Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [2016-12-04 19:30:25] [Output] : ★ Nial Benson reaches for the lift controls pressing down on the button to lift the car up.
- [2016-12-04 19:30:57] [Output] : ★ Nial Benson stops the lift and slides inner rails under the chasis.
- [2016-12-04 19:31:14] [Output] : ★ Nial Benson locks the inner rails in place and leans towards the lift.
- [2016-12-04 19:31:22] [Output] : ★ -controls. ((Nial Benson))
- [2016-12-04 19:31:45] [Output] : ★ Nial Benson presses on the button to fully lower the lift.
- [2016-12-04 19:31:57] [Output] : ★ the car would sit in place wheels free. ((Nial Benson))
- [2016-12-04 19:32:31] [Output] : ★ Nial Benson walks towards the workbench picking up a toolbox and taking it back to the car.
- [2016-12-04 19:33:08] [Output] : ★ Nial Benson places the toolbox down before opening it up and taking out a lug nut gun.
- [2016-12-04 19:33:20] [Output] : ★ Nial Benson slides the lug nut gun into the first lug nut hole.
- [2016-12-04 19:33:38] [Output] : ★ Nial Benson presses down on the button to activate it and loosen the lug nut.
- [2016-12-04 19:33:55] [Output] : ★ Nial Benson removes the lug nut gun and the lug nut itself shortly after.
- [2016-12-04 19:34:26] [Output] : ★ Nial Benson does this procedure for the remaining four lug nuts.
- [2016-12-04 19:34:49] [Output] : ★ Nial Benson places the lug nut gun ontop of the hood.
- [2016-12-04 19:35:07] [Output] : ★ Nial Benson grabs the wheel with both hands , pulling it towards himself off the hub.
- [2016-12-04 19:35:24] [Output] : ★ Nial Benson places the wheel down onto the ground.
- [2016-12-04 19:36:12] [Output] : ★ Nial Benson leans towards the toolbox grabbing a ratchet.
- [2016-12-04 19:37:41] [Output] : ★ Nial Benson leans towards the brake caliper , locating the nuts of the caliper.
- [2016-12-04 19:37:52] [Output] : ★ Nial Benson starts to remove the nuts one by one.
- [2016-12-04 19:38:14] [Output] : ★ Nial Benson pulls the brake fluid hose from the caliper.
- [2016-12-04 19:38:28] [Output] : ★ Nial Benson grabs the brake caliper with his right hand before taking it off and placing it-
- [2016-12-04 19:38:35] [Output] : ★ -onto the ground. ((Nial Benson))
- [2016-12-04 19:39:09] [Output] : ★ Nial Benson walks to the workbench picking up a airgun.
- [2016-12-04 19:39:33] [Output] : ★ Nial Benson walks back to the car , pushing it onto the brake rotor nut.
- [2016-12-04 19:39:44] [Output] : ★ Nial Benson pulls the trigger to activate it.
- [2016-12-04 19:40:05] [Output] : ★ Nial Benson placs the airgun onto the hood before looking back at the brake rotor.
- [2016-12-04 19:40:32] [Output] : ★ Nial Benson grabs the brake rotor with both hands as he starts to pull it forcefully.
- [2016-12-04 19:40:39] [Output] : ★ Nial Benson places it onto the ground.
- [2016-12-04 19:41:11] [Output] : ★ Nial Benson grabs the box of new brake rotors and opens it.
- [2016-12-04 19:41:31] [Output] : ★ Nial Benson takes out one of the slotted brake rotors , pushing it back into its place.
- [2016-12-04 19:42:02] [Output] : ★ Nial Benson grabs the airgun off the hood, pushing the socket onto the nut, pulling the trigger.
- [2016-12-04 19:42:26] [Output] : ★ causing the nut to tighten. ((Nial Benson))
- [2016-12-04 19:43:13] [Output] : ★ Nial Benson grabs the box of brakepads and calipers, pulling them towards himself.
- [2016-12-04 19:43:30] [Output] : ★ Nial Benson opens up the boxes and takes out a caliper along with two new brakepads.
- [2016-12-04 19:44:06] [Output] : ★ Nial Benson pushes the two brake pads into the new caliper.
- [2016-12-04 19:44:43] [Output] : ★ Nial Benson starts to place the caliper onto the brake rotor, pushing it into its place.
- [2016-12-04 19:45:11] [Output] : ★ Nial Benson grabs a C-clamp from the workbench , taking it back to the car.
- [2016-12-04 19:45:47] [Output] : ★ Nial Benson places the C-clamp over the caliper , twisting the knob , causing it to-
- [2016-12-04 19:46:00] [Output] : ★ -pressure the brake caliper. ((Nial Benson))
- [2016-12-04 19:46:37] [Output] : ★ Nial Benson untightens the c-clamp before pulling it removing it and placing it onto the ground.
- [2016-12-04 19:47:07] [Output] : ★ Nial Benson grabs the hanging brake fluid hose , pushing it into place.
- [2016-12-04 19:47:29] [Output] : ★ Nial Benson grabs the caliper nuts slotting them into place.
- [2016-12-04 19:49:06] [Output] : ★ Nial Benson grabs a ratchet and starts to tighten all the nuts.
- [2016-12-04 19:49:19] [Output] : ★ Nial Benson repeats this for the other three wheels.
- [2016-12-04 19:50:40] [Output] : ★ Nial Benson starts to take the two bolts off the brake line using the ratchet.
- [2016-12-04 19:51:51] [Output] : ★ Nial Benson starts to unbolt the lower hardware from the strut mount.
- [2016-12-04 19:52:07] [Output] : ★ Nial Benson walks towards the drivers side door, opening it.
- [2016-12-04 19:52:20] [Output] : ★ Nial Benson leans inside towards the hood release latch, pulling it.
- [2016-12-04 19:52:46] [Output] : ★ Nial Benson walks towards the front of the car , placing his hands under the hood, pulling-
- [2016-12-04 19:52:54] [Output] : ★ -the latch and lifting it up all the way. ((Nial Benson))
- [2016-12-04 19:53:02] [Output] : ★ Nial Benson supports the hood in its place using the rod.
- [2016-12-04 19:53:27] [Output] : ★ Nial Benson leans into the engine bay with his ratchet, looking at the left side.
- [2016-12-04 19:54:17] [Output] : ★ there would be three bolts holding the strut mount in place. ((Nial Benson))
- [2016-12-04 19:54:29] [Output] : ★ Nial Benson starts to untigthen them using the ratchet.
- [2016-12-04 19:54:36] [Output] : ★ the first nut would untighten. ((Nial Benson))
- [2016-12-04 19:54:42] [Output] : ★ the second nut would untighten. ((Nial Benson))
- [2016-12-04 19:54:49] [Output] : ★ the third nut would untighten. ((Nial Benson))
- [2016-12-04 19:55:09] [Output] : ★ Nial Benson leans out of the engine bay and walks back towards the front left wheel.
- [2016-12-04 19:55:36] [Output] : ★ Nial Benson extends his hands grabbing the factory strut.
- [2016-12-04 19:55:44] [Output] : ★ Nial Benson starts to wiggle it a bit before fully removing it.
- [2016-12-04 19:56:07] [Output] : ★ Nial Benson tosses it onto the ground before pulling the new coilover out of a box.
- [2016-12-04 19:56:15] [Output] : ★ Nial Benson starts to slowly slide it into place.
- [2016-12-04 19:56:49] [Output] : ★ Nial Benson leans back into the engine bay slotting the three bolts into the top mount.
- [2016-12-04 19:57:01] [Output] : ★ Nial Benson starts to tighten all three using his ratchet.
- [2016-12-04 19:57:35] [Output] : ★ Nial Benson crouches down towards the front left side.
- [2016-12-04 19:57:50] [Output] : ★ Nial Benson starts to bolt up the lower hardware to the new coilover.
- [2016-12-04 19:58:11] [Output] : ★ Nial Benson tightens the two bolts to hold the brake line to the strut.
- [2016-12-04 19:58:37] [Output] : ★ Nial Benson repeats this to install the coilover on the front right side.
- [2016-12-04 19:59:01] [Output] : ★ Nial Benson walks towards the rear left wheel.
- [2016-12-04 19:59:39] [Output] : ★ Nial Benson uses his rachet to unbolt the lower hardware off the factory strut-
- [2016-12-04 20:00:04] [Output] : ★ -along with other suspension components in the way. ((Nial Benson))
- [2016-12-04 20:00:40] [Output] : ★ Nial Benson walks up to the trunk of car placing the key into the lock.
- [2016-12-04 20:01:02] [Output] : ★ Nial Benson twists the key to unlock it, lifting the trunk up.
- [2016-12-04 20:01:10] [Output] : ★ Nial Benson leans inside towards the left side.
- [2016-12-04 20:01:32] [Output] : ★ Nial Benson uses a screwdriver to remove a trim piece.
- [2016-12-04 20:01:51] [Output] : ★ the top mount of the strut would now be visible being held in place by three bolts. ((Nial Benson))
- [2016-12-04 20:02:03] [Output] : ★ Nial Benson uses the ratchet to untighten all three.
- [2016-12-04 20:02:12] [Output] : ★ the first would untighten. ((Nial Benson))
- [2016-12-04 20:02:21] [Output] : ★ the second would untighten. ((Nial Benson))
- [2016-12-04 20:02:29] [Output] : ★ the third one would untighten. ((Nial Benson))
- [2016-12-04 20:02:37] [Output] : ★ Nial Benson goes back to the rear left wheel.
- [2016-12-04 20:03:06] [Output] : ★ Nial Benson starts to push down on the lower control arm whilst wiggling the strut.
- [2016-12-04 20:03:20] [Output] : ★ Nial Benson starts to pull out the strut whilst being careful of any brake lines in the way.
- [2016-12-04 20:03:36] [Output] : ★ Nial Benson throws the strut onto the ground before taking out a new coilover from the box.
- [2016-12-04 20:03:53] [Output] : ★ Nial Benson starts to slot the new coilover into the place.
- [2016-12-04 20:04:09] [Output] : ★ Nial Benson walks back to the trunk leaning in and tighten the three bolts to the top mount.
- [2016-12-04 20:04:21] [Output] : ★ Nial Benson walks back to the wheel.
- [2016-12-04 20:04:46] [Output] : ★ Nial Benson starts to bolt the lower control arm and hardware followed by other suspension components.
- [2016-12-04 20:05:10] [Output] : ★ Nial Benson repeats this to install the coilovers on the rear right side.
- [2016-12-04 20:07:34] [Output] : ★ Nial Benson grabs a wheel from the ground and carries it to the tire changing machine.
- [2016-12-04 20:07:50] [Output] : ★ Nial Benson places the wheel onto the tire changing machine.
- [2016-12-04 20:08:16] [Output] : ★ Nial Benson reaches for the stem valve cap, twisting it off.
- [2016-12-04 20:08:45] [Output] : ★ Nial Benson applies pressure onto the stem valve with a screwdriver, letting out all the air.
- [2016-12-04 20:08:59] [Output] : ★ the tire would now be flat. ((Nial Benson))
- [2016-12-04 20:09:32] [Output] : ★ Nial Benson grabs the wheel with both hands , attaching it to the tire changing machine-
- [2016-12-04 20:09:56] [Output] : ★ - in a way so it removes the tire with ease and dosent damage the rim. ((Nial Benson))
- [2016-12-04 20:10:44] [Output] : ★ Nial Benson activates the machine to remove the tire.
- [2016-12-04 20:10:59] [Output] : ★ the tire would now be removed from the rim. ((Nial Benson))
- [2016-12-04 20:11:04] [Output] : ★ Nial Benson stops the machine.
- [2016-12-04 20:11:25] [Output] : ★ Nial Benson takes the tire off with both his hands , carrying it to the other end of the garage .
- [2016-12-04 20:12:04] [Output] : ★ Nial Benson grabs a Toyo Proxes R888R tire and carries it to the tire changing machine.
- [2016-12-04 20:12:20] [Output] : ★ Nial Benson places the tire above the rim.
- [2016-12-04 20:12:43] [Output] : ★ Nial Benson sets up the tire in a way that it would be applied without any damage.
- [2016-12-04 20:13:11] [Output] : ★ Nial Benson extends his hand to the button, activating the machine.
- [2016-12-04 20:13:31] [Output] : ★ the tire would slowly be going onto the rim ((Nial Benson))
- [2016-12-04 20:13:40] [Output] : ★ the tire would shortly be applied to the rim. ((Nial Benson))
- [2016-12-04 20:13:49] [Output] : ★ Nial Benson presses the button to stop the machine.
- [2016-12-04 20:14:16] [Output] : ★ Nial Benson grabs the wheel with both hands and takes it to the air hose.
- [2016-12-04 20:14:40] [Output] : ★ Nial Benson grabs the air hose and places it onto the stem valve filling it with air.
- [2016-12-04 20:14:51] [Output] : ★ 0.5 bar pressure. ((Nial Benson))
- [2016-12-04 20:14:54] [Output] : ★ 1 bar pressure, ((Nial Benson))
- [2016-12-04 20:15:01] [Output] : ★ 1.5 bar ((Nial Benson))
- [2016-12-04 20:15:06] [Output] : ★ 2.2 bar ((Nial Benson))
- [2016-12-04 20:15:26] [Output] : ★ Nial Benson pulls out the hose of the stem valve and places the cap back over it.
- [2016-12-04 20:16:09] [Output] : ★ Nial Benson carries the wheel over to the wheel calibration/balancer machine.
- [2016-12-04 20:16:36] [Output] : ★ Nial Benson proceeds to put the wheel on the metal rod , pushing it all the way in.
- [2016-12-04 20:16:52] [Output] : ★ Nial Benson starts to secure the wheel.
- [2016-12-04 20:17:10] [Output] : ★ Nial Benson enters the tire details into the machine.
- [2016-12-04 20:17:38] [Output] : ★ Nial Benson takes a few metal weights with his right hand , clipping them onto the wheel.
- [2016-12-04 20:18:03] [Output] : ★ Nial Benson presses the button to activate the machine whilst pushing the wheel with medium force.
- [2016-12-04 20:19:25] [Output] : ★ the machine would be calculating the results. ((Nial Benson))
- [2016-12-04 20:20:03] [Output] : ★ Nial Benson unclips the metal weights.
- [2016-12-04 20:21:16] [Output] : ★ Nial Benson stops the machine and grabs the wheel.
- [2016-12-04 20:21:39] [Output] : ★ Nial Benson proceeds to take off the wheel with both his hands , carrying it to the front left side.
- [2016-12-04 20:21:45] [Output] : ★ - of the car. ((Nial Benson))
- [2016-12-04 20:22:03] [Output] : ★ Nial Benson crouches down and starts to slide the wheel onto the hub.
- [2016-12-04 20:22:23] [Output] : ★ Nial Benson picks up the lug nut gun from the hood and slides it into one of the lug nut holes.
- [2016-12-04 20:22:39] [Output] : ★ - along with a lug nut. ((Nial Benson))
- [2016-12-04 20:23:03] [Output] : ★ Nial Benson presses down on the button activating it to tighten the lug nut.
- [2016-12-04 20:23:36] [Output] : ★ Nial Benson pulls the lug nut gun out of the hole once the lug nut has been fully tightened.
- [2016-12-04 20:23:52] [Output] : ★ Nial Benson does the same step with the remaining four lug nuts.
- [2016-12-04 20:24:06] [Output] : ★ Nial Benson places the lug nut gun back onto the hood.
- [2016-12-04 20:24:29] [Output] : ★ Nial Benson starts to spin the wheel to make sure it is safe to drive.
- [2016-12-04 20:24:51] [Output] : ★ Nial Benson repeats this process for the remaining three wheels with new tires.
- [2016-12-04 20:25:21] [Output] : ★ Nial Benson extends his hand towards lift controls , pressing the button to make the lift go up-
- [2016-12-04 20:25:28] [Output] : ★ -until it makes contact with the cars wheels. ((Nial Benson))
- [2016-12-04 20:25:51] [Output] : ★ Nial Benson starts to loosen up the inner rails under the cars chasis.
- [2016-12-04 20:26:02] [Output] : ★ Nial Benson slides the inner rails out and goes back towards the lift controls.
- [2016-12-04 20:26:15] [Output] : ★ Nial Benson presses down on the button to lower the car fully on the ground.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement