables
- protect - enable or disable FLASH write protection
- rarpboot- boot image via network using RARP/TFTP protocol
- reset - Perform RESET of the CPU
- run - run commands in an environment variable
- saveenv - save environment variables to persistent storage
- setenv - set environment variables
- tftpboot- boot image via network using TFTP protocol
- and env variables ipaddr and serverip
- upgrade - data_block_name srcAddr srcLen 0/1
- ? - alias for 'help'
- sx76x > 0xb00000000
- Unknown command '0xb00000000' - try 'help'
- sx76x > go 0xb00000000
- ## Starting application at 0x00000000 ...
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- -- Danube Primary loader --
- Version : 4.1.24.52.12
- Build Profile : sx76x_danube_a
- Build Date : Jun 10 2009 - 17:11:31
- --> Extract primary loader [ OK ]
- --> Validate secondary loader (FLASH) [ OK ]
- -- Danube Secondary loader --
- Version : 4.1.28.52.12
- Build Profile : sx76x_danube_b
- Build Date : Dec 15 2009 - 17:54:55
- --> Extract secondary loader [ OK ]
- --> Press enter to activate cli [ 00 ]
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- -- Danube Primary loader --
- Version : 4.1.24.52.12
- Build Profile : sx76x_danube_a
- Build Date : Jun 10 2009 - 17:11:31
- --> Extract primary loader [ OK ]
- --> Validate secondary loader (FLASH) [ OK ]
- -- Danube Secondary loader --
- Version : 4.1.28.52.12
- Build Profile : sx76x_danube_b
- Build Date : Dec 15 2009 - 17:54:55
- --> Extract secondary loader [ OK ]
- --> Press enter to activate cli [ 00 ]
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x > go 0xb0020180
- ## Starting application at 0xB0020180 ...
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- -- Danube Primary loader --
- Version : 4.1.24.52.12
- Build Profile : sx76x_danube_a
- Build Date : Jun 10 2009 - 17:11:31
- --> Extract primary loader [ OK ]
- --> Validate secondary loader (FLASH) [ OK ]
- -- Danube Secondary loader --
- Version : 4.1.28.52.12
- Build Profile : sx76x_danube_b
- Build Date : Dec 15 2009 - 17:54:55
- --> Extract secondary loader [ OK ]
- --> Press enter to activate cli [ 00 ]
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x > run update_runtime
- TFTP server 192.168.2.16; our IP 192.168.2.1
- Filename 'runtime.img'.
- Load address: 0x80400000
- Loading: #######################################
- done
- Bytes transferred = 196992 (30180 hex)
- --> Start flashing runtime image...
- Performing update: ..... done
- Update: done
- sx76x > 0xb0020000
- Unknown command '0xb0020000' - try 'help'
- sx76x > go 0xb0020000
- ## Starting application at 0xB0020000 ...
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- -- Danube Primary loader --
- Version : 4.1.24.52.12
- Build Profile : sx76x_danube_a
- Build Date : Jun 10 2009 - 17:11:31
- --> Extract primary loader [ OK ]
- --> Validate secondary loader (FLASH) [ OK ]
- -- Danube Secondary loader --
- Version : 4.1.28.52.12
- Build Profile : sx76x_danube_b
- Build Date : Dec 15 2009 - 17:54:55
- --> Extract secondary loader [ OK ]
- --> Press enter to activate cli [ 00 ]
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x > run update_runtime
- TFTP server 192.168.2.16; our IP 192.168.2.1
- Filename 'runtime.img'.
- Load address: 0x80400000
- Loading: #######################################
- done
- Bytes transferred = 196992 (30180 hex)
- --> Start flashing runtime image...
- Performing update: .... done
- Update: done
- sx76x > go 0xb0020180
- ## Starting application at 0xB0020180 ...
- U-Boot 2009.11.1 (May 13 2010 - 06:34:35)
- Board: unknown, chip part number 0x12B V1.3, DDR Speed 166 MHz, CPU Speed 333 MHz
- DRAM: 32 MB
- Flash: 8 MB
- *** Warning - bad CRC, using default environment
- Net: lq_cpe_eth
- Type "run flash_nfs" to mount root filesystem over NFS
- Hit any key to stop autoboot: 0
- Wrong Image Format for bootm command
- ERROR: can't get kernel image!
- DANUBE => help
- ? - alias for 'help'
- base - print or set address offset
- bdinfo - print Board Info structure
- boot - boot default, i.e., run 'bootcmd'
- bootd - boot default, i.e., run 'bootcmd'
- bootm - boot application image from memory
- bootp - boot image via network using BOOTP/TFTP protocol
- cmp - memory compare
- cp - memory copy
- crc32 - checksum calculation
- dhcp - boot image via network using DHCP/TFTP protocol
- echo - echo args to console
- editenv - edit environment variable
- erase - erase FLASH memory
- flinfo - print FLASH memory information
- fsinfo - print information about filesystems
- fsload - load binary file from a filesystem image
- go - start application at address 'addr'
- help - print online help
- httpd - httpd - start webserver
- iminfo - print header information for application image
- itest - return true/false on integer compare
- loop - infinite loop on address range
- ls - list files in a directory (default /)
- md - memory display
- mii - MII utility commands
- mm - memory modify (auto-incrementing address)
- mtest - simple RAM read/write test
- mw - memory write (fill)
- nm - memory modify (constant address)
- ping - send ICMP ECHO_REQUEST to network host
- printenv- print environment variables
- protect - enable or disable FLASH write protection
- rarpboot- boot image via network using RARP/TFTP protocol
- reset - Perform RESET of the CPU
- run - run commands in an environment variable
- setenv - set environment variables
- sleep - delay execution for some time
- sntp - synchronize RTC via network
- source - run script from memory
- tftpboot- boot image via network using TFTP protocol
- version - print monitor version
- DANUBE => printenv
- bootcmd=run flash_flash
- bootdelay=5
- baudrate=115200
- loads_echo=
- preboot=echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo
- ram_addr=0x80500000
- kernel_addr=0xb0080000
- ipaddr=192.168.1.1
- ethaddr=00:01:02:03:04:05
- serverip=192.168.1.110
- rootpath=/export
- mtdparts=mtdparts=ifx-nor:448k(uboot)ro,64k(uboot_env)ro,64k(kernel),-(rootfs)
- flashargs=setenv bootargs rootfstype=squashfs,jffs2
- nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}
- addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off
- addmisc=setenv bootargs ${bootargs} init=/etc/preinit console=ttyS1,115200 ethaddr=${ethaddr} ${mtdparts}
- flash_flash=run flashargs addip addmisc;bootm ${kernel_addr}
- flash_nfs=run nfsargs addip addmisc;bootm ${kernel_addr}
- net_flash=run load_kernel flashargs addip addmisc;bootm ${ram_addr}
- net_nfs=run load_kernel nfsargs addip addmisc;bootm ${ram_addr}
- load_kernel=tftp ${ram_addr} ${tftppath}openwrt-ifxmips-uImage
- update_uboot=tftp 0x80500000 ${tftppath}u-boot.bin;era 0xb0020180 +${filesize};cp.b 0x80500000 0xb0020180 ${filesize}
- update_openwrt=tftp ${ram_addr} ${tftppath}openwrt-ifxmips-squashfs.image;era ${kernel_addr} +${filesize};cp.b ${ram_addr} ${kernel_addr} ${filesize}
- stdin=serial
- stdout=serial
- stderr=serial
- ethact=lq_cpe_eth
- ver=U-Boot 2009.11.1 (May 13 2010 - 06:34:35)
- bootargs=rootfstype=squashfs,jffs2 ip=192.168.1.1:192.168.1.110:::::off init=/etc/preinit console=ttyS1,115200 ethaddr=00:01:02:03:04:05 mtdparts=ifx-nor:448k(uboot)ro,64k(uboot_env)ro,64k(kernel),-(rootfs)
- Environment size: 1585/65532 bytes
- DANUBE => run net_nfs
- Using lq_cpe_eth device
- TFTP from server 192.168.1.110; our IP address is 192.168.1.1
- Filename 'openwrt-ifxmips-uImage'.
- Load address: 0x80500000
- Loading: ##############################################################
- done
- Bytes transferred = 902490 (dc55a hex)
- ## Booting kernel from Legacy Image at 80500000 ...
- Image Name: MIPS OpenWrt Linux-2.6.30.10
- Created: 2010-08-26 7:44:11 UTC
- Image Type: MIPS Linux Kernel Image (lzma compressed)
- Data Size: 902426 Bytes = 881.3 kB
- Load Address: 80002000
- Entry Point: 80002000
- Verifying Checksum ... OK
- Uncompressing Kernel Image ... OK
- Starting kernel ...
- Linux version 2.6.30.10 (openwrt@ampere) (gcc version 4.3.3 (GCC) ) #1 Thu Aug 26 00:39:20 PDT 2010
- console [early0] enableded led device: ifxmips:led:04
- Registered led device: ifxmips:led:05
- Registered led device: ifxmips:led:06
- Registered led device: ifxmips:led:07
- Registered led device: ifxmips:led:08
- Registered led device: ifxmips:led:09
- Registered led device: ifxmips:led:10
- Registered led device: ifxmips:led:11
- Registered led device: ifxmips:led:12
- Registered led device: ifxmips:led:13
- Registered led device: ifxmips:led:14
- Registered led device: ifxmips:led:15
- Registered led device: ifxmips:led:16
- Registered led device: ifxmips:led:17
- Registered led device: ifxmips:led:18
- Registered led device: ifxmips:led:19
- Registered led device: ifxmips:led:20
- Registered led device: ifxmips:led:21
- Registered led device: ifxmips:led:22
- Registered led device: ifxmips:led:23
- TCP westwood registered
- NET: Registered protocol family 17
- 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
- All bugs added by David S. Miller <davem@redhat.com>
- VFS: Cannot open root device "nfs" or unknown-block(0,255)
- Please append a correct "root=" boot option; here are the available partitions:
- 1f00 448 mtdblock0 (driver?)
- 1f01 64 mtdblock1 (driver?)
- 1f02 64 mtdblock2 (driver?)
- 1f03 7616 mtdblock3 (driver?)
- 1f04 7680 mtdblock4 (driver?)
- Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,255)
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- -- Danube Primary loader --
- Version : 4.1.24.52.12
- Build Profile : sx76x_danube_a
- Build Date : Jun 10 2009 - 17:11:31
- --> Extract primary loader [ OK ]
- --> Validate secondary loader (FLASH) [ OK ]
- -- Danube Secondary loader --
- Version : 4.1.28.52.12
- Build Profile : sx76x_danube_b
- Build Date : Dec 15 2009 - 17:54:55
- --> Extract secondary loader [ OK ]
- --> Press enter to activate cli [ 00 ]
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x > run update_runtime
- A A A A
- Retry count exceeded; starting again
- checksum bad
- A TFTP server 192.168.2.16; our IP 192.168.2.1
- Filename 'runtime.img'.
- Load address: 0x80400000
- Loading: checksum bad
- T #######################################
- done
- Bytes transferred = 196992 (30180 hex)
- --> Start flashing runtime image...
- Performing update: .... done
- Update: done
- sx76x > go 0xb0020180
- ## Starting application at 0xB0020180 ...
- U-Boot 2009.11.1 (May 13 2010 - 06:34:35)
- Board: unknown, chip part number 0x12B V1.3, DDR Speed 166 MHz, CPU Speed 333 MHz
- DRAM: 32 MB
- Flash: 8 MB
- *** Warning - bad CRC, using default environment
- Net: lq_cpe_eth
- Type "run flash_nfs" to mount root filesystem over NFS
- Hit any key to stop autoboot: 0
- DANUBE => help
- ? - alias for 'help'
- base - print or set address offset
- bdinfo - print Board Info structure
- boot - boot default, i.e., run 'bootcmd'
- bootd - boot default, i.e., run 'bootcmd'
- bootm - boot application image from memory
- bootp - boot image via network using BOOTP/TFTP protocol
- cmp - memory compare
- cp - memory copy
- crc32 - checksum calculation
- dhcp - boot image via network using DHCP/TFTP protocol
- echo - echo args to console
- editenv - edit environment variable
- erase - erase FLASH memory
- flinfo - print FLASH memory information
- fsinfo - print information about filesystems
- fsload - load binary file from a filesystem image
- go - start application at address 'addr'
- help - print online help
- httpd - httpd - start webserver
- iminfo - print header information for application image
- itest - return true/false on integer compare
- loop - infinite loop on address range
- ls - list files in a directory (default /)
- md - memory display
- mii - MII utility commands
- mm - memory modify (auto-incrementing address)
- mtest - simple RAM read/write test
- mw - memory write (fill)
- nm - memory modify (constant address)
- ping - send ICMP ECHO_REQUEST to network host
- printenv- print environment variables
- protect - enable or disable FLASH write protection
- rarpboot- boot image via network using RARP/TFTP protocol
- reset - Perform RESET of the CPU
- run - run commands in an environment variable
- setenv - set environment variables
- sleep - delay execution for some time
- sntp - synchronize RTC via network
- source - run script from memory
- tftpboot- boot image via network using TFTP protocol
- version - print monitor version
- DANUBE => printenv
- bootcmd=run flash_flash
- bootdelay=5
- baudrate=115200
- loads_echo=
- preboot=echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo
- ram_addr=0x80500000
- kernel_addr=0xb0080000
- ipaddr=192.168.1.1
- ethaddr=00:01:02:03:04:05
- serverip=192.168.1.110
- rootpath=/export
- mtdparts=mtdparts=ifx-nor:448k(uboot)ro,64k(uboot_env)ro,64k(kernel),-(rootfs)
- flashargs=setenv bootargs rootfstype=squashfs,jffs2
- nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}
- addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off
- addmisc=setenv bootargs ${bootargs} init=/etc/preinit console=ttyS1,115200 ethaddr=${ethaddr} ${mtdparts}
- flash_flash=run flashargs addip addmisc;bootm ${kernel_addr}
- flash_nfs=run nfsargs addip addmisc;bootm ${kernel_addr}
- net_flash=run load_kernel flashargs addip addmisc;bootm ${ram_addr}
- net_nfs=run load_kernel nfsargs addip addmisc;bootm ${ram_addr}
- load_kernel=tftp ${ram_addr} ${tftppath}openwrt-ifxmips-uImage
- update_uboot=tftp 0x80500000 ${tftppath}u-boot.bin;era 0xb0020180 +${filesize};cp.b 0x80500000 0xb0020180 ${filesize}
- update_openwrt=tftp ${ram_addr} ${tftppath}openwrt-ifxmips-squashfs.image;era ${kernel_addr} +${filesize};cp.b ${ram_addr} ${kernel_addr} ${filesize}
- stdin=serial
- stdout=serial
- stderr=serial
- ethact=lq_cpe_eth
- ver=U-Boot 2009.11.1 (May 13 2010 - 06:34:35)
- Environment size: 1378/65532 bytes
- DANUBE => httpd
- starting httpd server from server 192.168.1.1
- http start
- ..................................................................................................................................................................................
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- -- Danube Primary loader --
- Version : 4.1.24.52.12
- Build Profile : sx76x_danube_a
- Build Date : Jun 10 2009 - 17:11:31
- --> Extract primary loader [ OK ]
- --> Validate secondary loader (FLASH) [ OK ]
- -- Danube Secondary loader --
- Version : 4.1.28.52.12
- Build Profile : sx76x_danube_b
- Build Date : Dec 15 2009 - 17:54:55
- --> Extract secondary loader [ OK ]
- --> Press enter to activate cli [ 00 ]
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x > run update_runtime
- TFTP server 192.168.2.16; our IP 192.168.2.1
- Filename 'runtime.img'.
- Load address: 0x80400000
- Loading: #######################################
- done
- Bytes transferred = 196992 (30180 hex)
- --> Start flashing runtime image...
- Performing update: .... done
- Update: done
- sx76x > go 0xb0020180
- ## Starting application at 0xB0020180 ...
- U-Boot 2009.11.1 (May 13 2010 - 06:34:35)
- Board: unknown, chip part number 0x12B V1.3, DDR Speed 166 MHz, CPU Speed 333 MHz
- DRAM: 32 MB
- Flash: 8 MB
- *** Warning - bad CRC, using default environment
- Net: lq_cpe_eth
- Type "run flash_nfs" to mount root filesystem over NFS
- Hit any key to stop autoboot: 0
- DANUBE => run net_nfs
- Using lq_cpe_eth device
- TFTP from server 192.168.1.110; our IP address is 192.168.1.1
- Filename 'openwrt-ifxmips-uImage'.
- Load address: 0x80500000
- Loading: ##############################################################
- done
- Bytes transferred = 901996 (dc36c hex)
- ## Booting kernel from Legacy Image at 80500000 ...
- Image Name: MIPS OpenWrt Linux-2.6.30.10
- Created: 2010-04-06 13:58:55 UTC
- Image Type: MIPS Linux Kernel Image (lzma compressed)
- Data Size: 901932 Bytes = 880.8 kB
- Load Address: 80002000
- Entry Point: 80002000
- Verifying Checksum ... OK
- Uncompressing Kernel Image ... OK
- Starting kernel ...
- Linux version 2.6.30.10 (openwrt@wrt1.marcant.net) (gcc version 4.3.3 (GCC) ) #15 Tue Apr 6 15:58:22 CEST 2010
- console [earlevice: ifxmips:led:06
- Registered led device: ifxmips:led:07
- Registered led device: ifxmips:led:08
- Registered led device: ifxmips:led:09
- Registered led device: ifxmips:led:10
- Registered led device: ifxmips:led:11
- Registered led device: ifxmips:led:12
- Registered led device: ifxmips:led:13
- Registered led device: ifxmips:led:14
- Registered led device: ifxmips:led:15
- Registered led device: ifxmips:led:16
- Registered led device: ifxmips:led:17
- Registered led device: ifxmips:led:18
- Registered led device: ifxmips:led:19
- Registered led device: ifxmips:led:20
- Registered led device: ifxmips:led:21
- Registered led device: ifxmips:led:22
- Registered led device: ifxmips:led:23
- TCP westwood registered
- NET: Registered protocol family 17
- 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
- All bugs added by David S. Miller <davem@redhat.com>
- VFS: Cannot open root device "nfs" or unknown-block(0,255)
- Please append a correct "root=" boot option; here are the available partitions:
- 1f00 448 mtdblock0 (driver?)
- 1f01 64 mtdblock1 (driver?)
- 1f02 64 mtdblock2 (driver?)
- 1f03 7616 mtdblock3 (driver?)
- 1f04 7680 mtdblock4 (driver?)
- Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,255)
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- -- Danube Primary loader --
- Version : 4.1.24.52.12
- Build Profile : sx76x_danube_a
- Build Date : Jun 10 2009 - 17:11:31
- --> Extract primary loader [ OK ]
- --> Validate secondary loader (FLASH) [ OK ]
- -- Danube Secondary loader --
- Version : 4.1.28.52.12
- Build Profile : sx76x_danube_b
- Build Date : Dec 15 2009 - 17:54:55
- --> Extract secondary loader [ OK ]
- --> Press enter to activate cli [ 00 ]
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x > run update_runtime
- TFTP server 192.168.2.16; our IP 192.168.2.1
- Filename 'runtime.img'.
- Load address: 0x80400000
- Loading: #######################################
- done
- Bytes transferred = 196992 (30180 hex)
- --> Start flashing runtime image...
- Performing update: .... done
- Update: done
- sx76x > go 0xB0020180
- ## Starting application at 0xB0020180 ...
- U-Boot 2009.11.1 (May 13 2010 - 06:34:35)
- Board: unknown, chip part number 0x12B V1.3, DDR Speed 166 MHz, CPU Speed 333 MHz
- DRAM: 32 MB
- Flash: 8 MB
- *** Warning - bad CRC, using default environment
- Net: lq_cpe_eth
- Type "run flash_nfs" to mount root filesystem over NFS
- Hit any key to stop autoboot: 0
- DANUBE => help
- ? - alias for 'help'
- base - print or set address offset
- bdinfo - print Board Info structure
- boot - boot default, i.e., run 'bootcmd'
- bootd - boot default, i.e., run 'bootcmd'
- bootm - boot application image from memory
- bootp - boot image via network using BOOTP/TFTP protocol
- cmp - memory compare
- cp - memory copy
- crc32 - checksum calculation
- dhcp - boot image via network using DHCP/TFTP protocol
- echo - echo args to console
- editenv - edit environment variable
- erase - erase FLASH memory
- flinfo - print FLASH memory information
- fsinfo - print information about filesystems
- fsload - load binary file from a filesystem image
- go - start application at address 'addr'
- help - print online help
- httpd - httpd - start webserver
- iminfo - print header information for application image
- itest - return true/false on integer compare
- loop - infinite loop on address range
- ls - list files in a directory (default /)
- md - memory display
- mii - MII utility commands
- mm - memory modify (auto-incrementing address)
- mtest - simple RAM read/write test
- mw - memory write (fill)
- nm - memory modify (constant address)
- ping - send ICMP ECHO_REQUEST to network host
- printenv- print environment variables
- protect - enable or disable FLASH write protection
- rarpboot- boot image via network using RARP/TFTP protocol
- reset - Perform RESET of the CPU
- run - run commands in an environment variable
- setenv - set environment variables
- sleep - delay execution for some time
- sntp - synchronize RTC via network
- source - run script from memory
- tftpboot- boot image via network using TFTP protocol
- version - print monitor version
- DANUBE => printenv
- bootcmd=run flash_flash
- bootdelay=5
- baudrate=115200
- loads_echo=
- preboot=echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo
- ram_addr=0x80500000
- kernel_addr=0xb0080000
- ipaddr=192.168.1.1
- ethaddr=00:01:02:03:04:05
- serverip=192.168.1.110
- rootpath=/export
- mtdparts=mtdparts=ifx-nor:448k(uboot)ro,64k(uboot_env)ro,64k(kernel),-(rootfs)
- flashargs=setenv bootargs rootfstype=squashfs,jffs2
- nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}
- addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off
- addmisc=setenv bootargs ${bootargs} init=/etc/preinit console=ttyS1,115200 ethaddr=${ethaddr} ${mtdparts}
- flash_flash=run flashargs addip addmisc;bootm ${kernel_addr}
- flash_nfs=run nfsargs addip addmisc;bootm ${kernel_addr}
- net_flash=run load_kernel flashargs addip addmisc;bootm ${ram_addr}
- net_nfs=run load_kernel nfsargs addip addmisc;bootm ${ram_addr}
- load_kernel=tftp ${ram_addr} ${tftppath}openwrt-ifxmips-uImage
- update_uboot=tftp 0x80500000 ${tftppath}u-boot.bin;era 0xb0020180 +${filesize};cp.b 0x80500000 0xb0020180 ${filesize}
- update_openwrt=tftp ${ram_addr} ${tftppath}openwrt-ifxmips-squashfs.image;era ${kernel_addr} +${filesize};cp.b ${ram_addr} ${kernel_addr} ${filesize}
- stdin=serial
- stdout=serial
- stderr=serial
- ethact=lq_cpe_eth
- ver=U-Boot 2009.11.1 (May 13 2010 - 06:34:35)
- Environment size: 1378/65532 bytes
- DANUBE => ls
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- -- Danube Primary loader --
- Version : 4.1.24.52.12
- Build Profile : sx76x_danube_a
- Build Date : Jun 10 2009 - 17:11:31
- --> Extract primary loader [ OK ]
- --> Validate secondary loader (FLASH) [ OK ]
- -- Danube Secondary loader --
- Version : 4.1.28.52.12
- Build Profile : sx76x_danube_b
- Build Date : Dec 15 2009 - 17:54:55
- --> Extract secondary loader [ OK ]
- --> Press enter to activate cli [ 00 ]
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x > go 0xB0020180
- ## Starting application at 0xB0020180 ...
- U-Boot 2009.11.1 (May 13 2010 - 06:34:35)
- Board: unknown, chip part number 0x12B V1.3, DDR Speed 166 MHz, CPU Speed 333 MHz
- DRAM: 32 MB
- Flash: 8 MB
- *** Warning - bad CRC, using default environment
- Net: lq_cpe_eth
- Type "run flash_nfs" to mount root filesystem over NFS
- Hit any key to stop autoboot: 0
- DANUBE => bootp
- BOOTP broadcast 1
- BOOTP broadcast 2
- BOOTP broadcast 3
- BOOTP broadcast 4
- Abort
- DANUBE => tftpboot
- *** ERROR: `ipaddr' not set
- DANUBE => help
- ? - alias for 'help'
- base - print or set address offset
- bdinfo - print Board Info structure
- boot - boot default, i.e., run 'bootcmd'
- bootd - boot default, i.e., run 'bootcmd'
- bootm - boot application image from memory
- bootp - boot image via network using BOOTP/TFTP protocol
- cmp - memory compare
- cp - memory copy
- crc32 - checksum calculation
- dhcp - boot image via network using DHCP/TFTP protocol
- echo - echo args to console
- editenv - edit environment variable
- erase - erase FLASH memory
- flinfo - print FLASH memory information
- fsinfo - print information about filesystems
- fsload - load binary file from a filesystem image
- go - start application at address 'addr'
- help - print online help
- httpd - httpd - start webserver
- iminfo - print header information for application image
- itest - return true/false on integer compare
- loop - infinite loop on address range
- ls - list files in a directory (default /)
- md - memory display
- mii - MII utility commands
- mm - memory modify (auto-incrementing address)
- mtest - simple RAM read/write test
- mw - memory write (fill)
- nm - memory modify (constant address)
- ping - send ICMP ECHO_REQUEST to network host
- printenv- print environment variables
- protect - enable or disable FLASH write protection
- rarpboot- boot image via network using RARP/TFTP protocol
- reset - Perform RESET of the CPU
- run - run commands in an environment variable
- setenv - set environment variables
- sleep - delay execution for some time
- sntp - synchronize RTC via network
- source - run script from memory
- tftpboot- boot image via network using TFTP protocol
- version - print monitor version
- DANUBE => tftpboot
- *** ERROR: `ipaddr' not set
- DANUBE => printenv
- bootcmd=run flash_flash
- bootdelay=5
- baudrate=115200
- loads_echo=
- preboot=echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo
- ram_addr=0x80500000
- kernel_addr=0xb0080000
- ipaddr=192.168.1.1
- ethaddr=00:01:02:03:04:05
- serverip=192.168.1.110
- rootpath=/export
- mtdparts=mtdparts=ifx-nor:448k(uboot)ro,64k(uboot_env)ro,64k(kernel),-(rootfs)
- flashargs=setenv bootargs rootfstype=squashfs,jffs2
- nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}
- addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off
- addmisc=setenv bootargs ${bootargs} init=/etc/preinit console=ttyS1,115200 ethaddr=${ethaddr} ${mtdparts}
- flash_flash=run flashargs addip addmisc;bootm ${kernel_addr}
- flash_nfs=run nfsargs addip addmisc;bootm ${kernel_addr}
- net_flash=run load_kernel flashargs addip addmisc;bootm ${ram_addr}
- net_nfs=run load_kernel nfsargs addip addmisc;bootm ${ram_addr}
- load_kernel=tftp ${ram_addr} ${tftppath}openwrt-ifxmips-uImage
- update_uboot=tftp 0x80500000 ${tftppath}u-boot.bin;era 0xb0020180 +${filesize};cp.b 0x80500000 0xb0020180 ${filesize}
- update_openwrt=tftp ${ram_addr} ${tftppath}openwrt-ifxmips-squashfs.image;era ${kernel_addr} +${filesize};cp.b ${ram_addr} ${kernel_addr} ${filesize}
- stdin=serial
- stdout=serial
- stderr=serial
- ethact=lq_cpe_eth
- ver=U-Boot 2009.11.1 (May 13 2010 - 06:34:35)
- Environment size: 1378/65532 bytes
- DANUBE =>
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- -- Danube Primary loader --
- Version : 4.1.24.52.12
- Build Profile : sx76x_danube_a
- Build Date : Jun 10 2009 - 17:11:31
- --> Extract primary loader [ OK ]
- --> Validate secondary loader (FLASH) [ OK ]
- -- Danube Secondary loader --
- Version : 4.1.28.52.12
- Build Profile : sx76x_danube_b
- Build Date : Dec 15 2009 - 17:54:55
- --> Extract secondary loader [ OK ]
- --> Press enter to activate cli [ 00 ]
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x > printenv
- bootcmd=run flash_flash
- bootdelay=0
- baudrate=115200
- preboot=echo;echo Type "run flash_nfs" to mount root filesystem over NFS;echo
- hwboardid=sx76x-08-32
- bootstrap=1
- console_dev=ttyS1
- keep_magic=on
- netdev=eth0
- ramargs=setenv bootargs root=/dev/ram rw
- addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname):$(netdev):off
- ramdisk_addr=B0100000
- flash_self=run ramargs addip addmisc;bootm $(kernel_addr) $(ramdisk_addr)
- bootfile=runtime.img
- primary_boot_file=primary_boot.img
- secondary_boot_file=secondary_boot.img
- runtime_file=runtime.img
- flashargs=setenv bootargs root=/dev/mtdblock1 rootfstype=squashfs
- flash_flash=run flashargs addmisc; bootm $(kernel_addr)
- update_primary=tftpboot 80400000 $(primary_boot_file);upgrade primary 80400000 $(filesize) 0
- update_secondary=tftpboot 80400000 $(secondary_boot_file);upgrade secondary 80400000 $(filesize) 0
- update_runtime=tftpboot 80400000 $(runtime_file);upgrade runtime 80400000 $(filesize) 0
- reset_nvram=erase 0xB000E000 0xB000EBFF 1
- addmisc=setenv bootargs $(bootargs) ethaddr=$(ethaddr) panic=1
- tftp_RootDir=tftpboot
- tftp_DeviceDir=porta_danube
- tftp_Rootfspath=root
- kernelfile=uImage
- nfsargs=setenv bootargs root=/dev/nfs rw
- add_nfsrootfs=setenv bootargs $(bootargs) nfsroot=/$(tftp_RootDir)/$(tftp_DeviceDir)/$(tftp_Rootfspath)
- flash_nfs=run nfsargs add_nfsrootfs addip addmisc;bootm $(kernel_addr)
- nfs_flash=tftp 0x80400000 $(kernelfile);run flashargs addip addmisc;bootm 0x80400000
- nfs_nfs=tftp 0x80400000 $(kernelfile);run nfsargs add_nfsrootfs addip addmisc;bootm 0x80400000
- silent=0
- rnd_num=
- hwid=Q706-B731
- ethcnt=8
- boardid=sx763
- usbpower=1
- platform_type=2
- desc=CT0130000000007280810
- ethaddr=XX:XX:XX:XX:XX:XX
- customer=0
- default_variant=ethernet
- primary_version=v4.1.24.52.12
- filesize=30180
- gatewayip=192.168.2.1
- ipaddr=192.168.2.1
- serverip=192.168.2.16
- variant=ethernet
- options=2
- validate_images=0
- stdin=serial
- stdout=serial
- stderr=serial
- Environment size: 1932/3068 bytes
- sx76x > help
- base - print or set address offset
- bootm - boot application image from memory
- bootp - boot image via network using BootP/TFTP protocol
- bootd - boot default, i.e., run 'bootcmd'
- cmp - memory compare
- cp - memory copy
- crc32 - checksum calculation
- erase - erase FLASH memory
- flinfo - print FLASH memory information
- go - start application at address 'addr'
- help - print online help
- loop - infinite loop on address range
- md - memory display
- mm - memory modify (auto-incrementing)
- mtest - simple RAM test
- mw - memory write (fill)
- nm - memory modify (constant address)
- printenv- print environment variables
- protect - enable or disable FLASH write protection
- rarpboot- boot image via network using RARP/TFTP protocol
- reset - Perform RESET of the CPU
- run - run commands in an environment variable
- saveenv - save environment variables to persistent storage
- setenv - set environment variables
- tftpboot- boot image via network using TFTP protocol
- and env variables ipaddr and serverip
- upgrade - data_block_name srcAddr srcLen 0/1
- ? - alias for 'help'
- sx76x > setenv bootcmd go 0xb0020180
- sx76x > printenv
- bootdelay=0
- baudrate=115200
- preboot=echo;echo Type "run flash_nfs" to mount root filesystem over NFS;echo
- hwboardid=sx76x-08-32
- bootstrap=1
- console_dev=ttyS1
- keep_magic=on
- netdev=eth0
- ramargs=setenv bootargs root=/dev/ram rw
- addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname):$(netdev):off
- ramdisk_addr=B0100000
- flash_self=run ramargs addip addmisc;bootm $(kernel_addr) $(ramdisk_addr)
- bootfile=runtime.img
- primary_boot_file=primary_boot.img
- secondary_boot_file=secondary_boot.img
- runtime_file=runtime.img
- flashargs=setenv bootargs root=/dev/mtdblock1 rootfstype=squashfs
- flash_flash=run flashargs addmisc; bootm $(kernel_addr)
- update_primary=tftpboot 80400000 $(primary_boot_file);upgrade primary 80400000 $(filesize) 0
- update_secondary=tftpboot 80400000 $(secondary_boot_file);upgrade secondary 80400000 $(filesize) 0
- update_runtime=tftpboot 80400000 $(runtime_file);upgrade runtime 80400000 $(filesize) 0
- reset_nvram=erase 0xB000E000 0xB000EBFF 1
- addmisc=setenv bootargs $(bootargs) ethaddr=$(ethaddr) panic=1
- tftp_RootDir=tftpboot
- tftp_DeviceDir=porta_danube
- tftp_Rootfspath=root
- kernelfile=uImage
- nfsargs=setenv bootargs root=/dev/nfs rw
- add_nfsrootfs=setenv bootargs $(bootargs) nfsroot=/$(tftp_RootDir)/$(tftp_DeviceDir)/$(tftp_Rootfspath)
- flash_nfs=run nfsargs add_nfsrootfs addip addmisc;bootm $(kernel_addr)
- nfs_flash=tftp 0x80400000 $(kernelfile);run flashargs addip addmisc;bootm 0x80400000
- nfs_nfs=tftp 0x80400000 $(kernelfile);run nfsargs add_nfsrootfs addip addmisc;bootm 0x80400000
- silent=0
- rnd_num=
- hwid=Q706-B731
- ethcnt=8
- boardid=sx763
- usbpower=1
- platform_type=2
- desc=CT0130000000007280810
- ethaddr=XX:XX:XX:XX:XX:XX
- customer=0
- default_variant=ethernet
- primary_version=v4.1.24.52.12
- filesize=30180
- gatewayip=192.168.2.1
- ipaddr=192.168.2.1
- serverip=192.168.2.16
- variant=ethernet
- options=2
- validate_images=0
- stdin=serial
- stdout=serial
- stderr=serial
- bootcmd=go 0xb0020180
- Environment size: 1930/3068 bytes
- sx76x > saveenv
- Saving Environment to Flash...
- Erasing flash...done
- Writing flash... done
- sx76x > reboot
- Unknown command 'reboot' - try 'help'
- sx76x >
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- -- Danube Primary loader --
- Version : 4.1.24.52.12
- Build Profile : sx76x_danube_a
- Build Date : Jun 10 2009 - 17:11:31
- --> Extract primary loader [ OK ]
- --> Validate secondary loader (FLASH) [ OK ]
- -- Danube Secondary loader --
- Version : 4.1.28.52.12
- Build Profile : sx76x_danube_b
- Build Date : Dec 15 2009 - 17:54:55
- --> Extract secondary loader [ OK ]
- --> Press enter to activate cli [ 00 ]
- ## Starting application at 0xB0020180 ...
- U-Boot 2009.11.1 (May 13 2010 - 06:34:35)
- Board: unknown, chip part number 0x12B V1.3, DDR Speed 166 MHz, CPU Speed 333 MHz
- DRAM: 32 MB
- Flash: 8 MB
- *** Warning - bad CRC, using default environment
- Net: lq_cpe_eth
- Type "run flash_nfs" to mount root filesystem over NFS
- Hit any key to stop autoboot: 0
- DANUBE => setenv bootcmd flash_flash
- DANUBE => printenv
- bootdelay=5
- baudrate=115200
- loads_echo=
- preboot=echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo
- ram_addr=0x80500000
- kernel_addr=0xb0080000
- ipaddr=192.168.1.1
- ethaddr=00:01:02:03:04:05
- serverip=192.168.1.110
- rootpath=/export
- mtdparts=mtdparts=ifx-nor:448k(uboot)ro,64k(uboot_env)ro,64k(kernel),-(rootfs)
- flashargs=setenv bootargs rootfstype=squashfs,jffs2
- nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}
- addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off
- addmisc=setenv bootargs ${bootargs} init=/etc/preinit console=ttyS1,115200 ethaddr=${ethaddr} ${mtdparts}
- flash_flash=run flashargs addip addmisc;bootm ${kernel_addr}
- flash_nfs=run nfsargs addip addmisc;bootm ${kernel_addr}
- net_flash=run load_kernel flashargs addip addmisc;bootm ${ram_addr}
- net_nfs=run load_kernel nfsargs addip addmisc;bootm ${ram_addr}
- load_kernel=tftp ${ram_addr} ${tftppath}openwrt-ifxmips-uImage
- update_uboot=tftp 0x80500000 ${tftppath}u-boot.bin;era 0xb0020180 +${filesize};cp.b 0x80500000 0xb0020180 ${filesize}
- update_openwrt=tftp ${ram_addr} ${tftppath}openwrt-ifxmips-squashfs.image;era ${kernel_addr} +${filesize};cp.b ${ram_addr} ${kernel_addr} ${filesize}
- stdin=serial
- stdout=serial
- stderr=serial
- ethact=lq_cpe_eth
- ver=U-Boot 2009.11.1 (May 13 2010 - 06:34:35)
- bootcmd=flash_flash
- Environment size: 1374/65532 bytes
- DANUBE =>
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- -- Danube Primary loader --
- Version : 4.1.24.52.12
- Build Profile : sx76x_danube_a
- Build Date : Jun 10 2009 - 17:11:31
- --> Extract primary loader [ OK ]
- --> Validate secondary loader (FLASH) [ OK ]
- -- Danube Secondary loader --
- Version : 4.1.28.52.12
- Build Profile : sx76x_danube_b
- Build Date : Dec 15 2009 - 17:54:55
- --> Extract secondary loader [ OK ]
- --> Press enter to activate cli [ 00 ]
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x > go 0xB0020180
- ## Starting application at 0xB0020180 ...
- U-Boot 2009.11.1 (May 13 2010 - 06:34:35)
- Board: unknown, chip part number 0x12B V1.3, DDR Speed 166 MHz, CPU Speed 333 MHz
- DRAM: 32 MB
- Flash: 8 MB
- *** Warning - bad CRC, using default environment
- Net: lq_cpe_eth
- Type "run flash_nfs" to mount root filesystem over NFS
- Hit any key to stop autoboot: 0
- DANUBE => printenv
- bootcmd=run flash_flash
- bootdelay=5
- baudrate=115200
- loads_echo=
- preboot=echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo
- ram_addr=0x80500000
- kernel_addr=0xb0080000
- ipaddr=192.168.1.1
- ethaddr=00:01:02:03:04:05
- serverip=192.168.1.110
- rootpath=/export
- mtdparts=mtdparts=ifx-nor:448k(uboot)ro,64k(uboot_env)ro,64k(kernel),-(rootfs)
- flashargs=setenv bootargs rootfstype=squashfs,jffs2
- nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}
- addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off
- addmisc=setenv bootargs ${bootargs} init=/etc/preinit console=ttyS1,115200 ethaddr=${ethaddr} ${mtdparts}
- flash_flash=run flashargs addip addmisc;bootm ${kernel_addr}
- flash_nfs=run nfsargs addip addmisc;bootm ${kernel_addr}
- net_flash=run load_kernel flashargs addip addmisc;bootm ${ram_addr}
- net_nfs=run load_kernel nfsargs addip addmisc;bootm ${ram_addr}
- load_kernel=tftp ${ram_addr} ${tftppath}openwrt-ifxmips-uImage
- update_uboot=tftp 0x80500000 ${tftppath}u-boot.bin;era 0xb0020180 +${filesize};cp.b 0x80500000 0xb0020180 ${filesize}
- update_openwrt=tftp ${ram_addr} ${tftppath}openwrt-ifxmips-squashfs.image;era ${kernel_addr} +${filesize};cp.b ${ram_addr} ${kernel_addr} ${filesize}
- stdin=serial
- stdout=serial
- stderr=serial
- ethact=lq_cpe_eth
- ver=U-Boot 2009.11.1 (May 13 2010 - 06:34:35)
- Environment size: 1378/65532 bytes
- DANUBE =>
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- -- Danube Primary loader --
- Version : 4.1.24.52.12
- Build Profile : sx76x_danube_a
- Build Date : Jun 10 2009 - 17:11:31
- --> Extract primary loader [ OK ]
- --> Validate secondary loader (FLASH) [ OK ]
- -- Danube Secondary loader --
- Version : 4.1.28.52.12
- Build Profile : sx76x_danube_b
- Build Date : Dec 15 2009 - 17:54:55
- --> Extract secondary loader [ OK ]
- --> Press enter to activate cli [ 00 ]
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x > printenv
- bootdelay=0
- baudrate=115200
- preboot=echo;echo Type "run flash_nfs" to mount root filesystem over NFS;echo
- hwboardid=sx76x-08-32
- bootstrap=1
- console_dev=ttyS1
- keep_magic=on
- netdev=eth0
- ramargs=setenv bootargs root=/dev/ram rw
- addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname):$(netdev):off
- ramdisk_addr=B0100000
- flash_self=run ramargs addip addmisc;bootm $(kernel_addr) $(ramdisk_addr)
- bootfile=runtime.img
- primary_boot_file=primary_boot.img
- secondary_boot_file=secondary_boot.img
- runtime_file=runtime.img
- flashargs=setenv bootargs root=/dev/mtdblock1 rootfstype=squashfs
- flash_flash=run flashargs addmisc; bootm $(kernel_addr)
- update_primary=tftpboot 80400000 $(primary_boot_file);upgrade primary 80400000 $(filesize) 0
- update_secondary=tftpboot 80400000 $(secondary_boot_file);upgrade secondary 80400000 $(filesize) 0
- update_runtime=tftpboot 80400000 $(runtime_file);upgrade runtime 80400000 $(filesize) 0
- reset_nvram=erase 0xB000E000 0xB000EBFF 1
- addmisc=setenv bootargs $(bootargs) ethaddr=$(ethaddr) panic=1
- tftp_RootDir=tftpboot
- tftp_DeviceDir=porta_danube
- tftp_Rootfspath=root
- kernelfile=uImage
- nfsargs=setenv bootargs root=/dev/nfs rw
- add_nfsrootfs=setenv bootargs $(bootargs) nfsroot=/$(tftp_RootDir)/$(tftp_DeviceDir)/$(tftp_Rootfspath)
- flash_nfs=run nfsargs add_nfsrootfs addip addmisc;bootm $(kernel_addr)
- nfs_flash=tftp 0x80400000 $(kernelfile);run flashargs addip addmisc;bootm 0x80400000
- nfs_nfs=tftp 0x80400000 $(kernelfile);run nfsargs add_nfsrootfs addip addmisc;bootm 0x80400000
- silent=0
- rnd_num=
- hwid=Q706-B731
- ethcnt=8
- boardid=sx763
- usbpower=1
- platform_type=2
- desc=CT0130000000007280810
- ethaddr=XX:XX:XX:XX:XX:XX
- customer=0
- default_variant=ethernet
- primary_version=v4.1.24.52.12
- filesize=30180
- gatewayip=192.168.2.1
- ipaddr=192.168.2.1
- serverip=192.168.2.16
- variant=ethernet
- options=2
- validate_images=0
- bootcmd=go 0xb0020180
- stdin=serial
- stdout=serial
- stderr=serial
- Environment size: 1930/3068 bytes
- sx76x > setenv bootcmd flash_flash
- sx76x > printenv
- bootdelay=0
- baudrate=115200
- preboot=echo;echo Type "run flash_nfs" to mount root filesystem over NFS;echo
- hwboardid=sx76x-08-32
- bootstrap=1
- console_dev=ttyS1
- keep_magic=on
- netdev=eth0
- ramargs=setenv bootargs root=/dev/ram rw
- addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname):$(netdev):off
- ramdisk_addr=B0100000
- flash_self=run ramargs addip addmisc;bootm $(kernel_addr) $(ramdisk_addr)
- bootfile=runtime.img
- primary_boot_file=primary_boot.img
- secondary_boot_file=secondary_boot.img
- runtime_file=runtime.img
- flashargs=setenv bootargs root=/dev/mtdblock1 rootfstype=squashfs
- flash_flash=run flashargs addmisc; bootm $(kernel_addr)
- update_primary=tftpboot 80400000 $(primary_boot_file);upgrade primary 80400000 $(filesize) 0
- update_secondary=tftpboot 80400000 $(secondary_boot_file);upgrade secondary 80400000 $(filesize) 0
- update_runtime=tftpboot 80400000 $(runtime_file);upgrade runtime 80400000 $(filesize) 0
- reset_nvram=erase 0xB000E000 0xB000EBFF 1
- addmisc=setenv bootargs $(bootargs) ethaddr=$(ethaddr) panic=1
- tftp_RootDir=tftpboot
- tftp_DeviceDir=porta_danube
- tftp_Rootfspath=root
- kernelfile=uImage
- nfsargs=setenv bootargs root=/dev/nfs rw
- add_nfsrootfs=setenv bootargs $(bootargs) nfsroot=/$(tftp_RootDir)/$(tftp_DeviceDir)/$(tftp_Rootfspath)
- flash_nfs=run nfsargs add_nfsrootfs addip addmisc;bootm $(kernel_addr)
- nfs_flash=tftp 0x80400000 $(kernelfile);run flashargs addip addmisc;bootm 0x80400000
- nfs_nfs=tftp 0x80400000 $(kernelfile);run nfsargs add_nfsrootfs addip addmisc;bootm 0x80400000
- silent=0
- rnd_num=
- hwid=Q706-B731
- ethcnt=8
- boardid=sx763
- usbpower=1
- platform_type=2
- desc=CT0130000000007280810
- ethaddr=XX:XX:XX:XX:XX:XX
- customer=0
- default_variant=ethernet
- primary_version=v4.1.24.52.12
- filesize=30180
- gatewayip=192.168.2.1
- ipaddr=192.168.2.1
- serverip=192.168.2.16
- variant=ethernet
- options=2
- validate_images=0
- stdin=serial
- stdout=serial
- stderr=serial
- bootcmd=flash_flash
- Environment size: 1928/3068 bytes
- sx76x > saveenv
- Saving Environment to Flash...
