Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <6>[01-01 00:00:00.000] Initializing cgroup subsys cpu
- <5>[01-01 00:00:00.000] Linux version 3.0.101-CM+ (artas182x@iMac-Artur.local) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Tue Jan 7 17:51:29 CET 2014
- <4>[01-01 00:00:00.000] CPU: ARMv7 Processor [411fc093] revision 3 (ARMv7), cr=10c5387d
- <4>[01-01 00:00:00.000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
- <4>[01-01 00:00:00.000] Machine: LGE P760 board
- <6>[01-01 00:00:00.000] bootloader cmdline: mem=1G@0x80000000 init=/init vram=10M,0x87000000 omapfb.vram="0:4M@0x87000000" vmalloc=256M lpj=7839744 chg=32 turnoff=0x7 RGB=0,0,0 prox_cal_data=0
- <6>[01-01 00:00:00.000] androidboot.serialno=015F0FFD1401A014 CRC=0x95353fe8 androidboot.selinux=permissive lge.signed_image=false
- <6>[01-01 00:00:00.000] manipulated cmdline: init=/init vram=10M,0x87000000 omapfb.vram="0:4M@0x87000000" vmalloc=256M lpj=7839744 chg=32 turnoff=0x7 RGB=0,0,0 prox_cal_data=0 androidboot.serialno=015F0FFD1401A014 CRC=0x95353fe8 androidboot.selinux=permissive lge.signed_image=false mem=1G@0x80000000
- <6>[01-01 00:00:00.000] Reserving 10485760 bytes SDRAM for VRAM at address 0x87000000
- <4>[01-01 00:00:00.000] Memory policy: ECC disabled, Data cache writealloc
- <6>[01-01 00:00:00.000] OMAP4430 ES2.3
- <6>[01-01 00:00:00.000] SRAM: Mapped pa 0x4030d000 to va 0xfe40d000 size: 0x1000
- <6>[01-01 00:00:00.000] SMC: Allocated workspace of 0x300000 Bytes at (0xbfd00000)
- <7>[01-01 00:00:00.000] On node 0 totalpages: 221696
- <7>[01-01 00:00:00.000] free_area_init_node: node 0, pgdat c0824ea0, node_mem_map c1084000
- <7>[01-01 00:00:00.000] Normal zone: 1280 pages used for memmap
- <7>[01-01 00:00:00.000] Normal zone: 0 pages reserved
- <7>[01-01 00:00:00.000] Normal zone: 157696 pages, LIFO batch:31
- <7>[01-01 00:00:00.000] HighMem zone: 768 pages used for memmap
- <7>[01-01 00:00:00.000] HighMem zone: 61952 pages, LIFO batch:15
- <6>[01-01 00:00:00.000] PERCPU: Embedded 7 pages/cpu @c1891000 s8128 r8192 d12352 u32768
- <7>[01-01 00:00:00.000] pcpu-alloc: s8128 r8192 d12352 u32768 alloc=8*4096
- <7>[01-01 00:00:00.000] pcpu-alloc: [0] 0 [0] 1
- <4>[01-01 00:00:00.000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 219648
- <5>[01-01 00:00:00.000] Kernel command line: init=/init vram=10M,0x87000000 omapfb.vram="0:4M@0x87000000" vmalloc=256M lpj=7839744 chg=32 turnoff=0x7 RGB=0,0,0 prox_cal_data=0 androidboot.serialno=015F0FFD1401A014 CRC=0x95353fe8 androidboot.selinux=permissive lge.signed_image=false mem=1G@0x80000000
- <4>[01-01 00:00:00.000] ProximitySensor : cal_data = 0
- <6>[01-01 00:00:00.000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- <6>[01-01 00:00:00.000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- <6>[01-01 00:00:00.000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- <6>[01-01 00:00:00.000] Memory: 112MB 333MB 58MB 289MB 74MB = 866MB total
- <5>[01-01 00:00:00.000] Memory: 868252k/868252k available, 180324k reserved, 250880K highmem
- <5>[01-01 00:00:00.000] Virtual kernel memory layout:
- <5>[01-01 00:00:00.000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- <5>[01-01 00:00:00.000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- <5>[01-01 00:00:00.000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
- <5>[01-01 00:00:00.000] vmalloc : 0xe8800000 - 0xf8000000 ( 248 MB)
- <5>[01-01 00:00:00.000] lowmem : 0xc0000000 - 0xe8000000 ( 640 MB)
- <5>[01-01 00:00:00.000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- <5>[01-01 00:00:00.000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- <5>[01-01 00:00:00.000] .init : 0xc0008000 - 0xc004c000 ( 272 kB)
- <5>[01-01 00:00:00.000] .text : 0xc004c000 - 0xc07b5364 (7589 kB)
- <5>[01-01 00:00:00.000] .data : 0xc07b6000 - 0xc0825a00 ( 447 kB)
- <5>[01-01 00:00:00.000] .bss : 0xc0825a24 - 0xc08b2f48 ( 566 kB)
- <6>[01-01 00:00:00.000] SLUB: Genslabs=13, HWalign=32, Order=0-0, MinObjects=0, CPUs=2, Nodes=1
- <6>[01-01 00:00:00.000] Preemptible hierarchical RCU implementation.
- <6>[01-01 00:00:00.000] NR_IRQS:410
- <4>[01-01 00:00:00.000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
- <6>[01-01 00:00:00.000] OMAP clockevent source: GPTIMER1 at 32768 Hz
- <6>[01-01 00:00:00.000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- <6>[01-01 00:00:00.000] Console: colour dummy device 80x30
- <6>[01-01 00:00:00.000] console [tty0] enabled
- <6>[01-01 00:00:00.000] Calibrating delay loop (skipped) preset value.. 2007.19 BogoMIPS (lpj=7839744)
- <6>[01-01 00:00:00.000] pid_max: default: 32768 minimum: 301
- <6>[01-01 00:00:00.000] Security Framework initialized
- <6>[01-01 00:00:00.000] SELinux: Initializing.
- <7>[01-01 00:00:00.000] SELinux: Starting in permissive mode
- <6>[01-01 00:00:00.000] Mount-cache hash table entries: 512
- <6>[01-01 00:00:00.000] Initializing cgroup subsys debug
- <6>[01-01 00:00:00.000] Initializing cgroup subsys cpuacct
- <6>[01-01 00:00:00.000] Initializing cgroup subsys freezer
- <6>[01-01 00:00:00.000] Initializing cgroup subsys timer_slack
- <6>[01-01 00:00:00.000] CPU: Testing write buffer coherency: ok
- <6>[01-01 00:00:00.000] L310 cache controller enabled
- <6>[01-01 00:00:00.000] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x5e470000, Cache size: 1048576 B
- <4>[01-01 00:00:00.062] CPU1: Booted secondary processor
- <6>[01-01 00:00:00.062] Brought up 2 CPUs
- <6>[01-01 00:00:00.062] SMP: Total of 2 processors activated (4014.38 BogoMIPS).
- <6>[01-01 00:00:00.062] devtmpfs: initialized
- <4>[01-01 00:00:00.062] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for emif_fw
- <4>[01-01 00:00:00.062] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_instr
- <4>[01-01 00:00:00.062] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_1
- <4>[01-01 00:00:00.062] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_2
- <4>[01-01 00:00:00.062] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_abe
- <4>[01-01 00:00:00.062] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_cfg
- <4>[01-01 00:00:00.062] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
- <4>[01-01 00:00:00.062] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
- <4>[01-01 00:00:00.062] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for mpu_private
- <4>[01-01 00:00:00.062] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for sl2if
- <4>[01-01 00:00:00.062] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ohci
- <4>[01-01 00:00:00.062] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ehci
- <4>[01-01 00:00:00.062] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
- <3>[01-01 00:00:00.062] _omap4_module_wait_ready: Timeout waiting for module enable (iva_fck: clkctrl = 0x50001)
- <3>[01-01 00:00:00.070] _omap4_module_wait_ready: Timeout waiting for module enable (mcpdm_fck: clkctrl = 0x30002)
- <4>[01-01 00:00:00.070] omap_hwmod: mcpdm: cannot be enabled (3)
- <6>[01-01 00:00:00.078] print_constraints: dummy:
- <6>[01-01 00:00:00.078] NET: Registered protocol family 16
- <6>[01-01 00:00:00.078] GPMC revision 6.0
- <6>[01-01 00:00:00.078] EMIF0 is enabled with IRQ142
- <6>[01-01 00:00:00.078] EMIF1 is enabled with IRQ143
- <6>[01-01 00:00:00.078] Last reset was cold reset (PRM_RSTST=0x1)
- <6>[01-01 00:00:00.078]
- <6>[01-01 00:00:00.078] OMAP GPIO hardware version 0.1
- <3>[01-01 00:00:00.078] the provided argument 'cp_init' is null[LCD] hx8389_panel is detected
- <6>[01-01 00:00:00.078] omap_mux_init: Add partition: #1: core, flags: 2
- <6>[01-01 00:00:00.078] omap_mux_init: Add partition: #2: wkup, flags: 2
- <4>[01-01 00:00:00.078] omap_vram_set_sdram_vram() omap_vram_sdram_start =0x0, omap_vram_sdram_size=0x800000.
- <3>[01-01 00:00:00.085] omap_mux_init_gpio: Could not set gpio0
- <6>[01-01 00:00:00.085] Modem MIPI-HSI detected
- <6>[01-01 00:00:00.085] HSI: device registered as omap_hwmod: hsi
- <6>[01-01 00:00:00.085] OMAP DMA hardware revision 0.0
- <3>[01-01 00:00:00.085] omap_rproc_get_pool: dsp - no carveout memory is available at all
- <4>[01-01 00:00:00.085] omap_rproc_init ducati name ducati-m3.bin
- <4>[01-01 00:00:00.085] omap_rproc_get_pool: ipu - carveout memory is unavailable: 0x0, 0x0
- <6>[01-01 00:00:00.093] bio: create slab <bio-0> at 0
- <4>[01-01 00:00:00.093] i2c-core: driver [twl] using legacy suspend method
- <4>[01-01 00:00:00.093] i2c-core: driver [twl] using legacy resume method
- <5>[01-01 00:00:00.093] SCSI subsystem initialized
- <6>[01-01 00:00:00.093] omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz
- <4>[01-01 00:00:00.093] Skipping twl internal clock init and using bootloader value (unknown osc rate)
- <6>[01-01 00:00:00.101] twl6030: PIH (irq 39) chaining IRQs 368..387
- <6>[01-01 00:00:00.101] print_constraints: VUSB: 3300 mV normal standby
- <6>[01-01 00:00:00.101] twl6030_usb twl6030_usb: Initialized TWL6030 USB module
- <6>[01-01 00:00:00.101] print_constraints: VMMC: 1200 <--> 3300 mV at 1800 mV normal standby
- <6>[01-01 00:00:00.101] print_constraints: VPP: 1800 mV normal standby
- <6>[01-01 00:00:00.101] print_constraints: VUSIM: 2500 mV normal standby
- <6>[01-01 00:00:00.101] print_constraints: VCXIO: 1800 mV normal standby
- <6>[01-01 00:00:00.109] print_constraints: VDAC: 1800 mV normal standby
- <3>[01-01 00:00:00.109] machine_constraints_voltage: VAUX1_6030: unsupportable voltage constraints
- <3>[01-01 00:00:00.109] twl_reg twl_reg.37: can't register VAUX1_6030, -22
- <4>[01-01 00:00:00.109] twl_reg: probe of twl_reg.37 failed with error -22
- <6>[01-01 00:00:00.109] print_constraints: VAUX2_6030: 3000 mV normal standby
- <6>[01-01 00:00:00.109] print_constraints: VAUX3_6030: 1800 mV normal standby
- <6>[01-01 00:00:00.109] print_constraints: VANA: 2100 mV normal standby
- <6>[01-01 00:00:00.109] print_constraints: CLK32KG:
- <6>[01-01 00:00:00.109] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
- <6>[01-01 00:00:00.109] omap_i2c omap_i2c.3: bus 3 rev4.0 at 400 kHz
- <6>[01-01 00:00:00.109] omap_i2c omap_i2c.4: bus 4 rev4.0 at 400 kHz
- <6>[01-01 00:00:00.109] omap-rproc omap-rproc.0: dsp is available
- <6>[01-01 00:00:00.109] omap-rproc omap-rproc.1: ipu is available
- <6>[01-01 00:00:00.109] Advanced Linux Sound Architecture Driver Version 1.0.24.
- <6>[01-01 00:00:00.109] Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
- <6>[01-01 00:00:00.109] Bluetooth: Core ver 2.16
- <6>[01-01 00:00:00.109] NET: Registered protocol family 31
- <6>[01-01 00:00:00.109] Bluetooth: HCI device and connection manager initialized
- <6>[01-01 00:00:00.109] Bluetooth: HCI socket layer initialized
- <6>[01-01 00:00:00.109] Bluetooth: L2CAP socket layer initialized
- <6>[01-01 00:00:00.109] Bluetooth: SCO socket layer initialized
- <6>[01-01 00:00:00.109] cfg80211: Calling CRDA to update world regulatory domain
- <6>[01-01 00:00:00.109] Switching to clocksource 32k_counter
- <6>[01-01 00:00:00.109] Switched to NOHz mode on CPU #0
- <6>[01-01 00:00:00.109] Switched to NOHz mode on CPU #1
- <6>[01-01 00:00:00.109] musb-hdrc: version 6.0, musb-dma, peripheral
- <7>[01-01 00:00:00.109] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
- <7>[01-01 00:00:00.109] musb-hdrc: MHDRC RTL version 2.0
- <7>[01-01 00:00:00.109] musb-hdrc: setup fifo_mode 4
- <7>[01-01 00:00:00.109] musb-hdrc: 28/31 max ep, 16384/16384 memory
- <6>[01-01 00:00:00.109] musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124
- <6>[01-01 00:00:00.109] NET: Registered protocol family 2
- <6>[01-01 00:00:00.109] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- <6>[01-01 00:00:00.109] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- <6>[01-01 00:00:00.109] TCP bind hash table entries: 65536 (order: 8, 1572864 bytes)
- <6>[01-01 00:00:00.125] TCP: Hash tables configured (established 131072 bind 65536)
- <6>[01-01 00:00:00.125] TCP reno registered
- <6>[01-01 00:00:00.125] UDP hash table entries: 512 (order: 3, 32768 bytes)
- <6>[01-01 00:00:00.125] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes)
- <6>[01-01 00:00:00.125] NET: Registered protocol family 1
- <6>[01-01 00:00:00.125] Trying to unpack rootfs image as initramfs...
- <6>[01-01 00:00:00.140] Freeing initrd memory: 524K
- <4>[01-01 00:00:00.421] ------------[ cut here ]------------
- <4>[01-01 00:00:00.421] WARNING: at /Volumes/android/cm11/kernel/lge/omap4-common/arch/arm/mach-omap2/opp.c:91 omap_init_opp_table+0x11c/0x210()
- <4>[01-01 00:00:00.421] omap_init_opp_table: No clock by name virt_lcd_pclk found
- <4>[01-01 00:00:00.421] Modules linked in:
- <4>[01-01 00:00:00.421] [<c0058ab0>] (unwind_backtrace+0x0/0xf8) from [<c0099bc0>] (warn_slowpath_fmt+0x5c/0x78)
- <4>[01-01 00:00:00.421] [<c0099bc0>] (warn_slowpath_fmt+0x5c/0x78) from [<c0011eac>] (omap_init_opp_table+0x11c/0x210)
- <4>[01-01 00:00:00.421] [<c0011eac>] (omap_init_opp_table+0x11c/0x210) from [<c0012114>] (omap4_opp_init+0x38/0x1c8)
- <4>[01-01 00:00:00.421] [<c0012114>] (omap4_opp_init+0x38/0x1c8) from [<c004c720>] (do_one_initcall+0x10c/0x170)
- <4>[01-01 00:00:00.421] [<c004c720>] (do_one_initcall+0x10c/0x170) from [<c000893c>] (kernel_init+0x98/0x140)
- <4>[01-01 00:00:00.421] [<c000893c>] (kernel_init+0x98/0x140) from [<c005338c>] (kernel_thread_exit+0x0/0x8)
- <4>[01-01 00:00:00.421] ---[ end trace 56e023a774fe93d7 ]---
- <4>[01-01 00:00:00.421] ------------[ cut here ]------------
- <4>[01-01 00:00:00.421] WARNING: at /Volumes/android/cm11/kernel/lge/omap4-common/arch/arm/mach-omap2/opp.c:91 omap_init_opp_table+0x11c/0x210()
- <4>[01-01 00:00:00.421] omap_init_opp_table: No clock by name virt_lcd_pclk found
- <4>[01-01 00:00:00.421] Modules linked in:
- <4>[01-01 00:00:00.421] [<c0058ab0>] (unwind_backtrace+0x0/0xf8) from [<c0099bc0>] (warn_slowpath_fmt+0x5c/0x78)
- <4>[01-01 00:00:00.421] [<c0099bc0>] (warn_slowpath_fmt+0x5c/0x78) from [<c0011eac>] (omap_init_opp_table+0x11c/0x210)
- <4>[01-01 00:00:00.421] [<c0011eac>] (omap_init_opp_table+0x11c/0x210) from [<c0012114>] (omap4_opp_init+0x38/0x1c8)
- <4>[01-01 00:00:00.421] [<c0012114>] (omap4_opp_init+0x38/0x1c8) from [<c004c720>] (do_one_initcall+0x10c/0x170)
- <4>[01-01 00:00:00.421] [<c004c720>] (do_one_initcall+0x10c/0x170) from [<c000893c>] (kernel_init+0x98/0x140)
- <4>[01-01 00:00:00.421] [<c000893c>] (kernel_init+0x98/0x140) from [<c005338c>] (kernel_thread_exit+0x0/0x8)
- <4>[01-01 00:00:00.421] ---[ end trace 56e023a774fe93d8 ]---
- <3>[01-01 00:00:00.421] platform mpu.0: omap4_opp_enable: opp_enable failed(-19) f=1450800000
- <6>[01-01 00:00:00.421] lge_panic_handler: got buffer at 9c7ff000, size 1000
- <4>[01-01 00:00:00.421] lg_wifi_init: start
- <3>[01-01 00:00:00.421] persistent_ram: failed to initialize buffer
- <4>[01-01 00:00:00.421] ram_console: probe of ram_console failed with error -22
- <6>[01-01 00:00:00.421] omap-iommu omap-iommu.0: ducati registered
- <6>[01-01 00:00:00.421] omap-iommu omap-iommu.1: tesla registered
- <4>[01-01 00:00:00.429] highmem bounce pool size: 64 pages
- <6>[01-01 00:00:00.429] ashmem: initialized
- <6>[01-01 00:00:00.437] fuse init (API version 7.16)
- <6>[01-01 00:00:00.437] msgmni has been set to 1206
- <7>[01-01 00:00:00.437] SELinux: Registering netfilter hooks
- <6>[01-01 00:00:00.437] Registering char device tf_driver (122:0)
- <6>[01-01 00:00:00.437] SMCAG01.06.0 D
- <6>[01-01 00:00:00.437] io scheduler noop registered (default)
- <6>[01-01 00:00:00.437] io scheduler deadline registered
- <6>[01-01 00:00:00.437] io scheduler sio registered
- <6>[01-01 00:00:00.437] io scheduler row registered
- <6>[01-01 00:00:00.437] start plist test
- <6>[01-01 00:00:00.437] end plist test
- <6>[01-01 00:00:00.445] OMAP DSS rev 4.0
- <4>[01-01 00:00:00.445] probe_CONFIG_P2_GAMMA
- <4>[01-01 00:00:00.445] [DISPC] LUT Table = 6, PANLE_P760
- <7>[01-01 00:00:00.445] HDCP: hdcp_init() 3489361373
- <6>[01-01 00:00:00.445] dsscomp: initializing.
- <7>[01-01 00:00:00.445] misc dsscomp: display0=hx8389_panel
- <7>[01-01 00:00:00.445] misc dsscomp: display1=hdmi_panel
- <6>[01-01 00:00:00.445] misc dsscomp: found 2 displays and 4 overlays, WB overlay 1
- <3>[01-01 00:00:00.445] could not allocate slot
- <6>[01-01 00:00:00.453] omap-rproc omap-rproc.1: powering up ipu
- <4>[01-01 00:00:00.453] Sensor power off gpio24 request success
- <4>[01-01 00:00:00.453] Sensor power off gpio15 request success
- <4>[01-01 00:00:00.453] Sensor power off gpio22 request success
- <6>[01-01 00:00:00.453] virtio_rpmsg_bus virtio0: rpmsg backend virtproc probed successfully
- <6>[01-01 00:00:00.453] virtio_rpmsg_bus virtio1: rpmsg backend virtproc probed successfully
- <6>[01-01 00:00:00.453] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
- <6>[01-01 00:00:00.453] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
- <6>[01-01 00:00:00.453] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
- <6>[01-01 00:00:00.453] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
- <6>[01-01 00:00:00.453] omap_ion_probe: adding heap secure_input of type 2 with ba300000@1000000
- <6>[01-01 00:00:00.453] omap_ion_probe: adding heap tiler of type 4 with b2b00000@f00000
- <6>[01-01 00:00:00.453] omap_ion_probe: adding heap nonsecure_tiler of type 4 with a0200000@800000
- <6>[01-01 00:00:00.453] omap_ion_probe: adding heap system of type 0 with 0@0
- <6>[01-01 00:00:00.460] brd: module loaded
- <6>[01-01 00:00:00.460] loop: module loaded
- <7>[01-01 00:00:00.460] lbee9qmb-rfkill lbee9qmb-rfkill.0: lbee9qmb_rfkill_probe
- <7>[01-01 00:00:00.460] lbee9qmb-rfkill lbee9qmb-rfkill.0: lbee9qmb_rfkill_set_power: enabled=1
- <7>[01-01 00:00:00.460] lbee9qmb-rfkill lbee9qmb-rfkill.0: lbee9qmb_rfkill_set_power: reset low
- <7>[01-01 00:00:00.492] lbee9qmb-rfkill lbee9qmb-rfkill.0: lbee9qmb_rfkill_set_power: reset high
- <7>[01-01 00:00:00.515] lbee9qmb-rfkill lbee9qmb-rfkill.0: lbee9qmb_rfkill_set_power: enabled=0
- <7>[01-01 00:00:00.515] lbee9qmb-rfkill lbee9qmb-rfkill.0: lbee9qmb_rfkill_set_power: reset low
- <6>[01-01 00:00:00.515] lbee9qmb-rfkill lbee9qmb-rfkill.0: lbee9qmb_rfkill_probe: probed
- <6>[01-01 00:00:00.515] Bosch Sensortec Device detected!
- <6>[01-01 00:00:00.515] BMA250 registered I2C driver!
- <6>[01-01 00:00:00.515] input: bma250 as /devices/virtual/input/input0
- <4>[01-01 00:00:00.515]
- <4>[01-01 00:00:00.515] [I]<6><><bmm_probe><1048>function entrance
- <4>[01-01 00:00:00.515]
- <4>[01-01 00:00:00.515] [I]<6><><bmm_wakeup><179>waking up the chip...
- <4>[01-01 00:00:00.515]
- <4>[01-01 00:00:00.515] [I]<6><><bmm_wakeup><195>wake up result: succeed, tried times: 1
- <4>[01-01 00:00:00.515]
- <4>[01-01 00:00:00.515] [I]<6><><bmm_probe><1072>register dump after waking up
- <7>[01-01 00:00:00.515] 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
- <7>[01-01 00:00:00.515]
- <7>[01-01 00:00:00.515] 32 01 01 00 01 00 01 00 00 00 00 01 06 3f 07 00
- <7>[01-01 00:00:00.515] 00 00 00 ff 00 1e a5 40 00 90 46 63 4f 00 00 00
- <7>[01-01 00:00:00.515] 64 4b 00 00 06 06 12 00 04 03 9e 53 dc 19 f5 fb
- <7>[01-01 00:00:00.515] fd 1d ff ff ff ff ff ff ff ff ff ff ff ff ff ff
- <7>[01-01 00:00:00.515]
- <4>[01-01 00:00:00.515]
- <4>[01-01 00:00:00.515] [I]<6><><bmm_check_chip_id><136>read chip id result: 0x32
- <4>[01-01 00:00:00.515]
- <4>[01-01 00:00:00.515] [N]<5><><bmm_probe><1077>Bosch Sensortec Device bmm050 detected
- <6>[01-01 00:00:00.515] input: bmm050 as /devices/virtual/input/input1
- <7>[01-01 00:00:00.523] 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
- <7>[01-01 00:00:00.523]
- <7>[01-01 00:00:00.523] 32 01 01 00 01 00 01 00 00 00 00 01 06 3f 07 00
- <7>[01-01 00:00:00.523] 00 00 00 ff 00 1e a5 40 00 90 46 63 4f 00 00 00
- <7>[01-01 00:00:00.523] 64 4b 00 00 06 06 12 00 04 03 9e 53 dc 19 f5 fb
- <7>[01-01 00:00:00.523] fd 1d ff ff ff ff ff ff ff ff ff ff ff ff ff ff
- <7>[01-01 00:00:00.523]
- <4>[01-01 00:00:00.523]
- <4>[01-01 00:00:00.523] [N]<5><><bmm_probe><1169>sensor bmm050 probed successfully
- <6>[01-01 00:00:00.523] power_control: device_regulator: e79fbc00
- <6>[01-01 00:00:00.523] power_control: vib_power : ON -> ON
- <6>[01-01 00:00:00.523] [ImmVibeSPI] ImmVibeSPI_ForceOut_Initialize()
- <6>[01-01 00:00:00.523] tspdrv tspdrv: tspdrv: probed
- <6>[01-01 00:00:00.531] input: modem_watcher as /devices/virtual/input/input2
- <4>[01-01 00:00:00.531] mdm_watcher: successfully initialized
- <6>[01-01 00:00:00.531] fsynccontrol_init misc_register(fsynccontrol)
- <6>[01-01 00:00:00.539] Loading pn544 driver
- <6>[01-01 00:00:00.539] pn544_probe : requesting IRQ 164
- <6>[01-01 00:00:00.539] pn544_probe() end
- <6>[01-01 00:00:00.539] pn544_factory_standby_set Go To Dnld mode 2
- <6>[01-01 00:00:00.539] pn544_factory_standby_set platform_data->irq_gpio[4]
- <6>[01-01 00:00:00.539] pn544_factory_standby_set platform_data->ven_gpio[62]
- <6>[01-01 00:00:00.539] pn544_factory_standby_set platform_data->firm_gpio[42]
- <6>[01-01 00:00:00.539] pn544_factory_standby_set pn544_dev->irq_gpio[4]
- <6>[01-01 00:00:00.539] pn544_factory_standby_set pn544_dev->ven_gpio[62]
- <6>[01-01 00:00:00.539] pn544_factory_standby_set pn544_dev->firm_gpio[42]
- <4>[01-01 00:00:00.539] [seokmin] print test
- <6>[01-01 00:00:00.539] PPP generic driver version 2.4.2
- <6>[01-01 00:00:00.539] PPP Deflate Compression module registered
- <6>[01-01 00:00:00.539] PPP BSD Compression module registered
- <6>[01-01 00:00:00.539] PPP MPPE Compression module registered
- <6>[01-01 00:00:00.539] NET: Registered protocol family 24
- <6>[01-01 00:00:00.539] tun: Universal TUN/TAP device driver, 1.6
- <6>[01-01 00:00:00.539] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- <4>[01-01 00:00:00.539] brcm_static_buf_init: initialize wifi_alloc_data
- <4>[01-01 00:00:00.539] Section [3] initial allocation success size[139264]!!!
- <4>[01-01 00:00:00.539] Section [2] initial allocation success size[32768]!!!
- <4>[01-01 00:00:00.539] Section [1] initial allocation success size[12288]!!!
- <4>[01-01 00:00:00.539] Section [0] initial allocation success size[12288]!!!
- <4>[01-01 00:00:00.539] android_usb gadget: using random self ethernet address
- <4>[01-01 00:00:00.539] android_usb gadget: using random host ethernet address
- <6>[01-01 00:00:00.539] usb0: MAC 5a:16:78:df:65:f9
- <6>[01-01 00:00:00.539] usb0: HOST MAC f2:8a:00:64:69:8c
- <6>[01-01 00:00:00.539] android_usb gadget: Mass Storage Function, version: 2009/09/11
- <6>[01-01 00:00:00.539] android_usb gadget: Number of LUNs=2
- <6>[01-01 00:00:00.539] lun0: LUN: removable file: (no medium)
- <6>[01-01 00:00:00.539] lun1: LUN: removable file: (no medium)
- <6>[01-01 00:00:00.539] android_usb gadget: android_usb ready
- <6>[01-01 00:00:00.539] mousedev: PS/2 mouse device common for all mice
- <6>[01-01 00:00:00.539] input: omap4-keypad as /devices/platform/omap/omap4-keypad/input/input3
- <6>[01-01 00:00:00.546] power_control: device_regulator: e71f9480
- <6>[01-01 00:00:00.546] power_control: touch_power : ON -> ON
- <6>[01-01 00:00:00.585] pn544_factory_standby_set Go To I2c write
- <4>[01-01 00:00:00.609] __pn544_kwrite i2c_master_send retry[1]
- <4>[01-01 00:00:00.632] __pn544_kwrite i2c_master_send retry[2]
- <4>[01-01 00:00:00.656] __pn544_kwrite i2c_master_send retry[3]
- <4>[01-01 00:00:00.656] __pn544_kwrite i2c_master_send failed[-121]
- <4>[01-01 00:00:00.656] [seokmin] standby write fail
- <6>[01-01 00:00:00.812] input: touch_dev as /devices/virtual/input/input4
- <6>[01-01 00:00:00.835] twl6030_pwrbutton_probe: Enter
- <6>[01-01 00:00:00.835] input: twl6030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl6030_pwrbutton/input/input5
- <6>[01-01 00:00:00.835] lge-gkpd lge-gkpd: GKPD: gkpd probed
- <4>[01-01 00:00:00.835] ######## bthid_init: ########
- <4>[01-01 00:00:00.835] ######## bthid_init: done ########
- <6>[01-01 00:00:00.835] using rtc device, twl_rtc, for alarms
- <6>[01-01 00:00:00.835] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
- <6>[01-01 00:00:00.835] i2c /dev entries driver
- <6>[01-01 00:00:00.835] lirc_dev: IR Remote Control driver registered, major 248
- <6>[01-01 00:00:00.835] IR NEC protocol handler initialized
- <6>[01-01 00:00:00.835] IR RC5(x) protocol handler initialized
- <6>[01-01 00:00:00.835] IR RC6 protocol handler initialized
- <6>[01-01 00:00:00.835] IR JVC protocol handler initialized
- <6>[01-01 00:00:00.835] IR Sony protocol handler initialized
- <6>[01-01 00:00:00.835] IR RC5 (streamzap) protocol handler initialized
- <6>[01-01 00:00:00.835] IR LIRC bridge handler initialized
- <6>[01-01 00:00:00.835] Linux video capture interface: v2.00
- <6>[01-01 00:00:00.835] dmm: probe base: fd300000, irq 145
- <3>[01-01 00:00:00.843] muic_detect_cable: muic device not installed!
- <4>[01-01 00:00:00.851] Charger_ADC_Value = 1003, PARM_ADC_Value = 1231
- <3>[01-01 00:00:00.851] muic_detect_cable: muic device not installed!
- <6>[01-01 00:00:00.859] twl6030_bci twl6030_bci: twl6030 bci probed
- <4>[01-01 00:00:00.859] max8971_charger_get_property: psp= 4
- <4>[01-01 00:00:00.859] max8971_charger_get_property: psp= 0
- <4>[01-01 00:00:00.859] max8971_charger_get_property: psp= 4
- <4>[01-01 00:00:00.859] max8971_charger_get_property: psp= 0
- <6>[01-01 00:00:00.859] max8971 4-0035: MAX8971_REG_CHG_STAT- 0x10
- <6>[01-01 00:00:00.859] max8971 4-0035: MAX8971_REG_DETAILS1- 0x3
- <6>[01-01 00:00:00.859] max8971 4-0035: MAX8971_REG_DETAILS2- 0x28
- <4>[01-01 00:00:00.859] MAX8971_REG_CHGINT : 0
- <6>[01-01 00:00:00.867] OMAP Watchdog Timer Rev 0x00: initial timeout 120 sec
- <6>[01-01 00:00:00.867] device-mapper: uevent: version 1.0.3
- <6>[01-01 00:00:00.867] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
- <6>[01-01 00:00:00.867] Bluetooth: HCI UART driver ver 2.2
- <6>[01-01 00:00:00.867] Bluetooth: HCI H4 protocol initialized
- <6>[01-01 00:00:00.867] cpuidle: using governor ladder
- <6>[01-01 00:00:00.867] cpuidle: using governor menu
- <4>[01-01 00:00:00.867] ------------[ cut here ]------------
- <4>[01-01 00:00:00.867] WARNING: at /Volumes/android/cm11/kernel/lge/omap4-common/fs/sysfs/dir.c:455 sysfs_add_one+0x88/0xbc()
- <4>[01-01 00:00:00.867] sysfs: cannot create duplicate filename '/devices/virtual/misc/ashmem'
- <4>[01-01 00:00:00.867] Modules linked in:
- <4>[01-01 00:00:00.867] [<c0058ab0>] (unwind_backtrace+0x0/0xf8) from [<c0099bc0>] (warn_slowpath_fmt+0x5c/0x78)
- <4>[01-01 00:00:00.867] [<c0099bc0>] (warn_slowpath_fmt+0x5c/0x78) from [<c016969c>] (sysfs_add_one+0x88/0xbc)
- <4>[01-01 00:00:00.867] [<c016969c>] (sysfs_add_one+0x88/0xbc) from [<c016972c>] (create_dir+0x5c/0xbc)
- <4>[01-01 00:00:00.867] [<c016972c>] (create_dir+0x5c/0xbc) from [<c0169840>] (sysfs_create_dir+0x88/0xdc)
- <4>[01-01 00:00:00.867] [<c0169840>] (sysfs_create_dir+0x88/0xdc) from [<c02198d8>] (kobject_add_internal+0x98/0x1b8)
- <4>[01-01 00:00:00.867] [<c02198d8>] (kobject_add_internal+0x98/0x1b8) from [<c0219cec>] (kobject_add+0x4c/0x9c)
- <4>[01-01 00:00:00.867] [<c0219cec>] (kobject_add+0x4c/0x9c) from [<c02a222c>] (device_add+0xa8/0x540)
- <4>[01-01 00:00:00.875] [<c02a222c>] (device_add+0xa8/0x540) from [<c02a2780>] (device_create_vargs+0xa4/0xd4)
- <4>[01-01 00:00:00.875] [<c02a2780>] (device_create_vargs+0xa4/0xd4) from [<c02a27d0>] (device_create+0x20/0x28)
- <4>[01-01 00:00:00.875] [<c02a27d0>] (device_create+0x20/0x28) from [<c029d8c4>] (misc_register+0x98/0x144)
- <4>[01-01 00:00:00.875] [<c029d8c4>] (misc_register+0x98/0x144) from [<c002ec00>] (ashmem_init+0x70/0xc0)
- <4>[01-01 00:00:00.875] [<c002ec00>] (ashmem_init+0x70/0xc0) from [<c004c720>] (do_one_initcall+0x10c/0x170)
- <4>[01-01 00:00:00.875] [<c004c720>] (do_one_initcall+0x10c/0x170) from [<c000893c>] (kernel_init+0x98/0x140)
- <4>[01-01 00:00:00.875] [<c000893c>] (kernel_init+0x98/0x140) from [<c005338c>] (kernel_thread_exit+0x0/0x8)
- <4>[01-01 00:00:00.875] ---[ end trace 56e023a774fe93d9 ]---
- <3>[01-01 00:00:00.875] kobject_add_internal failed for ashmem with -EEXIST, don't try to register things with the same name in the same directory.
- <4>[01-01 00:00:00.875] [<c0058ab0>] (unwind_backtrace+0x0/0xf8) from [<c0219918>] (kobject_add_internal+0xd8/0x1b8)
- <4>[01-01 00:00:00.875] [<c0219918>] (kobject_add_internal+0xd8/0x1b8) from [<c0219cec>] (kobject_add+0x4c/0x9c)
- <4>[01-01 00:00:00.875] [<c0219cec>] (kobject_add+0x4c/0x9c) from [<c02a222c>] (device_add+0xa8/0x540)
- <4>[01-01 00:00:00.875] [<c02a222c>] (device_add+0xa8/0x540) from [<c02a2780>] (device_create_vargs+0xa4/0xd4)
- <4>[01-01 00:00:00.875] [<c02a2780>] (device_create_vargs+0xa4/0xd4) from [<c02a27d0>] (device_create+0x20/0x28)
- <4>[01-01 00:00:00.875] [<c02a27d0>] (device_create+0x20/0x28) from [<c029d8c4>] (misc_register+0x98/0x144)
- <4>[01-01 00:00:00.875] [<c029d8c4>] (misc_register+0x98/0x144) from [<c002ec00>] (ashmem_init+0x70/0xc0)
- <4>[01-01 00:00:00.875] [<c002ec00>] (ashmem_init+0x70/0xc0) from [<c004c720>] (do_one_initcall+0x10c/0x170)
- <4>[01-01 00:00:00.875] [<c004c720>] (do_one_initcall+0x10c/0x170) from [<c000893c>] (kernel_init+0x98/0x140)
- <4>[01-01 00:00:00.875] [<c000893c>] (kernel_init+0x98/0x140) from [<c005338c>] (kernel_thread_exit+0x0/0x8)
- <3>[01-01 00:00:00.875] ashmem: failed to register misc device!
- <6>[01-01 00:00:00.875] logger: created 64K log 'log_main'
- <6>[01-01 00:00:00.875] logger: created 32K log 'log_events'
- <6>[01-01 00:00:00.875] logger: created 32K log 'log_radio'
- <6>[01-01 00:00:00.875] logger: created 64K log 'log_system'
- <6>[01-01 00:00:00.875] zram: num_devices not specified. Using default: 1
- <6>[01-01 00:00:00.875] zram: Creating 1 devices ...
- <6>[01-01 00:00:00.875] tsu5611 3-0044: muic_init_tsu5611: reset type 2
- <6>[01-01 00:00:00.875] tsu5611 3-0044: muic_init_tsu5611 by BOOTUP
- <6>[01-01 00:00:01.054] mmc0: new high speed DDR MMC card at address 0001
- <6>[01-01 00:00:01.054] mmcblk0: mmc0:0001 XINYH 3.60 GiB
- <6>[01-01 00:00:01.054] mmcblk0boot0: mmc0:0001 XINYH partition 1 2.00 MiB
- <6>[01-01 00:00:01.054] mmcblk0boot1: mmc0:0001 XINYH partition 2 2.00 MiB
- <4>[01-01 00:00:01.054] Alternate GPT is invalid, using primary GPT.
- <6>[01-01 00:00:01.054] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14
- <6>[01-01 00:00:01.062] mmcblk0boot1: unknown partition table
- <6>[01-01 00:00:01.062] mmcblk0boot0: unknown partition table
- <6>[01-01 00:00:01.226] tsu5611 3-0044: muic_tsu5611_set_mode: INT_STATUS1:0x4b pre_mode:0
- <6>[01-01 00:00:01.226] tsu5611 3-0044: muic_detect_device_set_mode: muic_retain_mode:0, Int_Status:0, INT_STATUS1:0x4b
- <6>[01-01 00:00:01.226] tsu5611 3-0044: muic_detect_device_set_mode: VBUS is Low.
- <6>[01-01 00:00:01.226] muic: muic_set_mode, mode:NONE
- <6>[01-01 00:00:01.226] muic_control_max8971_charger: NONE.
- <4>[01-01 00:00:01.226] max8971_chg pointer is not NULL
- <6>[01-01 00:00:01.226] max8971 4-0035: Disable charger
- <6>[01-01 00:00:01.226] tsu5611 3-0044: muic_init_for_none_mode: MUIC_UNKNOWN or MUIC_NONE mode
- <6>[01-01 00:00:01.226] tsu5611 3-0044: muic_init_tsu5611: reset type 0
- <6>[01-01 00:00:01.226] fota: controler initialized
- <4>[01-01 00:00:01.226] --------------------
- <4>[01-01 00:00:01.226] apds9190 driver init
- <4>[01-01 00:00:01.226] --------------------
- <4>[01-01 00:00:01.226] apds9190_probe(): stored_cross_talk = 0, data->cross_talk = 0
- <4>[01-01 00:00:01.226] apds9190_probe(): 150 < ps_data < 250
- <4>[01-01 00:00:01.234] apds9190_probe(): apds9190 ID = 0x29
- <4>[01-01 00:00:01.234] apds9190_probe(): enable = 0
- <4>[01-01 00:00:01.234] initialize APDS-9190 client
- <6>[01-01 00:00:01.234] input: proximity as /devices/virtual/input/input6
- <4>[01-01 00:00:01.234] apds9190_probe support ver. 1.0.5 enabled
- <4>[01-01 00:00:01.234] -----------------------------
- <4>[01-01 00:00:01.234] apds9190 driver initialized!!
- <4>[01-01 00:00:01.234] -----------------------------
- <4>[01-01 00:00:01.234] i2c-core: driver [apds9190] using legacy suspend method
- <4>[01-01 00:00:01.234] i2c-core: driver [apds9190] using legacy resume method
- <4>[01-01 00:00:01.242] i2c-core: driver [lm3559] using legacy suspend method
- <4>[01-01 00:00:01.242] i2c-core: driver [lm3559] using legacy resume method
- <7>[01-01 00:00:01.242] Registered led device: button-backlight
- <6>[01-01 00:00:01.242] gpio_control gpio_control: gpio control probed
- <4>[01-01 00:00:01.242] [juya]max17048_probe!!!
- <6>[01-01 00:00:01.242] max17043_i2c 4-0036: MAX17043 Fuel-Gauge Ver 18
- <6>[01-01 00:00:01.242] max17043_i2c 4-0036: max17043 probed
- <4>[01-01 00:00:01.242] i2c-core: driver [max17043_i2c] using legacy suspend method
- <4>[01-01 00:00:01.242] i2c-core: driver [max17043_i2c] using legacy resume method
- <6>[01-01 00:00:01.242] gps_gpio_init
- <6>[01-01 00:00:01.242] gps_gpio_probe
- <6>[01-01 00:00:01.242] LG SoC init
- <4>[01-01 00:00:01.250] twl6040-codec twl6040-codec: couldn't get VDDHF regulator -19
- <6>[01-01 00:00:01.273] asoc: null-codec-dai <-> MultiMedia1 mapping ok
- <6>[01-01 00:00:01.273] asoc: null-codec-dai <-> MultiMedia2 mapping ok
- <6>[01-01 00:00:01.273] asoc: null-codec-dai <-> Voice mapping ok
- <6>[01-01 00:00:01.273] asoc: null-codec-dai <-> Tones mapping ok
- <6>[01-01 00:00:01.273] asoc: null-codec-dai <-> Vibra mapping ok
- <6>[01-01 00:00:01.273] asoc: null-codec-dai <-> MODEM mapping ok
- <6>[01-01 00:00:01.273] asoc: null-codec-dai <-> MultiMedia1 LP mapping ok
- <6>[01-01 00:00:01.281] asoc: FM Digital <-> omap-mcbsp-dai.2 mapping ok
- <6>[01-01 00:00:01.281] asoc: twl6040-dl1 <-> mcpdm-dl mapping ok
- <4>[01-01 00:00:01.343] mmc1: host does not support reading read-only switch. assuming write-enable.
- <6>[01-01 00:00:01.343] mmc1: new high speed SD card at address 1234
- <6>[01-01 00:00:01.343] mmcblk1: mmc1:1234 SA02G 1.85 GiB
- <6>[01-01 00:00:01.343] mmcblk1: p1
- <7>[01-01 00:00:01.492] ***************** Headset None
- <4>[01-01 00:00:01.492] twl6040-codec twl6040-codec: ASoC: Failed to create Aux/FM Stereo In debugfs file
- <6>[01-01 00:00:01.492] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok
- <6>[01-01 00:00:01.492] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok
- <6>[01-01 00:00:01.492] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok
- <6>[01-01 00:00:01.492] asoc: twl6040-vib <-> mcpdm-vib mapping ok
- <6>[01-01 00:00:01.492] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
- <6>[01-01 00:00:01.492] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
- <6>[01-01 00:00:01.492] asoc: FM Digital <-> omap-mcbsp-dai.2 mapping ok
- <6>[01-01 00:00:01.492] asoc: MODEM <-> omap-mcbsp-dai.1 mapping ok
- <6>[01-01 00:00:01.492] asoc: null-codec-dai <-> omap-abe-vxrec-dai mapping ok
- <6>[01-01 00:00:01.500] input: u2 Headset Jack as /devices/platform/soc-audio/sound/card0/input7
- <6>[01-01 00:00:01.500] asoc: hdmi-audio-codec <-> hdmi-audio-dai mapping ok
- <6>[01-01 00:00:01.500] ALSA device list:
- <6>[01-01 00:00:01.500] #0: OMAP4 Board
- <6>[01-01 00:00:01.500] #1: OMAP4HDMI
- <6>[01-01 00:00:01.500] Netfilter messages via NETLINK v0.30.
- <6>[01-01 00:00:01.500] nf_conntrack version 0.5.0 (13574 buckets, 54296 max)
- <6>[01-01 00:00:01.500] ctnetlink v0.93: registering with nfnetlink.
- <6>[01-01 00:00:01.500] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- <6>[01-01 00:00:01.500] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- <6>[01-01 00:00:01.500] xt_time: kernel timezone is -0000
- <6>[01-01 00:00:01.500] ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>[01-01 00:00:01.507] arp_tables: (C) 2002 David S. Miller
- <6>[01-01 00:00:01.507] TCP bic registered
- <6>[01-01 00:00:01.507] TCP cubic registered
- <6>[01-01 00:00:01.507] TCP westwood registered
- <6>[01-01 00:00:01.507] TCP highspeed registered
- <6>[01-01 00:00:01.507] TCP hybla registered
- <6>[01-01 00:00:01.507] TCP htcp registered
- <6>[01-01 00:00:01.507] TCP vegas registered
- <6>[01-01 00:00:01.507] TCP veno registered
- <6>[01-01 00:00:01.507] TCP scalable registered
- <6>[01-01 00:00:01.507] TCP lp registered
- <6>[01-01 00:00:01.507] TCP yeah registered
- <6>[01-01 00:00:01.507] TCP illinois registered
- <6>[01-01 00:00:01.507] Initializing XFRM netlink socket
- <6>[01-01 00:00:01.507] NET: Registered protocol family 10
- <6>[01-01 00:00:01.507] Mobile IPv6
- <6>[01-01 00:00:01.507] ip6_tables: (C) 2000-2006 Netfilter Core Team
- <6>[01-01 00:00:01.507] IPv6 over IPv4 tunneling driver
- <6>[01-01 00:00:01.515] NET: Registered protocol family 17
- <6>[01-01 00:00:01.515] NET: Registered protocol family 15
- <5>[01-01 00:00:01.515] Bridge firewalling registered
- <6>[01-01 00:00:01.515] Bluetooth: RFCOMM TTY layer initialized
- <6>[01-01 00:00:01.515] Bluetooth: RFCOMM socket layer initialized
- <6>[01-01 00:00:01.515] Bluetooth: RFCOMM ver 1.11
- <6>[01-01 00:00:01.515] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- <6>[01-01 00:00:01.515] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <6>[01-01 00:00:01.515] L2TP core driver, V2.0
- <6>[01-01 00:00:01.515] PPPoL2TP kernel driver, V2.0
- <6>[01-01 00:00:01.515] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
- <6>[01-01 00:00:01.515] ThumbEE CPU extension supported.
- <5>[01-01 00:00:01.515] Registering SWP/SWPB emulation handler
- <3>[01-01 00:00:01.515] twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1418000 Vs max 1417960
- <6>[01-01 00:00:01.515] Reprogramming LPDDR2 timings to 400000000 Hz
- <4>[01-01 00:00:01.515] sr_init: No PMIC hook to init smartreflex
- <6>[01-01 00:00:01.515] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
- <6>[01-01 00:00:01.515] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
- <6>[01-01 00:00:01.515] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized
- <6>[01-01 00:00:01.523] SmartReflex class 1.5 driver: initialized (86400000ms)
- <3>[01-01 00:00:01.523] Power Management for TI OMAP4.
- <6>[01-01 00:00:01.523] OMAP4 PM: Static dependency added between MPUSS <-> EMIF, MPUSS <-> L4_PER/CFG MPUSS <-> L3_MAIN_1.
- <6>[01-01 00:00:01.523] OMAP4 PM: Static dependency added between DUCATI <-> L4_PER/CFG and DUCATI <-> L3.
- <6>[01-01 00:00:01.523] input: suspend_autotest_pwrkey as /devices/virtual/input/input8
- <6>[01-01 00:00:01.523] twl-i2c: name (null), irq 88
- <6>[01-01 00:00:01.523] twl-i2c: name (null), pa 0x48070000-0x480700ff
- <6>[01-01 00:00:01.523] twl-i2c: va 0xfa070000
- <6>[01-01 00:00:01.523] twl-i2c: rev 0x40
- <6>[01-01 00:00:01.531] clock: disabling unused clocks to save power
- <6>[01-01 00:00:01.531] cannot apply mgr(lcd) on inactive device
- <4>[01-01 00:00:01.531] omapfb omapfb: failed to apply dispc config
- <6>[01-01 00:00:01.531] cannot apply mgr(tv) on inactive device
- <4>[01-01 00:00:01.531] omapfb omapfb: failed to apply dispc config
- <6>[01-01 00:00:01.531] cannot apply mgr(lcd2) on inactive device
- <4>[01-01 00:00:01.531] omapfb omapfb: failed to apply dispc config
- <4>[01-01 00:00:01.531] [LCD] : hx8389_panel_power_on
- <3>[01-01 00:00:01.539] omapdss_dispc omapdss_dispc: omap_device_scale: Unable to find OPP for freq0
- <4>[01-01 00:00:01.539] regulator_init_complete: VANA: incomplete constraints, leaving on
- <4>[01-01 00:00:01.539] regulator_init_complete: VDAC: incomplete constraints, leaving on
- <6>[01-01 00:00:01.539] soundcontrol_init misc_register(soundcontrol)
- <4>[01-01 00:00:01.546] wifi_set_power = 1
- <4>[01-01 00:00:01.546] lg_wifi_power: 1
- <6>[01-01 00:00:01.656] sr_class1p5_calib_work: core: Calibration complete: Voltage Nominal=1127000Calib=1038160 margin=0
- <6>[01-01 00:00:01.656] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nominal=1375000Calib=1253380 margin=0
- <6>[01-01 00:00:01.656] sr_class1p5_calib_work: iva: Calibration complete: Voltage Nominal=950000Calib=848260 margin=0
- <4>[01-01 00:00:01.757] wifi_set_carddetect = 1
- <4>[01-01 00:00:01.757] lg_wifi_set_carddetect: 1
- <4>[01-01 00:00:01.757]
- <4>[01-01 00:00:01.757] Dongle Host Driver, version 1.21.0
- <6>[01-01 00:00:01.820] sr_class1p5_calib_work: core: Calibration complete: Voltage Nominal=962000Calib=873580 margin=0
- <6>[01-01 00:00:01.820] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nominal=1005000Calib=860920 margin=0
- <6>[01-01 00:00:01.851] mmc2: new high speed SDIO card at address 0001
- <4>[01-01 00:00:01.851] mem_prealloc: section [3] size[139264]
- <4>[01-01 00:00:01.851] mem_prealloc: This data is using!!!
- <4>[01-01 00:00:01.851] alloc static buf at e7b40000!
- <4>[01-01 00:00:01.851] mem_prealloc: section [4] size[0]
- <4>[01-01 00:00:01.859] DHD: dongle ram size is set to 294912(orig 294912)
- <4>[01-01 00:00:01.859] read_fw_path: Failed to open wlan fw path param
- <4>[01-01 00:00:01.859] read_fw_path: set fw path to default(STA).
- <4>[01-01 00:00:01.859] mem_prealloc: section [0] size[10312]
- <4>[01-01 00:00:01.859] mem_prealloc: This data is using!!!
- <4>[01-01 00:00:01.875] p2p0: P2P Interface Registered
- <4>[01-01 00:00:01.875] mem_prealloc: section [1] size[10300]
- <4>[01-01 00:00:01.875] mem_prealloc: This data is using!!!
- <4>[01-01 00:00:01.875] mem_prealloc: section [2] size[32768]
- <4>[01-01 00:00:01.875] mem_prealloc: This data is using!!!
- <4>[01-01 00:00:01.882] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
- <4>[01-01 00:00:01.882] wifi_set_power = 0
- <4>[01-01 00:00:01.882] lg_wifi_power: 0
- <4>[01-01 00:00:02.093] =========== WLAN placed in RESET ========
- <6>[02-06 02:45:06.500] twl_rtc twl_rtc: setting system clock to 2014-02-06 02:45:06 UTC (1391654706)
- <6>[02-06 02:45:06.500] OMAP HSI: HSI driver version 0.4.3
- <6>[02-06 02:45:06.500] omap_hsi omap_hsi.0: Registering IRQ hsi_p1_mpu (99)
- <6>[02-06 02:45:06.500] omap_hsi omap_hsi.0: HSI port 1 initialized
- <6>[02-06 02:45:06.500] omap_hsi omap_hsi.0: Registering IRQ hsi_dma_mpu (103)
- <6>[02-06 02:45:06.500] omap_hsi omap_hsi.0: HSI Hardware REVISION 0x50043101
- <6>[02-06 02:45:06.500] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:0 (mask:ffff)
- <6>[02-06 02:45:06.500] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:1 (mask:ffff)
- <6>[02-06 02:45:06.500] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:2 (mask:ffff)
- <6>[02-06 02:45:06.500] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:3 (mask:ffff)
- <6>[02-06 02:45:06.500] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:4 (mask:ffff)
- <6>[02-06 02:45:06.500] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:5 (mask:ffff)
- <6>[02-06 02:45:06.500] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:6 (mask:ffff)
- <6>[02-06 02:45:06.500] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:7 (mask:ffff)
- <6>[02-06 02:45:06.500] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:8 (mask:ffff)
- <6>[02-06 02:45:06.500] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:9 (mask:ffff)
- <6>[02-06 02:45:06.500] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:10 (mask:ffff)
- <6>[02-06 02:45:06.507] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:11 (mask:ffff)
- <6>[02-06 02:45:06.507] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:12 (mask:ffff)
- <6>[02-06 02:45:06.507] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:13 (mask:ffff)
- <6>[02-06 02:45:06.507] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:14 (mask:ffff)
- <6>[02-06 02:45:06.507] HSI DRIVER BUS : hsi_bus_match SUCCESS : ctrl:0 (mask:ffffffff), port:0, ch:15 (mask:ffff)
- <4>[02-06 02:45:06.507] HSI_LL:Error setting AC_WAKE line err=-1. hsi_ll_wakeup_cp 1418
- <6>[02-06 02:45:06.539] Freeing init memory: 272K
- <7>[02-06 02:45:06.554] SELinux: 512 avtab hash slots, 1344 rules.
- <7>[02-06 02:45:06.554] SELinux: 512 avtab hash slots, 1344 rules.
- <7>[02-06 02:45:06.554] SELinux: 1 users, 2 roles, 292 types, 1 bools, 1 sens, 1024 cats
- <7>[02-06 02:45:06.554] SELinux: 84 classes, 1344 rules
- <7>[02-06 02:45:06.554] SELinux: Completing initialization.
- <7>[02-06 02:45:06.554] SELinux: Setting up existing superblocks.
- <7>[02-06 02:45:06.554] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- <7>[02-06 02:45:06.554] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
- <7>[02-06 02:45:06.554] SELinux: initialized (dev bdev, type bdev), not configured for labeling
- <7>[02-06 02:45:06.554] SELinux: initialized (dev proc, type proc), uses genfs_contexts
- <7>[02-06 02:45:06.554] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[02-06 02:45:06.554] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
- <7>[02-06 02:45:06.562] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
- <7>[02-06 02:45:06.562] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
- <7>[02-06 02:45:06.562] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
- <7>[02-06 02:45:06.562] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
- <7>[02-06 02:45:06.570] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
- <7>[02-06 02:45:06.570] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
- <7>[02-06 02:45:06.570] SELinux: initialized (dev mtd_inodefs, type mtd_inodefs), not configured for labeling
- <7>[02-06 02:45:06.570] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[02-06 02:45:06.570] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- <4>[02-06 02:45:06.812] SELinux: Loaded policy from /sepolicy
- <3>[02-06 02:45:09.234] init: /init.lgep760board.rc: 428: invalid command 'echo'
- <3>[02-06 02:45:09.234] init: could not import file '/init.carrier.rc' from '/init.rc'
- <4>[02-06 02:45:09.234] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
- <3>[02-06 02:45:09.234] init: do_chown: Could not access /selinux/booleans
- <4>[02-06 02:45:09.265] max8971_charger_get_property: psp= 4
- <4>[02-06 02:45:09.265] max8971_charger_get_property: psp= 0
- <3>[02-06 02:45:09.429] init: /dev/hw_random not found
- <3>[02-06 02:45:09.429] init: cannot open '/initlogo.rle'
- <7>[02-06 02:45:09.445] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
- <7>[02-06 02:45:09.445] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[02-06 02:45:09.453] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[02-06 02:45:09.453] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[02-06 02:45:09.453] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <6>[02-06 02:45:09.460] ### Invaild #### - CP_CRASH_INT_N is discarded
- <7>[02-06 02:45:09.492] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
- <6>[02-06 02:45:09.515] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: barrier=1
- <7>[02-06 02:45:09.515] SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
- <6>[02-06 02:45:09.539] EXT4-fs (mmcblk0p12): recovery complete
- <6>[02-06 02:45:09.539] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
- <7>[02-06 02:45:09.539] SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr
- <6>[02-06 02:45:09.578] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/omap/omap_hsmmc.1/by-name/cache
- <6>[02-06 02:45:09.812] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
- <6>[02-06 02:45:09.812] e2fsck: /dev/block/platform/omap/omap_hsmmc.1/by-name/cache: clean, 16/12800 files, 1891/51200 blocks
- <6>[02-06 02:45:09.812] omap-rproc omap-rproc.1: Loaded BIOS image ducati-m3.bin, size 5889604
- <6>[02-06 02:45:09.812] omap-rproc omap-rproc.1: BIOS image version is 2
- <6>[02-06 02:45:09.843] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered
- <7>[02-06 02:45:09.843] SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr
- <3>[02-06 02:45:09.859] _omap4_module_wait_ready: Timeout waiting for module enable (ipu_fck: clkctrl = 0x50001)
- <6>[02-06 02:45:09.867] omap-iommu omap-iommu.0: ducati: version 2.1
- <6>[02-06 02:45:09.875] omap-rproc omap-rproc.1: remote processor ipu is now up
- <6>[02-06 02:45:09.890] omap_rpmsg_mbox_callback: received echo reply from ipu !
- <6>[02-06 02:45:09.890] omap_rpmsg_mbox_callback: received echo reply from ipu !
- <6>[02-06 02:45:09.890] omap_rpmsg_mbox_callback: received echo reply from ipu !
- <6>[02-06 02:45:09.890] omap_rpmsg_mbox_callback: received echo reply from ipu !
- <6>[02-06 02:45:09.890] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x32
- <6>[02-06 02:45:09.890] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x33
- <6>[02-06 02:45:09.890] virtio_rpmsg_bus virtio0: creating channel rpmsg-omx0 addr 0x3c
- <6>[02-06 02:45:09.890] rpmsg_omx rpmsg-omx0: new OMX connection srv channel: 1024 -> 60!
- <6>[02-06 02:45:10.125] virtio_rpmsg_bus virtio1: creating channel rpmsg-omx1 addr 0x3c
- <6>[02-06 02:45:10.125] rpmsg_omx rpmsg-omx1: new OMX connection srv channel: 1024 -> 60!
- <7>[02-06 02:45:11.984] EXT4-fs (mmcblk0p11): ext4_orphan_cleanup: deleting unreferenced inode 9305
- <7>[02-06 02:45:11.984] EXT4-fs (mmcblk0p11): ext4_orphan_cleanup: deleting unreferenced inode 9244
- <6>[02-06 02:45:11.984] EXT4-fs (mmcblk0p11): 2 orphan inodes deleted
- <6>[02-06 02:45:11.984] EXT4-fs (mmcblk0p11): recovery complete
- <6>[02-06 02:45:12.015] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
- <7>[02-06 02:45:12.015] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr
- <6>[02-06 02:45:12.101] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/omap/omap_hsmmc.1/by-name/userdata
- <6>[02-06 02:45:12.109] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
- <6>[02-06 02:45:12.109] e2fsck: /dev/block/platform/omap/omap_hsmmc.1/by-name/userdata: clean, 9534/155344 files, 431462/620544 blocks
- <6>[02-06 02:45:12.117] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,noauto_da_alloc
- <7>[02-06 02:45:12.117] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr
- <4>[02-06 02:45:12.125] EXT4-fs (mmcblk0p13): warning: maximal mount count reached, running e2fsck is recommended
- <6>[02-06 02:45:12.125] EXT4-fs (mmcblk0p13): recovery complete
- <6>[02-06 02:45:12.125] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,nodelalloc
- <7>[02-06 02:45:12.125] SELinux: initialized (dev mmcblk0p13, type ext4), uses xattr
- <6>[02-06 02:45:12.164] PVR: PVRCore_Init
- <6>[02-06 02:45:12.164] PVR: PVRSRVDriverProbe(pDevice=e7890a00)
- <6>[02-06 02:45:12.164] PVR: SGX register base: 0x56000000
- <6>[02-06 02:45:12.164] PVR: SGX register size: 65535
- <6>[02-06 02:45:12.164] PVR: SGX IRQ: 53
- <6>[02-06 02:45:12.164] PVR: EnableSystemClocks: Enabling System Clocks
- <3>[02-06 02:45:12.164] init: /dev/hw_random not found
- <6>[02-06 02:45:12.164] PVR: PVRCore_Init: major device 245
- <6>[02-06 02:45:12.179] omaplfbOMAPLFBInit: Blitsville gc2d not present, blits disabled
- <7>[02-06 02:45:12.179] omaplfb: OMAPLFBInitIonOmap: Device 0: Requesting 2 TILER 2D framebuffers
- <6>[02-06 02:45:12.226] PVR: Installing MISR with cookie bf0385f0
- <6>[02-06 02:45:12.226] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie e6cc6c00
- <6>[02-06 02:45:12.226] PVR: OSUnMapPhysToLin: unmapping 65535 bytes from e8d20000
- <6>[02-06 02:45:12.226] PVR: SysFinalise: Version string: SGX revision = 1.2.0
- <3>[02-06 02:45:12.234] healthd: wakealarm_init: timerfd_create failed
- <6>[02-06 02:45:12.242] binder: 148:148 transaction failed 29189, size 0-0
- <3>[02-06 02:45:12.250] init: cannot find '/system/bin/lgsecclkserver', disabling 'lgsecclk'
- <3>[02-06 02:45:12.250] init: cannot find '/system/bin/lgdrmserver', disabling 'lgdrm'
- <3>[02-06 02:45:12.265] LG-android_usb: already disabled
- <3>[02-06 02:45:12.265] HDCP: failed to load keys
- <6>[02-06 02:45:12.289] adb_open
- <6>[02-06 02:45:12.289] adb_bind_config
- <6>[02-06 02:45:12.421] warning: `rild' uses 32-bit capabilities (legacy support in use)
- <6>[02-06 02:45:12.515] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nominal=1310000Calib=1139440 margin=0
- <4>[02-06 02:45:12.546] xmdtty: gpio 122 value is 0 ##########
- <4>[02-06 02:45:12.546] xmdtty: gpio 122 value is 0 ##########
- <4>[02-06 02:45:12.546] xmdtty: gpio 122 value is 0 ##########
- <4>[02-06 02:45:12.546] xmdtty: gpio 122 value is 0 ##########
- <4>[02-06 02:45:12.546] xmdtty: gpio 122 value is 0 ##########
- <4>[02-06 02:45:12.546] xmdtty: gpio 122 value is 0 ##########
- <4>[02-06 02:45:12.546] xmdtty: gpio 122 value is 0 ##########
- <4>[02-06 02:45:12.546] xmdtty: gpio 122 value is 0 ##########
- <4>[02-06 02:45:12.554] xmdtty: gpio 122 value is 0 ##########
- <6>[02-06 02:45:12.570] gps_gpio_reset_store
- <4>[02-06 02:45:13.007] misc dsscomp: [e6030800] ignoring set failure -22
- <6>[02-06 02:45:13.007] mgr_blank while GO is set[LCD] : hx8389_panel_power_off
- <3>[02-06 02:45:13.007] [HYUN]dsi_vc_config_l4, DCS_CMD_ENABLE
- <3>[02-06 02:45:13.218] omapdss_dispc omapdss_dispc: omap_device_scale: Unable to find OPP for freq0
- <4>[02-06 02:45:13.218] [LCD] : hx8389_panel_power_on
- <3>[02-06 02:45:13.234] omapdss_dispc omapdss_dispc: omap_device_scale: Unable to find OPP for freq0
- <3>[02-06 02:45:13.507] omapdss MANAGER error: mgr(2)->wait_for_go() timeout
- <3>[02-06 02:45:13.507]
- <3>[02-06 02:45:13.507] :: , func=dss_mgr_wait_for_go, line=941Charger_ADC_Value = 988, PARM_ADC_Value = 1230
- <6>[02-06 02:45:17.468] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nominal=1185000Calib=1012840 margin=0
- <4>[02-06 02:45:19.625] apds9190_store_enable_ps_sensor: enable proximity sensor (1)
- <4>[02-06 02:45:19.625] apds_9190_init: configurations are set
- <4>[02-06 02:45:20.617] status = 23
- <4>[02-06 02:45:20.617] * Set ALS Theshold for normal mode
- <4>[02-06 02:45:20.625] [ProximitySensor] near-to-FAR
- <4>[02-06 02:45:20.773] apds9190_store_enable_ps_sensor: enable proximity sensor (0)
- <4>[02-06 02:45:33.609] mcm: channel 6 not yet opened so dropping the packet
- <4>[02-06 02:45:33.609] mcm: channel 7 not yet opened so dropping the packet
- <4>[02-06 02:45:33.609] mcm: channel 9 not yet opened so dropping the packet
- <4>[02-06 02:45:33.609] mcm: channel 13 not yet opened so dropping the packet
- <4>[02-06 02:45:33.609] mcm: channel 14 not yet opened so dropping the packet
- <4>[02-06 02:45:33.609] mcm: channel 15 not yet opened so dropping the packet
- <6>[02-06 02:45:38.984] request_suspend_state: wakeup (3->0) at 34598846436 (2014-02-06 02:45:38.992553710 UTC)
- <4>[02-05 23:45:41.625]
- <4>[02-05 23:45:41.625] Dongle Host Driver, version 1.21.0
- <4>[02-05 23:45:41.625] wl_android_wifi_on in
- <4>[02-05 23:45:41.625] wifi_set_power = 1
- <4>[02-05 23:45:41.625] lg_wifi_power: 1
- <6>[02-05 23:45:41.710] adb_release
- <6>[02-05 23:45:41.710] adb_open
- <6>[02-05 23:45:41.710] adb_bind_config
- <6>[02-05 23:45:41.718] acc_open
- <6>[02-05 23:45:41.718] acc_release
- <4>[02-05 23:45:41.835] =========== WLAN going back to live ========
- <4>[02-05 23:45:41.835] sdio_reset_comm():
- <4>[02-05 23:45:42.046] Initial WLC_GET_AP value is [1]
- <4>[02-05 23:45:42.046] Firmware up: op_mode=4, Broadcom Dongle Host Driver mac=00:90:4c:c5:12:38
- <4>[02-05 23:45:42.046] dhd_preinit_config : config path : /data/misc/wifi/config
- <4>[02-05 23:45:42.054] dhd_preinit_proc: Change Macaddr = 70:05:14:6F:4A:BF
- <4>[02-05 23:45:42.062] Firmware version = wl0: Aug 13 2012 08:22:34 version 5.90.125.120C (WFD)
- <4>[02-05 23:45:42.062] p2p0: p2p_dev_addr=72:05:14:6f:4a:bf
- <7>[02-05 23:45:43.437] SELinux: initialized (dev mmcblk1p1, type vfat), uses genfs_contexts
- <7>[02-05 23:45:43.484] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
- <6>[02-05 23:45:43.820] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
- <7>[02-05 23:45:43.820] SELinux: initialized (dev dm-0, type ext4), uses xattr
- <4>[02-05 23:45:43.929] xmdtty: gpio 122 value is 0 ##########
- <6>[02-05 23:45:45.093] sr_class1p5_calib_work: core: Calibration complete: Voltage Nominal=1255000Calib=1025500 margin=0
- <6>[02-05 23:45:45.242] EXT4-fs (dm-0): re-mounted. Opts: (null)
- <6>[02-05 23:45:45.250] EXT4-fs (dm-0): re-mounted. Opts: (null)
- <6>[02-05 23:45:45.421] EXT4-fs (dm-1): mounted filesystem without journal. Opts: (null)
- <7>[02-05 23:45:45.421] SELinux: initialized (dev dm-1, type ext4), uses xattr
- <6>[02-05 23:45:45.914] EXT4-fs (dm-1): re-mounted. Opts: (null)
- <6>[02-05 23:45:45.921] EXT4-fs (dm-1): re-mounted. Opts: (null)
- <3>[02-05 23:45:46.093] init: sys_prop: permission denied uid:1001 name:persist.wifi.mac
- <6>[02-05 23:45:46.210] EXT4-fs (dm-2): mounted filesystem without journal. Opts: (null)
- <7>[02-05 23:45:46.210] SELinux: initialized (dev dm-2, type ext4), uses xattr
- <6>[02-05 23:45:46.734] EXT4-fs (dm-2): re-mounted. Opts: (null)
- <6>[02-05 23:45:46.742] EXT4-fs (dm-2): re-mounted. Opts: (null)
- <6>[02-05 23:45:46.929] EXT4-fs (dm-3): mounted filesystem without journal. Opts: (null)
- <7>[02-05 23:45:46.929] SELinux: initialized (dev dm-3, type ext4), uses xattr
- <6>[02-05 23:45:48.117] EXT4-fs (dm-3): re-mounted. Opts: (null)
- <6>[02-05 23:45:48.125] EXT4-fs (dm-3): re-mounted. Opts: (null)
- <6>[02-05 23:45:48.257] EXT4-fs (dm-4): mounted filesystem without journal. Opts: (null)
- <7>[02-05 23:45:48.257] SELinux: initialized (dev dm-4, type ext4), uses xattr
- <6>[02-05 23:45:48.593] EXT4-fs (dm-4): re-mounted. Opts: (null)
- <6>[02-05 23:45:48.601] EXT4-fs (dm-4): re-mounted. Opts: (null)
- <6>[02-05 23:45:49.062] EXT4-fs (dm-5): mounted filesystem without journal. Opts: (null)
- <7>[02-05 23:45:49.062] SELinux: initialized (dev dm-5, type ext4), uses xattr
- <6>[02-05 23:45:49.125] screen_off_max_freq set to: 600000
- <6>[02-05 23:45:49.671] EXT4-fs (dm-5): re-mounted. Opts: (null)
- <6>[02-05 23:45:49.687] EXT4-fs (dm-5): re-mounted. Opts: (null)
- <6>[02-05 23:45:49.804] EXT4-fs (dm-6): mounted filesystem without journal. Opts: (null)
- <7>[02-05 23:45:49.804] SELinux: initialized (dev dm-6, type ext4), uses xattr
- <6>[02-05 23:45:50.242] EXT4-fs (dm-6): re-mounted. Opts: (null)
- <6>[02-05 23:45:50.281] EXT4-fs (dm-6): re-mounted. Opts: (null)
- <6>[02-05 23:45:50.460] EXT4-fs (dm-7): mounted filesystem without journal. Opts: (null)
- <7>[02-05 23:45:50.460] SELinux: initialized (dev dm-7, type ext4), uses xattr
- <6>[02-05 23:45:51.164] EXT4-fs (dm-7): re-mounted. Opts: (null)
- <6>[02-05 23:45:51.203] EXT4-fs (dm-7): re-mounted. Opts: (null)
- <6>[02-05 23:45:51.710] EXT4-fs (dm-8): mounted filesystem without journal. Opts: (null)
- <7>[02-05 23:45:51.710] SELinux: initialized (dev dm-8, type ext4), uses xattr
- <6>[02-05 23:45:52.070] EXT4-fs (dm-8): re-mounted. Opts: (null)
- <6>[02-05 23:45:52.078] EXT4-fs (dm-8): re-mounted. Opts: (null)
- <6>[02-05 23:45:52.203] EXT4-fs (dm-9): mounted filesystem without journal. Opts: (null)
- <7>[02-05 23:45:52.203] SELinux: initialized (dev dm-9, type ext4), uses xattr
- <6>[02-05 23:45:52.726] EXT4-fs (dm-9): re-mounted. Opts: (null)
- <6>[02-05 23:45:52.734] EXT4-fs (dm-9): re-mounted. Opts: (null)
- <6>[02-05 23:46:04.841] gpu speed enabled: 307200000, ret: 0
- <6>[02-05 23:46:04.873] gpu speed enabled: 384000000, ret: 0
- <6>[02-05 23:46:04.873] gpu speed disabled: 420000000, ret: -19
- <4>[02-05 23:46:05.685] Charger_ADC_Value = 1009, PARM_ADC_Value = 1229
- <6>[02-05 23:46:11.091] sr_class1p5_calib_work: iva: Calibration complete: Voltage Nominal=1114000Calib=1038160 margin=0
- <3>[02-05 23:46:20.427] _omap4_module_wait_ready: Timeout waiting for module enable (ipu_fck: clkctrl = 0x50001)
- <6>[02-05 23:46:20.427] omap-iommu omap-iommu.0: ducati: version 2.1
- <4>[02-05 23:46:20.576] <<< auxclk1_ck
- <4>[02-05 23:46:20.584] <<< release auxclk_ck auxclk1_ck
- <4>[02-05 23:46:20.623] <<< auxclk2_ck
- <4>[02-05 23:46:20.631] <<< release auxclk_ck auxclk2_ck
- <4>[02-05 23:46:20.662] <<< auxclk1_ck
- <4>[02-05 23:46:21.115] <<< release auxclk_ck auxclk1_ck
- <4>[02-05 23:46:21.537] <<< auxclk2_ck
- <4>[02-05 23:46:21.920] <<< release auxclk_ck auxclk2_ck
- <4>[02-05 23:46:35.771] powerbutton_irq: power button status 1
- <4>[02-05 23:46:35.920] powerbutton_irq: power button status 0
- <6>[02-05 23:46:36.857] request_suspend_state: sleep (0->3) at 92434295654 (2014-02-06 02:46:36.863299804 UTC)
- <6>[02-05 23:46:36.857] queue early_suspend_work
- <6>[02-05 23:46:36.857] power_control: device_regulator: cad1bdc0
- <6>[02-05 23:46:36.865] power_control: touch_power : ON -> OFF
- <6>[02-05 23:46:36.896] DSSCOMP: dsscomp_early_suspend
- <6>[02-05 23:46:36.912] DSSCOMP: blanked screen
- <4>[02-05 23:46:36.912] [LCD] : hx8389_panel_power_off
- <3>[02-05 23:46:36.927] [HYUN]dsi_vc_config_l4, DCS_CMD_ENABLE
- <3>[02-05 23:46:37.138] omapdss_dispc omapdss_dispc: omap_device_scale: Unable to find OPP for freq0
- <4>[02-05 23:46:37.990] Unknown PRIVATE command SETSUSPENDMODE 1 - ignored
- <4>[02-05 23:46:57.029] Charger_ADC_Value = 1020, PARM_ADC_Value = 1231
- <4>[02-05 23:47:48.130] Charger_ADC_Value = 1020, PARM_ADC_Value = 1229
- <6>[02-05 23:47:58.201] PM: Syncing filesystems ... done.
- <7>[02-05 23:47:58.201] PM: Preparing system for mem sleep
- <4>[02-05 23:47:58.201] Freezing user space processes ... (elapsed 0.02 seconds) done.
- <4>[02-05 23:47:58.232] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- <7>[02-05 23:47:58.256] PM: Entering mem sleep
- <4>[02-05 23:47:58.256] suspend_set_state: VANA: No configuration
- <4>[02-05 23:47:58.256] Suspending console(s) (use no_console_suspend to debug)
- <6>[02-05 23:47:58.263] ### twl6040_suspend() ###
- <6>[02-05 23:47:58.263] max17043_i2c 4-0036: max17043: max17043_set_alert_level: 32-16=0x10, Next_Alert_Level:16(%)
- <4>[02-05 23:47:58.263] apds9190_suspend [0]
- <6>[02-05 23:47:58.271] PVR: PVRSRVDriverSuspend(pDevice=e7890a00)
- <6>[02-05 23:47:58.271] PVR: SysSystemPrePowerState: Entering state D3
- <6>[02-05 23:47:58.271] PVR: Uninstalling device LISR on IRQ 53 with cookie e6cc6c00
- <6>[02-05 23:47:58.271] PVR: DisableSystemClocks: Disabling System Clocks
- <6>[02-05 23:47:58.537] power_control: device_regulator: cdf0b8c0
- <6>[02-05 23:47:58.545] power_control: vib_power : ON -> OFF
- <6>[02-05 23:47:58.545] PM: suspend of devices complete after 284.179 msecs
- <6>[02-05 23:47:58.545] PM: suspend devices took 0.289 seconds
- <6>[02-05 23:47:58.545] PM: late suspend of devices complete after 2.960 msecs
- <4>[02-05 23:47:58.545] Disabling non-boot CPUs ...
- <5>[02-05 23:47:58.552] CPU1: shutdown
- <6>[02-05 23:47:58.563] Resume caused by IRQ 39, TWL6030-PIH
- <3>[02-05 23:47:58.563] Successfully put all powerdomains to target state
- <6>[02-05 23:48:04.123] Suspended for 5.559 seconds
- <6>[02-05 23:48:04.123] wakeup wake lock: alarm
- <6>[02-05 23:48:04.123] Enabling non-boot CPUs ...
- <4>[02-05 23:48:04.131] CPU1: Booted secondary processor
- <6>[02-05 23:48:04.131] CPU1 is up
- <6>[02-05 23:48:04.139] Switched to NOHz mode on CPU #1
- <6>[02-05 23:48:04.139] PM: early resume of devices complete after 3.234 msecs
- <6>[02-05 23:48:04.139] max17043_i2c 4-0036: max17043: interrupt_handler: GAUGE_INT(21):1
- <6>[02-05 23:48:04.139] power_control: device_regulator: c2f03940
- <6>[02-05 23:48:04.139] power_control: vib_power : ON -> ON
- <6>[02-05 23:48:04.506] PVR: PVRSRVDriverResume(pDevice=e7890a00)
- <6>[02-05 23:48:04.506] PVR: SysSystemPostPowerState: Entering state D0
- <6>[02-05 23:48:04.506] PVR: EnableSystemClocks: Enabling System Clocks
- <6>[02-05 23:48:04.506] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie e6cc6c00
- <4>[02-05 23:48:04.514] Charger_ADC_Value = 1018, PARM_ADC_Value = 1231
- <4>[02-05 23:48:04.514] apds9190_resume [0]
- <7>[02-05 23:48:04.514] lbee9qmb-rfkill lbee9qmb-rfkill.0: lbee9qmb_rfkill_set_power: enabled=0
- <7>[02-05 23:48:04.514] lbee9qmb-rfkill lbee9qmb-rfkill.0: lbee9qmb_rfkill_set_power: new setting is ignored(already set)
- <4>[02-05 23:48:04.514] status = 0
- <4>[02-05 23:48:04.514] status = 0
- <6>[02-05 23:48:04.521] ### twl6040_resume() ###
- <6>[02-05 23:48:04.521] PM: resume of devices complete after 381.652 msecs
- <6>[02-05 23:48:04.521] PM: resume devices took 0.382 seconds
- <7>[02-05 23:48:04.521] PM: Finishing wakeup.
- <4>[02-05 23:48:04.521] Restarting tasks ... done.
- <6>[02-05 23:48:04.537] suspend: exit suspend, ret = 0 (2014-02-06 02:48:04.547137689 UTC)
- <6>[02-05 23:48:07.217] PM: Syncing filesystems ... done.
- <7>[02-05 23:48:07.217] PM: Preparing system for mem sleep
- <4>[02-05 23:48:07.217] Freezing user space processes ... (elapsed 0.02 seconds) done.
- <4>[02-05 23:48:07.631] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- <7>[02-05 23:48:07.654] PM: Entering mem sleep
- <4>[02-05 23:48:07.654] suspend_set_state: VANA: No configuration
- <4>[02-05 23:48:07.654] Suspending console(s) (use no_console_suspend to debug)
- <6>[02-05 23:48:07.662] ### twl6040_suspend() ###
- <6>[02-05 23:48:07.670] max17043_i2c 4-0036: max17043: max17043_set_alert_level: 32-16=0x10, Next_Alert_Level:16(%)
- <4>[02-05 23:48:07.670] apds9190_suspend [0]
- <6>[02-05 23:48:07.678] PVR: PVRSRVDriverSuspend(pDevice=e7890a00)
- <6>[02-05 23:48:07.678] PVR: SysSystemPrePowerState: Entering state D3
- <6>[02-05 23:48:07.678] PVR: Uninstalling device LISR on IRQ 53 with cookie e6cc6c00
- <6>[02-05 23:48:07.678] PVR: DisableSystemClocks: Disabling System Clocks
- <6>[02-05 23:48:07.678] power_control: device_regulator: d1201fc0
- <6>[02-05 23:48:07.678] power_control: vib_power : ON -> OFF
- <6>[02-05 23:48:07.678] PM: suspend of devices complete after 18.552 msecs
- <6>[02-05 23:48:07.678] PM: suspend devices took 0.023 seconds
- <6>[02-05 23:48:07.685] PM: late suspend of devices complete after 1.861 msecs
- <4>[02-05 23:48:07.685] Disabling non-boot CPUs ...
- <5>[02-05 23:48:07.685] CPU1: shutdown
- <6>[02-05 23:48:07.694] Resume caused by I/O pad: CONTROL_PADCONF_WAKEUPEVENT_4[31]
- <6>[02-05 23:48:07.694] Resume caused by I/O pad: CONTROL_PADCONF_WAKEUPEVENT_5[6]
- <3>[02-05 23:48:07.694] Successfully put all powerdomains to target state
- <6>[02-05 23:48:31.133] Suspended for 23.439 seconds
- <6>[02-05 23:48:31.133] Enabling non-boot CPUs ...
- <4>[02-05 23:48:31.141] CPU1: Booted secondary processor
- <6>[02-05 23:48:31.141] CPU1 is up
- <6>[02-05 23:48:31.149] Switched to NOHz mode on CPU #1
- <6>[02-05 23:48:31.149] PM: early resume of devices complete after 3.234 msecs
- <6>[02-05 23:48:31.149] wakeup wake lock: omap4-keypad
- <6>[02-05 23:48:31.149] max17043_i2c 4-0036: max17043: interrupt_handler: GAUGE_INT(21):1
- <6>[02-05 23:48:31.149] power_control: device_regulator: d1201ac0
- <6>[02-05 23:48:31.149] power_control: vib_power : ON -> ON
- <6>[02-05 23:48:31.516] PVR: PVRSRVDriverResume(pDevice=e7890a00)
- <6>[02-05 23:48:31.516] PVR: SysSystemPostPowerState: Entering state D0
- <6>[02-05 23:48:31.516] PVR: EnableSystemClocks: Enabling System Clocks
- <6>[02-05 23:48:31.516] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie e6cc6c00
- <4>[02-05 23:48:31.524] Charger_ADC_Value = 1018, PARM_ADC_Value = 1232
- <4>[02-05 23:48:31.524] apds9190_resume [0]
- <7>[02-05 23:48:31.524] lbee9qmb-rfkill lbee9qmb-rfkill.0: lbee9qmb_rfkill_set_power: enabled=0
- <7>[02-05 23:48:31.524] lbee9qmb-rfkill lbee9qmb-rfkill.0: lbee9qmb_rfkill_set_power: new setting is ignored(already set)
- <4>[02-05 23:48:31.524] status = 0
- <4>[02-05 23:48:31.524] status = 0
- <6>[02-05 23:48:31.532] ### twl6040_resume() ###
- <6>[02-05 23:48:31.532] PM: resume of devices complete after 382.477 msecs
- <6>[02-05 23:48:31.532] PM: resume devices took 0.382 seconds
- <7>[02-05 23:48:31.532] PM: Finishing wakeup.
- <4>[02-05 23:48:31.532] Restarting tasks ... done.
- <6>[02-05 23:48:31.547] suspend: exit suspend, ret = 0 (2014-02-06 02:48:31.560688582 UTC)
- <6>[02-05 23:48:31.571] request_suspend_state: wakeup (3->0) at 178150483260 (2014-02-06 02:48:31.578480319 UTC)
- <6>[02-05 23:48:31.571] queue late_resume_work
- <4>[02-05 23:48:31.571] [LCD] : hx8389_panel_power_on
- <3>[02-05 23:48:31.579] omapdss_dispc omapdss_dispc: omap_device_scale: Unable to find OPP for freq0
- <6>[02-05 23:48:31.868] DSSCOMP: dsscomp_late_resume
- <6>[02-05 23:48:31.868] power_control: device_regulator: c7e35bc0
- <6>[02-05 23:48:31.868] power_control: touch_power : ON -> ON
- <3>[02-05 23:48:31.899] in hpd work 0, state=0
- <4>[02-05 23:48:31.977] Unknown PRIVATE command SETSUSPENDMODE 0 - ignored
- <6>[02-05 23:48:32.024] binder: 512:816 transaction failed 29189, size 212-0
- <4>[02-05 23:49:21.680] Charger_ADC_Value = 1008, PARM_ADC_Value = 1230
- <4>[02-05 23:50:11.805] Charger_ADC_Value = 1013, PARM_ADC_Value = 1231
- <4>[02-05 23:50:30.180] powerbutton_irq: power button status 1
- <4>[02-05 23:50:30.336] powerbutton_irq: power button status 0
- <6>[02-05 23:50:31.133] request_suspend_state: sleep (0->3) at 297712708603 (2014-02-06 02:50:31.140705662 UTC)
- <6>[02-05 23:50:31.133] queue early_suspend_work
- <6>[02-05 23:50:31.133] power_control: device_regulator: d58abec0
- <6>[02-05 23:50:31.133] power_control: touch_power : ON -> OFF
- <6>[02-05 23:50:31.164] DSSCOMP: dsscomp_early_suspend
- <6>[02-05 23:50:31.172] DSSCOMP: blanked screen
- <4>[02-05 23:50:31.172] [LCD] : hx8389_panel_power_off
- <3>[02-05 23:50:31.196] [HYUN]dsi_vc_config_l4, DCS_CMD_ENABLE
- <3>[02-05 23:50:31.407] omapdss_dispc omapdss_dispc: omap_device_scale: Unable to find OPP for freq0
- <4>[02-05 23:50:31.875] Unknown PRIVATE command SETSUSPENDMODE 1 - ignored
- <6>[02-05 23:50:35.414] PM: Syncing filesystems ... done.
- <7>[02-05 23:50:35.414] PM: Preparing system for mem sleep
- <4>[02-05 23:50:35.422] Freezing user space processes ... (elapsed 0.03 seconds) done.
- <4>[02-05 23:50:35.454] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- <7>[02-05 23:50:35.477] PM: Entering mem sleep
- <4>[02-05 23:50:35.477] suspend_set_state: VANA: No configuration
- <4>[02-05 23:50:35.477] Suspending console(s) (use no_console_suspend to debug)
- <6>[02-05 23:50:35.477] ### twl6040_suspend() ###
- <6>[02-05 23:50:35.485] max17043_i2c 4-0036: max17043: max17043_set_alert_level: 32-16=0x10, Next_Alert_Level:16(%)
- <4>[02-05 23:50:35.485] apds9190_suspend [0]
- <6>[02-05 23:50:35.493] PVR: PVRSRVDriverSuspend(pDevice=e7890a00)
- <6>[02-05 23:50:35.493] PVR: SysSystemPrePowerState: Entering state D3
- <6>[02-05 23:50:35.493] PVR: Uninstalling device LISR on IRQ 53 with cookie e6cc6c00
- <6>[02-05 23:50:35.493] PVR: DisableSystemClocks: Disabling System Clocks
- <6>[02-05 23:50:35.735] power_control: device_regulator: d58ab7c0
- <6>[02-05 23:50:35.743] power_control: vib_power : ON -> OFF
- <6>[02-05 23:50:35.743] PM: suspend of devices complete after 260.925 msecs
- <6>[02-05 23:50:35.743] PM: suspend devices took 0.265 seconds
- <6>[02-05 23:50:35.743] PM: late suspend of devices complete after 2.990 msecs
- <4>[02-05 23:50:35.743] Disabling non-boot CPUs ...
- <5>[02-05 23:50:35.743] CPU1: shutdown
- <6>[02-05 23:50:35.757] Resume caused by IRQ 39, TWL6030-PIH
- <3>[02-05 23:50:35.757] Successfully put all powerdomains to target state
- <6>[02-05 23:50:39.123] Suspended for 3.365 seconds
- <6>[02-05 23:50:39.123] Enabling non-boot CPUs ...
- <4>[02-05 23:50:39.131] CPU1: Booted secondary processor
- <6>[02-05 23:50:39.131] CPU1 is up
- <6>[02-05 23:50:39.139] Switched to NOHz mode on CPU #1
- <6>[02-05 23:50:39.139] PM: early resume of devices complete after 3.448 msecs
- <6>[02-05 23:50:39.139] max17043_i2c 4-0036: max17043: interrupt_handler: GAUGE_INT(21):1
- <6>[02-05 23:50:39.139] power_control: device_regulator: d58ab4c0
- <6>[02-05 23:50:39.139] power_control: vib_power : ON -> ON
- <6>[02-05 23:50:39.490] PVR: PVRSRVDriverResume(pDevice=e7890a00)
- <6>[02-05 23:50:39.490] PVR: SysSystemPostPowerState: Entering state D0
- <6>[02-05 23:50:39.490] PVR: EnableSystemClocks: Enabling System Clocks
- <6>[02-05 23:50:39.490] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie e6cc6c00
- <4>[02-05 23:50:39.506] Charger_ADC_Value = 1013, PARM_ADC_Value = 1231
- <6>[02-05 23:50:39.506] wakeup wake lock: power-supply
- <4>[02-05 23:50:39.506] apds9190_resume [0]
- <7>[02-05 23:50:39.506] lbee9qmb-rfkill lbee9qmb-rfkill.0: lbee9qmb_rfkill_set_power: enabled=0
- <7>[02-05 23:50:39.506] lbee9qmb-rfkill lbee9qmb-rfkill.0: lbee9qmb_rfkill_set_power: new setting is ignored(already set)
- <4>[02-05 23:50:39.506] status = 0
- <4>[02-05 23:50:39.506] status = 0
- <6>[02-05 23:50:39.506] ### twl6040_resume() ###
- <6>[02-05 23:50:39.506] PM: resume of devices complete after 371.215 msecs
- <6>[02-05 23:50:39.514] PM: resume devices took 0.375 seconds
- <7>[02-05 23:50:39.514] PM: Finishing wakeup.
- <4>[02-05 23:50:39.514] Restarting tasks ... done.
- <6>[02-05 23:50:39.529] suspend: exit suspend, ret = 0 (2014-02-06 02:50:39.535938810 UTC)
- <6>[02-05 23:50:39.529] active wake lock mmc1_detect
- <6>[02-05 23:50:39.529] PM: Syncing filesystems ... done.
- <7>[02-05 23:50:39.529] PM: Preparing system for mem sleep
- <4>[02-05 23:50:39.529] Freezing user space processes ...
- <6>[02-05 23:50:39.553] active wake lock alarm_rtc, time left 125
- <4>[02-05 23:50:39.553]
- <3>[02-05 23:50:39.553] Freezing of user space aborted
- <4>[02-05 23:50:39.553]
- <4>[02-05 23:50:39.553] Restarting tasks ... done.
- <6>[02-05 23:50:39.560] suspend: exit suspend, ret = -16 (2014-02-06 02:50:39.568287442 UTC)
- <6>[02-05 23:50:40.396] PM: Syncing filesystems ... done.
- <7>[02-05 23:50:40.396] PM: Preparing system for mem sleep
- <4>[02-05 23:50:40.396] Freezing user space processes ... (elapsed 0.07 seconds) done.
- <4>[02-05 23:50:40.756] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- <7>[02-05 23:50:40.779] PM: Entering mem sleep
- <4>[02-05 23:50:40.779] suspend_set_state: VANA: No configuration
- <4>[02-05 23:50:40.779] Suspending console(s) (use no_console_suspend to debug)
- <6>[02-05 23:50:40.787] ### twl6040_suspend() ###
- <6>[02-05 23:50:40.795] max17043_i2c 4-0036: max17043: max17043_set_alert_level: 32-16=0x10, Next_Alert_Level:16(%)
- <4>[02-05 23:50:40.795] apds9190_suspend [0]
- <6>[02-05 23:50:40.803] PVR: PVRSRVDriverSuspend(pDevice=e7890a00)
- <6>[02-05 23:50:40.803] PVR: SysSystemPrePowerState: Entering state D3
- <6>[02-05 23:50:40.803] PVR: Uninstalling device LISR on IRQ 53 with cookie e6cc6c00
- <6>[02-05 23:50:40.803] PVR: DisableSystemClocks: Disabling System Clocks
- <6>[02-05 23:50:40.803] power_control: device_regulator: d58abb00
- <6>[02-05 23:50:40.803] power_control: vib_power : ON -> OFF
- <6>[02-05 23:50:40.803] PM: suspend of devices complete after 18.646 msecs
- <6>[02-05 23:50:40.803] PM: suspend devices took 0.023 seconds
- <6>[02-05 23:50:40.810] PM: late suspend of devices complete after 1.861 msecs
- <4>[02-05 23:50:40.810] Disabling non-boot CPUs ...
- <5>[02-05 23:50:40.810] CPU1: shutdown
- <6>[02-05 23:50:40.819] Resume caused by IRQ 39, TWL6030-PIH
- <3>[02-05 23:50:40.819] Successfully put all powerdomains to target state
- <6>[02-05 23:51:15.123] Suspended for 34.303 seconds
- <6>[02-05 23:51:15.123] wakeup wake lock: alarm
- <6>[02-05 23:51:15.123] Enabling non-boot CPUs ...
- <4>[02-05 23:51:15.131] CPU1: Booted secondary processor
- <6>[02-05 23:51:15.131] CPU1 is up
- <6>[02-05 23:51:15.138] Switched to NOHz mode on CPU #1
- <6>[02-05 23:51:15.138] PM: early resume of devices complete after 3.021 msecs
- <6>[02-05 23:51:15.138] max17043_i2c 4-0036: max17043: interrupt_handler: GAUGE_INT(21):1
- <6>[02-05 23:51:15.138] power_control: device_regulator: d58abac0
- <6>[02-05 23:51:15.138] power_control: vib_power : ON -> ON
- <6>[02-05 23:51:15.482] PVR: PVRSRVDriverResume(pDevice=e7890a00)
- <6>[02-05 23:51:15.482] PVR: SysSystemPostPowerState: Entering state D0
- <6>[02-05 23:51:15.482] PVR: EnableSystemClocks: Enabling System Clocks
- <6>[02-05 23:51:15.482] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie e6cc6c00
- <4>[02-05 23:51:15.498] Charger_ADC_Value = 1015, PARM_ADC_Value = 1230
- <4>[02-05 23:51:15.498] apds9190_resume [0]
- <7>[02-05 23:51:15.498] lbee9qmb-rfkill lbee9qmb-rfkill.0: lbee9qmb_rfkill_set_power: enabled=0
- <7>[02-05 23:51:15.498] lbee9qmb-rfkill lbee9qmb-rfkill.0: lbee9qmb_rfkill_set_power: new setting is ignored(already set)
- <4>[02-05 23:51:15.498] status = 0
- <4>[02-05 23:51:15.498] status = 0
- <6>[02-05 23:51:15.498] ### twl6040_resume() ###
- <6>[02-05 23:51:15.498] PM: resume of devices complete after 363.861 msecs
- <6>[02-05 23:51:15.506] PM: resume devices took 0.367 seconds
- <7>[02-05 23:51:15.506] PM: Finishing wakeup.
- <4>[02-05 23:51:15.506] Restarting tasks ... done.
- <6>[02-05 23:51:15.529] suspend: exit suspend, ret = 0 (2014-02-06 02:51:15.535236887 UTC)
- <6>[02-05 23:51:20.357] PM: Syncing filesystems ... done.
- <7>[02-05 23:51:20.357] PM: Preparing system for mem sleep
- <4>[02-05 23:51:20.357] Freezing user space processes ... (elapsed 0.02 seconds) done.
- <4>[02-05 23:51:20.763] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- <7>[02-05 23:51:20.787] PM: Entering mem sleep
- <4>[02-05 23:51:20.787] suspend_set_state: VANA: No configuration
- <4>[02-05 23:51:20.787] Suspending console(s) (use no_console_suspend to debug)
- <6>[02-05 23:51:20.795] ### twl6040_suspend() ###
- <6>[02-05 23:51:20.802] max17043_i2c 4-0036: max17043: max17043_set_alert_level: 32-16=0x10, Next_Alert_Level:16(%)
- <4>[02-05 23:51:20.802] apds9190_suspend [0]
- <6>[02-05 23:51:20.810] PVR: PVRSRVDriverSuspend(pDevice=e7890a00)
- <6>[02-05 23:51:20.810] PVR: SysSystemPrePowerState: Entering state D3
- <6>[02-05 23:51:20.810] PVR: Uninstalling device LISR on IRQ 53 with cookie e6cc6c00
- <6>[02-05 23:51:20.810] PVR: DisableSystemClocks: Disabling System Clocks
- <6>[02-05 23:51:20.810] power_control: device_regulator: d7f6ea00
- <6>[02-05 23:51:20.810] power_control: vib_power : ON -> OFF
- <6>[02-05 23:51:20.810] PM: suspend of devices complete after 18.524 msecs
- <6>[02-05 23:51:20.810] PM: suspend devices took 0.023 seconds
- <6>[02-05 23:51:20.818] PM: late suspend of devices complete after 1.922 msecs
- <4>[02-05 23:51:20.818] Disabling non-boot CPUs ...
- <5>[02-05 23:51:20.818] CPU1: shutdown
- <6>[02-05 23:51:20.826] Resume caused by IRQ 39, TWL6030-PIH
- <3>[02-05 23:51:20.826] Successfully put all powerdomains to target state
- <6>[02-05 23:51:24.123] Suspended for 3.297 seconds
- <6>[02-05 23:51:24.123] Enabling non-boot CPUs ...
- <4>[02-05 23:51:24.131] CPU1: Booted secondary processor
- <6>[02-05 23:51:24.131] CPU1 is up
- <6>[02-05 23:51:24.138] Switched to NOHz mode on CPU #1
- <6>[02-05 23:51:24.138] PM: early resume of devices complete after 3.204 msecs
- <6>[02-05 23:51:24.138] max17043_i2c 4-0036: max17043: interrupt_handler: GAUGE_INT(21):1
- <6>[02-05 23:51:24.138] power_control: device_regulator: d7f6ea80
- <6>[02-05 23:51:24.138] power_control: vib_power : ON -> ON
- <6>[02-05 23:51:24.482] PVR: PVRSRVDriverResume(pDevice=e7890a00)
- <6>[02-05 23:51:24.482] PVR: SysSystemPostPowerState: Entering state D0
- <6>[02-05 23:51:24.482] PVR: EnableSystemClocks: Enabling System Clocks
- <6>[02-05 23:51:24.482] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie e6cc6c00
- <4>[02-05 23:51:24.498] Charger_ADC_Value = 1014, PARM_ADC_Value = 1232
- <6>[02-05 23:51:24.498] wakeup wake lock: power-supply
- <4>[02-05 23:51:24.498] apds9190_resume [0]
- <7>[02-05 23:51:24.498] lbee9qmb-rfkill lbee9qmb-rfkill.0: lbee9qmb_rfkill_set_power: enabled=0
- <7>[02-05 23:51:24.498] lbee9qmb-rfkill lbee9qmb-rfkill.0: lbee9qmb_rfkill_set_power: new setting is ignored(already set)
- <4>[02-05 23:51:24.498] status = 0
- <4>[02-05 23:51:24.498] status = 0
- <6>[02-05 23:51:24.498] ### twl6040_resume() ###
- <6>[02-05 23:51:24.498] PM: resume of devices complete after 363.861 msecs
- <6>[02-05 23:51:24.498] PM: resume devices took 0.359 seconds
- <7>[02-05 23:51:24.506] PM: Finishing wakeup.
- <4>[02-05 23:51:24.506] Restarting tasks ... done.
- <6>[02-05 23:51:24.521] suspend: exit suspend, ret = 0 (2014-02-06 02:51:24.529926824 UTC)
- <6>[02-05 23:51:24.521] active wake lock mmc1_detect
- <6>[02-05 23:51:24.521] active wake lock event8-512
- <6>[02-05 23:51:24.521] active wake lock event5-512
- <6>[02-05 23:51:24.521] active wake lock event4-512
- <6>[02-05 23:51:24.521] active wake lock event3-512
- <6>[02-05 23:51:24.521] active wake lock event2-512
- <6>[02-05 23:51:29.670] PM: Syncing filesystems ... done.
- <7>[02-05 23:51:29.670] PM: Preparing system for mem sleep
- <4>[02-05 23:51:29.670] Freezing user space processes ... (elapsed 0.03 seconds) done.
- <4>[02-05 23:51:30.029] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- <7>[02-05 23:51:30.053] PM: Entering mem sleep
- <4>[02-05 23:51:30.053] suspend_set_state: VANA: No configuration
- <4>[02-05 23:51:30.053] Suspending console(s) (use no_console_suspend to debug)
- <6>[02-05 23:51:30.060] ### twl6040_suspend() ###
- <6>[02-05 23:51:30.068] max17043_i2c 4-0036: max17043: max17043_set_alert_level: 32-16=0x10, Next_Alert_Level:16(%)
- <4>[02-05 23:51:30.068] apds9190_suspend [0]
- <6>[02-05 23:51:30.076] PVR: PVRSRVDriverSuspend(pDevice=e7890a00)
- <6>[02-05 23:51:30.076] PVR: SysSystemPrePowerState: Entering state D3
- <6>[02-05 23:51:30.076] PVR: Uninstalling device LISR on IRQ 53 with cookie e6cc6c00
- <6>[02-05 23:51:30.076] PVR: DisableSystemClocks: Disabling System Clocks
- <6>[02-05 23:51:30.076] power_control: device_regulator: d7f6eb40
- <6>[02-05 23:51:30.076] power_control: vib_power : ON -> OFF
- <6>[02-05 23:51:30.076] PM: suspend of devices complete after 18.521 msecs
- <6>[02-05 23:51:30.076] PM: suspend devices took 0.023 seconds
- <6>[02-05 23:51:30.084] PM: late suspend of devices complete after 1.891 msecs
- <4>[02-05 23:51:30.084] Disabling non-boot CPUs ...
- <5>[02-05 23:51:30.084] CPU1: shutdown
- <6>[02-05 23:51:30.092] Resume caused by IRQ 39, TWL6030-PIH
- <3>[02-05 23:51:30.092] Successfully put all powerdomains to target state
- <6>[02-05 23:51:33.123] Suspended for 3.030 seconds
- <6>[02-05 23:51:33.123] Enabling non-boot CPUs ...
- <4>[02-05 23:51:33.131] CPU1: Booted secondary processor
- <6>[02-05 23:51:33.131] CPU1 is up
- <6>[02-05 23:51:33.138] Switched to NOHz mode on CPU #1
- <6>[02-05 23:51:33.138] PM: early resume of devices complete after 2.960 msecs
- <6>[02-05 23:51:33.138] max17043_i2c 4-0036: max17043: interrupt_handler: GAUGE_INT(21):1
- <6>[02-05 23:51:33.138] power_control: device_regulator: d7f6ec40
- <6>[02-05 23:51:33.138] power_control: vib_power : ON -> ON
- <6>[02-05 23:51:33.498] PVR: PVRSRVDriverResume(pDevice=e7890a00)
- <6>[02-05 23:51:33.498] PVR: SysSystemPostPowerState: Entering state D0
- <6>[02-05 23:51:33.498] PVR: EnableSystemClocks: Enabling System Clocks
- <6>[02-05 23:51:33.498] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie e6cc6c00
- <4>[02-05 23:51:33.506] Charger_ADC_Value = 1015, PARM_ADC_Value = 1232
- <6>[02-05 23:51:33.506] wakeup wake lock: power-supply
- <4>[02-05 23:51:33.506] apds9190_resume [0]
- <7>[02-05 23:51:33.506] lbee9qmb-rfkill lbee9qmb-rfkill.0: lbee9qmb_rfkill_set_power: enabled=0
- <7>[02-05 23:51:33.506] lbee9qmb-rfkill lbee9qmb-rfkill.0: lbee9qmb_rfkill_set_power: new setting is ignored(already set)
- <4>[02-05 23:51:33.506] status = 0
- <4>[02-05 23:51:33.506] status = 0
- <6>[02-05 23:51:33.513] ### twl6040_resume() ###
- <6>[02-05 23:51:33.513] PM: resume of devices complete after 374.970 msecs
- <6>[02-05 23:51:33.513] PM: resume devices took 0.375 seconds
- <7>[02-05 23:51:33.513] PM: Finishing wakeup.
- <4>[02-05 23:51:33.513] Restarting tasks ... done.
- <6>[02-05 23:51:33.529] suspend: exit suspend, ret = 0 (2014-02-06 02:51:33.539238963 UTC)
- <6>[02-05 23:51:33.529] active wake lock mmc1_detect
- <6>[02-05 23:51:33.529] active wake lock event8-512
- <6>[02-05 23:51:33.529] active wake lock event5-512
- <6>[02-05 23:51:33.529] active wake lock event4-512
- <6>[02-05 23:51:33.529] active wake lock event3-512
- <6>[02-05 23:51:33.529] active wake lock event2-512
- <6>[02-05 23:51:33.537] PM: Syncing filesystems ... done.
- <7>[02-05 23:51:33.537] PM: Preparing system for mem sleep
- <4>[02-05 23:51:33.537] Freezing user space processes ...
- <6>[02-05 23:51:33.545] active wake lock alarm_rtc, time left 127
- <4>[02-05 23:51:33.545]
- <3>[02-05 23:51:33.545] Freezing of user space aborted
- <4>[02-05 23:51:33.545]
- <4>[02-05 23:51:33.545] Restarting tasks ... done.
- <6>[02-05 23:51:33.560] suspend: exit suspend, ret = -16 (2014-02-06 02:51:33.566643763 UTC)
- <6>[02-05 23:51:37.974] PM: Syncing filesystems ... done.
- <7>[02-05 23:51:37.974] PM: Preparing system for mem sleep
- <4>[02-05 23:51:37.974] Freezing user space processes ... (elapsed 0.02 seconds) done.
- <4>[02-05 23:51:38.006] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- <7>[02-05 23:51:38.029] PM: Entering mem sleep
- <4>[02-05 23:51:38.029] suspend_set_state: VANA: No configuration
- <4>[02-05 23:51:38.029] Suspending console(s) (use no_console_suspend to debug)
- <6>[02-05 23:51:38.037] ### twl6040_suspend() ###
- <6>[02-05 23:51:38.037] max17043_i2c 4-0036: max17043: max17043_set_alert_level: 32-16=0x10, Next_Alert_Level:16(%)
- <4>[02-05 23:51:38.037] apds9190_suspend [0]
- <6>[02-05 23:51:38.045] PVR: PVRSRVDriverSuspend(pDevice=e7890a00)
- <6>[02-05 23:51:38.045] PVR: SysSystemPrePowerState: Entering state D3
- <6>[02-05 23:51:38.045] PVR: Uninstalling device LISR on IRQ 53 with cookie e6cc6c00
- <6>[02-05 23:51:38.045] PVR: DisableSystemClocks: Disabling System Clocks
- <6>[02-05 23:51:38.045] power_control: device_regulator: d7f6e440
- <6>[02-05 23:51:38.045] power_control: vib_power : ON -> OFF
- <6>[02-05 23:51:38.045] PM: suspend of devices complete after 13.641 msecs
- <6>[02-05 23:51:38.045] PM: suspend devices took 0.015 seconds
- <6>[02-05 23:51:38.045] PM: late suspend of devices complete after 1.861 msecs
- <4>[02-05 23:51:38.045] Disabling non-boot CPUs ...
- <5>[02-05 23:51:38.053] CPU1: shutdown
- <6>[02-05 23:51:38.059] Resume caused by IRQ 39, TWL6030-PIH
- <3>[02-05 23:51:38.059] Successfully put all powerdomains to target state
- <6>[02-05 23:51:42.123] Suspended for 4.063 seconds
- <6>[02-05 23:51:42.123] Enabling non-boot CPUs ...
- <4>[02-05 23:51:42.131] CPU1: Booted secondary processor
- <6>[02-05 23:51:42.131] CPU1 is up
- <6>[02-05 23:51:42.131] PM: early resume of devices complete after 2.807 msecs
- <6>[02-05 23:51:42.131] max17043_i2c 4-0036: max17043: interrupt_handler: GAUGE_INT(21):1
- <6>[02-05 23:51:42.138] Switched to NOHz mode on CPU #1
- <6>[02-05 23:51:42.138] power_control: device_regulator: d7f6e900
- <6>[02-05 23:51:42.138] power_control: vib_power : ON -> ON
- <6>[02-05 23:51:42.490] PVR: PVRSRVDriverResume(pDevice=e7890a00)
- <6>[02-05 23:51:42.490] PVR: SysSystemPostPowerState: Entering state D0
- <6>[02-05 23:51:42.490] PVR: EnableSystemClocks: Enabling System Clocks
- <6>[02-05 23:51:42.490] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie e6cc6c00
- <4>[02-05 23:51:42.506] Charger_ADC_Value = 1015, PARM_ADC_Value = 1230
- <6>[02-05 23:51:42.506] wakeup wake lock: power-supply
- <4>[02-05 23:51:42.506] apds9190_resume [0]
- <7>[02-05 23:51:42.506] lbee9qmb-rfkill lbee9qmb-rfkill.0: lbee9qmb_rfkill_set_power: enabled=0
- <7>[02-05 23:51:42.506] lbee9qmb-rfkill lbee9qmb-rfkill.0: lbee9qmb_rfkill_set_power: new setting is ignored(already set)
- <4>[02-05 23:51:42.506] status = 0
- <4>[02-05 23:51:42.506] status = 0
- <6>[02-05 23:51:42.506] ### twl6040_resume() ###
- <6>[02-05 23:51:42.506] PM: resume of devices complete after 372.772 msecs
- <6>[02-05 23:51:42.506] PM: resume devices took 0.367 seconds
- <7>[02-05 23:51:42.513] PM: Finishing wakeup.
- <4>[02-05 23:51:42.513] Restarting tasks ... done.
- <6>[02-05 23:51:42.529] suspend: exit suspend, ret = 0 (2014-02-06 02:51:42.536370315 UTC)
- <6>[02-05 23:51:42.529] active wake lock mmc1_detect
- <6>[02-05 23:51:42.529] active wake lock event8-512
- <6>[02-05 23:51:42.529] active wake lock event5-512
- <6>[02-05 23:51:42.529] active wake lock event4-512
- <6>[02-05 23:51:42.529] active wake lock event3-512
- <6>[02-05 23:51:42.529] active wake lock event2-512
- <6>[02-05 23:51:42.529] active wake lock alarm, time left 637
- <6>[02-05 23:51:43.607] PM: Syncing filesystems ... done.
- <7>[02-05 23:51:43.607] PM: Preparing system for mem sleep
- <4>[02-05 23:51:43.607] Freezing user space processes ... (elapsed 0.02 seconds) done.
- <4>[02-05 23:51:43.638] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- <7>[02-05 23:51:43.662] PM: Entering mem sleep
- <4>[02-05 23:51:43.662] suspend_set_state: VANA: No configuration
- <4>[02-05 23:51:43.662] Suspending console(s) (use no_console_suspend to debug)
- <6>[02-05 23:51:43.670] ### twl6040_suspend() ###
- <6>[02-05 23:51:43.678] max17043_i2c 4-0036: max17043: max17043_set_alert_level: 32-16=0x10, Next_Alert_Level:16(%)
- <4>[02-05 23:51:43.678] apds9190_suspend [0]
- <6>[02-05 23:51:43.678] PVR: PVRSRVDriverSuspend(pDevice=e7890a00)
- <6>[02-05 23:51:43.678] PVR: SysSystemPrePowerState: Entering state D3
- <6>[02-05 23:51:43.678] PVR: Uninstalling device LISR on IRQ 53 with cookie e6cc6c00
- <6>[02-05 23:51:43.678] PVR: DisableSystemClocks: Disabling System Clocks
- <6>[02-05 23:51:43.685] power_control: device_regulator: d7f6ed00
- <6>[02-05 23:51:43.685] power_control: vib_power : ON -> OFF
- <6>[02-05 23:51:43.685] PM: suspend of devices complete after 16.235 msecs
- <6>[02-05 23:51:43.685] PM: suspend devices took 0.023 seconds
- <6>[02-05 23:51:43.685] PM: late suspend of devices complete after 1.861 msecs
- <4>[02-05 23:51:43.685] Disabling non-boot CPUs ...
- <5>[02-05 23:51:43.685] CPU1: shutdown
- <6>[02-05 23:51:43.700] Resume caused by IRQ 39, TWL6030-PIH
- <3>[02-05 23:51:43.700] Successfully put all powerdomains to target state
- <6>[02-05 23:52:30.123] Suspended for 46.423 seconds
- <6>[02-05 23:52:30.123] wakeup wake lock: alarm
- <6>[02-05 23:52:30.123] Enabling non-boot CPUs ...
- <4>[02-05 23:52:30.131] CPU1: Booted secondary processor
- <6>[02-05 23:52:30.131] CPU1 is up
- <6>[02-05 23:52:30.131] PM: early resume of devices complete after 2.319 msecs
- <6>[02-05 23:52:30.131] max17043_i2c 4-0036: max17043: interrupt_handler: GAUGE_INT(21):1
- <6>[02-05 23:52:30.131] power_control: device_regulator: d7f6e2c0
- <6>[02-05 23:52:30.131] power_control: vib_power : ON -> ON
- <6>[02-05 23:52:30.138] Switched to NOHz mode on CPU #1
- <6>[02-05 23:52:30.490] PVR: PVRSRVDriverResume(pDevice=e7890a00)
- <6>[02-05 23:52:30.490] PVR: SysSystemPostPowerState: Entering state D0
- <6>[02-05 23:52:30.490] PVR: EnableSystemClocks: Enabling System Clocks
- <6>[02-05 23:52:30.490] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie e6cc6c00
- <4>[02-05 23:52:30.498] Charger_ADC_Value = 1015, PARM_ADC_Value = 1232
- <4>[02-05 23:52:30.498] apds9190_resume [0]
- <7>[02-05 23:52:30.498] lbee9qmb-rfkill lbee9qmb-rfkill.0: lbee9qmb_rfkill_set_power: enabled=0
- <7>[02-05 23:52:30.498] lbee9qmb-rfkill lbee9qmb-rfkill.0: lbee9qmb_rfkill_set_power: new setting is ignored(already set)
- <4>[02-05 23:52:30.498] status = 0
- <4>[02-05 23:52:30.498] status = 0
- <6>[02-05 23:52:30.506] ### twl6040_resume() ###
- <6>[02-05 23:52:30.506] PM: resume of devices complete after 370.880 msecs
- <6>[02-05 23:52:30.506] PM: resume devices took 0.375 seconds
- <7>[02-05 23:52:30.506] PM: Finishing wakeup.
- <4>[02-05 23:52:30.506] Restarting tasks ... done.
- <6>[02-05 23:52:30.521] suspend: exit suspend, ret = 0 (2014-02-06 02:52:30.532097862 UTC)
- <6>[02-05 23:52:33.490] PM: Syncing filesystems ... done.
- <7>[02-05 23:52:33.490] PM: Preparing system for mem sleep
- <4>[02-05 23:52:33.490] Freezing user space processes ... (elapsed 0.03 seconds) done.
- <4>[02-05 23:52:33.904] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- <7>[02-05 23:52:33.928] PM: Entering mem sleep
- <4>[02-05 23:52:33.928] suspend_set_state: VANA: No configuration
- <4>[02-05 23:52:33.928] Suspending console(s) (use no_console_suspend to debug)
- <6>[02-05 23:52:33.928] ### twl6040_suspend() ###
- <6>[02-05 23:52:33.935] max17043_i2c 4-0036: max17043: max17043_set_alert_level: 32-16=0x10, Next_Alert_Level:16(%)
- <4>[02-05 23:52:33.935] apds9190_suspend [0]
- <6>[02-05 23:52:33.943] PVR: PVRSRVDriverSuspend(pDevice=e7890a00)
- <6>[02-05 23:52:33.943] PVR: SysSystemPrePowerState: Entering state D3
- <6>[02-05 23:52:33.943] PVR: Uninstalling device LISR on IRQ 53 with cookie e6cc6c00
- <6>[02-05 23:52:33.943] PVR: DisableSystemClocks: Disabling System Clocks
- <6>[02-05 23:52:33.943] power_control: device_regulator: d7f6edc0
- <6>[02-05 23:52:33.943] power_control: vib_power : ON -> OFF
- <6>[02-05 23:52:33.943] PM: suspend of devices complete after 18.646 msecs
- <6>[02-05 23:52:33.943] PM: suspend devices took 0.023 seconds
- <6>[02-05 23:52:33.951] PM: late suspend of devices complete after 1.861 msecs
- <4>[02-05 23:52:33.951] Disabling non-boot CPUs ...
- <5>[02-05 23:52:33.951] CPU1: shutdown
- <6>[02-05 23:52:33.961] Resume caused by I/O pad: CONTROL_PADCONF_WAKEUPEVENT_2[1]
- <3>[02-05 23:52:33.961] Successfully put all powerdomains to target state
- <6>[02-05 23:52:56.324] Suspended for 22.362 seconds
- <6>[02-05 23:52:56.324] wakeup wake lock: cawake
- <6>[02-05 23:52:56.324] Enabling non-boot CPUs ...
- <4>[02-05 23:52:56.332] CPU1: Booted secondary processor
- <6>[02-05 23:52:56.332] CPU1 is up
- <6>[02-05 23:52:56.339] Switched to NOHz mode on CPU #1
- <6>[02-05 23:52:56.339] PM: early resume of devices complete after 2.960 msecs
- <6>[02-05 23:52:56.339] max17043_i2c 4-0036: max17043: interrupt_handler: GAUGE_INT(21):1
- <6>[02-05 23:52:56.339] power_control: device_regulator: d7f6e880
- <6>[02-05 23:52:56.339] power_control: vib_power : ON -> ON
- <6>[02-05 23:52:56.699] PVR: PVRSRVDriverResume(pDevice=e7890a00)
- <6>[02-05 23:52:56.699] PVR: SysSystemPostPowerState: Entering state D0
- <6>[02-05 23:52:56.699] PVR: EnableSystemClocks: Enabling System Clocks
- <6>[02-05 23:52:56.699] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie e6cc6c00
- <4>[02-05 23:52:56.707] Charger_ADC_Value = 1009, PARM_ADC_Value = 1231
- <4>[02-05 23:52:56.707] apds9190_resume [0]
- <7>[02-05 23:52:56.707] lbee9qmb-rfkill lbee9qmb-rfkill.0: lbee9qmb_rfkill_set_power: enabled=0
- <7>[02-05 23:52:56.707] lbee9qmb-rfkill lbee9qmb-rfkill.0: lbee9qmb_rfkill_set_power: new setting is ignored(already set)
- <4>[02-05 23:52:56.707] status = 0
- <4>[02-05 23:52:56.707] status = 0
- <6>[02-05 23:52:56.714] ### twl6040_resume() ###
- <6>[02-05 23:52:56.714] PM: resume of devices complete after 374.908 msecs
- <6>[02-05 23:52:56.714] PM: resume devices took 0.375 seconds
- <7>[02-05 23:52:56.714] PM: Finishing wakeup.
- <4>[02-05 23:52:56.714] Restarting tasks ... done.
- <6>[02-05 23:52:56.730] suspend: exit suspend, ret = 0 (2014-02-06 02:52:56.740563455 UTC)
- <6>[02-05 23:52:59.269] PM: Syncing filesystems ... done.
- <7>[02-05 23:52:59.269] PM: Preparing system for mem sleep
- <4>[02-05 23:52:59.277] Freezing user space processes ... (elapsed 0.03 seconds) done.
- <4>[02-05 23:52:59.308] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- <7>[02-05 23:52:59.332] PM: Entering mem sleep
- <4>[02-05 23:52:59.332] suspend_set_state: VANA: No configuration
- <4>[02-05 23:52:59.332] Suspending console(s) (use no_console_suspend to debug)
- <6>[02-05 23:52:59.339] ### twl6040_suspend() ###
- <6>[02-05 23:52:59.339] max17043_i2c 4-0036: max17043: max17043_set_alert_level: 32-16=0x10, Next_Alert_Level:16(%)
- <4>[02-05 23:52:59.339] apds9190_suspend [0]
- <6>[02-05 23:52:59.347] PVR: PVRSRVDriverSuspend(pDevice=e7890a00)
- <6>[02-05 23:52:59.347] PVR: SysSystemPrePowerState: Entering state D3
- <6>[02-05 23:52:59.347] PVR: Uninstalling device LISR on IRQ 53 with cookie e6cc6c00
- <6>[02-05 23:52:59.347] PVR: DisableSystemClocks: Disabling System Clocks
- <6>[02-05 23:52:59.347] power_control: device_regulator: d7f6e100
- <6>[02-05 23:52:59.347] power_control: vib_power : ON -> OFF
- <6>[02-05 23:52:59.347] PM: suspend of devices complete after 13.883 msecs
- <6>[02-05 23:52:59.347] PM: suspend devices took 0.015 seconds
- <6>[02-05 23:52:59.347] PM: late suspend of devices complete after 1.830 msecs
- <4>[02-05 23:52:59.347] Disabling non-boot CPUs ...
- <5>[02-05 23:52:59.355] CPU1: shutdown
- <6>[02-05 23:52:59.362] Resume caused by I/O pad: CONTROL_PADCONF_WAKEUPEVENT_2[1]
- <3>[02-05 23:52:59.362] Successfully put all powerdomains to target state
- <6>[02-05 23:53:26.854] Suspended for 27.492 seconds
- <6>[02-05 23:53:26.854] wakeup wake lock: alarm
- <6>[02-05 23:53:26.854] Enabling non-boot CPUs ...
- <4>[02-05 23:53:26.862] CPU1: Booted secondary processor
- <6>[02-05 23:53:26.862] CPU1 is up
- <6>[02-05 23:53:26.862] PM: early resume of devices complete after 2.349 msecs
- <6>[02-05 23:53:26.862] max17043_i2c 4-0036: max17043: interrupt_handler: GAUGE_INT(21):1
- <6>[02-05 23:53:26.870] Switched to NOHz mode on CPU #1
- <6>[02-05 23:53:26.870] power_control: device_regulator: d7f6ebc0
- <6>[02-05 23:53:26.870] power_control: vib_power : ON -> ON
- <6>[02-05 23:53:27.206] PVR: PVRSRVDriverResume(pDevice=e7890a00)
- <6>[02-05 23:53:27.206] PVR: SysSystemPostPowerState: Entering state D0
- <6>[02-05 23:53:27.206] PVR: EnableSystemClocks: Enabling System Clocks
- <6>[02-05 23:53:27.206] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie e6cc6c00
- <4>[02-05 23:53:27.222] Charger_ADC_Value = 1015, PARM_ADC_Value = 1232
- <4>[02-05 23:53:27.222] apds9190_resume [0]
- <7>[02-05 23:53:27.222] lbee9qmb-rfkill lbee9qmb-rfkill.0: lbee9qmb_rfkill_set_power: enabled=0
- <7>[02-05 23:53:27.222] lbee9qmb-rfkill lbee9qmb-rfkill.0: lbee9qmb_rfkill_set_power: new setting is ignored(already set)
- <4>[02-05 23:53:27.222] status = 0
- <4>[02-05 23:53:27.222] status = 0
- <6>[02-05 23:53:27.222] ### twl6040_resume() ###
- <6>[02-05 23:53:27.222] PM: resume of devices complete after 357.331 msecs
- <6>[02-05 23:53:27.222] PM: resume devices took 0.351 seconds
- <7>[02-05 23:53:27.229] PM: Finishing wakeup.
- <4>[02-05 23:53:27.229] Restarting tasks ... done.
- <6>[02-05 23:53:27.245] suspend: exit suspend, ret = 0 (2014-02-06 02:53:27.254327893 UTC)
- <4>[02-05 23:53:27.245] powerbutton_irq: power button status 0
- <6>[02-05 23:53:27.261] request_suspend_state: wakeup (3->0) at 329502295225 (2014-02-06 02:53:27.269434089 UTC)
- <6>[02-05 23:53:27.261] queue late_resume_work
- <4>[02-05 23:53:27.261] [LCD] : hx8389_panel_power_on
- <3>[02-05 23:53:27.268] omapdss_dispc omapdss_dispc: omap_device_scale: Unable to find OPP for freq0
- <4>[02-05 23:53:27.276] powerbutton_irq: power button status 0
- <6>[02-05 23:53:27.565] DSSCOMP: dsscomp_late_resume
- <6>[02-05 23:53:27.565] power_control: device_regulator: d7f6e300
- <6>[02-05 23:53:27.565] power_control: touch_power : ON -> ON
- <4>[02-05 23:53:27.589] Unknown PRIVATE command SETSUSPENDMODE 0 - ignored
- <3>[02-05 23:53:27.597] in hpd work 0, state=0
- <4>[02-05 23:54:17.308] Charger_ADC_Value = 1008, PARM_ADC_Value = 1229
- <4>[02-05 23:55:07.393] Charger_ADC_Value = 997, PARM_ADC_Value = 1231
- <4>[02-05 23:55:34.464] powerbutton_irq: power button status 1
- <4>[02-05 23:55:34.620] powerbutton_irq: power button status 0
- <6>[02-05 23:55:35.378] request_suspend_state: sleep (0->3) at 457619726869 (2014-02-06 02:55:35.386865733 UTC)
- <6>[02-05 23:55:35.378] queue early_suspend_work
- <6>[02-05 23:55:35.378] power_control: device_regulator: cad1bb80
- <6>[02-05 23:55:35.378] power_control: touch_power : ON -> OFF
- <6>[02-05 23:55:35.409] DSSCOMP: dsscomp_early_suspend
- <6>[02-05 23:55:35.425] DSSCOMP: blanked screen
- <4>[02-05 23:55:35.425] [LCD] : hx8389_panel_power_off
- <3>[02-05 23:55:35.440] [HYUN]dsi_vc_config_l4, DCS_CMD_ENABLE
- <3>[02-05 23:55:35.651] omapdss_dispc omapdss_dispc: omap_device_scale: Unable to find OPP for freq0
- <4>[02-05 23:55:36.042] Unknown PRIVATE command SETSUSPENDMODE 1 - ignored
- <6>[02-05 23:55:39.683] PM: Syncing filesystems ... done.
- <7>[02-05 23:55:39.683] PM: Preparing system for mem sleep
- <4>[02-05 23:55:39.690] Freezing user space processes ... (elapsed 0.02 seconds) done.
- <4>[02-05 23:55:39.964] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
- <7>[02-05 23:55:39.987] PM: Entering mem sleep
- <4>[02-05 23:55:39.987] suspend_set_state: VANA: No configuration
- <4>[02-05 23:55:39.987] Suspending console(s) (use no_console_suspend to debug)
- <6>[02-05 23:55:39.995] ### twl6040_suspend() ###
- <6>[02-05 23:55:40.003] max17043_i2c 4-0036: max17043: max17043_set_alert_level: 32-16=0x10, Next_Alert_Level:16(%)
- <4>[02-05 23:55:40.003] apds9190_suspend [0]
- <6>[02-05 23:55:40.011] PVR: PVRSRVDriverSuspend(pDevice=e7890a00)
- <6>[02-05 23:55:40.011] PVR: SysSystemPrePowerState: Entering state D3
- <6>[02-05 23:55:40.011] PVR: Uninstalling device LISR on IRQ 53 with cookie e6cc6c00
- <6>[02-05 23:55:40.011] PVR: DisableSystemClocks: Disabling System Clocks
- <6>[02-05 23:55:40.253] power_control: device_regulator: cdd78f40
- <6>[02-05 23:55:40.261] power_control: vib_power : ON -> OFF
- <6>[02-05 23:55:40.261] PM: suspend of devices complete after 264.739 msecs
- <6>[02-05 23:55:40.261] PM: suspend devices took 0.273 seconds
- <6>[02-05 23:55:40.261] PM: late suspend of devices complete after 2.960 msecs
- <4>[02-05 23:55:40.261] Disabling non-boot CPUs ...
- <5>[02-05 23:55:40.261] CPU1: shutdown
- <6>[02-05 23:55:40.276] Resume caused by IRQ 39, TWL6030-PIH
- <3>[02-05 23:55:40.276] Successfully put all powerdomains to target state
- <6>[02-05 23:56:02.137] Suspended for 21.861 seconds
- <6>[02-05 23:56:02.137] wakeup wake lock: alarm
- <6>[02-05 23:56:02.137] Enabling non-boot CPUs ...
- <4>[02-05 23:56:02.145] CPU1: Booted secondary processor
- <6>[02-05 23:56:02.145] CPU1 is up
- <6>[02-05 23:56:02.153] Switched to NOHz mode on CPU #1
- <6>[02-05 23:56:02.153] PM: early resume of devices complete after 3.417 msecs
- <6>[02-05 23:56:02.153] max17043_i2c 4-0036: max17043: interrupt_handler: GAUGE_INT(21):1
- <6>[02-05 23:56:02.153] power_control: device_regulator: cdd78b00
- <6>[02-05 23:56:02.153] power_control: vib_power : ON -> ON
- <6>[02-05 23:56:02.497] PVR: PVRSRVDriverResume(pDevice=e7890a00)
- <6>[02-05 23:56:02.497] PVR: SysSystemPostPowerState: Entering state D0
- <6>[02-05 23:56:02.497] PVR: EnableSystemClocks: Enabling System Clocks
- <6>[02-05 23:56:02.497] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie e6cc6c00
- <4>[02-05 23:56:02.512] Charger_ADC_Value = 1013, PARM_ADC_Value = 1232
- <4>[02-05 23:56:02.512] apds9190_resume [0]
- <7>[02-05 23:56:02.512] lbee9qmb-rfkill lbee9qmb-rfkill.0: lbee9qmb_rfkill_set_power: enabled=0
- <7>[02-05 23:56:02.512] lbee9qmb-rfkill lbee9qmb-rfkill.0: lbee9qmb_rfkill_set_power: new setting is ignored(already set)
- <4>[02-05 23:56:02.512] status = 0
- <4>[02-05 23:56:02.512] status = 0
- <6>[02-05 23:56:02.512] ### twl6040_resume() ###
- <6>[02-05 23:56:02.512] PM: resume of devices complete after 363.250 msecs
- <6>[02-05 23:56:02.520] PM: resume devices took 0.367 seconds
- <7>[02-05 23:56:02.520] PM: Finishing wakeup.
- <4>[02-05 23:56:02.520] Restarting tasks ... done.
- <6>[02-05 23:56:02.536] suspend: exit suspend, ret = 0 (2014-02-06 02:56:02.545770757 UTC)
- <4>[02-05 23:56:02.536] powerbutton_irq: power button status 0
- <6>[02-05 23:56:02.544] request_suspend_state: wakeup (3->0) at 462928045960 (2014-02-06 02:56:02.556573979 UTC)
- <6>[02-05 23:56:02.544] queue late_resume_work
- <4>[02-05 23:56:02.544] [LCD] : hx8389_panel_power_on
- <3>[02-05 23:56:02.559] omapdss_dispc omapdss_dispc: omap_device_scale: Unable to find OPP for freq0
- <4>[02-05 23:56:02.567] powerbutton_irq: power button status 0
- <6>[02-05 23:56:02.856] DSSCOMP: dsscomp_late_resume
- <6>[02-05 23:56:02.856] power_control: device_regulator: cdd78e80
- <6>[02-05 23:56:02.856] power_control: touch_power : ON -> ON
- <3>[02-05 23:56:02.887] in hpd work 0, state=0
- <4>[02-05 23:56:02.966] Unknown PRIVATE command SETSUSPENDMODE 0 - ignored
- <4>[02-05 23:56:52.630] Charger_ADC_Value = 1002, PARM_ADC_Value = 1231
- <4>[02-05 23:57:42.755] Charger_ADC_Value = 1008, PARM_ADC_Value = 1230
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement