My Pastes
Public Pastes
Layout Width
Share Pastebin
Guest
Public paste!

piper69

By: a guest | Jun 6th, 2010 | Syntax: None | Size: 50.10 KB | Hits: 60 | Expires: Never
Download | Raw | Embed | Report abuse
Copy text to clipboard
  1. [    0.000000] Initializing cgroup subsys cpuset
  2. [    0.000000] Initializing cgroup subsys cpu
  3. [    0.000000] Linux version 2.6.31-21-generic (buildd@yellow) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu9) ) #59-Ubuntu SMP Wed Mar 24 07:28:27 UTC 2010 (Ubuntu 2.6.31-21.59-generic)
  4. [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-21-generic root=UUID=d31c9ec3-e0b6-4e46-9ae9-8b2d534f2521 ro quiet splash
  5. [    0.000000] KERNEL supported cpus:
  6. [    0.000000]   Intel GenuineIntel
  7. [    0.000000]   AMD AuthenticAMD
  8. [    0.000000]   Centaur CentaurHauls
  9. [    0.000000] BIOS-provided physical RAM map:
  10. [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
  11. [    0.000000]  BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
  12. [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
  13. [    0.000000]  BIOS-e820: 0000000000100000 - 000000007bef0000 (usable)
  14. [    0.000000]  BIOS-e820: 000000007bef0000 - 000000007bef3000 (ACPI NVS)
  15. [    0.000000]  BIOS-e820: 000000007bef3000 - 000000007bf00000 (ACPI data)
  16. [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
  17. [    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
  18. [    0.000000] DMI 2.4 present.
  19. [    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
  20. [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
  21. [    0.000000] last_pfn = 0x7bef0 max_arch_pfn = 0x400000000
  22. [    0.000000] MTRR default type: uncachable
  23. [    0.000000] MTRR fixed ranges enabled:
  24. [    0.000000]   00000-9FFFF write-back
  25. [    0.000000]   A0000-BFFFF uncachable
  26. [    0.000000]   C0000-C7FFF write-protect
  27. [    0.000000]   C8000-CFFFF uncachable
  28. [    0.000000]   D0000-D3FFF write-back
  29. [    0.000000]   D4000-FFFFF uncachable
  30. [    0.000000] MTRR variable ranges enabled:
  31. [    0.000000]   0 base 0000000000 mask FFC0000000 write-back
  32. [    0.000000]   1 base 0040000000 mask FFE0000000 write-back
  33. [    0.000000]   2 base 0060000000 mask FFF0000000 write-back
  34. [    0.000000]   3 base 0070000000 mask FFF8000000 write-back
  35. [    0.000000]   4 base 0078000000 mask FFFC000000 write-back
  36. [    0.000000]   5 base 007BF00000 mask FFFFF00000 uncachable
  37. [    0.000000]   6 disabled
  38. [    0.000000]   7 disabled
  39. [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  40. [    0.000000] Scanning 0 areas for low memory corruption
  41. [    0.000000] modified physical RAM map:
  42. [    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
  43. [    0.000000]  modified: 0000000000010000 - 000000000009f400 (usable)
  44. [    0.000000]  modified: 000000000009f400 - 00000000000a0000 (reserved)
  45. [    0.000000]  modified: 00000000000f0000 - 0000000000100000 (reserved)
  46. [    0.000000]  modified: 0000000000100000 - 000000007bef0000 (usable)
  47. [    0.000000]  modified: 000000007bef0000 - 000000007bef3000 (ACPI NVS)
  48. [    0.000000]  modified: 000000007bef3000 - 000000007bf00000 (ACPI data)
  49. [    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
  50. [    0.000000]  modified: 00000000fec00000 - 0000000100000000 (reserved)
  51. [    0.000000] initial memory mapped : 0 - 20000000
  52. [    0.000000] init_memory_mapping: 0000000000000000-000000007bef0000
  53. [    0.000000] NX (Execute Disable) protection: active
  54. [    0.000000]  0000000000 - 007be00000 page 2M
  55. [    0.000000]  007be00000 - 007bef0000 page 4k
  56. [    0.000000] kernel direct mapping tables up to 7bef0000 @ 10000-14000
  57. [    0.000000] RAMDISK: 37831000 - 37fefb64
  58. [    0.000000] ACPI: RSDP 00000000000f8600 00014 (v00 HP-CPC)
  59. [    0.000000] ACPI: RSDT 000000007bef3040 00038 (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
  60. [    0.000000] ACPI: FACP 000000007bef30c0 00084 (v02 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
  61. [    0.000000] ACPI: DSDT 000000007bef31c0 03C55 (v01 HP-CPC AWRDACPI 00001000 MSFT 0100000E)
  62. [    0.000000] ACPI: FACS 000000007bef0000 00040
  63. [    0.000000] ACPI: SSDT 000000007bef6f40 00188 (v01 HP-CPC POWERNOW 00000001  LTP 00000001)
  64. [    0.000000] ACPI: SRAT 000000007bef7140 000A0 (v01 HP-CPC HAMMER   00000001 AMD  00000001)
  65. [    0.000000] ACPI: MCFG 000000007bef7240 0003C (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
  66. [    0.000000] ACPI: APIC 000000007bef6e80 00068 (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
  67. [    0.000000] ACPI: Local APIC address 0xfee00000
  68. [    0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
  69. [    0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0
  70. [    0.000000] SRAT: Node 0 PXM 0 0-a0000
  71. [    0.000000] SRAT: Node 0 PXM 0 100000-80000000
  72. [    0.000000] NUMA: Allocated memnodemap from 12000 - 13040
  73. [    0.000000] NUMA: Using 20 for the hash shift.
  74. [    0.000000] Bootmem setup node 0 0000000000000000-000000007bef0000
  75. [    0.000000]   NODE_DATA [0000000000013040 - 000000000001803f]
  76. [    0.000000]   bootmap [0000000000019000 -  00000000000287df] pages 10
  77. [    0.000000] (8 early reservations) ==> bootmem [0000000000 - 007bef0000]
  78. [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  79. [    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  80. [    0.000000]   #2 [0001000000 - 00019ebe8c]    TEXT DATA BSS ==> [0001000000 - 00019ebe8c]
  81. [    0.000000]   #3 [0037831000 - 0037fefb64]          RAMDISK ==> [0037831000 - 0037fefb64]
  82. [    0.000000]   #4 [000009f400 - 0000100000]    BIOS reserved ==> [000009f400 - 0000100000]
  83. [    0.000000]   #5 [00019ec000 - 00019ec41c]              BRK ==> [00019ec000 - 00019ec41c]
  84. [    0.000000]   #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
  85. [    0.000000]   #7 [0000012000 - 0000013040]       MEMNODEMAP ==> [0000012000 - 0000013040]
  86. [    0.000000] found SMP MP-table at [ffff8800000f46e0] f46e0
  87. [    0.000000]  [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001e00000-ffff8800039fffff] on node 0
  88. [    0.000000] Zone PFN ranges:
  89. [    0.000000]   DMA      0x00000010 -> 0x00001000
  90. [    0.000000]   DMA32    0x00001000 -> 0x00100000
  91. [    0.000000]   Normal   0x00100000 -> 0x00100000
  92. [    0.000000] Movable zone start PFN for each node
  93. [    0.000000] early_node_map[2] active PFN ranges
  94. [    0.000000]     0: 0x00000010 -> 0x0000009f
  95. [    0.000000]     0: 0x00000100 -> 0x0007bef0
  96. [    0.000000] On node 0 totalpages: 507519
  97. [    0.000000]   DMA zone: 56 pages used for memmap
  98. [    0.000000]   DMA zone: 102 pages reserved
  99. [    0.000000]   DMA zone: 3825 pages, LIFO batch:0
  100. [    0.000000]   DMA32 zone: 6885 pages used for memmap
  101. [    0.000000]   DMA32 zone: 496651 pages, LIFO batch:31
  102. [    0.000000] SB4X0 revision 0x11
  103. [    0.000000] Ignoring ACPI timer override.
  104. [    0.000000] If you got timer trouble try acpi_use_timer_override
  105. [    0.000000] ACPI: PM-Timer IO Port: 0x4008
  106. [    0.000000] ACPI: Local APIC address 0xfee00000
  107. [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  108. [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
  109. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
  110. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
  111. [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
  112. [    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
  113. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  114. [    0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
  115. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
  116. [    0.000000] Using ACPI (MADT) for SMP configuration information
  117. [    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
  118. [    0.000000] nr_irqs_gsi: 24
  119. [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
  120. [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
  121. [    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
  122. [    0.000000] Allocating PCI resources starting at 7bf00000 (gap: 7bf00000:64100000)
  123. [    0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
  124. [    0.000000] PERCPU: Embedded 30 pages at ffff8800019fd000, static data 90720 bytes
  125. [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 500476
  126. [    0.000000] Policy zone: DMA32
  127. [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-21-generic root=UUID=d31c9ec3-e0b6-4e46-9ae9-8b2d534f2521 ro quiet splash
  128. [    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
  129. [    0.000000] Initializing CPU#0
  130. [    0.000000] Checking aperture...
  131. [    0.000000] No AGP bridge found
  132. [    0.000000] Node 0: aperture @ 400000000 size 32 MB
  133. [    0.000000] Aperture beyond 4GB. Ignoring.
  134. [    0.000000] Memory: 1982904k/2030528k available (5332k kernel code, 452k absent, 47172k reserved, 3018k data, 668k init)
  135. [    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  136. [    0.000000] NR_IRQS:4352 nr_irqs:424
  137. [    0.000000] Fast TSC calibration using PIT
  138. [    0.000000] Detected 1989.658 MHz processor.
  139. [    0.000014] spurious 8259A interrupt: IRQ7.
  140. [    0.000794] Console: colour VGA+ 80x25
  141. [    0.000797] console [tty0] enabled
  142. [    0.010000] allocated 20971520 bytes of page_cgroup
  143. [    0.010000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  144. [    0.010009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3979.31 BogoMIPS (lpj=19896580)
  145. [    0.010041] Security Framework initialized
  146. [    0.010065] AppArmor: AppArmor initialized
  147. [    0.010256] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  148. [    0.011552] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  149. [    0.012158] Mount-cache hash table entries: 256
  150. [    0.012319] Initializing cgroup subsys ns
  151. [    0.012324] Initializing cgroup subsys cpuacct
  152. [    0.012328] Initializing cgroup subsys memory
  153. [    0.012337] Initializing cgroup subsys devices
  154. [    0.012339] Initializing cgroup subsys freezer
  155. [    0.012341] Initializing cgroup subsys net_cls
  156. [    0.012354] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
  157. [    0.012357] CPU: L2 Cache: 512K (64 bytes/line)
  158. [    0.012361] CPU 0/0x0 -> Node 0
  159. [    0.012363] tseg: 007bf00000
  160. [    0.012365] CPU: Physical Processor ID: 0
  161. [    0.012366] CPU: Processor Core ID: 0
  162. [    0.012370] mce: CPU supports 5 MCE banks
  163. [    0.012381] Performance Counters: AMD PMU driver.
  164. [    0.012387] ... version:                 0
  165. [    0.012388] ... bit width:               48
  166. [    0.012390] ... generic counters:        4
  167. [    0.012392] ... value mask:              0000ffffffffffff
  168. [    0.012394] ... max period:              00007fffffffffff
  169. [    0.012396] ... fixed-purpose counters:  0
  170. [    0.012397] ... counter mask:            000000000000000f
  171. [    0.014077] ACPI: Core revision 20090521
  172. [    0.020091] Setting APIC routing to flat
  173. [    0.020296]   alloc irq_desc for 21 on node 0
  174. [    0.020299]   alloc kstat_irqs on node 0
  175. [    0.020441] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
  176. [    0.122317] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
  177. [    0.130000] Booting processor 1 APIC 0x1 ip 0x6000
  178. [    0.010000] Initializing CPU#1
  179. [    0.010000] Calibrating delay using timer specific routine.. 3979.71 BogoMIPS (lpj=19898575)
  180. [    0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
  181. [    0.010000] CPU: L2 Cache: 512K (64 bytes/line)
  182. [    0.010000] CPU 1/0x1 -> Node 0
  183. [    0.010000] CPU: Physical Processor ID: 0
  184. [    0.010000] CPU: Processor Core ID: 1
  185. [    0.010000] mce: CPU supports 5 MCE banks
  186. [    0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
  187. [    0.280467] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
  188. [    0.280481] Brought up 2 CPUs
  189. [    0.280483] Total of 2 processors activated (7959.03 BogoMIPS).
  190. [    0.280536] CPU0 attaching sched-domain:
  191. [    0.280539]  domain 0: span 0-1 level MC
  192. [    0.280541]   groups: 0 1
  193. [    0.280547] CPU1 attaching sched-domain:
  194. [    0.280549]  domain 0: span 0-1 level MC
  195. [    0.280551]   groups: 1 0
  196. [    0.280620] Booting paravirtualized kernel on bare hardware
  197. [    0.280620] regulator: core version 0.5
  198. [    0.280620] Time:  2:42:20  Date: 06/07/10
  199. [    0.280620] NET: Registered protocol family 16
  200. [    0.280620] node 0 link 0: io port [d000, ffff]
  201. [    0.280620] TOM: 0000000080000000 aka 2048M
  202. [    0.280620] node 0 link 0: mmio [a0000, bffff]
  203. [    0.280620] node 0 link 0: mmio [80000000, dfffffff]
  204. [    0.280620] node 0 link 0: mmio [f0000000, fe02ffff]
  205. [    0.280620] node 0 link 0: mmio [e0000000, e02fffff]
  206. [    0.280620] bus: [00,02] on node 0 link 0
  207. [    0.280620] bus: 00 index 0 io port: [0, ffff]
  208. [    0.280620] bus: 00 index 1 mmio: [a0000, bffff]
  209. [    0.280620] bus: 00 index 2 mmio: [80000000, efffffff]
  210. [    0.280620] bus: 00 index 3 mmio: [f0000000, fcffffffff]
  211. [    0.280620] ACPI: bus type pci registered
  212. [    0.280620] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
  213. [    0.280620] PCI: MCFG area at e0000000 reserved in E820
  214. [    0.285124] PCI: Using MMCONFIG at e0000000 - efffffff
  215. [    0.285127] PCI: Using configuration type 1 for base access
  216. [    0.285997] bio: create slab <bio-0> at 0
  217. [    0.285997] ACPI: EC: Look up EC in DSDT
  218. [    0.292126] ACPI: Interpreter enabled
  219. [    0.292131] ACPI: (supports S0 S1 S3 S4 S5)
  220. [    0.292155] ACPI: Using IOAPIC for interrupt routing
  221. [    0.295541] ACPI: No dock devices found.
  222. [    0.295651] ACPI: PCI Root Bridge [PCI0] (0000:00)
  223. [    0.295697] pci 0000:00:00.0: reg 18 io port: [0x4100-0x411f]
  224. [    0.295703] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
  225. [    0.295809] pci 0000:00:12.0: reg 10 io port: [0xfe00-0xfe07]
  226. [    0.295818] pci 0000:00:12.0: reg 14 io port: [0xfd00-0xfd03]
  227. [    0.295826] pci 0000:00:12.0: reg 18 io port: [0xfc00-0xfc07]
  228. [    0.295835] pci 0000:00:12.0: reg 1c io port: [0xfb00-0xfb03]
  229. [    0.295843] pci 0000:00:12.0: reg 20 io port: [0xfa00-0xfa0f]
  230. [    0.295852] pci 0000:00:12.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f1ff]
  231. [    0.295861] pci 0000:00:12.0: reg 30 32bit mmio: [0x000000-0x07ffff]
  232. [    0.295894] pci 0000:00:12.0: supports D1 D2
  233. [    0.295941] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff]
  234. [    0.296044] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
  235. [    0.296156] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe02c000-0xfe02cfff]
  236. [    0.296223] pci 0000:00:13.2: supports D1 D2
  237. [    0.296226] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
  238. [    0.296232] pci 0000:00:13.2: PME# disabled
  239. [    0.296284] pci 0000:00:14.0: reg 10 io port: [0x500-0x50f]
  240. [    0.296293] pci 0000:00:14.0: reg 14 32bit mmio: [0xfe02b000-0xfe02b3ff]
  241. [    0.296328] HPET not enabled in BIOS. You might try hpet=force boot option
  242. [    0.296391] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
  243. [    0.296400] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
  244. [    0.296408] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
  245. [    0.296417] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
  246. [    0.296426] pci 0000:00:14.1: reg 20 io port: [0xf800-0xf80f]
  247. [    0.296610] pci 0000:00:14.5: reg 10 32bit mmio: [0xfe02a000-0xfe02a0ff]
  248. [    0.296776] pci 0000:01:05.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff]
  249. [    0.296781] pci 0000:01:05.0: reg 14 io port: [0xef00-0xefff]
  250. [    0.296785] pci 0000:01:05.0: reg 18 32bit mmio: [0xfdef0000-0xfdefffff]
  251. [    0.296794] pci 0000:01:05.0: reg 30 32bit mmio: [0x000000-0x01ffff]
  252. [    0.296803] pci 0000:01:05.0: supports D1 D2
  253. [    0.296820] pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
  254. [    0.296823] pci 0000:00:01.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
  255. [    0.296827] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd8000000-0xdfffffff]
  256. [    0.296893] pci 0000:02:01.0: reg 10 32bit mmio: [0xf4000000-0xf7ffffff]
  257. [    0.297029] pci 0000:02:02.0: reg 10 32bit mmio: [0xfbfe0000-0xfbfeffff]
  258. [    0.297158] pci 0000:02:03.0: reg 10 io port: [0xdf00-0xdfff]
  259. [    0.297168] pci 0000:02:03.0: reg 14 32bit mmio: [0xfbfff000-0xfbfff0ff]
  260. [    0.297208] pci 0000:02:03.0: reg 30 32bit mmio: [0x000000-0x00ffff]
  261. [    0.297238] pci 0000:02:03.0: supports D1 D2
  262. [    0.297240] pci 0000:02:03.0: PME# supported from D1 D2 D3hot D3cold
  263. [    0.297247] pci 0000:02:03.0: PME# disabled
  264. [    0.297302] pci 0000:02:04.0: reg 10 32bit mmio: [0xfbffe000-0xfbffe7ff]
  265. [    0.297313] pci 0000:02:04.0: reg 14 io port: [0xde00-0xde7f]
  266. [    0.297383] pci 0000:02:04.0: supports D2
  267. [    0.297386] pci 0000:02:04.0: PME# supported from D2 D3hot D3cold
  268. [    0.297392] pci 0000:02:04.0: PME# disabled
  269. [    0.297457] pci 0000:00:14.4: transparent bridge
  270. [    0.297465] pci 0000:00:14.4: bridge io port: [0xd000-0xdfff]
  271. [    0.297471] pci 0000:00:14.4: bridge 32bit mmio: [0xf4000000-0xfbffffff]
  272. [    0.297477] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfdd00000-0xfddfffff]
  273. [    0.297491] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  274. [    0.297647] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
  275. [    0.297794] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
  276. [    0.311309] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
  277. [    0.311403] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
  278. [    0.311496] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
  279. [    0.311588] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
  280. [    0.311680] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11)
  281. [    0.311775] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11)
  282. [    0.311867] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11)
  283. [    0.311959] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
  284. [    0.312146] SCSI subsystem initialized
  285. [    0.312198] libata version 3.00 loaded.