- Erasing flash...done
- Writing flash... done
- sx76x >
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- -- Danube Primary loader --
- Version : 4.1.24.52.12
- Build Profile : sx76x_danube_a
- Build Date : Jun 10 2009 - 17:11:31
- --> Extract primary loader [ OK ]
- --> Validate secondary loader (FLASH) [ OK ]
- -- Danube Secondary loader --
- Version : 4.1.28.52.12
- Build Profile : sx76x_danube_b
- Build Date : Dec 15 2009 - 17:54:55
- --> Extract secondary loader [ OK ]
- --> Press enter to activate cli [ 00 ]
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x >
- sx76x > run update_runtime
- TFTP server 192.168.2.16; our IP 192.168.2.1
- Filename 'runtime.img'.
- Load address: 0x80400000
- Loading: #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- ######################################
- done
- Bytes transferred = 6516740 (637004 hex)
- --> Start flashing runtime image...
- Performing update: ...................................................
- .......... done
- Update: done
- sx76x >
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- -- Danube Primary loader --
- Version : 4.1.24.52.12
- Build Profile : sx76x_danube_a
- Build Date : Jun 10 2009 - 17:11:31
- --> Extract primary loader [ OK ]
- --> Validate secondary loader (FLASH) [ OK ]
- -- Danube Secondary loader --
- Version : 4.1.28.52.12
- Build Profile : sx76x_danube_b
- Build Date : Dec 15 2009 - 17:54:55
- --> Extract secondary loader [ OK ]
- --> Press enter to activate cli [ 00 ]
- Unknown command 'flash_flash' - try 'help'
- sx76x > printenv
- bootdelay=0
- baudrate=115200
- preboot=echo;echo Type "run flash_nfs" to mount root filesystem over NFS;echo
- hwboardid=sx76x-08-32
- bootstrap=1
- console_dev=ttyS1
- keep_magic=on
- netdev=eth0
- ramargs=setenv bootargs root=/dev/ram rw
- addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname):$(netdev):off
- ramdisk_addr=B0100000
- flash_self=run ramargs addip addmisc;bootm $(kernel_addr) $(ramdisk_addr)
- bootfile=runtime.img
- primary_boot_file=primary_boot.img
- secondary_boot_file=secondary_boot.img
- runtime_file=runtime.img
- flashargs=setenv bootargs root=/dev/mtdblock1 rootfstype=squashfs
- flash_flash=run flashargs addmisc; bootm $(kernel_addr)
- update_primary=tftpboot 80400000 $(primary_boot_file);upgrade primary 80400000 $(filesize) 0
- update_secondary=tftpboot 80400000 $(secondary_boot_file);upgrade secondary 80400000 $(filesize) 0
- update_runtime=tftpboot 80400000 $(runtime_file);upgrade runtime 80400000 $(filesize) 0
- reset_nvram=erase 0xB000E000 0xB000EBFF 1
- addmisc=setenv bootargs $(bootargs) ethaddr=$(ethaddr) panic=1
- tftp_RootDir=tftpboot
- tftp_DeviceDir=porta_danube
- tftp_Rootfspath=root
- kernelfile=uImage
- nfsargs=setenv bootargs root=/dev/nfs rw
- add_nfsrootfs=setenv bootargs $(bootargs) nfsroot=/$(tftp_RootDir)/$(tftp_DeviceDir)/$(tftp_Rootfspath)
- flash_nfs=run nfsargs add_nfsrootfs addip addmisc;bootm $(kernel_addr)
- nfs_flash=tftp 0x80400000 $(kernelfile);run flashargs addip addmisc;bootm 0x80400000
- nfs_nfs=tftp 0x80400000 $(kernelfile);run nfsargs add_nfsrootfs addip addmisc;bootm 0x80400000
- silent=0
- rnd_num=
- hwid=Q706-B731
- ethcnt=8
- boardid=sx763
- usbpower=1
- platform_type=2
- desc=CT0130000000007280810
- ethaddr=XX:XX:XX:XX:XX:XX
- customer=0
- default_variant=ethernet
- primary_version=v4.1.24.52.12
- filesize=30180
- gatewayip=192.168.2.1
- ipaddr=192.168.2.1
- serverip=192.168.2.16
- variant=ethernet
- options=2
- validate_images=0
- bootcmd=flash_flash
- stdin=serial
- stdout=serial
- stderr=serial
- Environment size: 1928/3068 bytes
- sx76x > help
- base - print or set address offset
- bootm - boot application image from memory
- bootp - boot image via network using BootP/TFTP protocol
- bootd - boot default, i.e., run 'bootcmd'
- cmp - memory compare
- cp - memory copy
- crc32 - checksum calculation
- erase - erase FLASH memory
- flinfo - print FLASH memory information
- go - start application at address 'addr'
- help - print online help
- loop - infinite loop on address range
- md - memory display
- mm - memory modify (auto-incrementing)
- mtest - simple RAM test
- mw - memory write (fill)
- nm - memory modify (constant address)
- printenv- print environment variables
- protect - enable or disable FLASH write protection
- rarpboot- boot image via network using RARP/TFTP protocol
- reset - Perform RESET of the CPU
- run - run commands in an environment variable
- saveenv - save environment variables to persistent storage
- setenv - set environment variables
- tftpboot- boot image via network using TFTP protocol
- and env variables ipaddr and serverip
- upgrade - data_block_name srcAddr srcLen 0/1
- ? - alias for 'help'
- sx76x > setenv bootcmd run flash_flash
- sx76x > printenv
- bootdelay=0
- baudrate=115200
- preboot=echo;echo Type "run flash_nfs" to mount root filesystem over NFS;echo
- hwboardid=sx76x-08-32
- bootstrap=1
- console_dev=ttyS1
- keep_magic=on
- netdev=eth0
- ramargs=setenv bootargs root=/dev/ram rw
- addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname):$(netdev):off
- ramdisk_addr=B0100000
- flash_self=run ramargs addip addmisc;bootm $(kernel_addr) $(ramdisk_addr)
- bootfile=runtime.img
- primary_boot_file=primary_boot.img
- secondary_boot_file=secondary_boot.img
- runtime_file=runtime.img
- flashargs=setenv bootargs root=/dev/mtdblock1 rootfstype=squashfs
- flash_flash=run flashargs addmisc; bootm $(kernel_addr)
- update_primary=tftpboot 80400000 $(primary_boot_file);upgrade primary 80400000 $(filesize) 0
- update_secondary=tftpboot 80400000 $(secondary_boot_file);upgrade secondary 80400000 $(filesize) 0
- update_runtime=tftpboot 80400000 $(runtime_file);upgrade runtime 80400000 $(filesize) 0
- reset_nvram=erase 0xB000E000 0xB000EBFF 1
- addmisc=setenv bootargs $(bootargs) ethaddr=$(ethaddr) panic=1
- tftp_RootDir=tftpboot
- tftp_DeviceDir=porta_danube
- tftp_Rootfspath=root
- kernelfile=uImage
- nfsargs=setenv bootargs root=/dev/nfs rw
- add_nfsrootfs=setenv bootargs $(bootargs) nfsroot=/$(tftp_RootDir)/$(tftp_DeviceDir)/$(tftp_Rootfspath)
- flash_nfs=run nfsargs add_nfsrootfs addip addmisc;bootm $(kernel_addr)
- nfs_flash=tftp 0x80400000 $(kernelfile);run flashargs addip addmisc;bootm 0x80400000
- nfs_nfs=tftp 0x80400000 $(kernelfile);run nfsargs add_nfsrootfs addip addmisc;bootm 0x80400000
- silent=0
- rnd_num=
- hwid=Q706-B731
- ethcnt=8
- boardid=sx763
- usbpower=1
- platform_type=2
- desc=CT0130000000007280810
- ethaddr=XX:XX:XX:XX:XX:XX
- customer=0
- default_variant=ethernet
- primary_version=v4.1.24.52.12
- filesize=30180
- gatewayip=192.168.2.1
- ipaddr=192.168.2.1
- serverip=192.168.2.16
- variant=ethernet
- options=2
- validate_images=0
- stdin=serial
- stdout=serial
- stderr=serial
- bootcmd=run flash_flash
- Environment size: 1932/3068 bytes
- sx76x > saveanv
- Saving Environment to Flash...
- Erasing flash...done
- Writing flash... done
- sx76x >
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- ROM VER: 1.0.3
- CFG 01
- Read EEPROMX
- X
- SHC Danube-External-Flash-Boot - Version V1.2
- Mem-config:
- Flash: 8MB- 8MBx1
- Ram: 32MB-32MBx1
- Low level dbg is active...
- CPU0
- MEMS
- -- Danube Primary loader --
- Version : 4.1.24.52.12
- Build Profile : sx76x_danube_a
- Build Date : Jun 10 2009 - 17:11:31
- --> Extract primary loader [ OK ]
- --> Validate secondary loader (FLASH) [ OK ]
- -- Danube Secondary loader --
- Version : 4.1.28.52.12
- Build Profile : sx76x_danube_b
- Build Date : Dec 15 2009 - 17:54:55
- --> Extract secondary loader [ OK ]
- --> Press enter to activate cli [ 00 ]
- --> Validate runtime image (FLASH) [ OK ]
- --> Extracting runtime [ OK ]
- Starting...
- memsize=32
- flash_start=0xb0000000
- flash_size=8388608 (0x800000)
- reset_sregs(rcu_stat,rcu_stat_sr)=0x20260008,0x20267FFC
- hwmem_size=0x02000000
- free_end=0x01f00000
- Will reserve A"
- 0x0000e000-0x00010000 : "nvram"
- 0x00700000-0x00720000 : "oops"
- mtdoops: Attached to MTD device 4
- Initializing Cryptographic API
- Infineon DEU initialization.
- deu_init(): calling ifxdeu_init_aes()
- ifxdeu initialize!
- Using Infineon DEU for AES algorithm (multiblock).
- deu_init(): calling ifxdeu_init_md5()
- Using Infineon DEU for MD5 algorithm (multiblock).
- ifxdeu nitialized OK. Device Major : 247
- NET4: Linux TCP/IP 1.0 for NET4.0
- IP Protocols: ICMP, UDP, TCP, IGMP
- IP: routing cache hash table of 512 buckets, 4Kbytes
- TCP: Hash tables configured (established 2048 bind 4096)
- Linux IP multicast router 0.06 plus PIM-SM
- Netfilter messages via NETLINK v0.12.
- ip_conntrack version 2.1 (248 buckets, 1984 max) - 664 bytes per conntrack
- ip_conntrack_pptp version 1.9 loaded
- ip_conntrack_rtsp v0.01 loading
- ip_nat_pptp version 1.5 loaded
- ip_nat_rtsp v0.01 loading
- ip_tables: (C) 2000-2002 Netfilter core team
- netfilter PSD loaded - (c) astaro AG
- NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
- NET4: Ethernet Bridge 008 for NET4.0
- 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
- All bugs added by David S. Miller <davem@redhat.com>
- Danube Port Initialization
- DANUBE MIPS24KEc MPS mailbox driver, Version 1.1.0
- (c) Copyright 2006, Infineon Technologies AG
- DANUBE_RCU_RST_REQ = 0x10000008
- ifx_mps_reset ready
- IFX_MPS: using proc fs
- VFS: Mounted root (squashfs filesystem) readonly.
- Mounted devfs on /dev
- init started: BusyBox v1.00 (2009.12.15-16:52+0000) multi-call binary
- Starting pid 14, console /dev/ttyS1: '/etc/init.d/rcS'
- Algorithmics/MIPS FPU Emulator v1.5
- mknod: /dev/usb/lp0: No such file or directory
- Using /lib/modules/2.4.31-danube-3.0.5.4-shc-bas83/kernel/drivers/net/admmod.o
- Loading ADM6996 driver...
- 6996I SMI Mode-Chip ID:71023
- Using /lib/modules/2.4.31-danube-3.0.5.4-shc-bas83/hwinfodrv.o
- Warning: lHWINFO: init_hwinfo_module:Got major 244
- HWINFO: init_hwinfo_module:OK
- oading hwinfodrv will taint the kernel: no license
- See http://www.tux.org/lkml/#export-tainted for information about tainted modules
- Using /lib/modules/2.4.31-danube-3.0.5.4-shc-bas83/duslic.o
- @(#)DUSLIC Driver, Version 0.0.2
- (c) Copyright 2004, Infineon Technologies AG
- Using /lib/modules/2.4.31-danube-3.0.5.4-shc-bas83/danube_daa.o
- Warning: loading danube_daa will taint the ker@(#)CPC5621 Driver, Version 0.3.1.1
- (c) Copyright 2004, Infineon Technologies AG
- nel: no license
- See http://www.tux.org/lkml/#export-tainted for information about tainted modules
- Using /lib/modules/2.4.31-danube-3.0.5.4-shc-bas83/drv_tapi.o
- IFX TAPI, version 3.5.2.5, (c) 2007 Infineon Technologies
- Using /lib/modules/2.4.31-danube-3.0.5.4-shc-bas83/drv_vmmc.o
- IFX VMMC device driver, version 1.1.6.5, (c) 2007 Infineon Technologies AG
- Using /lib/modules/2.4.31-danube-3.0.5.4-slgComponentManager created
- Jan 1 00:00:06 Inf <EVENT> scm: 065-00-00 scm::EthernetSwitchADM6996ComponentManager created
- Jan 1 00:00:06 Inf <EVENT> scJan 1 00:00:14 Inf <EVENT> scm: 000-00-00 ioctl error, failed to get hw address for iface(ath-1).
- Jan 1 00:00:14 Inf <EVENT> scm: 000-00-00 ioctl error, failed to get hw address for iface(ath-1).
- Jan 1 00:00:14 Inf <EVENT> scm: 000-00-00 ioctl error, failed to get hw address for iface(ath-1).
- Jan 1 00:00:14 Inf <EVENT> scm: 000-00-00 ioctl error, failed to get hw address for iface(ath-1).
- Jan 1 00:00:17 Inf <EVENT> scm: 000-00-00 UPnP: upnp_param_changed_callback==NULL
- Jan 1 00:00:17 Inf <EVENT> scm: 000-00-00 UPnP: upnp_param_changed_callback==NULL
- Jan 1 00:00:17 Inf <EVENT> scm: 000-00-00 UPnP: upnp_param_changed_callback==NULL
- Jan 1 00:00:17 Inf <EVENT> scm: 017-00-00 Configuring services with settings from /config/system_configfile_f
- Jan 1 00:00:17 Inf <EVENT> scm: 017-00-00 Configuring services with settings from /config/system_configfile_r
- Jan 1 00:00:17 Inf <EVENT> scm: 017-00-00 Provisioning mode = Dormant
- Jan 1 00:00:17 Inf <EVENT> scm: 017-00-00 Provisioning complete
- Jan 1 00:00:18 Inf <EVENT> scm: 014-00-00 Start component 26 (LOGGING)
- om_cpe: local log enabled (fd=8)
- om_cpe: console log enabled (fd=9)
- om_cpe: local log enabled (fd=10)
- om_cpe: console log enabled (fd=11)
- om_cpe: local log enabled (fd=12)
- om_cpe: console log enabled (fd=13)
- om_cpe: local log enabled (fd=14)
- om_cpe: console log enabled (fd=15)
- om_cpe: local log enabled (fd=16)
- om_cpe: console log enabled (fd=17)
- Jan 1 00:00:20 War <EVENT> kernel: Porta WLAN EEPROM driver: v0.3
- Jan 1 00:00:20 War <EVENT> kernel: -> wlan_eesim_write 0x0 4096
- Jan 1 00:00:20 War <EVENT> kernel: wlan_eesim_write ok
- Jan 1 00:00:20 War <EVENT> kernel: Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
- Jan 1 00:00:21 War <EVENT> kernel: Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved
- Jan 1 00:00:21 War <EVENT> kernel: wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
- Jan 1 00:00:21 War <EVENT> kernel: wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
- Jan 1 00:00:21 War <EVENT> kernel: wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
- Jan 1 00:00:21 War <EVENT> kernel: wifi0: mac 7.9 phy 4.5 radio 5.6
- Jan 1 00:00:21 War <EVENT> kernel: wifi0: Use hw queue 1 for WME_AC_BE traffic
- Jan 1 00:00:21 War <EVENT> kernel: wifi0: Use hw queue 0 for WME_AC_BK traffic
- Jan 1 00:00:21 War <EVENT> kernel: wifi0: Use hw queue 2 for WME_AC_VI traffic
- Jan 1 00:00:21 War <EVENT> kernel: wifi0: Use hw queue 3 for WME_AC_VO traffic
- Jan 1 00:00:21 War <EVENT> kernel: wifi0: Use hw queue 8 for CAB traffic
- Jan 1 00:00:21 War <EVENT> kernel: wifi0: Use hw queue 9 for beacons
- Jan 1 00:00:22 War <EVENT> scm: 033-01-00 DhcpComponentManager state==idle (ignore event)
- Jan 1 00:00:23 War <EVENT> scm: 033-01-00 DhcpComponentManager state==idle (ignore event)
- Jan 1 00:00:23 War <EVENT> scm: 033-01-00 DhcpComponentManager state==idle (ignore event)
- Jan 1 00:00:23 War <EVENT> scm: 033-01-00 DhcpComponentManager state==idle (ignore event)
- Jan 1 00:00:24 War <EVENT> scm: 033-01-00 DhcpComponentManager state==idle (ignore event)
- Jan 1 00:00:24 War <EVENT> scm: 033-01-00 DhcpComponentManager state==idle (ignore event)
- Jan 1 00:00:24 War <EVENT> scm: 033-01-00 DhcpComponentManager state==idle (ignore event)
- Jan 1 00:00:25 War <EVENT> scm: 033-01-00 DhcpComponentManager state==idle (ignore event)
- Jan 1 00:00:25 War <EVENT> scm: 032-03-00 DnsComponentManager:processChildEvent ignoring event while not started
- Jan 1 00:00:25 War <EVENT> kernel: eth0.100: Setting MAC address to 00 21 04 9e 16 30.
- Jan 1 00:00:25 War <EVENT> kernel: VLAN (eth0.100): Setting underlying device (eth0) to promiscious mode.
- Jan 1 00:00:25 War <EVENT> scm: 032-03-00 DnsComponentManager:processChildEvent ignoring event while not started
- Jan 1 00:00:25 War <EVENT> scm: 032-03-00 DnsComponentManager:processChildEvent ignoring event while not started
- Jan 1 00:00:25 War <EVENT> scm: 032-03-00 DnsComponentManager:processChildEvent ignoring event while not started
- Jan 1 00:00:25 War <EVENT> scm: 032-03-00 DnsComponentManager:processChildEvent ignoring event while not started
- Jan 1 00:00:25 War <EVENT> scm: 032-03-00 DnsComponentManager:processChildEvent ignoring event while not started
- Jan 1 00:00:25 War <EVENT> scm: 032-03-00 DnsComponentManager:processChildEvent ignoring event while not started
- Jan 1 00:00:25 Err <EVENT> scm: 017-00-00 Received EV_NET_IPSTATUS broadcast: [eth0.100]
- om_cpe: local log enabled (fd=8)
- om_cpe: console log enabled (fd=9)
- om_cpe: local log enabled (fd=10)
- om_cpe: console log enabled (fd=11)
- om_cpe: local log enabled (fd=12)
- om_cpe: console log enabled (fd=13)
- om_cpe: local log enabled (fd=14)
- om_cpe: console log enabled (fd=15)
- om_cpe: local log enabled (fd=16)
- om_cpe: console log enabled (fd=17)
- Jan 1 00:00:27 War <EVENT> scm: 033-01-00 DhcpComponentManager state==idle (ignore event)
- Jan 1 00:00:27 War <EVENT> scm: 032-03-00 DnsComponentManager:processChildEvent ignoring event while not started
- Jan 1 00:00:27 Err <EVENT> scm: 086-00-00 PortTriggering received EV_NET_IPSTATUS
- Jan 1 00:00:27 Err <EVENT> scm: 086-00-00 PortTriggering add NAT rule: 192.168.1.180
- Jan 1 00:00:27 War <EVENT> scm: 032-03-00 DnsComponentManager:processChildEvent ignoring event while not started
- om_cpe: local log enabled (fd=8)
- om_cpe: console log enabled (fd=9)
- om_cpe: local log enabled (fd=10)
- om_cpe: console log enabled (fd=11)
- om_cpe: local log enabled (fd=12)
- om_cpe: console log enabled (fd=13)
- om_cpe: local log enabled (fd=14)
- om_cpe: console log enabled (fd=15)
- om_cpe: local log enabled (fd=16)
- om_cpe: console log enabled (fd=17)
- Jan 1 00:00:28 War <EVENT> scm: 033-01-00 DhcpComponentManager state==idle (ignore event)
- Jan 1 00:00:28 War <EVENT> scm: 032-03-00 DnsComponentManager:processChildEvent ignoring event while not started
- Jan 1 00:00:31 Err <EVENT> scm: 086-00-00 PortTriggering received EV_NET_IPSTATUS
- Jan 1 00:00:31 Err <EVENT> scm: 077-00-00 No response received from iptFix
- Jan 1 00:00:31 Err <EVENT> scm: 077-00-00 cmd[/bin/iptables -D FORWARD -d 224.0.0.0/4 -j ACCEPT] failed with err[256]
- Jan 1 00:00:42 Err <EVENT> scm: 077-00-00 cmd[/bin/iptables -A Access -p $(sh /config/ipp.sh) -m limit --limit 20/minute --limit-burst 9 -j LOG --log-prefix "access control violation: "] failed with err[512]
- Jan 1 00:00:53 Err <EVENT> scm: 077-00-00 cmd[/bin/iptables -A Access -p $(sh /config/ipp.sh) -j DROP] failed with err[512]
- Jan 1 00:00:53 Err <EVENT> scm: 077-00-00 cmd[/bin/iptables -D FORWARD -d 224.0.0.0/4 -j ACCEPT] failed with err[256]
- Jan 1 00:00:53 War <EVENT> scm: 080-01-00 IPTVCm: processChildEvent state==Idle (ignore event)
- Sep 29 20:12:57 Err <EVENT> kernel: devfs_mk_dir(usb): using old entry in dir: 810686c0 ""
- Sep 29 20:12:58 War <EVENT> kernel:
- Sep 29 20:12:58 War <EVENT> kernel:
- Sep 29 20:12:58 War <EVENT> kernel:
- Sep 29 20:12:58 War <EVENT> kernel:
- Sep 29 20:12:58 War <EVENT> kernel: dwc_otg proc initialization okay!
- Sep 29 20:12:59 War <EVENT> kernel: UFSD version 6.15 (Nov 20 2008, 13:57:13)
- Sep 29 20:12:59 War <EVENT> kernel: NTFS read/write support included
- Sep 29 20:12:59 War <EVENT> kernel: Big endian platform
- Sep 29 20:12:59 War <EVENT> kernel: $Id: ufsdvfs.c,v 1.185 2008/11/19 13:42:16 shura Exp $
- Sep 29 20:13:02 War <EVENT> scm: 070-00-00 UPnP: Service is disabled.
- Sep 29 20:13:02 War <EVENT> kernel: ifx_mps_init_gpt_danube()...
- Sep 29 20:13:02 War <EVENT> kernel: ifx_mps_download_firmware()...
- Sep 29 20:13:02 War <EVENT> kernel: DANUBE_RCU_RST_REQ = 0x10000008
- Sep 29 20:13:02 War <EVENT> kernel: ifx_mps_reset ready
- Sep 29 20:13:02 War <EVENT> kernel: ifx_mps_gptc_config_danube()...
- Sep 29 20:13:02 War <EVENT> kernel: ifx_mps_gptc_config_danube() applying GPTC bugfix...
- Sep 29 20:13:02 War <EVENT> kernel: ifx_mps_gptc_config_danube() - calibration done, waited 294 loops!
- Sep 29 20:13:03 War <EVENT> kernel: ok!
- Sep 29 20:13:03 War <EVENT> kernel: Version 11.1.0 up and running...
- Sep 29 20:13:03 Err <EVENT> scm: 050-00-02 not a classification : begin(6)!=IGD.QueueManagement.Classification.
- Sep 29 20:13:03 Err <EVENT> scm: 050-00-02 not a classification : begin()!=IGD.QueueManagement.Classification.
- Sep 29 20:13:03 Err <EVENT> scm: 050-00-02 not a classification : begin()!=IGD.QueueManagement.Classification.
- Sep 29 20:13:03 Err <EVENT> scm: 050-00-02 not a classification : begin()!=IGD.QueueManagement.Classification.
- Sep 29 20:13:04 Err <EVENT> scm: 050-00-02 not a classification : begin(5)!=IGD.QueueManagement.Classification.
- Sep 29 20:13:04 Err <EVENT> scm: 050-00-02 not a classification : begin(4)!=IGD.QueueManagement.Classification.
- Sep 29 20:13:04 Err <EVENT> scm: 050-00-02 not a classification : begin(3)!=IGD.QueueManagement.Classification.
- Sep 29 20:13:04 Err <EVENT> scm: 050-00-02 not a classification : begin(6)!=IGD.QueueManagement.Classification.
- Sep 29 20:13:04 Err <EVENT> scm: 050-00-02 not a classification : begin(5)!=IGD.QueueManagement.Classification.
- Sep 29 20:13:04 Err <EVENT> scm: 050-00-02 not a classification : begin(4)!=IGD.QueueManagement.Classification.
- Sep 29 20:13:04 Err <EVENT> scm: 050-00-02 not a classification : begin(3)!=IGD.QueueManagement.Classification.
- Sep 29 20:13:04 Err <EVENT> scm: 050-00-02 not a classification : begin()!=IGD.QueueManagement.Classification.
- Sep 29 20:13:04 Err <EVENT> scm: 050-00-02 not a classification : begin()!=IGD.QueueManagement.Classification.
- Sep 29 20:13:04 Err <EVENT> scm: 050-00-02 not a classification : begin()!=IGD.QueueManagement.Classification.
- Sep 29 20:13:04 Err <EVENT> scm: 086-00-00 PortTriggering received EV_NET_IPSTATUS
- Sep 29 20:13:04 Err <EVENT> scm: 086-00-00 PortTriggering add NAT rule: 192.168.1.180
- Sep 29 20:13:04 Err <EVENT> scm: 077-00-00 cmd[/bin/iptables -t nat -D PREROUTING -d 192.168.1.180 -j TRIGGER --trigger-type dnat] failed with err[256]
- kernel: Got MODEM_READY_MSG kernel:
- Sep 29 20:13:11 War <EVENT> scm: 103-00-00 rtpsd::Ignoring packet that is not going out or coming in
- Sep 29 20:13:11 War <EVENT> scm: 103-00-00 rtpsd::Ignoring packet that is not going out or coming in
- Sep 29 20:13:11 War <EVENT> scm: 103-00-00 rtpsd::Ignoring packet that is not going out or coming in
- Sep 29 20:13:11 War <EVENT> scm: 103-00-00 rtpsd::Ignoring packet that is not going out or coming in
- Sep 29 20:13:11 War <EVENT> scm: 103-00-00 rtpsd::Ignoring packet that is not going out or coming in
- Sep 29 20:13:11 War <EVENT> scm: 103-00-00 rtpsd::Ignoring packet that is not going out or coming in
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement