API tools faq
paste
Guest User

reboot

a guest
Jul 26th, 2013
77
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 48.12 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Linux version 3.4.0-faux123-mako-custom-jb43 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #162 SMP PREEMPT Fri Jul 26 10:27:46 CDT 2013
  4. [ 0.000000] CPU: ARMv7 Processor [510f06f2] revision 2 (ARMv7), cr=10c5387d
  5. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  6. [ 0.000000] Machine: QCT APQ8064 MAKO
  7. [ 0.000000] Truncating memory at 0xc0000000 to fit in 32-bit physical address space
  8. [ 0.000000] memory pool 3 (start fe9ff000 size 1600000) initialized
  9. [ 0.000000] Initialized persistent memory from 88700000-887fffff
  10. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  11. [ 0.000000] smem_find(137, 80): wrong size 72
  12. [ 0.000000] socinfo_init: v6, id=109, ver=1.1, raw_id=1817, raw_ver=1817, hw_plat=8, hw_plat_ver=65536
  13. [ 0.000000] accessory_chip=0 hw_plat_subtype=1
  14. [ 0.000000] allocating 21626880 bytes at c2264000 (82464000 physical) for fb
  15. [ 0.000000] PERCPU: Embedded 10 pages/cpu @c3707000 s16576 r8192 d16192 u40960
  16. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 488963
  17. [ 0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.hardware=mako lpj=67677 uart_console=enable lcd_maker_id=primary lge.hreset=off lge.reset=rst_none gpt=enable lge.kcal=0|0|0|x lge.rev=rev_11 mdm_force_dump_enabled androidboot.emmc=true androidboot.serialno=04cc3c2dd948efcc androidboot.bootloader=MAKOZ10o androidboot.baseband=mdm bootreason=hw_reset_or_poweron
  18. [ 0.000000] UART CONSOLE : enable
  19. [ 0.000000] kcal is 0|0|0|x
  20. [ 0.000000] kcal not calibrated yet : 120
  21. [ 0.000000] set to default : 255
  22. [ 0.000000] BOARD : LGE input rev_11
  23. [ 0.000000] BOARD : LGE matched rev_11
  24. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  25. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  26. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  27. [ 0.000000] Memory: 134MB 74MB 7MB 1MB 253MB 1456MB = 1925MB total
  28. [ 0.000000] Memory: 1914172k/1997116k available, 58048k reserved, 1286140K highmem
  29. [ 0.000000] Virtual kernel memory layout:
  30. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  31. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  32. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  33. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  34. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  35. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  36. [ 0.000000] .text : 0xc0008000 - 0xc0cd4afc (13107 kB)
  37. [ 0.000000] .init : 0xc0d00000 - 0xc0e040c0 (1041 kB)
  38. [ 0.000000] .data : 0xc0e06000 - 0xc0efa920 ( 979 kB)
  39. [ 0.000000] .bss : 0xc0efa944 - 0xc11e4dd4 (2986 kB)
  40. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  41. [ 0.000000] Preemptible hierarchical RCU implementation.
  42. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  43. [ 0.000000] NR_IRQS:921
  44. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30520ns, wraps every 131084001ms
  45. [ 0.000000] Console: colour dummy device 80x30
  46. [ 0.000183] Calibrating delay loop (skipped) preset value.. 13.53 BogoMIPS (lpj=67677)
  47. [ 0.000213] pid_max: default: 32768 minimum: 301
  48. [ 0.000427] Security Framework initialized
  49. [ 0.000457] SELinux: Initializing.
  50. [ 0.000610] Mount-cache hash table entries: 512
  51. [ 0.001861] Initializing cgroup subsys debug
  52. [ 0.001892] Initializing cgroup subsys cpuacct
  53. [ 0.001892] Initializing cgroup subsys freezer
  54. [ 0.001922] Initializing cgroup subsys bfqio
  55. [ 0.002014] CPU: Testing write buffer coherency: ok
  56. [ 0.002319] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  57. [ 0.002319] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
  58. [ 0.002411] Setting up static identity map for 0x80a5a4e8 - 0x80a5a570
  59. [ 0.006683] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  60. [ 0.009491] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  61. [ 0.012330] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  62. [ 0.012482] Brought up 4 CPUs
  63. [ 0.012482] SMP: Total of 4 processors activated (54.14 BogoMIPS).
  64. [ 0.027224] topology: registering cpufreq notifiers for scale-invariant CPU Power
  65. [ 0.028292] dummy:
  66. [ 0.028689] NET: Registered protocol family 16
  67. [ 0.029757] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  68. [ 0.032534] meminfo_init: smem ram ptable found: ver: 0 len: 6
  69. [ 0.032565] Found 2 memory banks grouped into 16 memory regions
  70. [ 0.032778] gpiochip_add: registered GPIOs 0 to 151 on device: msmgpio
  71. [ 0.033633] smem_find(137, 80): wrong size 72
  72. [ 0.033663] socinfo_init: v6, id=109, ver=1.1, raw_id=1817, raw_ver=1817, hw_plat=8, hw_plat_ver=65536
  73. [ 0.033663] accessory_chip=0 hw_plat_subtype=1
  74. [ 0.033694] msm_rpm_init: RPM firmware 3.0.16842886
  75. [ 0.053685] msm_rpm_get_status(): Status id 433 not defined for target
  76. [ 0.053685] msm_rpm_get_status(): Status id 433 not defined for target
  77. [ 0.053715] msm_rpm_get_status(): Status id 433 not defined for target
  78. [ 0.053715] msm_rpm_get_status(): Status id 433 not defined for target
  79. [ 0.053715] msm_rpm_get_status(): Status id 433 not defined for target
  80. [ 0.053746] msm_rpm_get_status(): Status id 433 not defined for target
  81. [ 0.053746] msm_rpm_get_status(): Status id 433 not defined for target
  82. [ 0.053746] msm_rpm_get_status(): Status id 433 not defined for target
  83. [ 0.071600] pm8921_probe: PMIC revision 1: F4
  84. [ 0.071600] pm8921_probe: PMIC revision 2: 06
  85. [ 0.071631] pm8921_probe: PMIC version: PM8921 rev 3.0
  86. [ 0.071631] pm8921_probe: PMIC Restart Reason: Triggered from RTC (real time clock)
  87. [ 0.072730] gpiochip_add: registered GPIOs 152 to 195 on device: pm-gpio
  88. [ 0.073248] pm_gpio_probe: OK: base=152, ngpio=44
  89. [ 0.073554] gpiochip_add: registered GPIOs 196 to 207 on device: pm8xxx-mpp
  90. [ 0.073615] pm8xxx_mpp_probe: OK: base=196, ngpio=12
  91. [ 0.075721] pm8821_probe: PMIC revision 1: PM8821 rev F3
  92. [ 0.075751] pm8821_probe: PMIC revision 2: PM8821 rev 0B
  93. [ 0.075751] pm8821_probe: PMIC version: PM8821 ver 2.1
  94. [ 0.076331] gpiochip_add: registered GPIOs 208 to 211 on device: pm8xxx-mpp
  95. [ 0.076361] pm8xxx_mpp_probe: OK: base=208, ngpio=4
  96. [ 0.076911] gpio_vreg_probe: id=86, name=ext_dsv_load, gpio=86, gpio_label=ext_dsv_load_en
  97. [ 0.078223] saw_probe: id=0, name=8921_s5
  98. [ 0.078559] saw_probe: id=1, name=8921_s6
  99. [ 0.078925] saw_probe: id=2, name=8821_s0
  100. [ 0.079291] saw_probe: id=3, name=8821_s1
  101. [ 0.088448] persistent_ram: uncorrectable error in header
  102. [ 0.088448] persistent_ram: no valid data in buffer (sig = 0x3f3f3f3f)
  103. [ 0.101327] console [ram-1] enabled
  104. [ 0.102823] [NORMAL-DEBUG] apq8064_device_uart_gsbi4.id : 0
  105. [ 0.102914] [DEBUG] uart_enable : 1
  106. [ 0.105539] [Touch D] apq8064_init_input: NOT DCM KDDI, reg synaptics driver
  107. [ 0.106821] ------------[ cut here ]------------
  108. [ 0.107034] WARNING: at arch/arm/mach-msm/subsystem_restart.c:617 subsys_restart_init+0xd8/0x108()
  109. [ 0.107126] Modules linked in:
  110. [ 0.107401] [<c0013ef8>] (unwind_backtrace+0x0/0xe0) from [<c006e438>] (warn_slowpath_common+0x4c/0x64)
  111. [ 0.107523] [<c006e438>] (warn_slowpath_common+0x4c/0x64) from [<c006e468>] (warn_slowpath_null+0x18/0x1c)
  112. [ 0.107706] [<c006e468>] (warn_slowpath_null+0x18/0x1c) from [<c0d0b288>] (subsys_restart_init+0xd8/0x108)
  113. [ 0.107889] [<c0d0b288>] (subsys_restart_init+0xd8/0x108) from [<c0008724>] (do_one_initcall+0x90/0x160)
  114. [ 0.108072] [<c0008724>] (do_one_initcall+0x90/0x160) from [<c0d00a0c>] (kernel_init+0xe8/0x1a4)
  115. [ 0.108286] [<c0d00a0c>] (kernel_init+0xe8/0x1a4) from [<c000ec80>] (kernel_thread_exit+0x0/0x8)
  116. [ 0.108469] ---[ end trace 6842d4d8c289833c ]---
  117. [ 0.110758] sps:BAM 0x12244000 enabled: ver:0x5, number of pipes:20
  118. [ 0.110880] sps:BAM 0x12244000 is registered.
  119. [ 0.111551] sps:sps is ready.
  120. [ 0.144422] bio: create slab <bio-0> at 0
  121. [ 0.145185] ION heap vmalloc created
  122. [ 0.145368] ION heap mm created at a0000000 with size 3800000
  123. [ 0.145490] ION heap mm_fw created at 9fe00000 with size 1e0000
  124. [ 0.145673] ION heap mfc created at a3800000 with size 2000
  125. [ 0.145795] ION heap iommu created
  126. [ 0.146009] ION heap qsecom created at fea07000 with size 780000
  127. [ 0.146162] ION heap audio created at ff187000 with size 4cf000
  128. [ 0.147535] pm8xxx_pwm_probe: OK
  129. [ 0.148267] SCSI subsystem initialized
  130. [ 0.148664] sps:BAM 0x28084000 enabled: ver:0x12, number of pipes:31
  131. [ 0.148847] sps:BAM 0x28084000 is registered.
  132. [ 0.149763] usbcore: registered new interface driver usbfs
  133. [ 0.150129] usbcore: registered new interface driver hub
  134. [ 0.150343] usbcore: registered new device driver usb
  135. [ 0.150953] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-pwrkey/input/input0
  136. [ 0.151106] [sweep2wake]: set device pmic8xxx_pwrkey
  137. [ 0.151991] Linux media interface: v0.10
  138. [ 0.152144] Linux video capture interface: v2.00
  139. [ 0.154372] msm_iommu_dev: device vpe mapped at f0400000, with 2 ctx banks
  140. [ 0.154616] msm_iommu_dev: device mdp0 mapped at f0600000, with 2 ctx banks
  141. [ 0.154890] msm_iommu_dev: device mdp1 mapped at f0800000, with 2 ctx banks
  142. [ 0.155196] msm_iommu_dev: device rot mapped at f0a00000, with 2 ctx banks
  143. [ 0.155440] msm_iommu_dev: device ijpeg mapped at f0c00000, with 2 ctx banks
  144. [ 0.155714] msm_iommu_dev: device vfe mapped at f0e00000, with 2 ctx banks
  145. [ 0.155928] msm_iommu_dev: device vcodec_a mapped at f1000000, with 2 ctx banks
  146. [ 0.156233] msm_iommu_dev: device vcodec_b mapped at f1200000, with 2 ctx banks
  147. [ 0.156538] msm_iommu_dev: device gfx3d mapped at f1400000, with 3 ctx banks
  148. [ 0.156783] msm_iommu_dev: device jpegd mapped at f1600000, with 2 ctx banks
  149. [ 0.157088] msm_iommu_dev: device gfx3d1 mapped at f1800000, with 3 ctx banks
  150. [ 0.157393] msm_iommu_dev: device vcap mapped at f1a00000, with 2 ctx banks
  151. [ 0.157881] msm_iommu_ctx msm_iommu_ctx.2: context vpe_src using bank 0
  152. [ 0.158217] msm_iommu_ctx msm_iommu_ctx.3: context vpe_dst using bank 1
  153. [ 0.158492] msm_iommu_ctx msm_iommu_ctx.4: context mdp_port0_cb0 using bank 0
  154. [ 0.158828] msm_iommu_ctx msm_iommu_ctx.5: context mdp_port0_cb1 using bank 1
  155. [ 0.159163] msm_iommu_ctx msm_iommu_ctx.6: context mdp_port1_cb0 using bank 0
  156. [ 0.159438] msm_iommu_ctx msm_iommu_ctx.7: context mdp_port1_cb1 using bank 1
  157. [ 0.159774] msm_iommu_ctx msm_iommu_ctx.8: context rot_src using bank 0
  158. [ 0.160018] msm_iommu_ctx msm_iommu_ctx.9: context rot_dst using bank 1
  159. [ 0.160354] msm_iommu_ctx msm_iommu_ctx.10: context ijpeg_src using bank 0
  160. [ 0.160659] msm_iommu_ctx msm_iommu_ctx.11: context ijpeg_dst using bank 1
  161. [ 0.160933] msm_iommu_ctx msm_iommu_ctx.12: context vfe_imgwr using bank 0
  162. [ 0.161269] msm_iommu_ctx msm_iommu_ctx.13: context vfe_misc using bank 1
  163. [ 0.161513] msm_iommu_ctx msm_iommu_ctx.14: context vcodec_a_stream using bank 0
  164. [ 0.161910] msm_iommu_ctx msm_iommu_ctx.15: context vcodec_a_mm1 using bank 1
  165. [ 0.162276] msm_iommu_ctx msm_iommu_ctx.16: context vcodec_b_mm2 using bank 0
  166. [ 0.162612] msm_iommu_ctx msm_iommu_ctx.17: context gfx3d_user using bank 0
  167. [ 0.162978] msm_iommu_ctx msm_iommu_ctx.18: context gfx3d_priv using bank 1
  168. [ 0.163314] msm_iommu_ctx msm_iommu_ctx.0: context jpegd_src using bank 0
  169. [ 0.163558] msm_iommu_ctx msm_iommu_ctx.1: context jpegd_dst using bank 1
  170. [ 0.163924] msm_iommu_ctx msm_iommu_ctx.19: context gfx3d1_user using bank 0
  171. [ 0.164230] msm_iommu_ctx msm_iommu_ctx.20: context gfx3d1_priv using bank 1
  172. [ 0.164565] msm_iommu_ctx msm_iommu_ctx.21: context vcap_vc using bank 0
  173. [ 0.164901] msm_iommu_ctx msm_iommu_ctx.22: context vcap_vp using bank 1
  174. [ 0.165084] Advanced Linux Sound Architecture Driver Version 1.0.25.
  175. [ 0.165786] Bluetooth: Core ver 2.16
  176. [ 0.165939] NET: Registered protocol family 31
  177. [ 0.166122] Bluetooth: HCI device and connection manager initialized
  178. [ 0.166213] Bluetooth: HCI socket layer initialized
  179. [ 0.166397] Bluetooth: L2CAP socket layer initialized
  180. [ 0.166732] Bluetooth: SCO socket layer initialized
  181. [ 0.167129] cfg80211: Calling CRDA to update world regulatory domain
  182. [ 0.167343] cfg80211: World regulatory domain updated:
  183. [ 0.167434] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  184. [ 0.167617] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  185. [ 0.167770] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  186. [ 0.167892] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  187. [ 0.167984] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  188. [ 0.168167] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  189. [ 0.168960] earjack debugger probed
  190. [ 0.170090] Switching to clocksource gp_timer
  191. [ 0.206653] NET: Registered protocol family 2
  192. [ 0.207111] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  193. [ 0.207782] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  194. [ 0.209186] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  195. [ 0.210010] TCP: Hash tables configured (established 131072 bind 65536)
  196. [ 0.210102] TCP: reno registered
  197. [ 0.210224] UDP hash table entries: 512 (order: 2, 16384 bytes)
  198. [ 0.210499] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  199. [ 0.210956] NET: Registered protocol family 1
  200. [ 0.211475] Trying to unpack rootfs image as initramfs...
  201. [ 0.236929] Freeing initrd memory: 396K
  202. [ 0.239035] Detected 5 counters on the L2CC PMU.
  203. [ 0.241171] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot
  204. [ 0.243003] pil_riva pil_riva: using secure boot
  205. [ 0.246085] pil_dsps pil_dsps: using secure boot
  206. [ 0.247611] pil_gss pil_gss: using secure boot
  207. [ 0.250114] smd_channel_probe_worker: allocation table not initialized
  208. [ 0.257439] msm_dsps driver version 4.03.
  209. [ 0.259789] NET: Registered protocol family 27
  210. [ 0.264123] lpass_fatal_init: lpass SSR driver init'ed.
  211. [ 0.264611] wcnss_8960: module initialized
  212. [ 0.265160] gss_8064_init: gss fatal driver init'ed.
  213. [ 0.266015] acpuclk-8064 acpuclk-8064: SPEED BIN: 0
  214. [ 0.266290] acpuclk-8064 acpuclk-8064: ACPU PVS: 0
  215. [ 0.269006] acpuclk-8064 acpuclk-8064: CPU0: 15 frequencies supported
  216. [ 0.269189] acpuclk-8064 acpuclk-8064: CPU1: 15 frequencies supported
  217. [ 0.269281] acpuclk-8064 acpuclk-8064: CPU2: 15 frequencies supported
  218. [ 0.269464] acpuclk-8064 acpuclk-8064: CPU3: 15 frequencies supported
  219. [ 0.270105] kcal_ctrl_init
  220. [ 0.270807] persistent_ram: no valid data in buffer (sig = 0x3f3f3f3f)
  221. [ 0.271875] msm_rpm_log_probe: OK
  222. [ 0.274988] mdm_modem_probe: registered mdm id 0
  223. [ 0.275110] mdm_do_first_power_on:id 0: Powering on modem for the first time
  224. [ 0.342743] mdm_pblrdy_change: mdm id 0: pbl ready:1
  225. [ 0.551503] usbcore: registered new interface driver hsic_sysmon
  226. [ 0.552021] audit: initializing netlink socket (disabled)
  227. [ 0.552174] type=2000 audit(0.540:1): initialized
  228. [ 0.553761] highmem bounce pool size: 64 pages
  229. [ 0.564321] NTFS driver 2.1.30 [Flags: R/W].
  230. [ 0.564810] fuse init (API version 7.18)
  231. [ 0.565359] msgmni has been set to 1227
  232. [ 0.570792] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  233. [ 0.571188] io scheduler noop registered
  234. [ 0.571402] io scheduler deadline registered
  235. [ 0.571616] io scheduler row registered
  236. [ 0.572348] io scheduler cfq registered (default)
  237. [ 0.572928] io scheduler bfq registered
  238. [ 0.573172] io scheduler fiops registered
  239. [ 0.573569] io scheduler sio registered
  240. [ 0.574301] xz_dec_test: module loaded
  241. [ 0.574515] xz_dec_test: Create a device node with 'mknod xz_dec_test c 247 0' and write .xz files to it.
  242. [ 0.575675] lm3530 probed
  243. [ 0.580283] mipi_dsi base phy_addr = 0x4700000 virt = 0xf1d00000
  244. [ 0.580894] mmss_sfpb base phy_addr = 0x5700000,virt = 0xf01fa000
  245. [ 0.582328] mipi_lgit_lcd_probe start
  246. [ 0.582542] setting pdata->panel_info.fb_num to 3. type: 8
  247. [ 0.595086] FrameBuffer[0] 768x1280 size=11796480 bytes is registered successfully!
  248. [ 0.595452] load_565rle_image: Can not open /initlogo.rle
  249. [ 0.597344] setting pdata->panel_info.fb_num to 1. type: 7
  250. [ 0.598504] FrameBuffer[1] 1920x1080 size=0 bytes is registered successfully!
  251. [ 0.598840] load_565rle_image: Can not open /initlogo.rle
  252. [ 0.599328] mdp4_dtv_vsync_init: ndx=0
  253. [ 0.599572] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group cf8abc08
  254. [ 0.599786] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Enabled
  255. [ 0.600732] setting pdata->panel_info.fb_num to 1. type: 10
  256. [ 0.601007] Inside writeback_driver_init
  257. [ 0.601464] Inside writeback_probe
  258. [ 0.602227] FrameBuffer[2] 1280x720 size=0 bytes is registered successfully!
  259. [ 0.602563] load_565rle_image: Can not open /initlogo.rle
  260. [ 0.604303]
  261. [ 0.604303] msm_vidc_enc: Inside vid_enc_init()
  262. [ 0.604822]
  263. [ 0.604822] msm_vidc_enc: Inside vid_enc_vcd_init()
  264. [ 0.606195] smux_init: unable to create log context
  265. [ 0.607782] msm_serial_hs module loaded
  266. [ 0.608362] msm_serial_hsl: detected port #0
  267. [ 0.608789] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16340000 (irq = 184) is a MSM
  268. [ 0.609247] msm_serial_hsl: console setup on port #0
  269. [ 0.609980] console [ttyHSL0] enabled
  270. [ 0.610865] msm_serial_hsl: driver initialized
  271. [ 0.613245] msm_rotator_probe: rotator_hw_revision=2
  272. [ 0.617060] diagchar initialized now
  273. [ 0.619044] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
  274. [ 0.636716] brd: module loaded
  275. [ 0.645200] loop: module loaded
  276. [ 0.648222] anx7808 init gpio
  277. [ 0.681031] anx7808 dvdd is already on
  278. [ 0.710697] sp_tx_hardware_poweron: anx7808 power on
  279. [ 0.711551] sp_tx_chip_located: ANX7808 BA is found.
  280. [ 0.712925] sp_tx_vbus_powerdown: 3.3V output disabled
  281. [ 0.770700] sp_tx_hardware_powerdown: anx7808 power down
  282. [ 0.770822] sp_tx_set_sys_state: SP_TX To System State:
  283. [ 0.771005] sp_tx_set_sys_state: STATE_CABLE_PLUG
  284. [ 0.771677] tabla2x-slim tabla2x-slim: Platform data from board file
  285. [ 0.838089] wcd9xxx_check_codec_type: codec is tabla_codec
  286. [ 0.838211] wcd9xxx_check_codec_type: Read codec idbytes & version
  287. [ 0.838211] byte_0[00000002] byte_1[00000000] byte_2[00000000]
  288. [ 0.838211] byte_3[00000001] version = 2
  289. [ 0.839768] i2c-core: driver [tabla-i2c-core] using legacy suspend method
  290. [ 0.839890] i2c-core: driver [tabla-i2c-core] using legacy resume method
  291. [ 0.840866] bcm2079x-i2c 0-a1fa: bcm2079x_probe, probing bcm2079x driver flags = 10
  292. [ 0.841171] bcm2079x-i2c 0-a1fa: requesting IRQ 317
  293. [ 0.841385] bcm2079x-i2c 0-a1fa: bcm2079x_probe, probing bcm2079x driver exited successfully
  294. [ 0.842057] SCSI Media Changer driver v0.25
  295. [ 0.843186] tun: Universal TUN/TAP device driver, 1.6
  296. [ 0.843369] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  297. [ 0.843552] rmnet_init: BAM devices[8]
  298. [ 0.857714] PPP generic driver version 2.4.2
  299. [ 0.858049] PPP BSD Compression module registered
  300. [ 0.858141] PPP Deflate Compression module registered
  301. [ 0.860064] PPP MPPE Compression module registered
  302. [ 0.860186] NET: Registered protocol family 24
  303. [ 0.860338] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  304. [ 0.860521] CSLIP: code copyright 1989 Regents of the University of California.
  305. [ 0.860857] wcnss_wlan probed in built-in mode
  306. [ 0.861925] usbcore: registered new interface driver asix
  307. [ 0.862231] usbcore: registered new interface driver cdc_ether
  308. [ 0.862414] usbcore: registered new interface driver net1080
  309. [ 0.862658] usbcore: registered new interface driver cdc_subset
  310. [ 0.862841] usbcore: registered new interface driver zaurus
  311. [ 0.863421] usbcore: registered new interface driver cdc_ncm
  312. [ 0.863787] msm_otg msm_otg: msm_otg probe
  313. [ 0.864214] msm_otg msm_otg: failed to get phy_clk
  314. [ 0.864550] msm_otg msm_otg: OTG regs = f0304000
  315. [ 0.867968] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  316. [ 0.881336] msm_hsic_host msm_hsic_host: Qualcomm EHCI Host Controller using HSIC
  317. [ 0.881550] msm_hsic_host msm_hsic_host: new USB bus registered, assigned bus number 1
  318. [ 0.910788] msm_hsic_host msm_hsic_host: irq 261, io mem 0x12510000
  319. [ 0.931146] msm_hsic_host msm_hsic_host: USB 2.0 started, EHCI 1.00
  320. [ 0.931603] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  321. [ 0.931695] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  322. [ 0.931878] usb usb1: Product: Qualcomm EHCI Host Controller using HSIC
  323. [ 0.932000] usb usb1: Manufacturer: Linux 3.4.0-faux123-mako-custom-jb43 ehci_hcd
  324. [ 0.932183] usb usb1: SerialNumber: msm_hsic_host
  325. [ 0.932794] hub 1-0:1.0: USB hub found
  326. [ 0.932946] hub 1-0:1.0: 1 port detected
  327. [ 0.934777] usbcore: registered new interface driver cdc_acm
  328. [ 0.934961] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  329. [ 0.935052] Initializing USB Mass Storage driver...
  330. [ 0.935357] usbcore: registered new interface driver usb-storage
  331. [ 0.935449] USB Mass Storage support registered.
  332. [ 0.935724] usbcore: registered new interface driver ums-alauda
  333. [ 0.935907] usbcore: registered new interface driver ums-cypress
  334. [ 0.936151] usbcore: registered new interface driver ums-datafab
  335. [ 0.936334] usbcore: registered new interface driver ums-freecom
  336. [ 0.936578] usbcore: registered new interface driver ums-isd200
  337. [ 0.936761] usbcore: registered new interface driver ums-jumpshot
  338. [ 0.937036] usbcore: registered new interface driver ums-karma
  339. [ 0.937219] usbcore: registered new interface driver ums-onetouch
  340. [ 0.937463] usbcore: registered new interface driver ums-sddr09
  341. [ 0.937738] usbcore: registered new interface driver ums-sddr55
  342. [ 0.937921] usbcore: registered new interface driver ums-usbat
  343. [ 0.938257] usbcore: registered new interface driver usbserial
  344. [ 0.938348] usbserial: USB Serial Driver core
  345. [ 0.938562] usbcore: registered new interface driver qc_csvt
  346. [ 0.938776] USB Serial support registered for qc_csvt
  347. [ 0.938959] usbcore: registered new interface driver usb_ehset_test
  348. [ 0.939233] usbcore: registered new interface driver diag_bridge
  349. [ 0.939722] usbcore: registered new interface driver mdm_bridge
  350. [ 0.940851] usbcore: registered new interface driver ks_bridge
  351. [ 0.941034] ksb_init: init done
  352. [ 0.941400] msm_otg msm_otg: phy_reset: success
  353. [ 0.942285] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
  354. [ 0.942682] mbim_init: initialize 1 instances
  355. [ 0.942896] mbim_init: Initialized 1 ports
  356. [ 0.945551] rndis_qc_init: initialize rndis QC instance
  357. [ 0.946558] android_usb gadget: Mass Storage Function, version: 2009/09/11
  358. [ 0.946955] android_usb gadget: Number of LUNs=1
  359. [ 0.947138] lun0: LUN: removable file: (no medium)
  360. [ 0.948054] android_usb gadget: android_usb ready
  361. [ 0.950648] input: keypad_8064 as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-keypad/input/input1
  362. [ 0.951869] [sweep2wake]: sweep2wake_init done
  363. [ 0.952723] [Touch D]touch enable
  364. [ 1.161025] input: touch_dev as /devices/virtual/input/input2
  365. [ 1.183183] [Touch] common[1] finger[17] flash[52] button[0]
  366. [ 1.184343] [Touch] IC is 7020, H pattern, panel is G2, Firmware: E028.
  367. [ 1.186479] [Touch] fw_rev[0:0] product_id[PLG137:PLG137] force_upgrade[0]
  368. [ 1.186784] [Touch] DO NOT UPDATE 7020 G2 H pattern FW-upgrade is not executed
  369. [ 1.187059] [Touch] Touch driver is initialized
  370. [ 1.188707] using rtc device, pm8xxx_rtc, for alarms
  371. [ 1.188829] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
  372. [ 1.189500] i2c /dev entries driver
  373. [ 1.190111] usbcore: registered new interface driver uvcvideo
  374. [ 1.190233] USB Video Class driver (1.1.1)
  375. [ 1.191698] __jrchoi: msm_sensor_init_module: E
  376. [ 1.219929] msm_eeprom_probe probe_fail
  377. [ 1.220387] msm_server_update_sensor_info mctl_node_name[0] = video1
  378. [ 1.249992] msm_eeprom_probe probe_fail
  379. [ 1.250450] msm_server_update_sensor_info mctl_node_name[1] = video3
  380. [ 1.255089] msm_cam_server_request_irq IRQ Router hw is not present.
  381. [ 1.255913] lm3559_init
  382. [ 1.270929] usb 1-1: new high-speed USB device number 2 using msm_hsic_host
  383. [ 1.282771] pm8xxx_tm_probe: OK
  384. [ 1.283473] pm8xxx_tm_probe: OK
  385. [ 1.284541] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
  386. [ 1.285457] cpuidle: using governor ladder
  387. [ 1.285579] cpuidle: using governor menu
  388. [ 1.286097] mmc0: SDCC Version: 0x0000001a
  389. [ 1.287746] mmc0: bam physical base=0x12402000
  390. [ 1.287837] mmc0: bam virtual base=0xf0330000
  391. [ 1.287959] sps:BAM 0x12402000 is registered.
  392. [ 1.288142] mmc0: BAM device registered. bam_handle=0xeefece00
  393. [ 1.288509] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
  394. [ 1.289119] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130
  395. [ 1.289424] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800
  396. [ 1.289577] mmc0: No card detect facilities available
  397. [ 1.291591] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1
  398. [ 1.291774] mmc0: Controller capabilities: 0x0000039e
  399. [ 1.292018] mmc0: 8 bit data mode enabled
  400. [ 1.292110] mmc0: 4 bit data mode disabled
  401. [ 1.292232] mmc0: polling status mode disabled
  402. [ 1.292415] mmc0: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz
  403. [ 1.292507] mmc0: Slot eject status = 0
  404. [ 1.292781] mmc0: Power save feature enable = 1
  405. [ 1.292873] mmc0: SPS-BAM data transfer mode available
  406. [ 1.293880] usbcore: registered new interface driver usbhid
  407. [ 1.294063] usbhid: USB HID core driver
  408. [ 1.294979] zram: Created 1 device(s) ...
  409. [ 1.295315] zcache: using lzo compressor
  410. [ 1.295864] zcache: cleancache enabled using kernel transcendent memory and compression buddies
  411. [ 1.296047] zcache: frontswap enabled using kernel transcendent memory and zsmalloc
  412. [ 1.296871] ashmem: initialized
  413. [ 1.297176] logger: created 256K log 'log_main'
  414. [ 1.297359] logger: created 256K log 'log_events'
  415. [ 1.297573] logger: created 256K log 'log_radio'
  416. [ 1.297787] logger: created 256K log 'log_system'
  417. [ 1.298794] usbcore: registered new interface driver snd-usb-audio
  418. [ 1.300503] tabla_probe
  419. [ 1.301419] amp_enable: amp enable bypass(2)
  420. [ 1.301541] amp_enable: AMP_EN is set to 0
  421. [ 1.302792] msm_pcm_probe: dev name msm-voip-dsp
  422. [ 1.303250] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback sdline 0 capture sdline 8
  423. [ 1.303433] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback ch_max 0 capture ch_mx 8
  424. [ 1.304837] msm_pcm_probe: dev name msm-pcm-dsp
  425. [ 1.305386] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
  426. [ 1.305966] msm_pcm_probe: dev name msm-lowlatency-pcm-dsp
  427. [ 1.306149] adding pm_qos request in low latency driver
  428. [ 1.306241] done adding pm_qos request in low latency driver
  429. [ 1.307340] msm_compr_probe: dev name msm-compr-dsp
  430. [ 1.308164] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
  431. [ 1.309385] msm8930_audio_init: Not the right machine type
  432. [ 1.309476] msm_audio_init: Not the right machine type
  433. [ 1.309598] msm_audio_init: Not APQ8064 in I2S mode
  434. [ 1.336731] usb 1-1: New USB device found, idVendor=05c6, idProduct=9008
  435. [ 1.336975] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  436. [ 1.337341] usb 1-1: Product: QHSUSB__BULK
  437. [ 1.337524] usb 1-1: Manufacturer: Qualcomm CDMA Technologies MSM
  438. [ 1.425392] mmc0: new HS200 MMC card at address 0001
  439. [ 1.426888] mmcblk0: mmc0:0001 016G92 14.6 GiB
  440. [ 1.433419] Alternate GPT is invalid, using primary GPT.
  441. [ 1.433908] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25
  442. [ 1.443461] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
  443. [ 1.445078] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
  444. [ 1.446299] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
  445. [ 1.447581] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
  446. [ 1.448710] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
  447. [ 1.449992] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
  448. [ 1.451243] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
  449. [ 1.452861] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
  450. [ 1.454356] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
  451. [ 1.456035] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
  452. [ 1.457652] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
  453. [ 1.459240] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok
  454. [ 1.460979] asoc: snd-soc-dummy-dai <-> VOICE_STUB mapping ok
  455. [ 1.462383] asoc: snd-soc-dummy-dai <-> VoLTE mapping ok
  456. [ 1.463604] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
  457. [ 1.465466] asoc: tabla_rx1 <-> msm-dai-q6.16384 mapping ok
  458. [ 1.470593] asoc: tabla_tx1 <-> msm-dai-q6.16385 mapping ok
  459. [ 1.471722] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok
  460. [ 1.472791] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok
  461. [ 1.473950] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok
  462. [ 1.475049] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok
  463. [ 1.476239] asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok
  464. [ 1.477308] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
  465. [ 1.478498] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
  466. [ 1.479597] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok
  467. [ 1.480787] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok
  468. [ 1.482221] asoc: tabla_rx2 <-> msm-dai-stub mapping ok
  469. [ 1.483747] asoc: tabla_tx1 <-> msm-dai-stub mapping ok
  470. [ 1.485182] asoc: msm-stub-rx <-> msm-dai-q6.16386 mapping ok
  471. [ 1.486738] asoc: msm-stub-tx <-> msm-dai-q6.16387 mapping ok
  472. [ 1.487776] asoc: tabla_tx2 <-> msm-dai-q6.16389 mapping ok
  473. [ 1.489363] asoc: tabla_rx3 <-> msm-dai-q6.16388 mapping ok
  474. [ 1.490431] asoc: msm-stub-rx <-> msm-dai-q6.16392 mapping ok
  475. [ 1.491530] asoc: msm-stub-tx <-> msm-dai-q6.16393 mapping ok
  476. [ 1.492324] asoc: tabla_tx3 <-> msm-dai-stub mapping ok
  477. [ 1.493544] asoc: msm-stub-rx <-> msm-dai-q6.16390 mapping ok
  478. [ 1.494307] asoc: msm-stub-tx <-> msm-dai-q6.16391 mapping ok
  479. [ 1.497604] input: apq8064-tabla-snd-card Button Jack as /devices/platform/soc-audio.0/sound/card0/input3
  480. [ 1.498092] input: apq8064-tabla-snd-card Headset Jack as /devices/platform/soc-audio.0/sound/card0/input4
  481. [ 1.502975] oprofile: using arm/armv7-krait
  482. [ 1.503311] u32 classifier
  483. [ 1.503403] Actions configured
  484. [ 1.503525] Netfilter messages via NETLINK v0.30.
  485. [ 1.503799] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  486. [ 1.504745] ctnetlink v0.93: registering with nfnetlink.
  487. [ 1.504990] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  488. [ 1.505081] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  489. [ 1.505569] xt_time: kernel timezone is -0000
  490. [ 1.506180] ip_tables: (C) 2000-2006 Netfilter Core Team
  491. [ 1.506729] arp_tables: (C) 2002 David S. Miller
  492. [ 1.506943] TCP: bic registered
  493. [ 1.507034] TCP: cubic registered
  494. [ 1.507218] TCP: westwood registered
  495. [ 1.507309] TCP: htcp registered
  496. [ 1.507431] Initializing XFRM netlink socket
  497. [ 1.508347] NET: Registered protocol family 10
  498. [ 1.512894] Mobile IPv6
  499. [ 1.513047] ip6_tables: (C) 2000-2006 Netfilter Core Team
  500. [ 1.513505] IPv6 over IPv4 tunneling driver
  501. [ 1.514390] NET: Registered protocol family 17
  502. [ 1.514603] NET: Registered protocol family 15
  503. [ 1.515153] Bluetooth: RFCOMM TTY layer initialized
  504. [ 1.515397] Bluetooth: RFCOMM socket layer initialized
  505. [ 1.515763] Bluetooth: RFCOMM ver 1.11
  506. [ 1.515977] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  507. [ 1.516343] Bluetooth: BNEP filters: protocol multicast
  508. [ 1.516557] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  509. [ 1.517106] L2TP core driver, V2.0
  510. [ 1.517350] PPPoL2TP kernel driver, V2.0
  511. [ 1.517564] Registering the dns_resolver key type
  512. [ 1.519884] VFP support v0.3: implementor 51 architecture 64 part 6f variant 0 rev 2
  513. [ 1.520341] Registering SWP/SWPB emulation handler
  514. [ 1.520738] clock_late_init: Removing enables held for handed-off clocks
  515. [ 1.529864] intelli_plug: version 1.6 by faux123
  516. [ 1.531848] MSM Watchdog Initialized
  517. [ 1.542224] registered taskstats version 1
  518. [ 1.542774] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2013-07-26 21:28:27 UTC (1374874107)
  519. [ 1.543750] read_ocv_trim: program rev reg is 0x33
  520. [ 1.543873] read_ocv_trim: trim reg is 0x4b
  521. [ 1.543934] read_ocv_trim: trim delta is 2
  522. [ 1.544025] pm8921_is_usb_chg_plugged_in: called before init
  523. [ 1.546467] pm8921_is_usb_chg_plugged_in: called before init
  524. [ 1.547718] pm8921_is_usb_chg_plugged_in: called before init
  525. [ 1.547901] ocv_ir_compensation: comp ocv = 3747619, ocv = 3742539, ibatt_ua = 23200, rbatt_mohm = 219
  526. [ 1.548115] calculate_unusable_charge_uah: Using shutdown_iavg_ma = 500 in all samples
  527. [ 1.548176] pm8921_is_batfet_closed: called before init
  528. [ 1.570944] pm8921_is_usb_chg_plugged_in: called before init
  529. [ 1.571036] adjust_soc: ibat_ua = 365300, vbat_uv = 3688739, soc = 37, batt_temp=350
  530. [ 1.573294] pm8921_get_batt_state: called before init
  531. [ 1.573386] pm8921_bms_probe: OK battery_capacity_at_boot=37 volt = 3694920 ocv = 3802000
  532. [ 1.575125] pm8921_is_usb_chg_plugged_in: called before init
  533. [ 1.575278] pm8921_is_batfet_closed: called before init
  534. [ 1.601373] pm8921_is_usb_chg_plugged_in: called before init
  535. [ 1.601526] adjust_soc: ibat_ua = 365300, vbat_uv = 3689905, soc = 19, batt_temp=350
  536. [ 1.602044] power_supply usb: driver failed to report `present' property: 4294967274
  537. [ 1.602197] power_supply usb: driver failed to report `present' property: 4294967274
  538. [ 1.602380] power_supply pm8921-dc: driver failed to report `present' property: 4294967274
  539. [ 1.602502] power_supply pm8921-dc: driver failed to report `present' property: 4294967274
  540. [ 1.603815] pm8921_get_batt_state: called before init
  541. [ 1.606104] pm8921_get_batt_state: called before init
  542. [ 1.612696] wlc: bq51051b_wlc_probe: probe
  543. [ 1.612788] wlc: bq51051b_wlc_hw_init: hw_init
  544. [ 1.613306] power_supply wireless: driver failed to report `present' property: 4294967274
  545. [ 1.613520] msm_otg msm_otg: USB in low power mode
  546. [ 1.613673] power_supply wireless: driver failed to report `present' property: 4294967274
  547. [ 1.613917] batt_temp_ctrl_init
  548. [ 1.614039] batt_temp_ctrl_probe
  549. [ 1.614954] android_vibrator: default amplitude 88
  550. [ 1.615107] android vibrator probed
  551. [ 1.615412] fsa8008 init
  552. [ 1.615656] fsa8008 probe
  553. [ 1.616175] input: hs_detect as /devices/virtual/input/input5
  554. [ 1.616450] ALSA device list:
  555. [ 1.616511] #0: apq8064-tabla-snd-card
  556. [ 1.617518] Freeing init memory: 1040K
  557. [ 1.647703] type=1403 audit(1374874107.590:2): policy loaded auid=4294967295 ses=4294967295
  558. [ 1.647947] SELinux: Loaded policy from (null)
  559. [ 1.653532] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  560. [ 1.897298] keychord: using input dev pmic8xxx_pwrkey for fevent
  561. [ 1.897390] keychord: using input dev keypad_8064 for fevent
  562. [ 1.897939] init: cannot open '/initlogo.rle'
  563. [ 1.916404] zcache: created ephemeral tmem pool, id=0, client=65535
  564. [ 1.916709] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: barrier=1
  565. [ 1.983824] zcache: created ephemeral tmem pool, id=1, client=65535
  566. [ 1.983946] EXT4-fs (mmcblk0p22): recovery complete
  567. [ 1.984800] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
  568. [ 1.985014] zcache: destroyed pool id=1, cli_id=65535
  569. [ 1.991362] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/cache
  570. [ 2.041507] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
  571. [ 2.041599] e2fsck: /dev/block/platform/msm_sdcc.1/by-name/cache: clean, 14/35840 files, 4621/143360 blocks
  572. [ 2.050389] zcache: created ephemeral tmem pool, id=1, client=65535
  573. [ 2.050511] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered
  574. [ 2.741309] zcache: created ephemeral tmem pool, id=2, client=65535
  575. [ 2.743323] EXT4-fs (mmcblk0p23): 4 orphan inodes deleted
  576. [ 2.743384] EXT4-fs (mmcblk0p23): recovery complete
  577. [ 2.794628] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
  578. [ 2.794933] zcache: destroyed pool id=2, cli_id=65535
  579. [ 7.811902] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/userdata
  580. [ 7.906912] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
  581. [ 7.907004] e2fsck: /dev/block/platform/msm_sdcc.1/by-name/userdata: clean, 7175/863264 files, 2181222/3449596 blocks
  582. [ 7.916191] zcache: created ephemeral tmem pool, id=2, client=65535
  583. [ 7.916404] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,noauto_da_alloc
  584. [ 7.945276] zcache: created ephemeral tmem pool, id=3, client=65535
  585. [ 7.945399] EXT4-fs (mmcblk0p20): recovery complete
  586. [ 7.950190] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,nodelalloc
  587. [ 7.960079] adsp_boot_store:going to call adsp_loader_do
  588. [ 8.360994] pil pil0: q6: Brought out of reset
  589. [ 8.399938] apr_tal:Q6 Is Up
  590. [ 8.416572] diag: proc 1, msg mask update fail -12, tried 419
  591. [ 8.461773] adsp_loader_do: Q6/ADSP image is loaded
  592. [ 8.525743] wcnss_wlan triggered by userspace
  593. [ 8.723668] pil pil1: wcnss: Brought out of reset
  594. [ 8.723973] wcnss_8960: Subsystem restart activated for riva.
  595. [ 8.768350] pil pil4: gss: Failed to locate gss.mdt
  596. [ 8.769662] pil pil4: gss: Failed to locate gss.mdt
  597. [ 8.770975] pil pil4: gss: Failed to locate gss.mdt
  598. [ 8.772104] pil pil4: gss: Failed to locate gss.mdt
  599. [ 8.789409] warning: `daemonsu' uses 32-bit capabilities (legacy support in use)
  600. [ 8.808789] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
  601. [ 8.808942] init: using deprecated syntax for specifying property 'ro.product.manufacturer', use ${name} instead
  602. [ 8.809125] init: using deprecated syntax for specifying property 'ro.product.model', use ${name} instead
  603. [ 8.809705] usbcore: registered new interface driver rmnet_usb
  604. [ 8.812452] rmnet usb ctrl Initialized.
  605. [ 8.825301] enable_store: android_usb: already disabled
  606. [ 8.826186] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
  607. [ 8.828414] adb_open
  608. [ 8.828506] mtp_bind_config
  609. [ 8.828628] adb_bind_config
  610. [ 8.888966] mdm_modem_ioctl: Powering on mdm id 0
  611. [ 8.909964] msm_thermal: Max frequency reset for cpu0
  612. [ 8.910117] msm_thermal: Max frequency reset for cpu1
  613. [ 8.910178] msm_thermal: Max frequency reset for cpu2
  614. [ 8.910300] msm_thermal: Max frequency reset for cpu3
  615. [ 8.910361] msm_thermal: disabling...
  616. [ 8.910422] msm_thermal: enabled = 0
  617. [ 8.982878] QSEECOM: qseecom_load_app: App (keymaster) does'nt exist, loading apps for first time
  618. [ 9.091835] QSEECOM: qseecom_load_app: App with id 1 (keymaster) now loaded
  619. [ 9.155012] pil pil3: dsps: Brought out of reset
  620. [ 9.202746] wcnss_wlan_ctrl_probe: SMD ctrl channel up
  621. [ 9.203021] wcnss: version 01040102
  622. [ 9.371768] mipi_dsi_controller_cfg: DSI status=8 failed
  623. [ 9.371799] mipi_dsi_panel_power: mipi lcd function started status = 1
  624. [ 9.371829] ext_dsv_load: Failed to create debugfs directory
  625. [ 9.373782] mipi_dsi_panel_power : reset start.
  626. [ 9.394994] mipi_lgit_lcd_on started
  627. [ 9.419044] mipi_lgit_lcd_on finished
  628. [ 9.510911] msm_ipc_router_create: Do not have permissions
  629. [ 9.677857] hdmi_msm hdmi_msm.1: hdmi_msm_hpd_feature: 1
  630. [ 9.926842] mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 96000000
  631. [ 15.958492] mdm_modem_ioctl: normal boot of mdm id 0 done
  632. [ 15.968228] mdm_pblrdy_change: mdm id 0: pbl ready:0
  633. [ 16.610926] mdm_status_change: status = 1: mdm id 0 is now ready
  634. [ 16.612452] msm_hsic_host msm_hsic_host: remove, state 1
  635. [ 16.612513] usb usb1: USB disconnect, device number 1
  636. [ 16.612604] usb 1-1: USB disconnect, device number 2
  637. [ 16.614954] msm_hsic_host msm_hsic_host: USB bus 1 deregistered
  638. [ 16.628567] msm_hsic_host msm_hsic_host: Qualcomm EHCI Host Controller using HSIC
  639. [ 16.628628] msm_hsic_host msm_hsic_host: new USB bus registered, assigned bus number 1
  640. [ 16.629207] request_suspend_state: wakeup (3->0) at 16617479791 (2013-07-26 21:28:42.570344697 UTC)
  641. [ 16.651823] msm_hsic_host msm_hsic_host: irq 261, io mem 0x12510000
  642. [ 16.671814] msm_hsic_host msm_hsic_host: USB 2.0 started, EHCI 1.00
  643. [ 16.671997] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  644. [ 16.672119] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  645. [ 16.672150] usb usb1: Product: Qualcomm EHCI Host Controller using HSIC
  646. [ 16.672272] usb usb1: Manufacturer: Linux 3.4.0-faux123-mako-custom-jb43 ehci_hcd
  647. [ 16.672363] usb usb1: SerialNumber: msm_hsic_host
  648. [ 16.672882] hub 1-0:1.0: USB hub found
  649. [ 16.672943] hub 1-0:1.0: 1 port detected
  650. [ 16.733129] lowmem_shrink: convert oom_adj to oom_score_adj:
  651. [ 16.733190] oom_adj 0 => oom_score_adj 0
  652. [ 16.733282] oom_adj 1 => oom_score_adj 58
  653. [ 16.733343] oom_adj 2 => oom_score_adj 117
  654. [ 16.733404] oom_adj 4 => oom_score_adj 235
  655. [ 16.733496] oom_adj 9 => oom_score_adj 529
  656. [ 16.733557] oom_adj 15 => oom_score_adj 1000
  657. [ 16.840103] zcache: created ephemeral tmem pool, id=4, client=65535
  658. [ 16.840286] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
  659. [ 16.869769] zcache: created ephemeral tmem pool, id=5, client=65535
  660. [ 16.874835] EXT4-fs (dm-0): re-mounted. Opts: (null)
  661. [ 16.897054] EXT4-fs (dm-0): re-mounted. Opts: (null)
  662. [ 16.970090] zcache: created ephemeral tmem pool, id=6, client=65535
  663. [ 16.970181] EXT4-fs (dm-1): mounted filesystem without journal. Opts: (null)
  664. [ 16.984892] zcache: created ephemeral tmem pool, id=7, client=65535
  665. [ 16.989989] EXT4-fs (dm-1): re-mounted. Opts: (null)
  666. [ 16.996184] wlan: loading driver v3.2.2.17
  667. [ 17.003906] EXT4-fs (dm-1): re-mounted. Opts: (null)
  668. [ 17.010865] wlan: [536:E :VOS] INFO: NV binary file version=0 Driver default NV version=1, continue...
  669. [ 17.010865]
  670. [ 17.011078] wlan: [536:E :VOS] !!!WARNING: Using Coupler Type field instead of Fw Config table,
  671. [ 17.011078] Make sure that this is intented or may impact performance!!!
  672. [ 17.011078]
  673. [ 17.011323] DefaultCountry is WS
  674. [ 17.011841] usb 1-1: new high-speed USB device number 2 using msm_hsic_host
  675. [ 17.077002] usb 1-1: New USB device found, idVendor=05c6, idProduct=9048
  676. [ 17.077124] usb 1-1: New USB device strings: Mfr=3, Product=2, SerialNumber=0
  677. [ 17.077186] usb 1-1: Product: Qualcomm CDMA Technologies MSM
  678. [ 17.077277] usb 1-1: Manufacturer: Qualcomm, Incorporated
  679. [ 17.090553] rmnet_usb 1-1:1.5: rmnet_usb0: register 'rmnet_usb' at usb-msm_hsic_host-1, RmNET net device, 2a:eb:90:2e:39:77
  680. [ 17.094521] rmnet_usb 1-1:1.6: rmnet_usb1: register 'rmnet_usb' at usb-msm_hsic_host-1, RmNET net device, 2a:eb:90:2e:39:77
  681. [ 17.124217] rmnet_usb 1-1:1.7: rmnet_usb2: register 'rmnet_usb' at usb-msm_hsic_host-1, RmNET net device, 2a:eb:90:2e:39:77
  682. [ 17.136120] rmnet_usb 1-1:1.8: rmnet_usb3: register 'rmnet_usb' at usb-msm_hsic_host-1, RmNET net device, 2a:eb:90:2e:39:77
  683. [ 17.294033] wlan: WCNSS WLAN version 1.4.1.2
  684. [ 17.294155] wlan: WCNSS software version 201023
  685. [ 17.294216] wlan: WCNSS hardware version WCN v2.0 RadioPhy vIris_TSMC_2.0 with 48MHz XO
  686. [ 17.294430] DefaultCountry is WS
  687. [ 17.317045] wlan: driver loaded
  688. [ 17.360628] wlan: [721:E :SME] PMC: STA not associated with an AP with single active session. BMPS cannot be entered
  689. [ 17.361422] ADDRCONF(NETDEV_UP): p2p0: link is not ready
  690. [ 17.381260] wlan: [721:E :SME] PMC: STA not associated with an AP with single active session. BMPS cannot be entered
  691. [ 17.381962] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  692. [ 19.212238] wcnss_post_bootup: Cancel APPS vote for Iris & Riva
  693. [ 19.525560] msm_ipc_router_create: Do not have permissions
  694. [ 19.541553] msm_ipc_router_create: Do not have permissions
  695. [ 19.573477] msm_ipc_router_create: Do not have permissions
  696. [ 19.597558] msm_ipc_router_create: Do not have permissions
  697. [ 19.787944] wlan: [721:E :HDD] wlan_hdd_cfg80211_set_cipher: received cipher 0 - considering none
  698. [ 19.788097] wlan: [721:E :HDD] wlan_hdd_cfg80211_set_cipher: received cipher 0 - considering none
  699. [ 19.843827] wlan: [713:E :PE ] wlan_cfgGetInt: 323: Not valid cfg id 1
  700. [ 19.851152] wlan: connected to 00:1a:2b:95:81:dc
  701. [ 19.851243] wlan(1) 00:1a:2b:95:81:dc Standalone
  702. [ 19.851884] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  703. [ 20.199786] acc_open
  704. [ 20.199847] acc_release
  705. [ 20.207446] wlan: [713:E :PE ] __limProcessAddBAReq: 1307: ADDBAREQ NUMBUFF 64
  706. [ 21.033358] msm_ipc_router_create: Do not have permissions
  707. [ 21.089211] msm_ipc_router_create: Do not have permissions
  708. [ 21.134625] msm_ipc_router_create: Do not have permissions
  709. [ 21.165634] msm_ipc_router_create: Do not have permissions
  710. [ 21.188066] msm_ipc_router_create: Do not have permissions
  711. [ 21.265862] msm_ipc_router_create: Do not have permissions
  712. [ 21.278132] msm_ipc_router_create: Do not have permissions
  713. [ 21.314573] msm_ipc_router_create: Do not have permissions
  714. [ 21.391027] msm_ipc_router_create: Do not have permissions
  715. [ 21.457012] msm_ipc_router_create: Do not have permissions
  716. [ 21.480909] wlan: [713:E :SME] sme_QosPmcDeviceStateUpdateInd: 7214: nothing to process in PMC state 6
  717. [ 21.702212] bcm2079x-i2c 0-a1fa: 10,28
  718. [ 21.974637] msm_ipc_router_create: Do not have permissions
  719. [ 21.989745] msm_ipc_router_create: Do not have permissions
  720. [ 22.009980] msm_ipc_router_create: Do not have permissions
  721. [ 22.012543] bcm2079x-i2c 0-a1fa: bcm2079x_dev_unlocked_ioctl, BCMNFC_CHANGE_ADDR (fa02, 77):
  722. [ 22.012604] bcm2079x-i2c 0-a1fa: Change client device from (0x0079) flag = 0000, addr_data[9] = 69
  723. [ 22.013093] bcm2079x-i2c 0-a1fa: Change client device changed to (0x0077) flag = 0000, ret = 10
  724. [ 22.062444] msm_ipc_router_create: Do not have permissions
  725. [ 22.101541] msm_ipc_router_create: Do not have permissions
  726. [ 22.121898] adjust_soc: ibat_ua = 1186700, vbat_uv = 3558615, soc = 19, batt_temp=355
  727. [ 23.272913] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
  728. [ 23.277979] transport_store: usb cable is not connected
  729. [ 26.425667] pm8921_battery_gauge_alarm_notify: status: 1
  730. [ 33.971738] lm3530_backlight_off, on: 1
  731. [ 34.001068] lm3530_backlight_off, on: 0
  732. [ 34.032473] mipi_lgit_lcd_off started
  733. [ 34.162490] mipi_lgit_lcd_off finished
  734. [ 34.162520] mipi_dsi_panel_power: mipi lcd function started status = 0
  735. [ 34.167282] lm3530_backlight_off, on: 0
  736. [ 34.168075] request_suspend_state: sleep (0->3) at 34155674526 (2013-07-26 21:28:59.857415244 UTC)
  737. [ 34.558003] wlan: [713:E :SME] sme_QosPmcDeviceStateUpdateInd: 7214: nothing to process in PMC state 6
  738. [ 34.558156] wlan: [721:E :HDD] hdd_conf_hostarpoffload:
  739. [ 34.558156]
  740. [ 34.558339] wlan: [721:E :HDD] hdd_conf_hostarpoffload: Enabled
  741. [ 34.558339]
  742. [ 36.541736] [Touch D]touch disable
  743. [ 36.575705] active wake lock PowerManagerService.WakeLocks
  744. [ 36.575797] PM: Syncing filesystems...
  745. [ 36.753456] sync done.
  746. [ 37.445872] init: untracked pid 1920 exited
  747. [ 41.256371] suspend: enter suspend
  748. [ 41.256462] PM: suspend entry 2013-07-26 21:29:06.945832755 UTC
  749. [ 41.256493] PM: Syncing filesystems...
  750. [ 41.406317] Freezing user space processes ... (elapsed 0.001 seconds) done.
  751. [ 41.414008] sync done.
  752. [ 41.414069] PM: Syncing filesystems...
  753. [ 41.420692] sync done.
  754. [ 41.652464] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  755. [ 41.655577] Suspending console(s) (use no_console_suspend to debug)
  756.  
  757. 5 Corrected bytes, 0 unrecoverable blocks
  758. Boot info:
  759. Last boot reason: hw_reset_or_poweron
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!