  286. [    0.312198] usbcore: registered new interface driver usbfs
  287. [    0.312198] usbcore: registered new interface driver hub
  288. [    0.312198] usbcore: registered new device driver usb
  289. [    0.312198] ACPI: WMI: Mapper loaded
  290. [    0.312198] PCI: Using ACPI for IRQ routing
  291. [    0.312198] pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff]
  292. [    0.312198] pci 0000:00:00.0: BAR 3: can't allocate resource
  293. [    0.340007] Bluetooth: Core ver 2.15
  294. [    0.340024] NET: Registered protocol family 31
  295. [    0.340024] Bluetooth: HCI device and connection manager initialized
  296. [    0.340024] Bluetooth: HCI socket layer initialized
  297. [    0.340024] NetLabel: Initializing
  298. [    0.340024] NetLabel:  domain hash size = 128
  299. [    0.340024] NetLabel:  protocols = UNLABELED CIPSOv4
  300. [    0.340039] NetLabel:  unlabeled traffic allowed by default
  301. [    0.370015] pnp: PnP ACPI init
  302. [    0.370038] ACPI: bus type pnp registered
  303. [    0.372259] pnp 00:0a: mem resource (0xd0000-0xd3fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
  304. [    0.372264] pnp 00:0a: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
  305. [    0.372268] pnp 00:0a: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
  306. [    0.372272] pnp 00:0a: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
  307. [    0.372276] pnp 00:0a: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
  308. [    0.372280] pnp 00:0a: mem resource (0x100000-0x7beeffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
  309. [    0.372337] pnp: PnP ACPI: found 11 devices
  310. [    0.372339] ACPI: ACPI bus type pnp unregistered
  311. [    0.372351] system 00:01: ioport range 0x228-0x22f has been reserved
  312. [    0.372355] system 00:01: ioport range 0x40b-0x40b has been reserved
  313. [    0.372358] system 00:01: ioport range 0x4d6-0x4d6 has been reserved
  314. [    0.372361] system 00:01: ioport range 0xc00-0xc01 has been reserved
  315. [    0.372365] system 00:01: ioport range 0xc14-0xc14 has been reserved
  316. [    0.372368] system 00:01: ioport range 0xc50-0xc52 has been reserved
  317. [    0.372371] system 00:01: ioport range 0xc6c-0xc6d has been reserved
  318. [    0.372374] system 00:01: ioport range 0xc6f-0xc6f has been reserved
  319. [    0.372378] system 00:01: ioport range 0xcd4-0xcdf has been reserved
  320. [    0.372381] system 00:01: ioport range 0x4000-0x40fe has been reserved
  321. [    0.372385] system 00:01: ioport range 0x4210-0x4217 has been reserved
  322. [    0.372392] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
  323. [    0.372395] system 00:06: ioport range 0x800-0x87f has been reserved
  324. [    0.372408] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
  325. [    0.372414] system 00:0a: iomem range 0x7bf00000-0x7bffffff could not be reserved
  326. [    0.372418] system 00:0a: iomem range 0x7bef0000-0x7befffff could not be reserved
  327. [    0.372421] system 00:0a: iomem range 0xffff0000-0xffffffff has been reserved
  328. [    0.372425] system 00:0a: iomem range 0x7c000000-0x7fffffff has been reserved
  329. [    0.372429] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
  330. [    0.372432] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
  331. [    0.372436] system 00:0a: iomem range 0xfff80000-0xfffeffff has been reserved
  332. [    0.377132] AppArmor: AppArmor Filesystem Enabled
  333. [    0.377165] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
  334. [    0.377169] pci 0000:00:01.0:   IO window: 0xe000-0xefff
  335. [    0.377173] pci 0000:00:01.0:   MEM window: 0xfde00000-0xfdefffff
  336. [    0.377176] pci 0000:00:01.0:   PREFETCH window: 0x000000d8000000-0x000000dfffffff
  337. [    0.377182] pci 0000:00:14.4: PCI bridge, secondary bus 0000:02
  338. [    0.377186] pci 0000:00:14.4:   IO window: 0xd000-0xdfff
  339. [    0.377193] pci 0000:00:14.4:   MEM window: 0xf4000000-0xfbffffff
  340. [    0.377199] pci 0000:00:14.4:   PREFETCH window: 0xfdd00000-0xfddfffff
  341. [    0.377218] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
  342. [    0.377221] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
  343. [    0.377224] pci_bus 0000:01: resource 0 io:  [0xe000-0xefff]
  344. [    0.377227] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
  345. [    0.377230] pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xdfffffff]
  346. [    0.377233] pci_bus 0000:02: resource 0 io:  [0xd000-0xdfff]
  347. [    0.377236] pci_bus 0000:02: resource 1 mem: [0xf4000000-0xfbffffff]
  348. [    0.377239] pci_bus 0000:02: resource 2 pref mem [0xfdd00000-0xfddfffff]
  349. [    0.377242] pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
  350. [    0.377245] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff]
  351. [    0.377289] NET: Registered protocol family 2
  352. [    0.377442] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
  353. [    0.378411] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
  354. [    0.380033] Switched to high resolution mode on CPU 0
  355. [    0.380454] Switched to high resolution mode on CPU 1
  356. [    0.380917] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  357. [    0.381531] TCP: Hash tables configured (established 262144 bind 65536)
  358. [    0.381534] TCP reno registered
  359. [    0.381651] NET: Registered protocol family 1
  360. [    0.381730] Trying to unpack rootfs image as initramfs...
  361. [    0.584282] Freeing initrd memory: 7930k freed
  362. [    0.589494] Scanning for low memory corruption every 60 seconds
  363. [    0.589646] audit: initializing netlink socket (disabled)
  364. [    0.589662] type=2000 audit(1275878540.580:1): initialized
  365. [    0.599290] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  366. [    0.600880] VFS: Disk quotas dquot_6.5.2
  367. [    0.600942] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  368. [    0.601633] fuse init (API version 7.12)
  369. [    0.601720] msgmni has been set to 3888
  370. [    0.602008] alg: No test for stdrng (krng)
  371. [    0.602034] io scheduler noop registered
  372. [    0.602036] io scheduler anticipatory registered
  373. [    0.602038] io scheduler deadline registered
  374. [    0.602084] io scheduler cfq registered (default)
  375. [    0.602093] pci 0000:00:00.0: MSI quirk detected; MSI disabled
  376. [    0.660056] pci 0000:01:05.0: Boot video device
  377. [    0.660228] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  378. [    0.660253] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  379. [    0.660383] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
  380. [    0.660387] ACPI: Power Button [PWRF]
  381. [    0.660443] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
  382. [    0.660445] ACPI: Power Button [PWRB]
  383. [    0.660705] processor LNXCPU:00: registered as cooling_device0
  384. [    0.660709] ACPI: Processor [CPU0] (supports 8 throttling states)
  385. [    0.660818] processor LNXCPU:01: registered as cooling_device1
  386. [    0.660823] ACPI: Processor [CPU1] (supports 8 throttling states)
  387. [    0.663589] Linux agpgart interface v0.103
  388. [    0.663599] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  389. [    0.664759] brd: module loaded
  390. [    0.665198] loop: module loaded
  391. [    0.665278] input: Macintosh mouse button emulation as /devices/virtual/input/input2
  392. [    0.665491] sata_sil 0000:00:12.0: version 2.4
  393. [    0.665529]   alloc irq_desc for 22 on node 0
  394. [    0.665532]   alloc kstat_irqs on node 0
  395. [    0.665540] sata_sil 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
  396. [    0.665644] scsi0 : sata_sil
  397. [    0.665743] scsi1 : sata_sil
  398. [    0.665857] ata1: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f080 irq 22
  399. [    0.665862] ata2: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f0c0 irq 22
  400. [    0.666088]   alloc irq_desc for 16 on node 0
  401. [    0.666090]   alloc kstat_irqs on node 0
  402. [    0.666095] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  403. [    0.666198] scsi2 : pata_atiixp
  404. [    0.666254] scsi3 : pata_atiixp
  405. [    0.667286] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf800 irq 14
  406. [    0.667289] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf808 irq 15
  407. [    0.667917] Fixed MDIO Bus: probed
  408. [    0.667952] PPP generic driver version 2.4.2
  409. [    0.668033] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  410. [    0.668227]   alloc irq_desc for 19 on node 0
  411. [    0.668229]   alloc kstat_irqs on node 0
  412. [    0.668234] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
  413. [    0.668250] ehci_hcd 0000:00:13.2: EHCI Host Controller
  414. [    0.668312] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
  415. [    0.668381] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe02c000
  416. [    0.680025] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
  417. [    0.680097] usb usb1: configuration #1 chosen from 1 choice
  418. [    0.680131] hub 1-0:1.0: USB hub found
  419. [    0.680141] hub 1-0:1.0: 8 ports detected
  420. [    0.680223] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  421. [    0.680280] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
  422. [    0.680292] ohci_hcd 0000:00:13.0: OHCI Host Controller
  423. [    0.680331] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
  424. [    0.680349] ohci_hcd 0000:00:13.0: irq 19, io mem 0xfe02e000
  425. [    0.744079] usb usb2: configuration #1 chosen from 1 choice
  426. [    0.744107] hub 2-0:1.0: USB hub found
  427. [    0.744118] hub 2-0:1.0: 4 ports detected
  428. [    0.744225] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
  429. [    0.744235] ohci_hcd 0000:00:13.1: OHCI Host Controller
  430. [    0.744266] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
  431. [    0.744282] ohci_hcd 0000:00:13.1: irq 19, io mem 0xfe02d000
  432. [    0.804080] usb usb3: configuration #1 chosen from 1 choice
  433. [    0.804105] hub 3-0:1.0: USB hub found
  434. [    0.804115] hub 3-0:1.0: 4 ports detected
  435. [    0.804185] uhci_hcd: USB Universal Host Controller Interface driver
  436. [    0.804298] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
  437. [    0.804300] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
  438. [    0.804848] serio: i8042 KBD port at 0x60,0x64 irq 1
  439. [    0.804906] mice: PS/2 mouse device common for all mice
  440. [    0.804994] rtc_cmos 00:03: RTC can wake from S4
  441. [    0.805032] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
  442. [    0.805061] rtc0: alarms up to one month, 242 bytes nvram
  443. [    0.805189] device-mapper: uevent: version 1.0.3
  444. [    0.805290] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
  445. [    0.805394] device-mapper: multipath: version 1.1.0 loaded
  446. [    0.805397] device-mapper: multipath round-robin: version 1.0.0 loaded
  447. [    0.805624] cpuidle: using governor ladder
  448. [    0.805626] cpuidle: using governor menu
  449. [    0.806055] TCP cubic registered
  450. [    0.806189] NET: Registered protocol family 10
  451. [    0.806641] lo: Disabled Privacy Extensions
  452. [    0.806926] NET: Registered protocol family 17
  453. [    0.806948] Bluetooth: L2CAP ver 2.13
  454. [    0.806950] Bluetooth: L2CAP socket layer initialized
  455. [    0.806953] Bluetooth: SCO (Voice Link) ver 0.6
  456. [    0.806955] Bluetooth: SCO socket layer initialized
  457. [    0.806995] Bluetooth: RFCOMM TTY layer initialized
  458. [    0.806998] Bluetooth: RFCOMM socket layer initialized
  459. [    0.807000] Bluetooth: RFCOMM ver 1.11
  460. [    0.807028] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (2 cpu cores) (version 2.20.00)
  461. [    0.807076] powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x8
  462. [    0.807078] powernow-k8:    1 : fid 0xa (1800 MHz), vid 0xa
  463. [    0.807081] powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12
  464. [    0.807218] PM: Resume from disk failed.
  465. [    0.807232] registered taskstats version 1
  466. [    0.807383]   Magic number: 14:417:712
  467. [    0.807479] rtc_cmos 00:03: setting system clock to 2010-06-07 02:42:21 UTC (1275878541)
  468. [    0.807483] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  469. [    0.807485] EDD information not available.
  470. [    0.825400] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
  471. [    0.861684] ata3.00: ATA-5: WDC WD200BB-75CLB0, 05.04E05, max UDMA/100
  472. [    0.861687] ata3.00: 39102336 sectors, multi 16: LBA
  473. [    0.880603] ata3.01: HPA unlocked: 156250000 -> 156301488, native 156301488
  474. [    0.880607] ata3.01: ATA-5: WDC WD800BB-75CAA0, 16.06V16, max UDMA/100
  475. [    0.880610] ata3.01: 156301488 sectors, multi 16: LBA
  476. [    0.924172] ata3.00: configured for UDMA/100
  477. [    0.963945] ata3.01: configured for UDMA/100
  478. [    1.010040] ata1: SATA link down (SStatus 0 SControl 300)
  479. [    1.360042] ata2: SATA link down (SStatus 0 SControl 300)
  480. [    1.360160] scsi 2:0:0:0: Direct-Access     ATA      WDC WD200BB-75CL 05.0 PQ: 0 ANSI: 5
  481. [    1.360288] sd 2:0:0:0: Attached scsi generic sg0 type 0
  482. [    1.360347] scsi 2:0:1:0: Direct-Access     ATA      WDC WD800BB-75CA 16.0 PQ: 0 ANSI: 5
  483. [    1.360442] sd 2:0:1:0: Attached scsi generic sg1 type 0
  484. [    1.360477] sd 2:0:0:0: [sda] 39102336 512-byte logical blocks: (20.0 GB/18.6 GiB)
  485. [    1.360534] sd 2:0:0:0: [sda] Write Protect is off
  486. [    1.360537] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
  487. [    1.360561] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  488. [    1.360682]  sda: sda1 sda2 <
  489. [    1.369667] sd 2:0:1:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
  490. [    1.398877]  sda5 >
  491. [    1.398880] sd 2:0:1:0: [sdb] Write Protect is off
  492. [    1.398884] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
  493. [    1.398913] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  494. [    1.399062]  sdb: sdb1
  495. [    1.425700] sd 2:0:1:0: [sdb] Attached SCSI disk
  496. [    1.425766] sd 2:0:0:0: [sda] Attached SCSI disk
  497. [    1.520263] usb 2-1: new full speed USB device using ohci_hcd and address 2
  498. [    1.560663] ata4.00: ATAPI: HP      DVD Writer 740b, HI24, max UDMA/33
  499. [    1.560695] ata4.01: ATAPI: TSSTcorpDVD-ROM TS-H352C, HP02, max UDMA/33
  500. [    1.600626] ata4.00: configured for UDMA/33
  501. [    1.640531] ata4.01: configured for UDMA/33
  502. [    1.643941] scsi 3:0:0:0: CD-ROM            HP       DVD Writer 740b  HI24 PQ: 0 ANSI: 5
  503. [    1.646476] sr0: scsi3-mmc drive: 62x/62x writer cd/rw xa/form2 cdda tray
  504. [    1.646479] Uniform CD-ROM driver Revision: 3.20
  505. [    1.646556] sr 3:0:0:0: Attached scsi CD-ROM sr0
  506. [    1.646603] sr 3:0:0:0: Attached scsi generic sg2 type 5
  507. [    1.647210] scsi 3:0:1:0: CD-ROM            TSSTcorp DVD-ROM TS-H352C HP02 PQ: 0 ANSI: 5
  508. [    1.649363] sr1: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
  509. [    1.649428] sr 3:0:1:0: Attached scsi CD-ROM sr1
  510. [    1.649464] sr 3:0:1:0: Attached scsi generic sg3 type 5
  511. [    1.649504] Freeing unused kernel memory: 668k freed
  512. [    1.649841] Write protecting the kernel read-only data: 7600k
  513. [    1.779111] usb 2-1: configuration #1 chosen from 1 choice
  514. [    1.868916] ohci1394 0000:02:04.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
  515. [    1.887502] [drm] Initialized drm 1.1.0 20060810
  516. [    1.890919] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
  517. [    1.909660] [drm] radeon default to kernel modesetting DISABLED.
  518. [    1.909848]   alloc irq_desc for 17 on node 0
  519. [    1.909851]   alloc kstat_irqs on node 0
  520. [    1.909860] pci 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  521. [    1.909991] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:05.0 on minor 0
  522. [    1.932072] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]  MMIO=[fbffe000-fbffe7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
  523. [    1.937543] 8139cp 0000:02:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
  524. [    1.940310] 8139too Fast Ethernet driver 0.9.28
  525. [    1.940559]   alloc irq_desc for 20 on node 0
  526. [    1.940562]   alloc kstat_irqs on node 0
  527. [    1.940571] 8139too 0000:02:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
  528. [    1.942078] eth0: RealTek RTL8139 at 0xdf00, 00:13:d3:bb:03:19, IRQ 20
  529. [    2.112535] usb 3-2: new low speed USB device using ohci_hcd and address 2
  530. [    2.402621] usb 3-2: configuration #1 chosen from 1 choice
  531. [    2.418084] usbcore: registered new interface driver hiddev
  532. [    2.432052] input: Microsoft Microsoft Wireless Optical Desktop® 2.10 as /devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/input/input4
  533. [    2.432136] generic-usb 0003:045E:009F.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Desktop® 2.10] on usb-0000:00:13.1-2/input0
  534. [    2.432155] usbcore: registered new interface driver usbhid
  535. [    2.432158] usbhid: v2.6:USB HID core driver
  536. [    2.636585] xor: automatically using best checksumming function: generic_sse
  537. [    2.680011]    generic_sse:  6501.600 MB/sec
  538. [    2.680014] xor: using function: generic_sse (6501.600 MB/sec)
  539. [    2.692062] device-mapper: dm-raid45: initialized v0.2594b
  540. [    2.752531] usb 3-4: new full speed USB device using ohci_hcd and address 3
  541. [    2.985159] usb 3-4: configuration #1 chosen from 1 choice
  542. [    2.993682] Initializing USB Mass Storage driver...
  543. [    2.994937] scsi4 : SCSI emulation for USB Mass Storage devices
  544. [    2.995053] usb-storage: device found at 3
  545. [    2.995058] usb-storage: waiting for device to settle before scanning
  546. [    2.995061] usbcore: registered new interface driver usb-storage
  547. [    2.995064] USB Mass Storage support registered.
  548. [    3.252773] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0010dc0000d33060]
  549. [    7.943526] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
  550. [    7.943532] EXT4-fs (sda1): write access will be enabled during recovery
  551. [    7.967090] EXT4-fs (sda1): barriers enabled
  552. [    8.001124] usb-storage: device scan complete
  553. [    8.007074] scsi 4:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
  554. [    8.013069] scsi 4:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
  555. [    8.019069] scsi 4:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
  556. [    8.025067] scsi 4:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
  557. [    8.025494] sd 4:0:0:0: Attached scsi generic sg4 type 0
  558. [    8.025589] sd 4:0:0:1: Attached scsi generic sg5 type 0
  559. [    8.025685] sd 4:0:0:2: Attached scsi generic sg6 type 0
  560. [    8.025788] sd 4:0:0:3: Attached scsi generic sg7 type 0
  561. [    8.125071] sd 4:0:0:0: [sdc] Attached SCSI removable disk
  562. [    8.145076] sd 4:0:0:1: [sdd] Attached SCSI removable disk
  563. [    8.165069] sd 4:0:0:2: [sde] Attached SCSI removable disk
  564. [    8.185078] sd 4:0:0:3: [sdf] Attached SCSI removable disk
  565. [   13.176471] usplash:352 freeing invalid memtype ffffffffd8000000-ffffffffdc000000
  566. [   14.483690] kjournald2 starting: pid 486, dev sda1:8, commit interval 5 seconds
  567. [   14.483795] EXT4-fs (sda1): delayed allocation enabled
  568. [   14.483799] EXT4-fs: file extents enabled
  569. [   14.483912] EXT4-fs: mballoc enabled
  570. [   14.483934] EXT4-fs (sda1): orphan cleanup on readonly fs
  571. [   14.483946] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 215121
  572. [   14.484051] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1075
  573. [   14.484064] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1071
  574. [   14.484076] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1069
  575. [   14.484088] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1061
  576. [   14.484128] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 908
  577. [   14.484138] EXT4-fs (sda1): 6 orphan inodes deleted
  578. [   14.484141] EXT4-fs (sda1): recovery complete
  579. [   14.922392] EXT4-fs (sda1): mounted filesystem with ordered data mode
  580. [   15.583930] type=1505 audit(1275878556.275:2): operation="profile_load" pid=511 name=/sbin/dhclient3
  581. [   15.584234] type=1505 audit(1275878556.275:3): operation="profile_load" pid=511 name=/usr/lib/NetworkManager/nm-dhcp-client.action
  582. [   15.584404] type=1505 audit(1275878556.275:4): operation="profile_load" pid=511 name=/usr/lib/connman/scripts/dhclient-script
  583. [   15.645465] type=1505 audit(1275878556.335:5): operation="profile_load" pid=512 name=/usr/bin/evince
  584. [   15.650497] type=1505 audit(1275878556.335:6): operation="profile_load" pid=512 name=/usr/bin/evince-previewer
  585. [   15.653557] type=1505 audit(1275878556.345:7): operation="profile_load" pid=512 name=/usr/bin/evince-thumbnailer
  586. [   15.671703] type=1505 audit(1275878556.355:8): operation="profile_load" pid=514 name=/usr/lib/cups/backend/cups-pdf
  587. [   15.672075] type=1505 audit(1275878556.355:9): operation="profile_load" pid=514 name=/usr/sbin/cupsd
  588. [   15.696019] type=1505 audit(1275878556.385:10): operation="profile_load" pid=515 name=/usr/sbin/mysqld
  589. [   15.698412] type=1505 audit(1275878556.385:11): operation="profile_load" pid=516 name=/usr/sbin/ntpd
  590. [   16.677270] Adding 859436k swap on /dev/sda5.  Priority:-1 extents:1 across:859436k
  591. [   16.952717] EXT4-fs (sda1): internal journal on sda1:8
  592. [   17.001724] EXT4-fs (sdb1): barriers enabled
  593. [   17.874737] udev: starting version 147
  594. [   18.688643] RPC: Registered udp transport module.
  595. [   18.688647] RPC: Registered tcp transport module.
  596. [   18.872214] lp: driver loaded but no devices found
  597. [   19.130094] parport_pc 00:07: reported by Plug and Play ACPI
  598. [   19.130141] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
  599. [   19.182658] ppdev: user-space parallel port driver
  600. [   19.202709] lp0: using parport0 (interrupt-driven).
  601. [   19.319530] ip_tables: (C) 2000-2006 Netfilter Core Team
  602. [   20.114727] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  603. [   20.190882] EDAC MC: Ver: 2.1.0 Mar 24 2010
  604. [   20.525901] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  605. [   20.599587] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x500, revision 0
  606. [   20.950258] EDAC amd64_edac:  Ver: 3.2.0 Mar 24 2010
  607. [   20.950975] EDAC amd64: This node reports that Memory ECC is currently disabled.
  608. [   20.950982] EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled
  609. [   20.950985] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
  610. [   20.950987]     Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter.
  611. [   20.950988]     Might be a BIOS bug, if BIOS says ECC is enabled
  612. [   20.950990]     Use of the override can cause unknown side effects.
  613. [   20.951011] amd64_edac: probe of 0000:00:18.2 failed with error -22
  614. [   21.096104] Bluetooth: Generic Bluetooth USB driver ver 0.5
  615. [   21.096227] usbcore: registered new interface driver btusb
  616. [   21.154316] Linux video capture interface: v2.00
  617. [   21.352554] kjournald2 starting: pid 848, dev sdb1:8, commit interval 5 seconds
  618. [   21.353204] EXT4-fs (sdb1): internal journal on sdb1:8
  619. [   21.353210] EXT4-fs (sdb1): delayed allocation enabled
  620. [   21.353214] EXT4-fs: file extents enabled
  621. [   21.353530] EXT4-fs: mballoc enabled
  622. [   21.353555] EXT4-fs (sdb1): recovery complete
  623. [   21.354276] EXT4-fs (sdb1): mounted filesystem with ordered data mode
  624. [   21.422590] cfg80211: Calling CRDA to update world regulatory domain
  625. [   22.345474] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  626. [   22.345477] Bluetooth: BNEP filters: protocol multicast
  627. [   22.354574] ath5k 0000:02:02.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
  628. [   22.354634] ath5k 0000:02:02.0: registered as 'phy0'
  629. [   22.464151] cfg80211: World regulatory domain updated:
  630. [   22.464155]  (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  631. [   22.464159]  (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  632. [   22.464162]  (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  633. [   22.464165]  (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  634. [   22.464168]  (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  635. [   22.464170]  (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  636. [   22.509271] cx18:  Start initialization, version 1.2.0
  637. [   22.946087] ath: EEPROM regdomain: 0x0
  638. [   22.946090] ath: EEPROM indicates default country code should be used
  639. [   22.946092] ath: doing EEPROM country->regdmn map search
  640. [   22.946096] ath: country maps to regdmn code: 0x3a
  641. [   22.946098] ath: Country alpha2 being used: US
  642. [   22.946100] ath: Regpair used: 0x3a
  643. [   23.044121] Bridge firewalling registered
  644. [   23.926365] ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  645. [   23.982145] phy0: Selected rate control algorithm 'minstrel'
  646. [   23.982968] ath5k phy0: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45)
  647. [   23.983328] cfg80211: Calling CRDA for country: US
  648. [   23.986214] cfg80211: Regulatory domain changed to country: US
  649. [   23.986218]  (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  650. [   23.986222]  (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  651. [   23.986225]  (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
  652. [   23.986227]  (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  653. [   23.986230]  (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  654. [   23.986233]  (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
  655. [   23.989833] cx18-0: Initializing card 0
  656. [   23.989840] cx18-0: Autodetected Hauppauge card
  657. [   23.989951] cx18 0000:02:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
  658. [   23.991166] cx18-0: cx23418 revision 01010000 (B)
  659. [   24.237301] tveeprom 1-0050: Hauppauge model 74041, rev C6B2, serial# 5411482
  660. [   24.237307] tveeprom 1-0050: MAC address is 00-0D-FE-52-92-9A
  661. [   24.237310] tveeprom 1-0050: tuner model is TCL M2523_5N_E (idx 112, type 50)
  662. [   24.237314] tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
  663. [   24.237317] tveeprom 1-0050: audio processor is CX23418 (idx 38)
  664. [   24.237319] tveeprom 1-0050: decoder processor is CX23418 (idx 31)
  665. [   24.237322] tveeprom 1-0050: has no radio, has IR receiver, has IR transmitter
  666. [   24.237325] cx18-0: Autodetected Hauppauge HVR-1600
  667. [   24.237327] cx18-0: Simultaneous Digital and Analog TV capture supported
  668. [   24.343688] IRQ 21/cx18-0: IRQF_DISABLED is not guaranteed on shared IRQs
  669. [   24.542983] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  670. [   24.544530] eth0: link down
  671. [   24.544944] ADDRCONF(NETDEV_UP): eth0: link is not ready
  672. [   24.757195] tuner 2-0061: chip found @ 0xc2 (cx18 i2c driver #0-1)
  673. [   25.068442] cs5345 1-004c: chip found @ 0x98 (cx18 i2c driver #0-0)
  674. [   25.308295] tuner-simple 2-0061: creating new instance
  675. [   25.308301] tuner-simple 2-0061: type set to 50 (TCL 2002N)
  676. [   25.309874] cx18-0: Registered device video0 for encoder MPEG (64 x 32 kB)
  677. [   25.309878] DVB: registering new adapter (cx18)
  678. [   25.561456] MXL5005S: Attached at address 0x63
  679. [   25.561466] DVB: registering adapter 0 frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)...
  680. [   25.561601] cx18-0: DVB Frontend registered
  681. [   25.561604] cx18-0: Registered DVB adapter0 for TS (32 x 32 kB)
  682. [   25.561642] cx18-0: Registered device video32 for encoder YUV (16 x 128 kB)
  683. [   25.561668] cx18-0: Registered device vbi0 for encoder VBI (20 x 51984 bytes)
  684. [   25.561694] cx18-0: Registered device video24 for encoder PCM audio (256 x 4 kB)
  685. [   25.561697] cx18-0: Initialized card: Hauppauge HVR-1600
  686. [   25.562392] cx18:  End initialization
  687. [   25.612647] cx18 0000:02:01.0: firmware: requesting v4l-cx23418-cpu.fw
  688. [   26.211203] sr 3:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  689. [   26.211209] sr 3:0:0:0: [sr0] Sense Key : Illegal Request [current]
  690. [   26.211214] sr 3:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
  691. [   26.211224] end_request: I/O error, dev sr0, sector 15517184
  692. [   26.211348] __ratelimit: 3 callbacks suppressed
  693. [   26.211351] Buffer I/O error on device sr0, logical block 1939648
  694. [   26.332075] cx18-0: loaded v4l-cx23418-cpu.fw firmware (158332 bytes)
  695. [   26.374786] cx18 0000:02:01.0: firmware: requesting v4l-cx23418-apu.fw
  696. [   26.381066] sr 3:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  697. [   26.381073] sr 3:0:0:0: [sr0] Sense Key : Illegal Request [current]
  698. [   26.381078] sr 3:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
  699. [   26.381087] end_request: I/O error, dev sr0, sector 15517184
  700. [   26.381131] Buffer I/O error on device sr0, logical block 1939648
  701. [   26.437381] sr 3:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  702. [   26.437387] sr 3:0:0:0: [sr0] Sense Key : Illegal Request [current]
  703. [   26.437392] sr 3:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
  704. [   26.437401] end_request: I/O error, dev sr0, sector 15517120
  705. [   26.437527] Buffer I/O error on device sr0, logical block 1939640
  706. [   26.441051] sr 3:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  707. [   26.441056] sr 3:0:0:0: [sr0] Sense Key : Illegal Request [current]
  708. [   26.441060] sr 3:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
  709. [   26.441067] end_request: I/O error, dev sr0, sector 15517120
  710. [   26.441189] Buffer I/O error on device sr0, logical block 1939640
  711. [   26.520927] sr 3:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  712. [   26.520932] sr 3:0:0:0: [sr0] Sense Key : Illegal Request [current]
  713. [   26.520937] sr 3:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
  714. [   26.520947] end_request: I/O error, dev sr0, sector 15517128
  715. [   26.521078] Buffer I/O error on device sr0, logical block 1939641
  716. [   26.521209] Buffer I/O error on device sr0, logical block 1939642
  717. [   26.521340] Buffer I/O error on device sr0, logical block 1939643
  718. [   26.521469] Buffer I/O error on device sr0, logical block 1939644
  719. [   26.524780] sr 3:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  720. [   26.524786] sr 3:0:0:0: [sr0] Sense Key : Illegal Request [current]
  721. [   26.524790] sr 3:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
  722. [   26.524800] end_request: I/O error, dev sr0, sector 15517128
  723. [   26.524988] Buffer I/O error on device sr0, logical block 1939641
  724. [   26.574390] cx18-0: loaded v4l-cx23418-apu.fw firmware V00120000 (141200 bytes)
  725. [   26.580751] cx18-0: FW version: 0.0.74.0 (Release 2007/03/12)
  726. [   26.817716] cx18 0000:02:01.0: firmware: requesting v4l-cx23418-cpu.fw
  727. [   27.064129] cx18 0000:02:01.0: firmware: requesting v4l-cx23418-apu.fw
  728. [   27.464350] cx18 0000:02:01.0: firmware: requesting v4l-cx23418-dig.fw
  729. [   27.578393] type=1505 audit(1275878568.265:13): operation="profile_replace" pid=1255 name=/sbin/dhclient3
  730. [   27.857650] cx18-0 843: loaded v4l-cx23418-dig.fw firmware (16382 bytes)
  731. [   27.895559] cx18-0 843: verified load of v4l-cx23418-dig.fw firmware (16382 bytes)
  732. [   32.242758] __ratelimit: 30 callbacks suppressed
  733. [   32.242762] type=1503 audit(1275878572.932:24): operation="open" pid=1381 parent=1380 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
  734. [   33.217241] type=1503 audit(1275878573.902:25): operation="open" pid=1414 parent=1413 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
  735. [   33.762872] wlan0: authenticate with AP 00:21:29:bb:31:a0
  736. [   33.765164] wlan0: authenticated
  737. [   33.765170] wlan0: associate with AP 00:21:29:bb:31:a0
  738. [   33.770780] wlan0: RX AssocResp from 00:21:29:bb:31:a0 (capab=0x411 status=0 aid=2)
  739. [   33.770785] wlan0: associated
  740. [   33.771661] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  741. [   34.101859] type=1503 audit(1275878574.792:26): operation="open" pid=1538 parent=1421 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
  742. [   34.516811] type=1503 audit(1275878575.202:27): operation="open" pid=1544 parent=1543 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
  743. [   35.532832] type=1503 audit(1275878576.222:28): operation="open" pid=1562 parent=1561 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
  744. [   36.552954] type=1503 audit(1275878577.242:29): operation="open" pid=1574 parent=1573 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
  745. [   37.992216] type=1503 audit(1275878578.675:30): operation="open" pid=1635 parent=1634 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
  746. [   38.032402] type=1503 audit(1275878578.715:31): operation="open" pid=1649 parent=1648 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
  747. [   39.725981] svc: failed to register lockdv1 RPC service (errno 97).
  748. [   39.726954] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
  749. [   39.795380] NFSD: starting 90-second grace period
  750. [   43.753141] [drm] Setting GART location based on new memory map
  751. [   43.753409] [drm] Loading R300 Microcode
  752. [   43.753427] [drm] Num pipes: 4
  753. [   43.753433] [drm] writeback test succeeded in 1 usecs
  754. [   43.952519] wlan0: no IPv6 routers present
  755. [   50.605455] sr 3:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  756. [   50.605461] sr 3:0:0:0: [sr0] Sense Key : Illegal Request [current]
  757. [   50.605466] sr 3:0:0:0: [sr0] Add. Sense: Read of scrambled sector without authentication
  758. [   50.605476] end_request: I/O error, dev sr0, sector 4808
  759. [   50.605481] Buffer I/O error on device sr0, logical block 601
  760. [   50.605487] Buffer I/O error on device sr0, logical block 602
  761. [   50.605491] Buffer I/O error on device sr0, logical block 603
  762. [   50.605494] Buffer I/O error on device sr0, logical block 604
  763. [   50.605497] Buffer I/O error on device sr0, logical block 605
  764. [   50.605500] Buffer I/O error on device sr0, logical block 606
  765. [   50.605503] Buffer I/O error on device sr0, logical block 607
  766. [   50.605506] Buffer I/O error on device sr0, logical block 608
  767. [   50.605509] Buffer I/O error on device sr0, logical block 609
  768. [   50.605512] Buffer I/O error on device sr0, logical block 610
  769. [  109.870038] Clocksource tsc unstable (delta = -248314822 ns)
create new paste | create new version of this paste RAW Paste Data