Want more features on Pastebin? Sign Up, it's FREE!
Guest

Untitled

By: a guest on Dec 3rd, 2013  |  syntax: None  |  size: 15.15 KB  |  views: 40  |  expires: Never
download  |  raw  |  embed  |  report abuse  |  print
Text below is selected. Please press Ctrl+C to copy to your clipboard. (⌘+C on Mac)
  1.  
  2. U-Boot SPL 2012.10-g6299a25 (Dec 02 2013 - 11:29:49)
  3. OMAP4430 ES2.3
  4. OMAP SD/MMC: 0
  5. reading u-boot.img
  6. reading u-boot.img
  7.  
  8.  
  9. U-Boot 2012.10-g6299a25 (Dec 02 2013 - 11:29:49)
  10.  
  11. CPU  : OMAP4430 ES2.3
  12. Board: duovero
  13. I2C:   ready
  14. DRAM:  1 GiB
  15. MMC:   OMAP SD/MMC: 0
  16. Using default environment
  17.  
  18. In:    serial
  19. Out:   serial
  20. Err:   serial
  21. Net:   smc911x-0
  22. Warning: smc911x-0 using MAC address from net device
  23.  
  24. Hit any key to stop autoboot:  0
  25. reading boot.scr
  26.  
  27. ** Unable to read "boot.scr" from mmc 0:1 **
  28. reading uImage
  29.  
  30. 2944112 bytes read
  31. Booting from mmc0 ...
  32. ## Booting kernel from Legacy Image at 82000000 ...
  33.    Image Name:   Linux-3.6.0
  34.    Image Type:   ARM Linux Kernel Image (uncompressed)
  35.    Data Size:    2944048 Bytes = 2.8 MiB
  36.    Load Address: 80008000
  37.    Entry Point:  80008000
  38.    Verifying Checksum ... OK
  39.    Loading Kernel Image ... OK
  40. OK
  41.  
  42. Starting kernel ...
  43.  
  44. [    0.000000] Booting Linux on physical CPU 0
  45. [    0.000000] Initializing cgroup subsys cpuset
  46. [    0.000000] Initializing cgroup subsys cpu
  47. [    0.000000] Linux version 3.6.0 (scott@hex.jumpnow.it) (gcc version 4.7.2 (GCC) ) #1 SMP Mon Dec 2 11:31:47 EST 2013
  48. [    0.000000] CPU: ARMv7 Processor [411fc093] revision 3 (ARMv7), cr=10c5387d
  49. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  50. [    0.000000] Machine: OMAP4 duovero board
  51. [    0.000000] Reserving 16777216 bytes SDRAM for VRAM
  52. [    0.000000] Memory policy: ECC disabled, Data cache writealloc
  53. [    0.000000] OMAP4430 ES2.3
  54. [    0.000000] PERCPU: Embedded 9 pages/cpu @c0e81000 s12928 r8192 d15744 u36864
  55. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 255744
  56. [    0.000000] Kernel command line: console=ttyO2,115200n8 vram=16M root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait
  57. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  58. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  59. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  60. [    0.000000] allocated 2097152 bytes of page_cgroup
  61. [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  62. [    0.000000] Memory: 743MB 264MB = 1007MB total
  63. [    0.000000] Memory: 1013404k/1013404k available, 35172k reserved, 270336K highmem
  64. [    0.000000] Virtual kernel memory layout:
  65. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  66. [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  67. [    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
  68. [    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
  69. [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  70. [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  71. [    0.000000]       .text : 0xc0008000 - 0xc054e92c   (5403 kB)
  72. [    0.000000]       .init : 0xc054f000 - 0xc058b280   ( 241 kB)
  73. [    0.000000]       .data : 0xc058c000 - 0xc05e9c48   ( 376 kB)
  74. [    0.000000]        .bss : 0xc05e9c6c - 0xc06786b8   ( 571 kB)
  75. [    0.000000] Hierarchical RCU implementation.
  76. [    0.000000] NR_IRQS:474
  77. [    0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
  78. [    0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
  79. [    0.000000] omap_hwmod: sys_32k_ck: missing clockdomain for sys_32k_ck.
  80. [    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  81. [    0.000000] OMAP clocksource: 32k_counter at 32768 Hz
  82. [    0.000000] Console: colour dummy device 80x30
  83. [    0.000305] Calibrating delay loop... 1598.59 BogoMIPS (lpj=6242304)
  84. [    0.070251] pid_max: default: 32768 minimum: 301
  85. [    0.070495] Security Framework initialized
  86. [    0.070617] Mount-cache hash table entries: 512
  87. [    0.072021] Initializing cgroup subsys debug
  88. [    0.072052] Initializing cgroup subsys cpuacct
  89. [    0.072052] Initializing cgroup subsys memory
  90. [    0.072113] Initializing cgroup subsys devices
  91. [    0.072113] Initializing cgroup subsys freezer
  92. [    0.072143] Initializing cgroup subsys perf_event
  93. [    0.072296] CPU: Testing write buffer coherency: ok
  94. [    0.072601] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  95. [    0.072845] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  96. [    0.072967] Setting up static identity map for 0x803a2a30 - 0x803a2a88
  97. [    0.072967] L310 cache controller enabled
  98. [    0.072998] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x7e470000, Cache size: 1048576 B
  99. [    0.076049] CPU1: Booted secondary processor
  100. [    0.143157] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  101. [    0.143188] CPU1: Unknown IPI message 0x0
  102. [    0.143249] Brought up 2 CPUs
  103. [    0.143280] SMP: Total of 2 processors activated (3196.18 BogoMIPS).
  104. [    0.144226] devtmpfs: initialized
  105. [    0.148254] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
  106. [    0.150634] omap_hwmod: cm_core_aon: cannot be enabled for reset (3)
  107. [    0.150634] omap_hwmod: cm_core: cannot be enabled for reset (3)
  108. [    0.152526] dummy:
  109. [    0.152801] NET: Registered protocol family 16
  110. [    0.153900] DMA: preallocated 256 KiB pool for atomic coherent allocations
  111. [    0.154052] GPMC revision 6.0
  112. [    0.154083] gpmc: irq-52 could not claim: err -22
  113. [    0.155487] OMAP GPIO hardware version 0.1
  114. [    0.157104] omap_mux_init: Add partition: #1: core, flags: 2
  115. [    0.158142] omap_mux_init: Add partition: #2: wkup, flags: 2
  116. [    0.159179] _omap_mux_get_by_name: Could not find signal uart1_rx.uart1_rx
  117. [    0.159179] _omap_mux_get_by_name: Could not find signal uart1_rx.uart1_rx
  118. [    0.171997]  usbhs_omap: alias fck already exists
  119. [    0.173645] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  120. [    0.173645] hw-breakpoint: maximum watchpoint size is 4 bytes.
  121. [    0.175842] OMAP DMA hardware revision 0.0
  122. [    0.179992] bio: create slab <bio-0> at 0
  123. [    0.192016] omap-dma-engine omap-dma-engine: OMAP DMA engine driver
  124. [    0.192230] vwlan: 3000 mV
  125. [    0.192413] fixed-dummy:
  126. [    0.192932] SCSI subsystem initialized
  127. [    0.193176] usbcore: registered new interface driver usbfs
  128. [    0.193237] usbcore: registered new interface driver hub
  129. [    0.193359] usbcore: registered new device driver usb
  130. [    0.205718] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 400 kHz
  131. [    0.206115] Skipping twl internal clock init and using bootloader value (unknown osc rate)
  132. [    0.206634] twl 1-0048: PIH (irq 39) chaining IRQs 352..372
  133. [    0.207153] VUSB: 3300 mV normal standby
  134. [    0.409698] twl6030_usb twl6030_usb: Initialized TWL6030 USB module
  135. [    0.409942] vdd_mpu: 500 <--> 1500 mV normal
  136. [    0.410217] vdd_iva: 500 <--> 1500 mV normal
  137. [    0.410430] vdd_core: 500 <--> 1500 mV normal
  138. [    0.410888] V1V8: 1800 mV normal standby
  139. [    0.411163] V2V1: 2100 mV normal standby
  140. [    0.411529] VMMC: 1200 <--> 3000 mV at 3000 mV normal standby
  141. [    0.412048] VPP: 1800 <--> 2500 mV at 1900 mV normal standby
  142. [    0.412628] VCXIO: 1800 mV normal standby
  143. [    0.412658] VCXIO: supplied by V2V1
  144. [    0.413482] VDAC: 1800 mV normal standby
  145. [    0.413513] VDAC: supplied by V2V1
  146. [    0.414154] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby
  147. [    0.414672] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby
  148. [    0.415161] VANA: 2100 mV normal standby
  149. [    0.424438] omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 400 kHz
  150. [    0.440063] omap_i2c omap_i2c.3: bus 3 rev2.4.0 at 100 kHz
  151. [    0.455688] omap_i2c omap_i2c.4: bus 4 rev2.4.0 at 400 kHz
  152. [    0.455871] Linux video capture interface: v2.00
  153. [    0.456207] omap-iommu omap-iommu.0: ducati registered
  154. [    0.456298] omap-iommu omap-iommu.1: tesla registered
  155. [    0.456939] Switching to clocksource 32k_counter
  156. [    0.475952] usbhs_omap usbhs_omap: ehci_logic_fck failed:-2
  157. [    0.476562] NET: Registered protocol family 2
  158. [    0.477264] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  159. [    0.479125] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  160. [    0.480102] TCP: Hash tables configured (established 131072 bind 65536)
  161. [    0.480163] TCP: reno registered
  162. [    0.480194] UDP hash table entries: 512 (order: 2, 16384 bytes)
  163. [    0.480255] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  164. [    0.480621] NET: Registered protocol family 1
  165. [    0.520751] audit: initializing netlink socket (disabled)
  166. [    0.520782] type=2000 audit(0.515:1): initialized
  167. [    0.621185] bounce pool size: 64 pages
  168. [    0.621917] fuse init (API version 7.20)
  169. [    0.622253] msgmni has been set to 1451
  170. [    0.623352] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  171. [    0.623352] io scheduler noop registered
  172. [    0.623382] io scheduler deadline registered (default)
  173. [    0.623413] io scheduler cfq registered
  174. [    0.624114] OMAP DSS rev 4.0
  175. [    0.625732] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
  176. [    0.626098] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
  177. [    0.626403] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
  178. [    1.373260] console [ttyO2] enabled
  179. [    1.377258] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
  180. [    1.392517] brd: module loaded
  181. [    1.399688] loop: module loaded
  182. [    1.406433] smsc911x: Driver version 2008-10-21
  183. [    1.412414] libphy: smsc911x-mdio: probed
  184. [    1.416687] smsc911x smsc911x.0: eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=smsc911x-0:01, irq=-1)
  185. [    1.427612] smsc911x smsc911x.0: eth0: MAC Address: 00:15:c9:29:06:37
  186. [    1.434509] usbcore: registered new interface driver asix
  187. [    1.440216] usbcore: registered new interface driver cdc_ether
  188. [    1.446411] usbcore: registered new interface driver cdc_ncm
  189. [    1.452545] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  190. [    1.459594] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
  191. [    1.465759] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
  192. [    1.503906] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00
  193. [    1.519500] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
  194. [    1.525634] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  195. [    1.532775] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  196. [    1.540374] usb usb1: Product: OMAP-EHCI Host Controller
  197. [    1.545959] usb usb1: Manufacturer: Linux 3.6.0 ehci_hcd
  198. [    1.551544] usb usb1: SerialNumber: ehci-omap.0
  199. [    1.556823] hub 1-0:1.0: USB hub found
  200. [    1.560791] hub 1-0:1.0: 3 ports detected
  201. [    1.565277] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  202. [    1.571868] ohci-omap3 ohci-omap3.0: OMAP3 OHCI Host Controller
  203. [    1.578277] ohci-omap3 ohci-omap3.0: new USB bus registered, assigned bus number 2
  204. [    1.586334] ohci-omap3 ohci-omap3.0: irq 108, io mem 0x4a064800
  205. [    1.672576] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  206. [    1.679718] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  207. [    1.687286] usb usb2: Product: OMAP3 OHCI Host Controller
  208. [    1.692962] usb usb2: Manufacturer: Linux 3.6.0 ohci_hcd
  209. [    1.698516] usb usb2: SerialNumber: ohci-omap3.0
  210. [    1.703918] hub 2-0:1.0: USB hub found
  211. [    1.707885] hub 2-0:1.0: 3 ports detected
  212. [    1.712341] Initializing USB Mass Storage driver...
  213. [    1.717620] usbcore: registered new interface driver usb-storage
  214. [    1.723907] USB Mass Storage support registered.
  215. [    1.728759] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
  216. [    1.735534] musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124
  217. [    1.744323] mousedev: PS/2 mouse device common for all mice
  218. [    1.750610] twl_rtc twl_rtc: Power up reset detected.
  219. [    1.756500] twl_rtc twl_rtc: Enabling TWL-RTC
  220. [    1.763366] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
  221. [    1.770080] i2c /dev entries driver
  222. [    1.774841] cpuidle: using governor ladder
  223. [    1.779144] cpuidle: using governor menu
  224. [    1.783508] omap_hsmmc omap_hsmmc.0: Failed to get debounce clk
  225. [    1.789825] omap-dma-engine omap-dma-engine: allocating channel for 62
  226. [    1.796691] omap-dma-engine omap-dma-engine: allocating channel for 61
  227. [    1.847778] omap_hsmmc omap_hsmmc.4: Failed to get debounce clk
  228. [    1.854003] omap-dma-engine omap-dma-engine: allocating channel for 60
  229. [    1.860870] omap-dma-engine omap-dma-engine: allocating channel for 59
  230. [    1.981719] usbcore: registered new interface driver usbhid
  231. [    1.987579] usbhid: USB HID core driver
  232. [    1.991638] OCR: 0
  233. [    1.991851] oprofile: using arm/armv7-ca9
  234. [    1.998199] TCP: cubic registered
  235. [    2.001708] NET: Registered protocol family 17
  236. [    2.006530] Key type dns_resolver registered
  237. [    2.011108] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  238. [    2.021209] omap_vc_i2c_init: I2C config for vdd_iva does not match other channels (0).
  239. [    2.029449] omap_vc_i2c_init: I2C config for vdd_mpu does not match other channels (0).[    2.038696] Power Management for TI OMAP4.
  240. [    2.043334] ThumbEE CPU extension supported.
  241. [    2.047821] OCR: 0
  242. [    2.047851] Registering SWP/SWPB emulation handler
  243. [    2.053680] registered taskstats version 1
  244. [    2.068511] omapdss error: timeout reading edid
  245. [    2.105529] Console: switching to colour frame buffer device 80x30
  246. [    2.134735] VANA: incomplete constraints, leaving on
  247. [    2.140808] VDAC: incomplete constraints, leaving on
  248. [    2.146606] VUSB: incomplete constraints, leaving on
  249. [    2.152709] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
  250. [    2.161621] Waiting for root device /dev/mmcblk0p2...
  251. [    2.241027] mmc0: host does not support reading read-only switch. assuming write-enable.
  252. [    2.252502] mmc0: new high speed SDHC card at address aaaa
  253. [    2.258758] mmcblk0: mmc0:aaaa SU04G 3.69 GiB
  254. [    2.273834]  mmcblk0: p1 p2
  255. [    2.485321] kjournald starting.  Commit interval 5 seconds
  256. [    2.487091] EXT3-fs (mmcblk0p2): using internal journal
  257. [    2.488555] EXT3-fs (mmcblk0p2): recovery complete
  258. [    2.488555] EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode
  259. [    2.488616] VFS: Mounted root (ext3 filesystem) on device 179:2.
  260. [    2.490234] devtmpfs: mounted
  261. [    2.490509] Freeing init memory: 240K
  262. INIT: version 2.88 booting
  263. Starting udev
  264. [    2.861785] udevd[93]: starting version 182
  265. ALSA: Restoring mixer settings...
  266. Configuring network interfaces... /usr/sbin/alsactl: load_state:1696: No soundcards found...
  267. [    4.715087] smsc911x smsc911x.0: eth0: SMSC911x/921x identified at 0xf00a6000, IRQ: 204
  268. udhcpc (v1.20.2) started
  269. Sending discover...
  270. Sending discover...
  271. Sending discover...
  272. No lease, failing
  273. Successfully initialized wpa_supplicant
  274. rfkill: Cannot open RFKILL control device
  275. Could not read interface mlan0 flags: No such device
  276. WEXT: Could not set interface 'mlan0' UP
  277. mlan0: Failed to initialize driver interface
  278. Starting rpcbind daemon...[   14.454650] NET: Registered protocol family 10
  279. [   14.460205] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  280. done.
  281. Mon Dec  2 16:49:00 UTC 2013
  282. INIT: Entering runlevel: 5
  283. Starting system message bus: dbus.
  284. Starting OpenBSD Secure Shell server: sshd
  285. done.
  286. Starting ntpd: done
  287. Starting syslogd/klogd: done
  288.  * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
  289.    ...done.
  290. Starting Telephony daemon
  291. Starting Linux NFC daemon
  292.  
  293. Poky 9.0.2 (Yocto Project 1.4 Reference Distro) 1.4.2 duovero ttyO2
  294.  
  295. duovero login:
clone this paste RAW Paste Data