Advertisement
Guest User

Aizan's SMART report

a guest
Jul 8th, 2013
72
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 4.82 KB | None | 0 0
  1. smartctl 5.41 2011-04-06 r3314 [i386-apple-darwin9.8.0] (local build)
  2. Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Device Model:     APPLE HDD HTS547550A9E384
  6. Serial Number:    J2210056GWKX2A
  7. LU WWN Device Id: 5 000cca 715cc893c
  8. Firmware Version: JE3AD70F
  9. User Capacity:    500,107,862,016 bytes [500 GB]
  10. Sector Sizes:     512 bytes logical, 4096 bytes physical
  11. Device is:        Not in smartctl database [for details use: -P showall]
  12. ATA Version is:   8
  13. ATA Standard is:  ATA-8-ACS revision 6
  14. Local Time is:    Tue Jul  9 08:17:40 2013 MYT
  15. SMART support is: Available - device has SMART capability.
  16. SMART support is: Enabled
  17.  
  18. === START OF READ SMART DATA SECTION ===
  19. SMART overall-health self-assessment test result: PASSED
  20.  
  21. General SMART Values:
  22. Offline data collection status:  (0x00) Offline data collection activity
  23.                     was never started.
  24.                     Auto Offline Data Collection: Disabled.
  25. Self-test execution status:      ( 249) Self-test routine in progress...
  26.                     90% of test remaining.
  27. Total time to complete Offline
  28. data collection:        (   45) seconds.
  29. Offline data collection
  30. capabilities:            (0x5b) SMART execute Offline immediate.
  31.                     Auto Offline data collection on/off support.
  32.                     Suspend Offline collection upon new
  33.                     command.
  34.                     Offline surface scan supported.
  35.                     Self-test supported.
  36.                     No Conveyance Self-test supported.
  37.                     Selective Self-test supported.
  38. SMART capabilities:            (0x0003) Saves SMART data before entering
  39.                     power-saving mode.
  40.                     Supports SMART auto save timer.
  41. Error logging capability:        (0x01) Error logging supported.
  42.                     General Purpose Logging supported.
  43. Short self-test routine
  44. recommended polling time:    (   2) minutes.
  45. Extended self-test routine
  46. recommended polling time:    ( 118) minutes.
  47. SCT capabilities:          (0x003d) SCT Status supported.
  48.                     SCT Error Recovery Control supported.
  49.                     SCT Feature Control supported.
  50.                     SCT Data Table supported.
  51.  
  52. SMART Attributes Data Structure revision number: 16
  53. Vendor Specific SMART Attributes with Thresholds:
  54. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  55.   1 Raw_Read_Error_Rate     0x000b   100   100   062    Pre-fail  Always       -       0
  56.   2 Throughput_Performance  0x0005   100   100   040    Pre-fail  Offline      -       0
  57.   3 Spin_Up_Time            0x0007   175   175   033    Pre-fail  Always       -       1
  58.   4 Start_Stop_Count        0x0012   099   099   000    Old_age   Always       -       1607
  59.   5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  60.   7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  61.   8 Seek_Time_Performance   0x0005   100   100   040    Pre-fail  Offline      -       0
  62.   9 Power_On_Hours          0x0012   096   096   000    Old_age   Always       -       2119
  63.  10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
  64.  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       1498
  65. 160 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
  66. 191 G-Sense_Error_Rate      0x000a   099   099   000    Old_age   Always       -       2
  67. 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       416611827723
  68. 193 Load_Cycle_Count        0x0012   086   086   000    Old_age   Always       -       141236
  69. 194 Temperature_Celsius     0x0002   153   153   000    Old_age   Always       -       39 (Min/Max 22/46)
  70. 195 Hardware_ECC_Recovered  0x000a   080   080   000    Old_age   Always       -       3145800
  71. 196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
  72. 197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
  73. 198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
  74. 199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0
  75. 223 Load_Retry_Count        0x000a   100   100   000    Old_age   Always       -       0
  76. 254 Free_Fall_Sensor        0x0032   090   090   000    Old_age   Always       -       2683
  77.  
  78. SMART Error Log Version: 1
  79. No Errors Logged
  80.  
  81. SMART Self-test log structure revision number 1
  82. No self-tests have been logged.  [To run self-tests, use: smartctl -t]
  83.  
  84.  
  85. SMART Selective self-test log data structure revision number 1
  86.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  87.     1        0        0  Not_testing
  88.     2        0        0  Not_testing
  89.     3        0        0  Not_testing
  90.     4        0        0  Not_testing
  91.     5        0        0  Not_testing
  92. Selective self-test flags (0x0):
  93.   After scanning selected spans, do NOT read-scan remainder of disk.
  94. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement