Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Linux version 3.10.6-xes_r5-dirty (vagrant@xes-dev-coreboot) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1)5
- Command line: ro console=tty0 console=ttyS0,115200n8 root=/dev/ram0 BOOT_IMAGE=KERNEL debug ignore_logleg
- KERNEL supported cpus:
- Intel GenuineIntel
- e820: BIOS-provided physical RAM map:
- BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
- BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
- BIOS-e820: [mem 0x0000000000100000-0x000000007efe1fff] usable
- BIOS-e820: [mem 0x000000007efe2000-0x000000007effffff] type 16
- BIOS-e820: [mem 0x000000007f000000-0x000000008fffffff] reserved
- BIOS-e820: [mem 0x00000000fbffc000-0x00000000fbffefff] reserved
- BIOS-e820: [mem 0x00000000fe000000-0x00000000ffffffff] reserved
- BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
- debug: ignoring loglevel setting.
- NX (Execute Disable) protection: active
- SMBIOS 2.7 present.
- DMI: XES XPedite7670/XPedite7670, BIOS 6 05/29/2015
- e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- e820: remove [mem 0x000a0000-0x000fffff] usable
- e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000
- MTRR default type: uncachable
- MTRR fixed ranges enabled:
- 00000-9FFFF write-back
- A0000-FFFFF uncachable
- MTRR variable ranges enabled:
- 0 base 0000FF000000 mask 3FFFFF000000 write-protect
- 1 base 000000000000 mask 3FFF80000000 write-back
- 2 base 00007F800000 mask 3FFFFF800000 uncachable
- 3 base 000100000000 mask 3FFF00000000 write-back
- 4 base 000200000000 mask 3FFE00000000 write-back
- 5 disabled
- 6 disabled
- 7 disabled
- 8 disabled
- 9 disabled
- x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- e820: last_pfn = 0x7efe2 max_arch_pfn = 0x400000000
- Base memory trampoline at [ffff880000098000] 98000 size 24576
- Using GB pages for direct mapping
- init_memory_mapping: [mem 0x00000000-0x000fffff]
- [mem 0x00000000-0x000fffff] page 4k
- BRK [0x019d1000, 0x019d1fff] PGTABLE
- BRK [0x019d2000, 0x019d2fff] PGTABLE
- BRK [0x019d3000, 0x019d3fff] PGTABLE
- init_memory_mapping: [mem 0x27fe00000-0x27fffffff]
- [mem 0x27fe00000-0x27fffffff] page 1G
- init_memory_mapping: [mem 0x27c000000-0x27fdfffff]
- [mem 0x27c000000-0x27fdfffff] page 1G
- init_memory_mapping: [mem 0x200000000-0x27bffffff]
- [mem 0x200000000-0x27bffffff] page 1G
- init_memory_mapping: [mem 0x00100000-0x7efe1fff]
- [mem 0x00100000-0x001fffff] page 4k
- [mem 0x00200000-0x7edfffff] page 2M
- [mem 0x7ee00000-0x7efe1fff] page 4k
- init_memory_mapping: [mem 0x100000000-0x1ffffffff]
- [mem 0x100000000-0x1ffffffff] page 1G
- RAMDISK: [mem 0x02000000-0x022c5fff]
- ACPI: RSDP 00000000000f4e40 00024 (v02 CORE )
- ACPI: XSDT 000000007efec0e0 00054 (v01 CORE COREBOOT 00000000 CORE 00000000)
- ACPI: FACP 000000007efeef7b 000F4 (v04 CORE COREBOOT 00000000 CORE 00000001)
- ACPI: DSDT 000000007efec250 02D2B (v02 COREv4 COREBOOT 20150521 INTL 20150204)
- ACPI: FACS 000000007efec210 00040
- ACPI: SPCR 000000007efef070 00050 (v01 CORE COREBOOT 00000000 CORE 00000000)
- ACPI: HPET 000000007efef0c0 00038 (v01 CORE COREBOOT 00000000 CORE 00000000)
- ACPI: APIC 000000007efef100 000CC (v01 CORE COREBOOT 00000000 CORE 00000000)
- ACPI: MCFG 000000007efef1d0 0003C (v01 CORE COREBOOT 00000000 CORE 00000000)
- ACPI: SSDT 000000007efef310 00024 (v02 CORE COREBOOT 0000002A CORE 0000002A)
- ACPI: Local APIC address 0xfee00000
- [ffffea0000000000-ffffea0009ffffff] PMD -> [ffff880277600000-ffff88027f5fffff] on node 0
- Zone ranges:
- DMA [mem 0x00001000-0x00ffffff]
- DMA32 [mem 0x01000000-0xffffffff]
- Normal [mem 0x100000000-0x27fffffff]
- Movable zone start for each node
- Early memory node ranges
- node 0: [mem 0x00001000-0x0009ffff]
- node 0: [mem 0x00100000-0x7efe1fff]
- node 0: [mem 0x100000000-0x27fffffff]
- On node 0 totalpages: 2092929
- DMA zone: 64 pages used for memmap
- DMA zone: 23 pages reserved
- DMA zone: 3999 pages, LIFO batch:0
- DMA32 zone: 8064 pages used for memmap
- DMA32 zone: 516066 pages, LIFO batch:31
- Normal zone: 24576 pages used for memmap
- Normal zone: 1572864 pages, LIFO batch:31
- ACPI: PM-Timer IO Port: 0x408
- ACPI: Local APIC address 0xfee00000
- ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- ACPI: LAPIC (acpi_id[0x01] lapic_id[0x08] enabled)
- ACPI: LAPIC (acpi_id[0x02] lapic_id[0x0b] enabled)
- ACPI: LAPIC (acpi_id[0x03] lapic_id[0x0a] enabled)
- ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
- ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
- ACPI: LAPIC (acpi_id[0x06] lapic_id[0x09] enabled)
- ACPI: LAPIC (acpi_id[0x07] lapic_id[0x04] enabled)
- ACPI: LAPIC (acpi_id[0x08] lapic_id[0x06] enabled)
- ACPI: LAPIC (acpi_id[0x09] lapic_id[0x0d] enabled)
- ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x07] enabled)
- ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0c] enabled)
- ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0e] enabled)
- ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x03] enabled)
- ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x02] enabled)
- ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] enabled)
- ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
- IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
- ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- ACPI: IRQ0 used by override.
- ACPI: IRQ2 used by override.
- ACPI: IRQ9 used by override.
- Using ACPI (MADT) for SMP configuration information
- ACPI: HPET id: 0x8086a701 base: 0xfed00000
- smpboot: Allowing 16 CPUs, 0 hotplug CPUs
- nr_irqs_gsi: 40
- e820: [mem 0x90000000-0xfbffbfff] available for PCI devices
- setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:16 nr_node_ids:1
- PERCPU: Embedded 26 pages/cpu @ffff88027fc00000 s74304 r8192 d24000 u131072
- pcpu-alloc: s74304 r8192 d24000 u131072 alloc=1*2097152
- pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2060202
- Kernel command line: ro console=tty0 console=ttyS0,115200n8 root=/dev/ram0 BOOT_IMAGE=KERNEL debug ignorg
- PID hash table entries: 4096 (order: 3, 32768 bytes)
- Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
- xsave: enabled xstate_bv 0x7, cntxt size 0x340
- Memory: 8147480k/10485760k available (4817k kernel code, 2114044k absent, 224236k reserved, 3814k data, )
- SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
- Hierarchical RCU implementation.
- RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=16.
- NR_IRQS:4352 nr_irqs:808 16
- Console: colour VGA+ 80x25
- console [tty0] enabled
- console [ttyS0] enabled
- hpet clockevent registered
- tsc: Fast TSC calibration using PIT
- tsc: Detected 1800.188 MHz processor
- Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.37 BogoMIPS (lpj=1800188)
- pid_max: default: 32768 minimum: 301
- Mount-cache hash table entries: 256
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 0
- mce: CPU supports 22 MCE banks
- CPU0: Thermal monitoring enabled (TM1)
- Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
- Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
- tlb_flushall_shift: 6
- Freeing SMP alternatives: 12k freed
- ACPI: Core revision 20130328
- ACPI: All ACPI Tables successfully acquired
- Switched APIC routing to physical flat.
- ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- smpboot: CPU0: Intel 06/56 (fam: 06, model: 56, stepping: 01)
- TSC deadline timer enabled
- calling set_real_mode_permissions+0x0/0x9a @ 1
- initcall set_real_mode_permissions+0x0/0x9a returned 0 after 0 usecs
- calling init_hw_perf_events+0x0/0x4de @ 1
- Performance Events: no PEBS fmt2+, generic architected perfmon, Intel PMU driver.
- ... version: 3
- ... bit width: 48
- ... generic registers: 4
- ... value mask: 0000ffffffffffff
- ... max period: 000000007fffffff
- ... fixed-purpose events: 3
- ... event mask: 000000070000000f
- initcall init_hw_perf_events+0x0/0x4de returned 0 after 10742 usecs
- calling register_trigger_all_cpu_backtrace+0x0/0x16 @ 1
- initcall register_trigger_all_cpu_backtrace+0x0/0x16 returned 0 after 0 usecs
- calling spawn_ksoftirqd+0x0/0x26 @ 1
- initcall spawn_ksoftirqd+0x0/0x26 returned 0 after 0 usecs
- calling init_workqueues+0x0/0x2fd @ 1
- initcall init_workqueues+0x0/0x2fd returned 0 after 0 usecs
- calling check_cpu_stall_init+0x0/0x1b @ 1
- initcall check_cpu_stall_init+0x0/0x1b returned 0 after 0 usecs
- calling migration_init+0x0/0x6a @ 1
- initcall migration_init+0x0/0x6a returned 0 after 0 usecs
- calling cpu_stop_init+0x0/0x6d @ 1
- initcall cpu_stop_init+0x0/0x6d returned 0 after 0 usecs
- calling rcu_scheduler_really_started+0x0/0x12 @ 1
- initcall rcu_scheduler_really_started+0x0/0x12 returned 0 after 0 usecs
- calling rcu_spawn_gp_kthread+0x0/0x85 @ 1
- initcall rcu_spawn_gp_kthread+0x0/0x85 returned 0 after 0 usecs
- calling relay_init+0x0/0x8 @ 1
- initcall relay_init+0x0/0x8 returned 0 after 0 usecs
- smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 OK
- Brought up 16 CPUs
- smpboot: Total of 16 processors activated (57606.01 BogoMIPS)
- devtmpfs: initialized
- calling ipc_ns_init+0x0/0x14 @ 1
- initcall ipc_ns_init+0x0/0x14 returned 0 after 0 usecs
- calling init_mmap_min_addr+0x0/0x16 @ 1
- initcall init_mmap_min_addr+0x0/0x16 returned 0 after 0 usecs
- calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1
- initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 usecs
- calling net_ns_init+0x0/0x16f @ 1
- initcall net_ns_init+0x0/0x16f returned 0 after 0 usecs
- calling e820_mark_nvs_memory+0x0/0x3b @ 1
- initcall e820_mark_nvs_memory+0x0/0x3b returned 0 after 0 usecs
- calling cpufreq_tsc+0x0/0x33 @ 1
- initcall cpufreq_tsc+0x0/0x33 returned 0 after 0 usecs
- calling reboot_init+0x0/0x20 @ 1
- initcall reboot_init+0x0/0x20 returned 0 after 0 usecs
- calling wq_sysfs_init+0x0/0x14 @ 1
- initcall wq_sysfs_init+0x0/0x14 returned 0 after 0 usecs
- calling ksysfs_init+0x0/0x93 @ 1
- initcall ksysfs_init+0x0/0x93 returned 0 after 0 usecs
- calling init_jiffies_clocksource+0x0/0x12 @ 1
- initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs
- calling init_zero_pfn+0x0/0x39 @ 1
- initcall init_zero_pfn+0x0/0x39 returned 0 after 0 usecs
- calling fsnotify_init+0x0/0x26 @ 1
- initcall fsnotify_init+0x0/0x26 returned 0 after 0 usecs
- calling filelock_init+0x0/0x2a @ 1
- initcall filelock_init+0x0/0x2a returned 0 after 0 usecs
- calling init_misc_binfmt+0x0/0x2e @ 1
- initcall init_misc_binfmt+0x0/0x2e returned 0 after 0 usecs
- calling init_script_binfmt+0x0/0x16 @ 1
- initcall init_script_binfmt+0x0/0x16 returned 0 after 0 usecs
- calling init_elf_binfmt+0x0/0x16 @ 1
- initcall init_elf_binfmt+0x0/0x16 returned 0 after 0 usecs
- calling init_compat_elf_binfmt+0x0/0x16 @ 1
- initcall init_compat_elf_binfmt+0x0/0x16 returned 0 after 0 usecs
- calling prandom_init+0x0/0xc5 @ 1
- initcall prandom_init+0x0/0xc5 returned 0 after 0 usecs
- calling cpufreq_core_init+0x0/0xbd @ 1
- initcall cpufreq_core_init+0x0/0xbd returned 0 after 0 usecs
- calling cpuidle_init+0x0/0x3d @ 1
- initcall cpuidle_init+0x0/0x3d returned 0 after 0 usecs
- calling sock_init+0x0/0x7d @ 1
- initcall sock_init+0x0/0x7d returned 0 after 0 usecs
- calling netlink_proto_init+0x0/0x1a4 @ 1
- NET: Registered protocol family 16
- initcall netlink_proto_init+0x0/0x1a4 returned 0 after 976 usecs
- calling bdi_class_init+0x0/0x34 @ 1
- initcall bdi_class_init+0x0/0x34 returned 0 after 0 usecs
- calling kobject_uevent_init+0x0/0x12 @ 1
- initcall kobject_uevent_init+0x0/0x12 returned 0 after 0 usecs
- calling gpiolib_sysfs_init+0x0/0x9a @ 1
- initcall gpiolib_sysfs_init+0x0/0x9a returned 0 after 0 usecs
- calling pcibus_class_init+0x0/0x19 @ 1
- initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs
- calling pci_driver_init+0x0/0x12 @ 1
- initcall pci_driver_init+0x0/0x12 returned 0 after 0 usecs
- calling backlight_class_init+0x0/0x5d @ 1
- initcall backlight_class_init+0x0/0x5d returned 0 after 0 usecs
- calling video_output_class_init+0x0/0x19 @ 1
- initcall video_output_class_init+0x0/0x19 returned 0 after 0 usecs
- calling tty_class_init+0x0/0x34 @ 1
- initcall tty_class_init+0x0/0x34 returned 0 after 0 usecs
- calling vtconsole_class_init+0x0/0xbd @ 1
- initcall vtconsole_class_init+0x0/0xbd returned 0 after 0 usecs
- calling i2c_init+0x0/0x71 @ 1
- initcall i2c_init+0x0/0x71 returned 0 after 0 usecs
- calling arch_kdebugfs_init+0x0/0x13 @ 1
- initcall arch_kdebugfs_init+0x0/0x13 returned 0 after 0 usecs
- calling mtrr_if_init+0x0/0x65 @ 1
- initcall mtrr_if_init+0x0/0x65 returned 0 after 0 usecs
- calling ffh_cstate_init+0x0/0x2b @ 1
- initcall ffh_cstate_init+0x0/0x2b returned 0 after 0 usecs
- calling acpi_pci_init+0x0/0x57 @ 1
- ACPI: bus type PCI registered
- initcall acpi_pci_init+0x0/0x57 returned 0 after 976 usecs
- calling dmi_id_init+0x0/0x306 @ 1
- initcall dmi_id_init+0x0/0x306 returned 0 after 0 usecs
- calling pci_arch_init+0x0/0x68 @ 1
- PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
- PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
- PCI: Using configuration type 1 for base access
- initcall pci_arch_init+0x0/0x68 returned 0 after 17578 usecs
- calling topology_init+0x0/0x52 @ 1
- initcall topology_init+0x0/0x52 returned 0 after 976 usecs
- calling mtrr_init_finialize+0x0/0x36 @ 1
- initcall mtrr_init_finialize+0x0/0x36 returned 0 after 0 usecs
- calling init_vdso+0x0/0x288 @ 1
- initcall init_vdso+0x0/0x288 returned 0 after 0 usecs
- calling sysenter_setup+0x0/0x2c3 @ 1
- initcall sysenter_setup+0x0/0x2c3 returned 0 after 0 usecs
- calling param_sysfs_init+0x0/0x180 @ 1
- initcall param_sysfs_init+0x0/0x180 returned 0 after 11718 usecs
- calling pm_sysrq_init+0x0/0x19 @ 1
- initcall pm_sysrq_init+0x0/0x19 returned 0 after 0 usecs
- calling default_bdi_init+0x0/0x64 @ 1
- initcall default_bdi_init+0x0/0x64 returned 0 after 0 usecs
- calling init_bio+0x0/0xd8 @ 1
- bio: create slab <bio-0> at 0
- initcall init_bio+0x0/0xd8 returned 0 after 976 usecs
- calling fsnotify_notification_init+0x0/0x88 @ 1
- initcall fsnotify_notification_init+0x0/0x88 returned 0 after 0 usecs
- calling cryptomgr_init+0x0/0x12 @ 1
- initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs
- calling blk_settings_init+0x0/0x2a @ 1
- initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs
- calling blk_ioc_init+0x0/0x2a @ 1
- initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs
- calling blk_softirq_init+0x0/0x5e @ 1
- initcall blk_softirq_init+0x0/0x5e returned 0 after 0 usecs
- calling blk_iopoll_setup+0x0/0x5e @ 1
- initcall blk_iopoll_setup+0x0/0x5e returned 0 after 0 usecs
- calling genhd_device_init+0x0/0x76 @ 1
- initcall genhd_device_init+0x0/0x76 returned 0 after 0 usecs
- calling pca953x_init+0x0/0x14 @ 1
- initcall pca953x_init+0x0/0x14 returned 0 after 0 usecs
- calling pcf857x_init+0x0/0x14 @ 1
- initcall pcf857x_init+0x0/0x14 returned 0 after 0 usecs
- calling pci_slot_init+0x0/0x45 @ 1
- initcall pci_slot_init+0x0/0x45 returned 0 after 0 usecs
- calling fbmem_init+0x0/0x98 @ 1
- initcall fbmem_init+0x0/0x98 returned 0 after 0 usecs
- calling acpi_init+0x0/0x28c @ 1
- ACPI: Added _OSI(Module Device)
- ACPI: Added _OSI(Processor Device)
- ACPI: Added _OSI(3.0 _SCP Extensions)
- ACPI: Added _OSI(Processor Aggregator Device)
- ACPI: EC: Look up EC in DSDT
- ACPI: Interpreter enabled
- ACPI: (supports S0 S5)
- ACPI: Using IOAPIC for interrupt routing
- PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
- acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem )
- PCI host bridge to bus 0000:00
- pci_bus 0000:00: root bus resource [bus 00-fe]
- pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
- pci_bus 0000:00: root bus resource [io 0x0d00-0xf7ff]
- pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
- pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
- pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
- pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
- pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
- pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
- pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
- pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
- pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
- pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
- pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
- pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
- pci_bus 0000:00: root bus resource [mem 0x7f000000-0xfdffffff]
- pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000
- pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400
- pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400
- pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400
- pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
- pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400
- pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000
- pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000
- pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000
- pci 0000:00:05.4: [8086:6f2c] type 00 class 0x080020
- pci 0000:00:05.4: reg 10: [mem 0xf2a04000-0xf2a04fff]
- pci 0000:00:05.6: [8086:6f39] type 00 class 0x110100
- pci 0000:00:06.0: [8086:6f10] type 00 class 0x088000
- pci 0000:00:06.1: [8086:6f11] type 00 class 0x088000
- pci 0000:00:06.2: [8086:6f12] type 00 class 0x088000
- pci 0000:00:06.3: [8086:6f13] type 00 class 0x088000
- pci 0000:00:06.4: [8086:6f14] type 00 class 0x088000
- pci 0000:00:06.5: [8086:6f15] type 00 class 0x088000
- pci 0000:00:06.6: [8086:6f16] type 00 class 0x088000
- pci 0000:00:06.7: [8086:6f17] type 00 class 0x088000
- pci 0000:00:07.0: [8086:6f18] type 00 class 0x088000
- pci 0000:00:07.1: [8086:6f19] type 00 class 0x088000
- pci 0000:00:07.2: [8086:6f1a] type 00 class 0x088000
- pci 0000:00:07.3: [8086:6f1b] type 00 class 0x088000
- pci 0000:00:07.4: [8086:6f1c] type 00 class 0x088000
- pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
- pci 0000:00:16.0: reg 10: [mem 0xf2a06d00-0xf2a06d0f 64bit]
- pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
- pci 0000:00:1b.0: reg 10: [mem 0xf2a00000-0xf2a03fff 64bit]
- pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
- pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
- pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
- pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
- pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400
- pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
- pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
- pci 0000:00:1d.0: reg 10: [mem 0xf2a06800-0xf2a06bff]
- pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1f.0: [8086:8c42] type 00 class 0x060100
- pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
- pci 0000:00:1f.2: reg 10: [io 0x5040-0x5047]
- pci 0000:00:1f.2: reg 14: [io 0x5050-0x5053]
- pci 0000:00:1f.2: reg 18: [io 0x5048-0x504f]
- pci 0000:00:1f.2: reg 1c: [io 0x5054-0x5057]
- pci 0000:00:1f.2: reg 20: [io 0x5000-0x501f]
- pci 0000:00:1f.2: reg 24: [mem 0xf2a06000-0xf2a067ff]
- pci 0000:00:1f.2: PME# supported from D3hot
- pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
- pci 0000:00:1f.3: reg 10: [mem 0xf2a06c00-0xf2a06cff 64bit]
- pci 0000:00:1f.3: reg 20: [io 0x5020-0x503f]
- pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000
- pci 0000:00:1f.6: reg 10: [mem 0xf2a05000-0xf2a05fff 64bit]
- pci 0000:01:00.0: [10de:01d3] type 00 class 0x030000
- pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf0ffffff]
- pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
- pci 0000:01:00.0: reg 1c: [mem 0xf1000000-0xf1ffffff 64bit]
- pci 0000:01:00.0: reg 30: [mem 0xf2000000-0xf201ffff pref]
- pci 0000:00:01.0: PCI bridge to [bus 01]
- pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf20fffff]
- pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
- pci 0000:02:00.0: [8086:0c50] type 00 class 0x088000
- pci 0000:02:00.0: reg 10: [mem 0xf2300000-0xf2301fff 64bit]
- pci 0000:02:00.1: [8086:0c51] type 00 class 0x088000
- pci 0000:02:00.1: reg 10: [mem 0xf2302000-0xf2303fff 64bit]
- pci 0000:02:00.2: [8086:0c52] type 00 class 0x088000
- pci 0000:02:00.2: reg 10: [mem 0xf2304000-0xf2305fff 64bit]
- pci 0000:02:00.3: [8086:0c53] type 00 class 0x088000
- pci 0000:02:00.3: reg 10: [mem 0xf2306000-0xf2307fff 64bit]
- pci 0000:00:02.0: PCI bridge to [bus 02]
- pci 0000:00:02.0: bridge window [mem 0xf2300000-0xf23fffff]
- pci 0000:03:00.0: [8086:10a6] type 00 class 0xff0000
- pci 0000:03:00.0: reg 10: [mem 0xf2400000-0xf2400fff 64bit pref]
- pci 0000:00:02.2: PCI bridge to [bus 03]
- pci 0000:00:02.2: bridge window [mem 0xf2400000-0xf24fffff 64bit pref]
- pci 0000:04:00.0: [10b5:8609] type 01 class 0x060400
- pci 0000:04:00.0: reg 10: [mem 0xf2200000-0xf221ffff]
- pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
- pci 0000:04:00.1: [10b5:8609] type 00 class 0x088000
- pci 0000:04:00.1: reg 10: [mem 0xf2220000-0xf223ffff]
- pci 0000:00:03.0: PCI bridge to [bus 04-05]
- pci 0000:00:03.0: bridge window [mem 0xf2100000-0xf22fffff]
- pci 0000:05:01.0: [10b5:8609] type 00 class 0x068000
- pci 0000:05:01.0: reg 10: [mem 0xf2100000-0xf211ffff]
- pci 0000:04:00.0: PCI bridge to [bus 05]
- pci 0000:04:00.0: bridge window [mem 0xf2100000-0xf21fffff]
- pci 0000:06:00.0: [8086:157c] type 00 class 0x020000
- pci 0000:06:00.0: reg 10: [mem 0xf2500000-0xf251ffff]
- pci 0000:06:00.0: reg 18: [io 0x1000-0x101f]
- pci 0000:06:00.0: reg 1c: [mem 0xf2520000-0xf2523fff]
- pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.0: PCI bridge to [bus 06]
- pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
- pci 0000:00:1c.0: bridge window [mem 0xf2500000-0xf25fffff]
- pci 0000:07:00.0: [8086:157c] type 00 class 0x020000
- pci 0000:07:00.0: reg 10: [mem 0xf2600000-0xf261ffff]
- pci 0000:07:00.0: reg 18: [io 0x2000-0x201f]
- pci 0000:07:00.0: reg 1c: [mem 0xf2620000-0xf2623fff]
- pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.1: PCI bridge to [bus 07]
- pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
- pci 0000:00:1c.1: bridge window [mem 0xf2600000-0xf26fffff]
- pci 0000:08:00.0: [8086:157b] type 00 class 0x020000
- pci 0000:08:00.0: reg 10: [mem 0xf2700000-0xf271ffff]
- pci 0000:08:00.0: reg 18: [io 0x3000-0x301f]
- pci 0000:08:00.0: reg 1c: [mem 0xf2720000-0xf2723fff]
- pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.2: PCI bridge to [bus 08]
- pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
- pci 0000:00:1c.2: bridge window [mem 0xf2700000-0xf27fffff]
- pci 0000:09:00.0: [8086:157b] type 00 class 0x020000
- pci 0000:09:00.0: reg 10: [mem 0xf2800000-0xf281ffff]
- pci 0000:09:00.0: reg 18: [io 0x4000-0x401f]
- pci 0000:09:00.0: reg 1c: [mem 0xf2820000-0xf2823fff]
- pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.3: PCI bridge to [bus 09]
- pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
- pci 0000:00:1c.3: bridge window [mem 0xf2800000-0xf28fffff]
- pci 0000:0a:00.0: [10b5:8112] type 01 class 0x060400
- pci 0000:0a:00.0: reg 10: [mem 0xf2900000-0xf290ffff 64bit pref]
- pci 0000:0a:00.0: supports D1
- pci 0000:0a:00.0: PME# supported from D0 D1 D3hot
- pci 0000:00:1c.7: PCI bridge to [bus 0a-0b]
- pci 0000:00:1c.7: bridge window [mem 0xf2900000-0xf29fffff 64bit pref]
- pci 0000:0a:00.0: PCI bridge to [bus 0b]
- pci_bus 0000:00: on NUMA node 0
- acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x19)
- ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *6 7 10 12 14 15)
- ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 11 12 14 15) *10
- ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
- ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 11 *12 14 15)
- ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 *14 15)
- ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 11 12 14 *15)
- ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 12 14 15)
- ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
- ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus ff])
- PCI host bridge to bus 0000:ff
- pci_bus 0000:ff: root bus resource [bus ff]
- pci_bus 0000:ff: root bus resource [io 0xf800-0xffff]
- pci_bus 0000:ff: root bus resource [mem 0xfe000000-0xfebfffff]
- pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000
- pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100
- pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100
- pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000
- pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000
- pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000
- pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000
- pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000
- pci 0000:ff:0c.4: [8086:6fe4] type 00 class 0x088000
- pci 0000:ff:0c.5: [8086:6fe5] type 00 class 0x088000
- pci 0000:ff:0c.6: [8086:6fe6] type 00 class 0x088000
- pci 0000:ff:0c.7: [8086:6fe7] type 00 class 0x088000
- pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000
- pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000
- pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000
- pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000
- pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000
- pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100
- pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000
- pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100
- pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000
- pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000
- pci 0000:ff:12.0: reg 14: [mem 0x00000000-0x0000000f]
- pci 0000:ff:12.0: reg 18: [mem 0x00000000-0x0000003f]
- pci 0000:ff:12.0: reg 1c: [mem 0x00000000-0x0000000f]
- pci 0000:ff:12.0: reg 20: [mem 0x00000000-0x0000003f]
- pci 0000:ff:12.0: reg 24: [mem 0x00000000-0x0000000f]
- pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100
- pci 0000:ff:12.2: [8086:6f70] type 00 class 0x088000
- pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000
- pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000
- pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000
- pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000
- pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000
- pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000
- pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000
- pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000
- pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000
- pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000
- pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000
- pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000
- pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000
- pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000
- pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000
- pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000
- pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000
- pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000
- pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000
- pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000
- pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000
- pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000
- pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000
- pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000
- pci 0000:ff:1e.3: reg 10: [mem 0x00000010-0x0000001f]
- pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000
- pci 0000:ff:1e.7: [8086:6f9f] type 00 class 0x088000
- pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000
- pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000
- pci_bus 0000:ff: on NUMA node 0
- acpi PNP0A08:01: ACPI _OSC support notification failed, disabling PCIe ASPM
- acpi PNP0A08:01: Unable to request _OSC control (_OSC support mask: 0x08)
- acpi root: \_SB_.PCI0 notify handler is installed
- acpi root: \_SB_.PCI1 notify handler is installed
- Found 2 acpi root devices
- initcall acpi_init+0x0/0x28c returned 0 after 268554 usecs
- calling pnp_init+0x0/0x12 @ 1
- initcall pnp_init+0x0/0x12 returned 0 after 0 usecs
- calling misc_init+0x0/0xb0 @ 1
- initcall misc_init+0x0/0xb0 returned 0 after 0 usecs
- calling vga_arb_device_init+0x0/0xe3 @ 1
- vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- vgaarb: loaded
- vgaarb: bridge control possible 0000:01:00.0
- initcall vga_arb_device_init+0x0/0xe3 returned 0 after 2929 usecs
- calling dma_buf_init+0x0/0x37 @ 1
- initcall dma_buf_init+0x0/0x37 returned 0 after 0 usecs
- calling init_scsi+0x0/0x80 @ 1
- SCSI subsystem initialized
- initcall init_scsi+0x0/0x80 returned 0 after 976 usecs
- calling ata_init+0x0/0x327 @ 1
- ACPI: bus type ATA registered
- libata version 3.00 loaded.
- initcall ata_init+0x0/0x327 returned 0 after 1953 usecs
- calling usb_init+0x0/0x10e @ 1
- ACPI: bus type USB registered
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- initcall usb_init+0x0/0x10e returned 0 after 3906 usecs
- calling input_init+0x0/0x108 @ 1
- initcall input_init+0x0/0x108 returned 0 after 0 usecs
- calling rtc_init+0x0/0x63 @ 1
- initcall rtc_init+0x0/0x63 returned 0 after 0 usecs
- calling pps_init+0x0/0xb2 @ 1
- pps_core: LinuxPPS API ver. 1 registered
- pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- initcall pps_init+0x0/0xb2 returned 0 after 1953 usecs
- calling ptp_init+0x0/0x9f @ 1
- PTP clock support registered
- initcall ptp_init+0x0/0x9f returned 0 after 976 usecs
- calling hwmon_init+0x0/0xf0 @ 1
- initcall hwmon_init+0x0/0xf0 returned 0 after 0 usecs
- calling watchdog_init+0x0/0x5d @ 1
- initcall watchdog_init+0x0/0x5d returned 0 after 0 usecs
- calling edac_init+0x0/0x62 @ 1
- EDAC MC: Ver: 3.0.0
- initcall edac_init+0x0/0x62 returned 0 after 976 usecs
- calling efisubsys_init+0x0/0x129 @ 1
- initcall efisubsys_init+0x0/0x129 returned 0 after 0 usecs
- calling init_soundcore+0x0/0x95 @ 1
- initcall init_soundcore+0x0/0x95 returned 0 after 0 usecs
- calling alsa_sound_init+0x0/0x99 @ 1
- Advanced Linux Sound Architecture Driver Initialized.
- initcall alsa_sound_init+0x0/0x99 returned 0 after 976 usecs
- calling pci_subsys_init+0x0/0x48 @ 1
- PCI: Using ACPI for IRQ routing
- PCI: pci_cache_line_size set to 64 bytes
- pci 0000:ff:1e.3: no compatible bridge window for [mem 0x00000010-0x0000001f]
- e820: reserve RAM buffer [mem 0x7efe2000-0x7fffffff]
- initcall pci_subsys_init+0x0/0x48 returned 0 after 12695 usecs
- calling proto_init+0x0/0x12 @ 1
- initcall proto_init+0x0/0x12 returned 0 after 0 usecs
- calling net_dev_init+0x0/0x1b3 @ 1
- initcall net_dev_init+0x0/0x1b3 returned 0 after 0 usecs
- calling neigh_init+0x0/0x80 @ 1
- initcall neigh_init+0x0/0x80 returned 0 after 0 usecs
- calling fib_rules_init+0x0/0xa8 @ 1
- initcall fib_rules_init+0x0/0xa8 returned 0 after 0 usecs
- calling genl_init+0x0/0x75 @ 1
- initcall genl_init+0x0/0x75 returned 0 after 0 usecs
- calling hpet_late_init+0x0/0xcd @ 1
- hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
- hpet0: 8 comparators, 64-bit 14.318180 MHz counter
- initcall hpet_late_init+0x0/0xcd returned 0 after 5859 usecs
- calling clocksource_done_booting+0x0/0x5a @ 1
- Switching to clocksource hpet
- initcall clocksource_done_booting+0x0/0x5a returned 0 after 992 usecs
- calling init_pipe_fs+0x0/0x47 @ 1
- initcall init_pipe_fs+0x0/0x47 returned 0 after 28 usecs
- calling eventpoll_init+0x0/0xd7 @ 1
- initcall eventpoll_init+0x0/0xd7 returned 0 after 3 usecs
- calling anon_inode_init+0x0/0x57 @ 1
- initcall anon_inode_init+0x0/0x57 returned 0 after 23 usecs
- calling blk_scsi_ioctl_init+0x0/0x287 @ 1
- initcall blk_scsi_ioctl_init+0x0/0x287 returned 0 after 1 usecs
- calling acpi_event_init+0x0/0x55 @ 1
- initcall acpi_event_init+0x0/0x55 returned 0 after 7 usecs
- calling pnp_system_init+0x0/0x12 @ 1
- initcall pnp_system_init+0x0/0x12 returned 0 after 61 usecs
- calling pnpacpi_init+0x0/0x8c @ 1
- pnp: PnP ACPI init
- ACPI: bus type PNP registered
- system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
- system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
- system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
- system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
- system 00:00: [mem 0x80000000-0x8fffffff] has been reserved
- system 00:00: [mem 0xfed80000-0xfed83fff] has been reserved
- system 00:00: [mem 0xfed84000-0xfed84fff] has been reserved
- system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:01: [dma 4]
- pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
- pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
- system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
- system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
- pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
- system 00:05: [io 0x0400-0x04fe] has been reserved
- system 00:05: [io 0x0500-0x057f] has been reserved
- system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
- pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
- pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
- pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
- pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
- pnp: PnP ACPI: found 11 devices
- ACPI: bus type PNP unregistered
- initcall pnpacpi_init+0x0/0x8c returned 0 after 128603 usecs
- calling chr_dev_init+0x0/0xc1 @ 1
- initcall chr_dev_init+0x0/0xc1 returned 0 after 6366 usecs
- calling firmware_class_init+0x0/0x41 @ 1
- initcall firmware_class_init+0x0/0x41 returned 0 after 59 usecs
- calling thermal_init+0x0/0x92 @ 1
- initcall thermal_init+0x0/0x92 returned 0 after 69 usecs
- calling cpufreq_gov_performance_init+0x0/0x12 @ 1
- initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 0 usecs
- calling cpufreq_gov_userspace_init+0x0/0x12 @ 1
- initcall cpufreq_gov_userspace_init+0x0/0x12 returned 0 after 0 usecs
- calling init_acpi_pm_clocksource+0x0/0xd7 @ 1
- initcall init_acpi_pm_clocksource+0x0/0xd7 returned 0 after 4415 usecs
- calling pcibios_assign_resources+0x0/0xba @ 1
- pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000
- pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000
- pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000
- pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000
- pci 0000:00:1c.7: bridge window [io 0x1000-0x0fff] to [bus 0a-0b] add_size 1000
- pci 0000:00:1c.7: bridge window [mem 0x00100000-0x000fffff] to [bus 0a-0b] add_size 400000
- pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
- pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
- pci 0000:00:1c.2: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
- pci 0000:00:1c.3: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
- pci 0000:00:1c.7: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
- pci 0000:00:1c.7: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
- pci 0000:00:1c.0: BAR 9: assigned [mem 0x90000000-0x901fffff 64bit pref]
- pci 0000:00:1c.1: BAR 9: assigned [mem 0x90200000-0x903fffff 64bit pref]
- pci 0000:00:1c.2: BAR 9: assigned [mem 0x90400000-0x905fffff 64bit pref]
- pci 0000:00:1c.3: BAR 9: assigned [mem 0x90600000-0x907fffff 64bit pref]
- pci 0000:00:1c.7: BAR 8: assigned [mem 0x90800000-0x90bfffff]
- pci 0000:00:1c.7: BAR 7: assigned [io 0x6000-0x6fff]
- pci 0000:00:01.0: PCI bridge to [bus 01]
- pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf20fffff]
- pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
- pci 0000:00:02.0: PCI bridge to [bus 02]
- pci 0000:00:02.0: bridge window [mem 0xf2300000-0xf23fffff]
- pci 0000:00:02.2: PCI bridge to [bus 03]
- pci 0000:00:02.2: bridge window [mem 0xf2400000-0xf24fffff 64bit pref]
- pci 0000:04:00.0: PCI bridge to [bus 05]
- pci 0000:04:00.0: bridge window [mem 0xf2100000-0xf21fffff]
- pci 0000:00:03.0: PCI bridge to [bus 04-05]
- pci 0000:00:03.0: bridge window [mem 0xf2100000-0xf22fffff]
- pci 0000:00:1c.0: PCI bridge to [bus 06]
- pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
- pci 0000:00:1c.0: bridge window [mem 0xf2500000-0xf25fffff]
- pci 0000:00:1c.0: bridge window [mem 0x90000000-0x901fffff 64bit pref]
- pci 0000:00:1c.1: PCI bridge to [bus 07]
- pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
- pci 0000:00:1c.1: bridge window [mem 0xf2600000-0xf26fffff]
- pci 0000:00:1c.1: bridge window [mem 0x90200000-0x903fffff 64bit pref]
- pci 0000:00:1c.2: PCI bridge to [bus 08]
- pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
- pci 0000:00:1c.2: bridge window [mem 0xf2700000-0xf27fffff]
- pci 0000:00:1c.2: bridge window [mem 0x90400000-0x905fffff 64bit pref]
- pci 0000:00:1c.3: PCI bridge to [bus 09]
- pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
- pci 0000:00:1c.3: bridge window [mem 0xf2800000-0xf28fffff]
- pci 0000:00:1c.3: bridge window [mem 0x90600000-0x907fffff 64bit pref]
- pci 0000:0a:00.0: PCI bridge to [bus 0b]
- pci 0000:00:1c.7: PCI bridge to [bus 0a-0b]
- pci 0000:00:1c.7: bridge window [io 0x6000-0x6fff]
- pci 0000:00:1c.7: bridge window [mem 0x90800000-0x90bfffff]
- pci 0000:00:1c.7: bridge window [mem 0xf2900000-0xf29fffff 64bit pref]
- pci 0000:ff:12.0: BAR 2: can't assign mem (size 0x40)
- pci 0000:ff:12.0: BAR 4: can't assign mem (size 0x40)
- pci 0000:ff:12.0: BAR 1: can't assign mem (size 0x10)
- pci 0000:ff:12.0: BAR 3: can't assign mem (size 0x10)
- pci 0000:ff:12.0: BAR 5: can't assign mem (size 0x10)
- pci 0000:ff:1e.3: BAR 0: can't assign mem (size 0x10)
- pci 0000:ff:1e.3: BAR 0: trying firmware assignment [mem 0x00000010-0x0000001f]
- pci 0000:ff:1e.3: BAR 0: [mem 0x00000010-0x0000001f] conflicts with reserved [mem 0x00000000-0x00000fff]
- Some PCI device resources are unassigned, try booting with pci=realloc
- pci 0000:00:1c.7: enabling device (0006 -> 0007)
- pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- pci_bus 0000:00: resource 5 [io 0x0d00-0xf7ff]
- pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
- pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
- pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
- pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
- pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
- pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
- pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
- pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
- pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
- pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
- pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
- pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff]
- pci_bus 0000:00: resource 19 [mem 0x7f000000-0xfdffffff]
- pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf20fffff]
- pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
- pci_bus 0000:02: resource 1 [mem 0xf2300000-0xf23fffff]
- pci_bus 0000:03: resource 2 [mem 0xf2400000-0xf24fffff 64bit pref]
- pci_bus 0000:04: resource 1 [mem 0xf2100000-0xf22fffff]
- pci_bus 0000:05: resource 1 [mem 0xf2100000-0xf21fffff]
- pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
- pci_bus 0000:06: resource 1 [mem 0xf2500000-0xf25fffff]
- pci_bus 0000:06: resource 2 [mem 0x90000000-0x901fffff 64bit pref]
- pci_bus 0000:07: resource 0 [io 0x2000-0x2fff]
- pci_bus 0000:07: resource 1 [mem 0xf2600000-0xf26fffff]
- pci_bus 0000:07: resource 2 [mem 0x90200000-0x903fffff 64bit pref]
- pci_bus 0000:08: resource 0 [io 0x3000-0x3fff]
- pci_bus 0000:08: resource 1 [mem 0xf2700000-0xf27fffff]
- pci_bus 0000:08: resource 2 [mem 0x90400000-0x905fffff 64bit pref]
- pci_bus 0000:09: resource 0 [io 0x4000-0x4fff]
- pci_bus 0000:09: resource 1 [mem 0xf2800000-0xf28fffff]
- pci_bus 0000:09: resource 2 [mem 0x90600000-0x907fffff 64bit pref]
- pci_bus 0000:0a: resource 0 [io 0x6000-0x6fff]
- pci_bus 0000:0a: resource 1 [mem 0x90800000-0x90bfffff]
- pci_bus 0000:0a: resource 2 [mem 0xf2900000-0xf29fffff 64bit pref]
- pci_bus 0000:ff: resource 4 [io 0xf800-0xffff]
- pci_bus 0000:ff: resource 5 [mem 0xfe000000-0xfebfffff]
- initcall pcibios_assign_resources+0x0/0xba returned 0 after 570949 usecs
- calling sysctl_core_init+0x0/0x2c @ 1
- initcall sysctl_core_init+0x0/0x2c returned 0 after 20 usecs
- calling inet_init+0x0/0x29f @ 1
- NET: Registered protocol family 2
- TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
- TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- TCP: Hash tables configured (established 65536 bind 65536)
- TCP: reno registered
- UDP hash table entries: 4096 (order: 5, 131072 bytes)
- UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
- initcall inet_init+0x0/0x29f returned 0 after 33842 usecs
- calling ipv4_offload_init+0x0/0x68 @ 1
- initcall ipv4_offload_init+0x0/0x68 returned 0 after 0 usecs
- calling af_unix_init+0x0/0x50 @ 1
- NET: Registered protocol family 1
- initcall af_unix_init+0x0/0x50 returned 0 after 3262 usecs
- calling ipv6_offload_init+0x0/0x6e @ 1
- initcall ipv6_offload_init+0x0/0x6e returned 0 after 0 usecs
- calling init_sunrpc+0x0/0x6d @ 1
- RPC: Registered named UNIX socket transport module.
- RPC: Registered udp transport module.
- RPC: Registered tcp transport module.
- RPC: Registered tcp NFSv4.1 backchannel transport module.
- initcall init_sunrpc+0x0/0x6d returned 0 after 17405 usecs
- calling pci_apply_final_quirks+0x0/0xed @ 1
- pci 0000:01:00.0: Boot video device
- PCI: CLS 64 bytes, default 64
- initcall pci_apply_final_quirks+0x0/0xed returned 0 after 9316 usecs
- calling populate_rootfs+0x0/0xd1 @ 1
- Trying to unpack rootfs image as initramfs...
- Freeing initrd memory: 2840k freed
- initcall populate_rootfs+0x0/0xd1 returned 0 after 149359 usecs
- calling pci_iommu_init+0x0/0x3c @ 1
- PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- software IO TLB [mem 0x7afe2000-0x7efe2000] (64MB) mapped at [ffff88007afe2000-ffff88007efe1fff]
- initcall pci_iommu_init+0x0/0x3c returned 0 after 14117 usecs
- calling i8259A_init_ops+0x0/0x24 @ 1
- initcall i8259A_init_ops+0x0/0x24 returned 0 after 0 usecs
- calling vsyscall_init+0x0/0x1b @ 1
- initcall vsyscall_init+0x0/0x1b returned 0 after 25 usecs
- calling sbf_init+0x0/0xf5 @ 1
- initcall sbf_init+0x0/0xf5 returned 0 after 0 usecs
- calling init_tsc_clocksource+0x0/0xb7 @ 1
- initcall init_tsc_clocksource+0x0/0xb7 returned 0 after 1 usecs
- calling add_rtc_cmos+0x0/0x99 @ 1
- initcall add_rtc_cmos+0x0/0x99 returned 0 after 5 usecs
- calling i8237A_init_ops+0x0/0x14 @ 1
- initcall i8237A_init_ops+0x0/0x14 returned 0 after 0 usecs
- calling cache_sysfs_init+0x0/0x2ea @ 1
- initcall cache_sysfs_init+0x0/0x2ea returned 0 after 795 usecs
- calling intel_uncore_init+0x0/0x357 @ 1
- initcall intel_uncore_init+0x0/0x357 returned 0 after 1 usecs
- calling thermal_throttle_init_device+0x0/0x11d @ 1
- initcall thermal_throttle_init_device+0x0/0x11d returned 0 after 95 usecs
- calling amd_ibs_init+0x0/0x1cc @ 1
- initcall amd_ibs_init+0x0/0x1cc returned -19 after 0 usecs
- calling msr_init+0x0/0x137 @ 1
- initcall msr_init+0x0/0x137 returned 0 after 1404 usecs
- calling cpuid_init+0x0/0x137 @ 1
- initcall cpuid_init+0x0/0x137 returned 0 after 1261 usecs
- calling ioapic_init_ops+0x0/0x14 @ 1
- initcall ioapic_init_ops+0x0/0x14 returned 0 after 0 usecs
- calling crc32c_intel_mod_init+0x0/0x66 @ 1
- initcall crc32c_intel_mod_init+0x0/0x66 returned 0 after 55 usecs
- calling ia32_binfmt_init+0x0/0x14 @ 1
- initcall ia32_binfmt_init+0x0/0x14 returned 0 after 7 usecs
- calling proc_execdomains_init+0x0/0x22 @ 1
- initcall proc_execdomains_init+0x0/0x22 returned 0 after 5 usecs
- calling ioresources_init+0x0/0x3c @ 1
- initcall ioresources_init+0x0/0x3c returned 0 after 3 usecs
- calling uid_cache_init+0x0/0x88 @ 1
- initcall uid_cache_init+0x0/0x88 returned 0 after 4 usecs
- calling init_posix_timers+0x0/0x203 @ 1
- initcall init_posix_timers+0x0/0x203 returned 0 after 17 usecs
- calling init_posix_cpu_timers+0x0/0xb9 @ 1
- initcall init_posix_cpu_timers+0x0/0xb9 returned 0 after 1 usecs
- calling timekeeping_init_ops+0x0/0x14 @ 1
- initcall timekeeping_init_ops+0x0/0x14 returned 0 after 1 usecs
- calling init_clocksource_sysfs+0x0/0x52 @ 1
- initcall init_clocksource_sysfs+0x0/0x52 returned 0 after 133 usecs
- calling init_timer_list_procfs+0x0/0x2c @ 1
- initcall init_timer_list_procfs+0x0/0x2c returned 0 after 2 usecs
- calling alarmtimer_init+0x0/0x106 @ 1
- initcall alarmtimer_init+0x0/0x106 returned 0 after 125 usecs
- calling futex_init+0x0/0x49 @ 1
- initcall futex_init+0x0/0x49 returned 0 after 7 usecs
- calling proc_dma_init+0x0/0x22 @ 1
- initcall proc_dma_init+0x0/0x22 returned 0 after 2 usecs
- calling proc_modules_init+0x0/0x22 @ 1
- initcall proc_modules_init+0x0/0x22 returned 0 after 2 usecs
- calling kallsyms_init+0x0/0x25 @ 1
- initcall kallsyms_init+0x0/0x25 returned 0 after 2 usecs
- calling crash_save_vmcoreinfo_init+0x0/0x540 @ 1
- initcall crash_save_vmcoreinfo_init+0x0/0x540 returned 0 after 49 usecs
- calling crash_notes_memory_init+0x0/0x36 @ 1
- initcall crash_notes_memory_init+0x0/0x36 returned 0 after 6 usecs
- calling ikconfig_init+0x0/0x3e @ 1
- initcall ikconfig_init+0x0/0x3e returned 0 after 2 usecs
- calling utsname_sysctl_init+0x0/0x14 @ 1
- initcall utsname_sysctl_init+0x0/0x14 returned 0 after 12 usecs
- calling perf_event_sysfs_init+0x0/0x93 @ 1
- initcall perf_event_sysfs_init+0x0/0x93 returned 0 after 252 usecs
- calling init_per_zone_wmark_min+0x0/0x84 @ 1
- initcall init_per_zone_wmark_min+0x0/0x84 returned 0 after 188 usecs
- calling kswapd_init+0x0/0x14 @ 1
- initcall kswapd_init+0x0/0x14 returned 0 after 55 usecs
- calling setup_vmstat+0x0/0xae @ 1
- initcall setup_vmstat+0x0/0xae returned 0 after 40 usecs
- calling mm_sysfs_init+0x0/0x29 @ 1
- initcall mm_sysfs_init+0x0/0x29 returned 0 after 3 usecs
- calling init_reserve_notifier+0x0/0x8 @ 1
- initcall init_reserve_notifier+0x0/0x8 returned 0 after 0 usecs
- calling init_admin_reserve+0x0/0x36 @ 1
- initcall init_admin_reserve+0x0/0x36 returned 0 after 0 usecs
- calling init_user_reserve+0x0/0x36 @ 1
- initcall init_user_reserve+0x0/0x36 returned 0 after 0 usecs
- calling proc_vmalloc_init+0x0/0x25 @ 1
- initcall proc_vmalloc_init+0x0/0x25 returned 0 after 3 usecs
- calling procswaps_init+0x0/0x22 @ 1
- initcall procswaps_init+0x0/0x22 returned 0 after 2 usecs
- calling slab_sysfs_init+0x0/0xf6 @ 1
- initcall slab_sysfs_init+0x0/0xf6 returned 0 after 4505 usecs
- calling fcntl_init+0x0/0x2a @ 1
- initcall fcntl_init+0x0/0x2a returned 0 after 4 usecs
- calling proc_filesystems_init+0x0/0x22 @ 1
- initcall proc_filesystems_init+0x0/0x22 returned 0 after 3 usecs
- calling dio_init+0x0/0x2d @ 1
- initcall dio_init+0x0/0x2d returned 0 after 3 usecs
- calling fsnotify_mark_init+0x0/0x40 @ 1
- initcall fsnotify_mark_init+0x0/0x40 returned 0 after 33 usecs
- calling dnotify_init+0x0/0x7b @ 1
- initcall dnotify_init+0x0/0x7b returned 0 after 98 usecs
- calling inotify_user_setup+0x0/0x70 @ 1
- initcall inotify_user_setup+0x0/0x70 returned 0 after 7 usecs
- calling aio_setup+0x0/0x52 @ 1
- initcall aio_setup+0x0/0x52 returned 0 after 6 usecs
- calling proc_locks_init+0x0/0x22 @ 1
- initcall proc_locks_init+0x0/0x22 returned 0 after 2 usecs
- calling init_sys32_ioctl+0x0/0x28 @ 1
- initcall init_sys32_ioctl+0x0/0x28 returned 0 after 129 usecs
- calling init_mbcache+0x0/0x14 @ 1
- initcall init_mbcache+0x0/0x14 returned 0 after 0 usecs
- calling proc_cmdline_init+0x0/0x22 @ 1
- initcall proc_cmdline_init+0x0/0x22 returned 0 after 2 usecs
- calling proc_consoles_init+0x0/0x22 @ 1
- initcall proc_consoles_init+0x0/0x22 returned 0 after 2 usecs
- calling proc_cpuinfo_init+0x0/0x22 @ 1
- initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 2 usecs
- calling proc_devices_init+0x0/0x22 @ 1
- initcall proc_devices_init+0x0/0x22 returned 0 after 2 usecs
- calling proc_interrupts_init+0x0/0x22 @ 1
- initcall proc_interrupts_init+0x0/0x22 returned 0 after 2 usecs
- calling proc_loadavg_init+0x0/0x22 @ 1
- initcall proc_loadavg_init+0x0/0x22 returned 0 after 2 usecs
- calling proc_meminfo_init+0x0/0x22 @ 1
- initcall proc_meminfo_init+0x0/0x22 returned 0 after 2 usecs
- calling proc_stat_init+0x0/0x22 @ 1
- initcall proc_stat_init+0x0/0x22 returned 0 after 2 usecs
- calling proc_uptime_init+0x0/0x22 @ 1
- initcall proc_uptime_init+0x0/0x22 returned 0 after 2 usecs
- calling proc_version_init+0x0/0x22 @ 1
- initcall proc_version_init+0x0/0x22 returned 0 after 2 usecs
- calling proc_softirqs_init+0x0/0x22 @ 1
- initcall proc_softirqs_init+0x0/0x22 returned 0 after 2 usecs
- calling proc_kcore_init+0x0/0xa9 @ 1
- initcall proc_kcore_init+0x0/0xa9 returned 0 after 7 usecs
- calling vmcore_init+0x0/0x6e1 @ 1
- initcall vmcore_init+0x0/0x6e1 returned 0 after 0 usecs
- calling proc_kmsg_init+0x0/0x25 @ 1
- initcall proc_kmsg_init+0x0/0x25 returned 0 after 2 usecs
- calling init_devpts_fs+0x0/0x62 @ 1
- initcall init_devpts_fs+0x0/0x62 returned 0 after 42 usecs
- calling init_ext3_fs+0x0/0x7a @ 1
- initcall init_ext3_fs+0x0/0x7a returned 0 after 167 usecs
- calling init_ext2_fs+0x0/0x63 @ 1
- initcall init_ext2_fs+0x0/0x63 returned 0 after 77 usecs
- calling ext4_init_fs+0x0/0x20b @ 1
- initcall ext4_init_fs+0x0/0x20b returned 0 after 348 usecs
- calling journal_init+0x0/0xa4 @ 1
- initcall journal_init+0x0/0xa4 returned 0 after 329 usecs
- calling journal_init+0x0/0x10c @ 1
- initcall journal_init+0x0/0x10c returned 0 after 92 usecs
- calling init_ramfs_fs+0x0/0x12 @ 1
- initcall init_ramfs_fs+0x0/0x12 returned 0 after 2 usecs
- calling init_fat_fs+0x0/0x4a @ 1
- initcall init_fat_fs+0x0/0x4a returned 0 after 150 usecs
- calling init_vfat_fs+0x0/0x12 @ 1
- initcall init_vfat_fs+0x0/0x12 returned 0 after 2 usecs
- calling init_msdos_fs+0x0/0x12 @ 1
- initcall init_msdos_fs+0x0/0x12 returned 0 after 2 usecs
- calling init_iso9660_fs+0x0/0x63 @ 1
- initcall init_iso9660_fs+0x0/0x63 returned 0 after 82 usecs
- calling init_nfs_fs+0x0/0x127 @ 1
- initcall init_nfs_fs+0x0/0x127 returned 0 after 460 usecs
- calling init_nfs_v2+0x0/0x14 @ 1
- initcall init_nfs_v2+0x0/0x14 returned 0 after 0 usecs
- calling init_nfs_v3+0x0/0x14 @ 1
- initcall init_nfs_v3+0x0/0x14 returned 0 after 0 usecs
- calling init_nfs_v4+0x0/0x3b @ 1
- NFS: Registering the id_resolver key type
- Key type id_resolver registered
- Key type id_legacy registered
- initcall init_nfs_v4+0x0/0x3b returned 0 after 9958 usecs
- calling init_nlm+0x0/0x49 @ 1
- initcall init_nlm+0x0/0x49 returned 0 after 10 usecs
- calling init_nls_cp437+0x0/0x12 @ 1
- initcall init_nls_cp437+0x0/0x12 returned 0 after 1 usecs
- calling init_nls_ascii+0x0/0x12 @ 1
- initcall init_nls_ascii+0x0/0x12 returned 0 after 0 usecs
- calling init_nls_iso8859_1+0x0/0x12 @ 1
- initcall init_nls_iso8859_1+0x0/0x12 returned 0 after 0 usecs
- calling init_nls_utf8+0x0/0x25 @ 1
- initcall init_nls_utf8+0x0/0x25 returned 0 after 1 usecs
- calling init_jffs2_fs+0x0/0xc2 @ 1
- jffs2: version 2.2. (NAND) (SUMMARY) �ͩ 2001-2006 Red Hat, Inc.
- initcall init_jffs2_fs+0x0/0xc2 returned 0 after 6013 usecs
- calling init_autofs4_fs+0x0/0x27 @ 1
- initcall init_autofs4_fs+0x0/0x27 returned 0 after 89 usecs
- calling ipc_init+0x0/0x23 @ 1
- msgmni has been set to 15918
- initcall ipc_init+0x0/0x23 returned 0 after 2847 usecs
- calling ipc_sysctl_init+0x0/0x14 @ 1
- initcall ipc_sysctl_init+0x0/0x14 returned 0 after 14 usecs
- calling init_mqueue_fs+0x0/0xa0 @ 1
- initcall init_mqueue_fs+0x0/0xa0 returned 0 after 139 usecs
- calling key_proc_init+0x0/0x33 @ 1
- initcall key_proc_init+0x0/0x33 returned 0 after 4 usecs
- calling crypto_wq_init+0x0/0x33 @ 1
- initcall crypto_wq_init+0x0/0x33 returned 0 after 80 usecs
- calling crypto_algapi_init+0x0/0xd @ 1
- initcall crypto_algapi_init+0x0/0xd returned 0 after 3 usecs
- calling skcipher_module_init+0x0/0x32 @ 1
- initcall skcipher_module_init+0x0/0x32 returned 0 after 0 usecs
- calling chainiv_module_init+0x0/0x12 @ 1
- initcall chainiv_module_init+0x0/0x12 returned 0 after 1 usecs
- calling eseqiv_module_init+0x0/0x12 @ 1
- initcall eseqiv_module_init+0x0/0x12 returned 0 after 0 usecs
- calling hmac_module_init+0x0/0x12 @ 1
- initcall hmac_module_init+0x0/0x12 returned 0 after 1 usecs
- calling md5_mod_init+0x0/0x12 @ 1
- initcall md5_mod_init+0x0/0x12 returned 0 after 51 usecs
- calling sha1_generic_mod_init+0x0/0x12 @ 1
- initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 46 usecs
- calling crypto_cbc_module_init+0x0/0x12 @ 1
- initcall crypto_cbc_module_init+0x0/0x12 returned 0 after 1 usecs
- calling des_generic_mod_init+0x0/0x17 @ 1
- initcall des_generic_mod_init+0x0/0x17 returned 0 after 94 usecs
- calling aes_init+0x0/0x12 @ 1
- initcall aes_init+0x0/0x12 returned 0 after 46 usecs
- calling crc32c_mod_init+0x0/0x12 @ 1
- initcall crc32c_mod_init+0x0/0x12 returned 0 after 50 usecs
- calling crypto_authenc_module_init+0x0/0x12 @ 1
- initcall crypto_authenc_module_init+0x0/0x12 returned 0 after 1 usecs
- calling crypto_authenc_esn_module_init+0x0/0x12 @ 1
- initcall crypto_authenc_esn_module_init+0x0/0x12 returned 0 after 0 usecs
- calling krng_mod_init+0x0/0x12 @ 1
- initcall krng_mod_init+0x0/0x12 returned 0 after 50 usecs
- calling proc_genhd_init+0x0/0x3c @ 1
- initcall proc_genhd_init+0x0/0x3c returned 0 after 4 usecs
- calling bsg_init+0x0/0x12a @ 1
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
- initcall bsg_init+0x0/0x12a returned 0 after 6380 usecs
- calling noop_init+0x0/0x12 @ 1
- io scheduler noop registered
- initcall noop_init+0x0/0x12 returned 0 after 2831 usecs
- calling deadline_init+0x0/0x12 @ 1
- io scheduler deadline registered
- initcall deadline_init+0x0/0x12 returned 0 after 3173 usecs
- calling cfq_init+0x0/0x88 @ 1
- tsc: Refined TSC clocksource calibration: 1799.998 MHz
- io scheduler cfq registered (default)
- initcall cfq_init+0x0/0x88 returned 0 after 104 usecs
- calling percpu_counter_startup+0x0/0x29 @ 1
- initcall percpu_counter_startup+0x0/0x29 returned 0 after 0 usecs
- calling ichx_gpio_driver_init+0x0/0x12 @ 1
- initcall ichx_gpio_driver_init+0x0/0x12 returned 0 after 68 usecs
- calling pci_proc_init+0x0/0x65 @ 1
- initcall pci_proc_init+0x0/0x65 returned 0 after 243 usecs
- calling pcie_portdrv_init+0x0/0x75 @ 1
- pcieport 0000:04:00.0: irq 40 for MSI/MSI-X
- initcall pcie_portdrv_init+0x0/0x75 returned 0 after 816 usecs
- calling aer_service_init+0x0/0x22 @ 1
- initcall aer_service_init+0x0/0x22 returned 0 after 59 usecs
- calling ioapic_init+0x0/0x1b @ 1
- ioapic: probe of 0000:00:05.4 failed with error -22
- initcall ioapic_init+0x0/0x1b returned 0 after 91 usecs
- calling fb_console_init+0x0/0x195 @ 1
- Switching to clocksource tsc
- initcall fb_console_init+0x0/0x195 returned 0 after 83804 usecs
- calling genericbl_driver_init+0x0/0x12 @ 1
- initcall genericbl_driver_init+0x0/0x12 returned 0 after 179 usecs
- calling acpi_reserve_resources+0x0/0xeb @ 1
- initcall acpi_reserve_resources+0x0/0xeb returned 0 after 4 usecs
- calling acpi_button_driver_init+0x0/0x12 @ 1
- input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
- ACPI: Power Button [PWRF]
- initcall acpi_button_driver_init+0x0/0x12 returned 0 after 9027 usecs
- calling acpi_video_init+0x0/0x89 @ 1
- initcall acpi_video_init+0x0/0x89 returned 0 after 111 usecs
- calling acpi_processor_init+0x0/0x38 @ 1
- initcall acpi_processor_init+0x0/0x38 returned 0 after 70 usecs
- calling acpi_thermal_init+0x0/0x42 @ 1
- initcall acpi_thermal_init+0x0/0x42 returned 0 after 65 usecs
- calling pty_init+0x0/0x20d @ 1
- initcall pty_init+0x0/0x20d returned 0 after 92 usecs
- calling sysrq_init+0x0/0x44 @ 1
- initcall sysrq_init+0x0/0x44 returned 0 after 8 usecs
- calling serial8250_init+0x0/0x141 @ 1
- Serial: 8250/16550 driver, 12 ports, IRQ sharing enabled
- 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- 00:09: ttyS4 at I/O 0x3e0 (irq = 5) is a 16550A
- 00:0a: ttyS3 at I/O 0x2e8 (irq = 7) is a 16550A
- initcall serial8250_init+0x0/0x141 returned 0 after 105023 usecs
- calling serial_pci_driver_init+0x0/0x1b @ 1
- initcall serial_pci_driver_init+0x0/0x1b returned 0 after 339 usecs
- calling rand_initialize+0x0/0x2c @ 1
- initcall rand_initialize+0x0/0x2c returned 0 after 29 usecs
- calling hpet_init+0x0/0x65 @ 1
- initcall hpet_init+0x0/0x65 returned 0 after 280 usecs
- calling agp_init+0x0/0x29 @ 1
- Linux agpgart interface v0.103
- initcall agp_init+0x0/0x29 returned 0 after 3003 usecs
- calling agp_intel_init+0x0/0x2a @ 1
- initcall agp_intel_init+0x0/0x2a returned 0 after 125 usecs
- calling drm_core_init+0x0/0x10f @ 1
- [drm] Initialized drm 1.1.0 20060810
- initcall drm_core_init+0x0/0x10f returned 0 after 3580 usecs
- calling i915_init+0x0/0x68 @ 1
- initcall i915_init+0x0/0x68 returned 0 after 179 usecs
- calling topology_sysfs_init+0x0/0x4a @ 1
- initcall topology_sysfs_init+0x0/0x4a returned 0 after 113 usecs
- calling brd_init+0x0/0x1d4 @ 1
- brd: module loaded
- initcall brd_init+0x0/0x1d4 returned 0 after 5100 usecs
- calling loop_init+0x0/0x14c @ 1
- loop: module loaded
- initcall loop_init+0x0/0x14c returned 0 after 3747 usecs
- calling ds1682_driver_init+0x0/0x14 @ 1
- initcall ds1682_driver_init+0x0/0x14 returned 0 after 56 usecs
- calling at24_init+0x0/0x46 @ 1
- initcall at24_init+0x0/0x46 returned 0 after 53 usecs
- calling lpc_sch_driver_init+0x0/0x1b @ 1
- initcall lpc_sch_driver_init+0x0/0x1b returned 0 after 79 usecs
- calling lpc_ich_init+0x0/0x1b @ 1
- gpio_ich: GPIO from 180 to 255 on gpio_ich
- initcall lpc_ich_init+0x0/0x1b returned 0 after 4514 usecs
- calling mac_hid_init+0x0/0x22 @ 1
- initcall mac_hid_init+0x0/0x22 returned 0 after 7 usecs
- calling spi_transport_init+0x0/0x76 @ 1
- initcall spi_transport_init+0x0/0x76 returned 0 after 103 usecs
- calling iscsi_transport_init+0x0/0x1ae @ 1
- Loading iSCSI transport class v2.0-870.
- initcall iscsi_transport_init+0x0/0x1ae returned 0 after 4170 usecs
- calling init_sd+0x0/0x126 @ 1
- initcall init_sd+0x0/0x126 returned 0 after 117 usecs
- calling init_sr+0x0/0x42 @ 1
- initcall init_sr+0x0/0x42 returned 0 after 54 usecs
- calling ahci_pci_driver_init+0x0/0x1b @ 1
- ahci 0000:00:1f.2: version 3.0
- ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
- ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
- ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
- ahci 0000:00:1f.2: setting latency timer to 64
- scsi0 : ahci
- scsi1 : ahci
- scsi2 : ahci
- scsi3 : ahci
- scsi4 : ahci
- scsi5 : ahci
- ata1: SATA max UDMA/133 abar m2048@0xf2a06000 port 0xf2a06100 irq 41
- ata2: SATA max UDMA/133 abar m2048@0xf2a06000 port 0xf2a06180 irq 41
- ata3: SATA max UDMA/133 abar m2048@0xf2a06000 port 0xf2a06200 irq 41
- ata4: SATA max UDMA/133 abar m2048@0xf2a06000 port 0xf2a06280 irq 41
- ata5: SATA max UDMA/133 abar m2048@0xf2a06000 port 0xf2a06300 irq 41
- ata6: SATA max UDMA/133 abar m2048@0xf2a06000 port 0xf2a06380 irq 41
- calling 1_async_port_probe+0x0/0x4a @ 6
- calling 2_async_port_probe+0x0/0x4a @ 72
- calling 3_async_port_probe+0x0/0x4a @ 953
- calling 4_async_port_probe+0x0/0x4a @ 954
- calling 5_async_port_probe+0x0/0x4a @ 955
- calling 6_async_port_probe+0x0/0x4a @ 956
- initcall ahci_pci_driver_init+0x0/0x1b returned 0 after 83315 usecs
- calling piix_init+0x0/0x29 @ 1
- initcall piix_init+0x0/0x29 returned 0 after 154 usecs
- calling init_mtd+0x0/0xf0 @ 1
- initcall init_mtd+0x0/0xf0 returned 0 after 287 usecs
- calling cfi_probe_init+0x0/0x14 @ 1
- initcall cfi_probe_init+0x0/0x14 returned 0 after 0 usecs
- calling jedec_probe_init+0x0/0x14 @ 1
- initcall jedec_probe_init+0x0/0x14 returned 0 after 0 usecs
- calling init_esb2rom+0x0/0x5c3 @ 1
- device id = 2440
- device id = 2480
- device id = 24c0
- device id = 24d0
- device id = 25a1
- device id = 2670
- initcall init_esb2rom+0x0/0x5c3 returned -6 after 82 usecs
- calling net_olddevs_init+0x0/0x5b @ 1
- initcall net_olddevs_init+0x0/0x5b returned 0 after 4 usecs
- calling e1000_init_module+0x0/0x82 @ 1
- e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
- e1000: Copyright (c) 1999-2006 Intel Corporation.
- initcall e1000_init_module+0x0/0x82 returned 0 after 113 usecs
- calling e1000_init_module+0x0/0x3e @ 1
- e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
- e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
- initcall e1000_init_module+0x0/0x3e returned 0 after 127 usecs
- calling igb_init_module+0x0/0x4c @ 1
- igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.3-k
- igb: Copyright (c) 2007-2013 Intel Corporation.
- igb 0000:06:00.0: irq 42 for MSI/MSI-X
- igb 0000:06:00.0: irq 43 for MSI/MSI-X
- igb 0000:06:00.0: irq 44 for MSI/MSI-X
- igb 0000:06:00.0: irq 45 for MSI/MSI-X
- igb 0000:06:00.0: irq 46 for MSI/MSI-X
- igb 0000:06:00.0: added PHC on eth0
- igb 0000:06:00.0: Intel(R) Gigabit Ethernet Network Connection
- igb 0000:06:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:17:3c:02:f3:92
- igb 0000:06:00.0: eth0: PBA No: FFFFFF-0FF
- igb 0000:06:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
- igb 0000:07:00.0: irq 47 for MSI/MSI-X
- igb 0000:07:00.0: irq 48 for MSI/MSI-X
- igb 0000:07:00.0: irq 49 for MSI/MSI-X
- igb 0000:07:00.0: irq 50 for MSI/MSI-X
- igb 0000:07:00.0: irq 51 for MSI/MSI-X
- igb 0000:07:00.0: added PHC on eth1
- igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection
- igb 0000:07:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 00:17:3c:02:f3:93
- igb 0000:07:00.0: eth1: PBA No: FFFFFF-0FF
- igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
- igb 0000:08:00.0: irq 52 for MSI/MSI-X
- igb 0000:08:00.0: irq 53 for MSI/MSI-X
- igb 0000:08:00.0: irq 54 for MSI/MSI-X
- igb 0000:08:00.0: irq 55 for MSI/MSI-X
- igb 0000:08:00.0: irq 56 for MSI/MSI-X
- igb 0000:08:00.0: added PHC on eth2
- igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection
- igb 0000:08:00.0: eth2: (PCIe:2.5Gb/s:Width x1) 00:17:3c:02:f3:94
- igb 0000:08:00.0: eth2: PBA No: FFFFFF-0FF
- igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
- igb 0000:09:00.0: irq 57 for MSI/MSI-X
- igb 0000:09:00.0: irq 58 for MSI/MSI-X
- igb 0000:09:00.0: irq 59 for MSI/MSI-X
- igb 0000:09:00.0: irq 60 for MSI/MSI-X
- igb 0000:09:00.0: irq 61 for MSI/MSI-X
- igb 0000:09:00.0: added PHC on eth3
- igb 0000:09:00.0: Intel(R) Gigabit Ethernet Network Connection
- igb 0000:09:00.0: eth3: (PCIe:2.5Gb/s:Width x1) 00:17:3c:02:f3:95
- igb 0000:09:00.0: eth3: PBA No: FFFFFF-0FF
- igb 0000:09:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
- initcall igb_init_module+0x0/0x4c returned 0 after 109026 usecs
- calling ixgbe_init_module+0x0/0x4c @ 1
- ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.13.10-k
- ixgbe: Copyright (c) 1999-2013 Intel Corporation.
- initcall ixgbe_init_module+0x0/0x4c returned 0 after 110 usecs
- calling cdrom_init+0x0/0x19 @ 1
- initcall cdrom_init+0x0/0x19 returned 0 after 7 usecs
- calling ehci_hcd_init+0x0/0x5d @ 1
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- initcall ehci_hcd_init+0x0/0x5d returned 0 after 1 usecs
- calling ehci_pci_init+0x0/0x69 @ 1
- ehci-pci: EHCI PCI platform driver
- ehci-pci 0000:00:1d.0: setting latency timer to 64
- ehci-pci 0000:00:1d.0: EHCI Host Controller
- ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
- ehci-pci 0000:00:1d.0: debug port 2
- ehci-pci 0000:00:1d.0: can't setup
- ehci-pci 0000:00:1d.0: USB bus 1 deregistered
- ehci-pci 0000:00:1d.0: init 0000:00:1d.0 fail, -110
- ehci-pci: probe of 0000:00:1d.0 failed with error -110
- initcall ehci_pci_init+0x0/0x69 returned 0 after 6343 usecs
- calling ohci_hcd_mod_init+0x0/0x54 @ 1
- ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- initcall ohci_hcd_mod_init+0x0/0x54 returned 0 after 81 usecs
- calling uhci_hcd_init+0x0/0xbe @ 1
- uhci_hcd: USB Universal Host Controller Interface driver
- initcall uhci_hcd_init+0x0/0xbe returned 0 after 88 usecs
- calling usb_storage_driver_init+0x0/0x1b @ 1
- usbcore: registered new interface driver usb-storage
- initcall usb_storage_driver_init+0x0/0x1b returned 0 after 62 usecs
- calling mousedev_init+0x0/0x5c @ 1
- mousedev: PS/2 mouse device common for all mice
- initcall mousedev_init+0x0/0x5c returned 0 after 96 usecs
- calling evdev_init+0x0/0x12 @ 1
- initcall evdev_init+0x0/0x12 returned 0 after 78 usecs
- calling cmos_init+0x0/0x6a @ 1
- rtc_cmos 00:06: RTC can wake from S4
- rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
- rtc_cmos 00:06: alarms up to one month, 242 bytes nvram, hpet irqs
- initcall cmos_init+0x0/0x6a returned 0 after 340 usecs
- calling i2c_dev_init+0x0/0xc7 @ 1
- i2c /dev entries driver
- initcall i2c_dev_init+0x0/0xc7 returned 0 after 77 usecs
- calling i2c_i801_init+0x0/0xa4 @ 1
- i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
- initcall i2c_i801_init+0x0/0xa4 returned 0 after 633 usecs
- calling smbus_sch_driver_init+0x0/0x12 @ 1
- initcall smbus_sch_driver_init+0x0/0x12 returned 0 after 51 usecs
- calling adm1021_driver_init+0x0/0x14 @ 1
- initcall adm1021_driver_init+0x0/0x14 returned 0 after 3063 usecs
- calling coretemp_init+0x0/0x21b @ 1
- initcall coretemp_init+0x0/0x21b returned 0 after 382 usecs
- calling lm75_driver_init+0x0/0x14 @ 1
- initcall lm75_driver_init+0x0/0x14 returned 0 after 2935 usecs
- calling tmp102_driver_init+0x0/0x14 @ 1
- initcall tmp102_driver_init+0x0/0x14 returned 0 after 56 usecs
- calling iTCO_wdt_init_module+0x0/0x27 @ 1
- iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
- iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x0460)
- iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- initcall iTCO_wdt_init_module+0x0/0x27 returned 0 after 282 usecs
- calling i7core_init+0x0/0xb2 @ 1
- initcall i7core_init+0x0/0xb2 returned 0 after 90 usecs
- calling e752x_init+0x0/0x37 @ 1
- initcall e752x_init+0x0/0x37 returned 0 after 87 usecs
- calling cpufreq_gov_powersave_init+0x0/0x12 @ 1
- initcall cpufreq_gov_powersave_init+0x0/0x12 returned 0 after 0 usecs
- calling cpufreq_gov_dbs_init+0x0/0x12 @ 1
- initcall cpufreq_gov_dbs_init+0x0/0x12 returned 0 after 0 usecs
- calling cpufreq_gov_dbs_init+0x0/0x12 @ 1
- initcall cpufreq_gov_dbs_init+0x0/0x12 returned 0 after 0 usecs
- calling init_ladder+0x0/0x12 @ 1
- cpuidle: using governor ladder
- initcall init_ladder+0x0/0x12 returned 0 after 2 usecs
- calling init_menu+0x0/0x12 @ 1
- cpuidle: using governor menu
- initcall init_menu+0x0/0x12 returned 0 after 1 usecs
- calling dmi_sysfs_init+0x0/0x92 @ 1
- initcall dmi_sysfs_init+0x0/0x92 returned 0 after 100 usecs
- calling efivars_sysfs_init+0x0/0x1d9 @ 1
- initcall efivars_sysfs_init+0x0/0x1d9 returned 0 after 0 usecs
- calling hid_init+0x0/0x5c @ 1
- hidraw: raw HID events driver (C) Jiri Kosina
- initcall hid_init+0x0/0x5c returned 0 after 114 usecs
- calling hid_generic_init+0x0/0x1b @ 1
- initcall hid_generic_init+0x0/0x1b returned 0 after 59 usecs
- calling hid_init+0x0/0x54 @ 1
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- initcall hid_init+0x0/0x54 returned 0 after 66 usecs
- calling staging_init+0x0/0x8 @ 1
- initcall staging_init+0x0/0x8 returned 0 after 0 usecs
- calling vme_init+0x0/0x12 @ 1
- initcall vme_init+0x0/0x12 returned 0 after 57 usecs
- calling tsi148_driver_init+0x0/0x1b @ 1
- initcall tsi148_driver_init+0x0/0x1b returned 0 after 78 usecs
- calling vme_user_init+0x0/0x25 @ 1
- vme_user: VME User Space Access Driver
- initcall vme_user_init+0x0/0x25 returned 0 after 53 usecs
- calling alsa_hwdep_init+0x0/0x5f @ 1
- initcall alsa_hwdep_init+0x0/0x5f returned 0 after 5 usecs
- calling alsa_timer_init+0x0/0x157 @ 1
- initcall alsa_timer_init+0x0/0x157 returned 0 after 102 usecs
- calling snd_hrtimer_init+0x0/0xe1 @ 1
- initcall snd_hrtimer_init+0x0/0xe1 returned 0 after 1 usecs
- calling alsa_pcm_init+0x0/0x67 @ 1
- initcall alsa_pcm_init+0x0/0x67 returned 0 after 1 usecs
- calling snd_mem_init+0x0/0x2c @ 1
- initcall snd_mem_init+0x0/0x2c returned 0 after 3 usecs
- calling alsa_rawmidi_init+0x0/0x83 @ 1
- initcall alsa_rawmidi_init+0x0/0x83 returned 0 after 0 usecs
- calling alsa_mixer_oss_init+0x0/0x35 @ 1
- initcall alsa_mixer_oss_init+0x0/0x35 returned 0 after 0 usecs
- calling alsa_pcm_oss_init+0x0/0x86 @ 1
- initcall alsa_pcm_oss_init+0x0/0x86 returned 0 after 0 usecs
- calling alsa_seq_init+0x0/0x49 @ 1
- initcall alsa_seq_init+0x0/0x49 returned 0 after 89 usecs
- calling alsa_seq_device_init+0x0/0x56 @ 1
- initcall alsa_seq_device_init+0x0/0x56 returned 0 after 1 usecs
- calling alsa_seq_midi_event_init+0x0/0x8 @ 1
- initcall alsa_seq_midi_event_init+0x0/0x8 returned 0 after 0 usecs
- calling alsa_seq_oss_init+0x0/0x14e @ 1
- initcall alsa_seq_oss_init+0x0/0x14e returned 0 after 182 usecs
- calling alsa_seq_midi_init+0x0/0x3a @ 1
- initcall alsa_seq_midi_init+0x0/0x3a returned 0 after 1 usecs
- calling patch_hdmi_init+0x0/0x12 @ 1
- initcall patch_hdmi_init+0x0/0x12 returned 0 after 0 usecs
- calling azx_driver_init+0x0/0x1b @ 1
- snd_hda_intel 0000:00:1b.0: can't derive routing for PCI INT A
- snd_hda_intel 0000:00:1b.0: PCI INT A: no GSI
- snd_hda_intel 0000:00:1b.0: irq 62 for MSI/MSI-X
- hda-intel 0000:00:1b.0: no codecs found!
- snd_hda_intel 0000:00:1b.0: can't derive routing for PCI INT A
- initcall azx_driver_init+0x0/0x1b returned 0 after 4227 usecs
- calling snd_usb_audio_init+0x0/0x3d @ 1
- usbcore: registered new interface driver snd-usb-audio
- initcall snd_usb_audio_init+0x0/0x3d returned 0 after 68 usecs
- calling sock_diag_init+0x0/0x12 @ 1
- initcall sock_diag_init+0x0/0x12 returned 0 after 4 usecs
- calling flow_cache_init_global+0x0/0x16e @ 1
- initcall flow_cache_init_global+0x0/0x16e returned 0 after 146 usecs
- calling sysctl_ipv4_init+0x0/0x80 @ 1
- initcall sysctl_ipv4_init+0x0/0x80 returned 0 after 99 usecs
- calling init_syncookies+0x0/0x19 @ 1
- initcall init_syncookies+0x0/0x19 returned 0 after 35 usecs
- calling tunnel4_init+0x0/0x6b @ 1
- initcall tunnel4_init+0x0/0x6b returned 0 after 0 usecs
- calling cubictcp_register+0x0/0x59 @ 1
- TCP: cubic registered
- initcall cubictcp_register+0x0/0x59 returned 0 after 2 usecs
- calling inet6_init+0x0/0x298 @ 1
- NET: Registered protocol family 10
- initcall inet6_init+0x0/0x298 returned 0 after 903 usecs
- calling ah6_init+0x0/0x76 @ 1
- initcall ah6_init+0x0/0x76 returned 0 after 0 usecs
- calling esp6_init+0x0/0x76 @ 1
- initcall esp6_init+0x0/0x76 returned 0 after 0 usecs
- calling xfrm6_transport_init+0x0/0x17 @ 1
- initcall xfrm6_transport_init+0x0/0x17 returned 0 after 0 usecs
- calling xfrm6_mode_tunnel_init+0x0/0x17 @ 1
- initcall xfrm6_mode_tunnel_init+0x0/0x17 returned 0 after 0 usecs
- calling xfrm6_beet_init+0x0/0x17 @ 1
- initcall xfrm6_beet_init+0x0/0x17 returned 0 after 0 usecs
- calling sit_init+0x0/0x89 @ 1
- sit: IPv6 over IPv4 tunneling driver
- initcall sit_init+0x0/0x89 returned 0 after 364 usecs
- calling packet_init+0x0/0x42 @ 1
- NET: Registered protocol family 17
- initcall packet_init+0x0/0x42 returned 0 after 5 usecs
- calling init_rpcsec_gss+0x0/0x68 @ 1
- initcall init_rpcsec_gss+0x0/0x68 returned 0 after 14 usecs
- calling init_dns_resolver+0x0/0xed @ 1
- Key type dns_resolver registered
- initcall init_dns_resolver+0x0/0xed returned 0 after 9 usecs
- calling mcheck_init_device+0x0/0x237 @ 1
- initcall mcheck_init_device+0x0/0x237 returned 0 after 1428 usecs
- calling hpet_insert_resource+0x0/0x24 @ 1
- initcall hpet_insert_resource+0x0/0x24 returned 0 after 1 usecs
- calling update_mp_table+0x0/0x439 @ 1
- initcall update_mp_table+0x0/0x439 returned 0 after 0 usecs
- calling lapic_insert_resource+0x0/0x3f @ 1
- initcall lapic_insert_resource+0x0/0x3f returned 0 after 0 usecs
- calling io_apic_bug_finalize+0x0/0x1b @ 1
- initcall io_apic_bug_finalize+0x0/0x1b returned 0 after 0 usecs
- calling print_ICs+0x0/0x424 @ 1
- initcall print_ICs+0x0/0x424 returned 0 after 0 usecs
- calling check_early_ioremap_leak+0x0/0x50 @ 1
- initcall check_early_ioremap_leak+0x0/0x50 returned 0 after 0 usecs
- calling init_oops_id+0x0/0x32 @ 1
- initcall init_oops_id+0x0/0x32 returned 0 after 3 usecs
- calling printk_late_init+0x0/0x48 @ 1
- initcall printk_late_init+0x0/0x48 returned 0 after 0 usecs
- calling pm_qos_power_init+0x0/0x63 @ 1
- initcall pm_qos_power_init+0x0/0x63 returned 0 after 223 usecs
- calling max_swapfiles_check+0x0/0x8 @ 1
- initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs
- calling prandom_reseed+0x0/0x97 @ 1
- initcall prandom_reseed+0x0/0x97 returned 0 after 85 usecs
- calling pci_resource_alignment_sysfs_init+0x0/0x22 @ 1
- initcall pci_resource_alignment_sysfs_init+0x0/0x22 returned 0 after 1 usecs
- calling pci_sysfs_init+0x0/0x4b @ 1
- initcall pci_sysfs_init+0x0/0x4b returned 0 after 800 usecs
- calling random_int_secret_init+0x0/0x19 @ 1
- initcall random_int_secret_init+0x0/0x19 returned 0 after 17 usecs
- calling deferred_probe_initcall+0x0/0x61 @ 1
- initcall deferred_probe_initcall+0x0/0x61 returned 0 after 50 usecs
- calling acpi_cpufreq_init+0x0/0x18e @ 1
- initcall acpi_cpufreq_init+0x0/0x18e returned -19 after 35 usecs
- calling pci_mmcfg_late_insert_resources+0x0/0x4b @ 1
- initcall pci_mmcfg_late_insert_resources+0x0/0x4b returned 0 after 1 usecs
- calling tcp_congestion_default+0x0/0x12 @ 1
- initcall tcp_congestion_default+0x0/0x12 returned 0 after 0 usecs
- calling tcp_fastopen_init+0x0/0x28 @ 1
- initcall tcp_fastopen_init+0x0/0x28 returned 0 after 10 usecs
- calling alsa_sound_last_init+0x0/0x61 @ 1
- ALSA device list:
- No soundcards found.
- initcall alsa_sound_last_init+0x0/0x61 returned 0 after 2 usecs
- calling initialize_hashrnd+0x0/0x19 @ 1
- initcall initialize_hashrnd+0x0/0x19 returned 0 after 3 usecs
- ata5: SATA link down (SStatus 0 SControl 300)
- async_waiting @ 955
- ata4: SATA link down (SStatus 0 SControl 300)
- async_waiting @ 954
- ata3: SATA link down (SStatus 0 SControl 300)
- async_waiting @ 953
- ata2: SATA link down (SStatus 0 SControl 300)
- async_waiting @ 72
- ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- ata6.00: ATA-8: 8GB NANDrive, D A411G2, max UDMA/133
- ata6.00: 15649200 sectors, multi 0: LBA48
- ata6.00: configured for UDMA/133
- async_waiting @ 956
- async_waiting @ 1
- ata1: SATA link down (SStatus 0 SControl 300)
- async_waiting @ 6
- async_continuing @ 6 after 0 usec
- initcall 1_async_port_probe+0x0/0x4a returned 0 after 306920 usecs
- async_continuing @ 72 after 1391387 usec
- initcall 2_async_port_probe+0x0/0x4a returned 0 after 1692479 usecs
- async_continuing @ 953 after 1401447 usec
- initcall 3_async_port_probe+0x0/0x4a returned 0 after 1702559 usecs
- async_continuing @ 954 after 1411593 usec
- initcall 4_async_port_probe+0x0/0x4a returned 0 after 1712634 usecs
- async_continuing @ 955 after 1421724 usec
- initcall 5_async_port_probe+0x0/0x4a returned 0 after 1722700 usecs
- async_continuing @ 956 after 1431100 usec
- scsi 5:0:0:0: Direct-Access ATA 8GB NANDrive D A4 PQ: 0 ANSI: 5
- calling 7_sd_probe_async+0x0/0x1b8 @ 955
- initcall 6_async_port_probe+0x0/0x4a returned 0 after 1740315 usecs
- sd 5:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB)
- sd 5:0:0:0: [sda] Write Protect is off
- sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
- sd 5:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- sda: sda1 sda2
- sd 5:0:0:0: [sda] Attached SCSI disk
- initcall 7_sd_probe_async+0x0/0x1b8 returned 0 after 29505 usecs
- async_continuing @ 1 after 408143 usec
- Freeing unused kernel memory: 748k freed
- Write protecting the kernel read-only data: 8192k
- Freeing unused kernel memory: 1316k freed
- Freeing unused kernel memory: 192k freed
- X-ES ramfs; http://www.xes-inc.com
- * Root filesystem device: ramfs
- * Starting ramfs init
- starting pid 1218, tty '': '/etc/init.d/rcS'
- [ Booting to X-ES embedded RAM filesystem ]
- (none)
- Starting telnet server..
- This is (none).O (Linux x86_64 3.10.6-xes_r5-dirty) 01:15:12
Add Comment
Please, Sign In to add comment