API tools faq
paste
Advertisement
Guest User

h3-olinuxino-nano.fex for low temperatures/consumption

a guest
Jul 11th, 2016
164
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 49.90 KB | None | 0 0
raw download clone embed print report
  1. [product]
  2. version = "100"
  3. machine = "h3-olinuxino-nano"
  4.  
  5. ;---------------------------------------------------------------------------------------------------------
  6. ; eraseflag - 1 erase data partition, 0 - do not erase data partition
  7. ; next_work - action after burn, 0x0 by config, 0x1, normal, 0x2 reboot 0x3 ,shutdown,0x4 reupdate ,0x5 boot
  8. ;---------------------------------------------------------------------------------------------------------
  9. [platform]
  10. debug_mode = 1
  11. eraseflag = 1
  12. next_work = 2
  13.  
  14. ;----------------------------------------------------------------------------------
  15. ;[target] system bootup configuration
  16. ;boot_clock = CPU boot frequency, Unit: MHz
  17. ;storage_type = boot medium, 0-nand, 1-card0, 2-card2, -1(defualt)auto scan
  18. ;----------------------------------------------------------------------------------
  19. [target]
  20. boot_clock = 816
  21. storage_type = -1
  22.  
  23. ;---------------------------------------------------------------------------------
  24. ; uboot key detect enable
  25. ; 当keyen_flag = 1 时，支持按键检测
  26. ; 当keyen_flag = 0 时，不支持
  27. ;---------------------------------------------------------------------------------
  28. [key_detect_en]
  29. keyen_flag = 0
  30.  
  31. ;---------------------------------------------------------------------------------
  32. ;"一键进烧写功能"的按键值配置，按住位于min~max范围内的按键都可以强制进烧写
  33. ; fel_key_max用于配置按键的最大键值
  34. ; fel_key_min用于配置按键的最小键值
  35. ;---------------------------------------------------------------------------------
  36. [fel_key]
  37. fel_key_max =07
  38. fel_key_min =02
  39.  
  40. ;----------------------------------------------------------------------------------
  41. ;card boot
  42. ;logical_start用于配置启动卡上mbr的位置相对于SD卡sector 0的偏移，单位为sector(512byte)
  43. ;sprite_gpio0用于配置卡量产时指示灯所用的gpio
  44. ;----------------------------------------------------------------------------------
  45. ;-------------------------------------------------------------------------------
  46. ; sprite_work_delay :
  47. ; sprite_err_delay :
  48. ; sprite_gpio0 ： 卡量产、一键recovery状态指示灯
  49. ; next_work ： 卡量产完成，工作状态(默认关机)
  50. ;-------------------------------------------------------------------------------
  51. [card_boot]
  52. logical_start = 40960
  53. sprite_work_delay = 500
  54. sprite_err_delay = 200
  55. sprite_gpio0 = port:PL10<1><default><default><default>
  56. next_work = 3
  57.  
  58. ;---------------------------------------------------------------------------------
  59. ; used : 1: used this config, 0: not
  60. ; start_type : 1: start system directly when power supply, 0: wait IR/KEY to power on
  61. ; irkey_used : 1: ir key used, 0: not
  62. ; pmukey_used: 1: physical button used, 0: not
  63. ; pmukey_num : the index of gpio, only support PL
  64. ; led_power : 1: light, 0: off, the control gpio is PL10
  65. ; led_state : 1: light, 0: off, default is 0
  66. ;---------------------------------------------------------------------------------
  67. [box_start_os]
  68. used = 1
  69. start_type = 1
  70. irkey_used = 1
  71. pmukey_used = 1
  72. pmukey_num = 3
  73. led_power = 0
  74. led_state = 0
  75.  
  76. ;-------------------------------------------------------------------------------
  77. ; boot阶段上电初始化GPIO
  78. ; used :模块使能端 置1：开启模块 置0：关闭模块
  79. ; gpiox ：上电初始化gpio （名称自定，但不能重复，并且GPIO允许可以多个）
  80. ; PH06 : 系统显示LED GPIO
  81. ;-------------------------------------------------------------------------------
  82. [boot_init_gpio]
  83. used = 1
  84. gpio0 = port:PL10<1><default><default><1>
  85. gpio1 = port:PA15<1><default><default><1>
  86.  
  87. ;----------------------------------------------------------------------------------
  88. ; used: 模块使能端 1：开启模块 0：关闭模块
  89. ; mode: 模式选择 1：一键进入OTA升级 2：一键恢复（通过sysrecovery分区来恢复） 其他值：无效
  90. ; recovery_key ： 按键配置 （例如：recovery_key= port:PH16<0><default>）
  91. ;----------------------------------------------------------------------------------
  92. [recovery_para]
  93. used = 1
  94. mode = 2
  95. recovery_key = port:PL01<0><default><default><default>
  96.  
  97.  
  98. ;---------------------------------------------------------------------------------------------------------
  99. ; if 1 == standby_mode, then support super standby;
  100. ; else, support normal standby.
  101. ;---------------------------------------------------------------------------------------------------------
  102. [pm_para]
  103. standby_mode = 1
  104.  
  105. [card0_boot_para]
  106. card_ctrl = 0
  107. card_high_speed = 1
  108. card_line = 4
  109. sdc_d1 = port:PF00<2><1><2><default>
  110. sdc_d0 = port:PF01<2><1><2><default>
  111. sdc_clk = port:PF02<2><1><2><default>
  112. sdc_cmd = port:PF03<2><1><2><default>
  113. sdc_d3 = port:PF04<2><1><2><default>
  114. sdc_d2 = port:PF05<2><1><2><default>
  115.  
  116. [card2_boot_para]
  117. card_ctrl = 2
  118. card_high_speed = 1
  119. card_line = 8
  120. sdc_cmd = port:PC06<3><1><2><default>
  121. sdc_clk = port:PC05<3><1><2><default>
  122. sdc_d0 = port:PC08<3><1><2><default>
  123. sdc_d1 = port:PC09<3><1><2><default>
  124. sdc_d2 = port:PC10<3><1><2><default>
  125. sdc_d3 = port:PC11<3><1><2><default>
  126. sdc_d4 = port:PC12<3><1><2><default>
  127. sdc_d5 = port:PC13<3><1><2><default>
  128. sdc_d6 = port:PC14<3><1><2><default>
  129. sdc_d7 = port:PC15<3><1><2><default>
  130. sdc_2xmode = 1
  131. sdc_ddrmode = 1
  132.  
  133. [twi_para]
  134. twi_port = 0
  135. twi_scl = port:PA11<2><default><default><default>
  136. twi_sda = port:PA12<2><default><default><default>
  137.  
  138. [uart_para]
  139. uart_debug_port = 0
  140. uart_debug_tx = port:PA04<2><1><default><default>
  141. uart_debug_rx = port:PA05<2><1><default><default>
  142.  
  143. [force_uart_para]
  144. force_uart_port = 0
  145. force_uart_tx = port:PF02<3><1><default><default>
  146. force_uart_rx = port:PF04<3><1><default><default>
  147.  
  148. [jtag_para]
  149. jtag_enable = 0
  150. jtag_ms = port:PA00<3><default><default><default>
  151. jtag_ck = port:PA01<3><default><default><default>
  152. jtag_do = port:PA02<3><default><default><default>
  153. jtag_di = port:PA03<3><default><default><default>
  154.  
  155. [clock]
  156. pll_video = 297
  157. pll_ve = 402
  158. pll_periph0 = 600
  159. pll_gpu = 576
  160. pll_periph1 = 600
  161. pll_de = 864
  162.  
  163. ;*****************************************************************************
  164. ;sdram configuration
  165. ;
  166. ; dram_tpr7[31:31]=1, use gpio type to detect dram type and
  167. ; dram_tpr7[31:31]=0, not use gpio type to detect dram type.
  168. ;
  169. ; if set ddr type auto detect, use dram_tpr7 to set dram clk.
  170. ; for example: if dram_tpr13[13:13] = 1, it use
  171. ; dram_tpr7[29:20] to set lpddr2 clk,
  172. ; dram_tpr7[19:10] to set lpddr3 clk,
  173. ; dram_tpr7[9:0] to set ddr3 or ddr3l clk.
  174. ;*****************************************************************************
  175. [dram_para]
  176. dram_clk = 624
  177. dram_type = 3
  178. dram_zq = 0x3b3bfb
  179. dram_odt_en = 0x1
  180. dram_para1 = 0x10E40000
  181. dram_para2 = 0x0000
  182. dram_mr0 = 0x1840
  183. dram_mr1 = 0x40
  184. dram_mr2 = 0x18
  185. dram_mr3 = 0x2
  186. dram_tpr0 = 0x0048A192
  187. dram_tpr1 = 0x01C2418D
  188. dram_tpr2 = 0x00076051
  189. dram_tpr3 = 0
  190. dram_tpr4 = 0
  191. dram_tpr5 = 0
  192. dram_tpr6 = 100
  193. dram_tpr7 = 0
  194. dram_tpr8 = 0
  195. dram_tpr9 = 0
  196. dram_tpr10 = 0
  197. dram_tpr11 = 0x6aaa0000
  198. dram_tpr12 = 0x7979
  199. dram_tpr13 = 0x800800
  200. ;----------------------------------------------------------------------------------
  201. ;os life cycle para configuration
  202. ;----------------------------------------------------------------------------------
  203.  
  204. ;---------------------------------------------------------------------------------------------------------
  205. ; wakeup_src_para:
  206. ; sometimes, u would like to add more wakeup src in standby mode, these para will be
  207. ; help;
  208. ; u need to make sure the standby mode support the wakeup src. Also, some hw
  209. ; condition must be guaranteed.
  210. ; including:
  211. ; cpu_en: power on or off.
  212. ; 1: mean power on
  213. ; 0: mean power off
  214. ; cpu_freq: indicating lowest freq. unit is Mhz;
  215. ; dram selfresh_en: selfresh or not.
  216. ; 1: enable enter selfresh
  217. ; 0: disable enter selfresh
  218. ; dram_pll: if not enter selfresh, indicating lowest freq. unit is Mhz;
  219. ; wakeup_src: to make the scenario work, the wakeup src is needed.
  220. ;---------------------------------------------------------------------------------------------------------
  221. [wakeup_src_para]
  222. cpu_en = 0
  223. cpu_freq = 48
  224. ; (cpu:apb:ahb)
  225. pll_ratio = 0x111
  226. dram_selfresh_en = 1
  227. dram_freq = 36
  228. wakeup_src0 =
  229. wakeup_src_wl = port:PG10<4><default><default><0>
  230. wakeup_src_bt = port:PL03<6><default><default><0>
  231.  
  232. ;----------------------------------------------------------------------------------
  233. ;i2c configuration
  234. ;----------------------------------------------------------------------------------
  235. [twi0]
  236. twi_used = 1
  237. twi_scl = port:PA11<2><default><default><default>
  238. twi_sda = port:PA12<2><default><default><default>
  239.  
  240. [twi1]
  241. twi_used = 1
  242. twi_scl = port:PA18<3><default><default><default>
  243. twi_sda = port:PA19<3><default><default><default>
  244.  
  245. [twi2]
  246. twi_used = 0
  247. twi_scl = port:PE12<3><default><default><default>
  248. twi_sda = port:PE13<3><default><default><default>
  249.  
  250. ;----------------------------------------------------------------------------------
  251. ;uart configuration
  252. ;uart_type --- 2 (2 wire), 4 (4 wire), 8 (8 wire, full function)
  253. ;----------------------------------------------------------------------------------
  254. [uart0]
  255. uart_used = 1
  256. uart_port = 0
  257. uart_type = 2
  258. uart_tx = port:PA04<2><1><default><default>
  259. uart_rx = port:PA05<2><1><default><default>
  260.  
  261. [uart1]
  262. uart_used = 1
  263. uart_port = 1
  264. uart_type = 4
  265. uart_tx = port:PG06<2><1><default><default>
  266. uart_rx = port:PG07<2><1><default><default>
  267. uart_rts = port:PG08<2><1><default><default>
  268. uart_cts = port:PG09<2><1><default><default>
  269.  
  270. [uart2]
  271. uart_used = 1
  272. uart_port = 2
  273. uart_type = 4
  274. uart_tx = port:PA00<2><1><default><default>
  275. uart_rx = port:PA01<2><1><default><default>
  276. uart_rts = port:PA02<2><1><default><default>
  277. uart_cts = port:PA03<2><1><default><default>
  278.  
  279. [uart3]
  280. uart_used = 1
  281. uart_port = 3
  282. uart_type = 2
  283. uart_tx = port:PA13<3><1><default><default>
  284. uart_rx = port:PA14<3><1><default><default>
  285. uart_rts = port:PA15<3><1><default><default>
  286. uart_cts = port:PA16<3><1><default><default>
  287.  
  288. ;----------------------------------------------------------------------------------
  289. ;SPI controller configuration
  290. ;----------------------------------------------------------------------------------
  291. [spi0]
  292. spi_used = 1
  293. spi_cs_bitmap = 1
  294. spi_mosi = port:PC00<3><default><default><default>
  295. spi_miso = port:PC01<3><default><default><default>
  296. spi_sclk = port:PC02<3><default><default><default>
  297. spi_cs0 = port:PC03<3><1><default><default>
  298.  
  299. [spi1]
  300. spi_used = 0
  301. spi_cs_bitmap = 1
  302. spi_cs0 = port:PA13<2><1><default><default>
  303. spi_sclk = port:PA14<2><default><default><default>
  304. spi_mosi = port:PA15<2><default><default><default>
  305. spi_miso = port:PA16<2><default><default><default>
  306.  
  307. ;----------------------------------------------------------------------------------
  308. ;SPI device configuration
  309. ;----------------------------------------------------------------------------------
  310. [spi_devices]
  311. spi_dev_num = 1
  312.  
  313. [spi_board0]
  314. modalias = "spidev"
  315. max_speed_hz = 33000000
  316. bus_num = 0
  317. chip_select = 0
  318. mode = 0
  319. full_duplex = 1
  320. manual_cs = 0
  321.  
  322. ;----------------------------------------------------------------------------------
  323. ;userspace gpio interface
  324. ; ** COMMENT THE PINS USED IN OTHER INTERFACES (I2C, SPI, 1-WIRE...)
  325. ;----------------------------------------------------------------------------------
  326. [gpio_para]
  327. gpio_used = 1
  328. gpio_num = 27
  329. gpio_pin_1 = port:PA12<1><default><default><0>
  330. gpio_pin_2 = port:PA11<1><default><default><0>
  331. gpio_pin_3 = port:PA06<1><default><default><0>
  332. gpio_pin_4 = port:PA13<1><default><default><0>
  333. gpio_pin_5 = port:PA14<1><default><default><0>
  334. gpio_pin_6 = port:PA01<1><default><default><0>
  335. gpio_pin_7 = port:PA16<1><default><default><0>
  336. gpio_pin_8 = port:PA00<1><default><default><0>
  337. gpio_pin_9 = port:PA03<1><default><default><0>
  338. ;gpio_pin_10 = port:PA15<1><default><default><0>
  339. gpio_pin_10 = port:PC04<1><default><default><0>
  340. gpio_pin_11 = port:PC00<1><default><default><0>
  341. gpio_pin_12 = port:PC01<1><default><default><0>
  342. gpio_pin_13 = port:PA02<1><default><default><0>
  343. gpio_pin_14 = port:PC02<1><default><default><0>
  344. gpio_pin_15 = port:PC03<1><default><default><0>
  345. gpio_pin_16 = port:PC07<1><default><default><0>
  346. gpio_pin_17 = port:PA19<1><default><default><0>
  347. gpio_pin_18 = port:PA18<1><default><default><0>
  348. gpio_pin_19 = port:PA07<1><default><default><0>
  349. gpio_pin_20 = port:PA08<1><default><default><0>
  350. gpio_pin_21 = port:PL02<1><default><default><0>
  351. gpio_pin_22 = port:PA09<1><default><default><0>
  352. gpio_pin_23 = port:PA10<1><default><default><0>
  353. gpio_pin_24 = port:PL04<1><default><default><0>
  354. gpio_pin_25 = port:PA16<1><default><default><0>
  355. gpio_pin_26 = port:PA21<1><default><default><0>
  356. gpio_pin_27 = port:PA20<1><default><default><0>
  357.  
  358. [leds_para]
  359. leds_used = 1
  360. red_led = port:PL10<1><default><default><1>
  361. red_led_active_low = 0
  362.  
  363. ;----------------------------------------------------------------------------------
  364. ;thermal configuration
  365. ;ths_trip_count : temperature trigger number
  366. ;ths_trip_0 : first temperature trigger
  367. ;ths_trip_1 : second temperature trigger
  368. ;ths_trip_2 : third temperature trigger, when upto this temperature, system shutdown
  369. ;ths_trip_0_min : first temperature trigger's min freq
  370. ;ths_trip_0_max : first temperature trigger's max freq
  371. ;ths_trip_1_min : second temperature trigger's min freq
  372. ;ths_trip_1_max : second temperature trigger's max freq
  373. ;----------------------------------------------------------------------------------
  374.  
  375. [ths_para]
  376. ths_used = 1
  377. ths_trip1_count = 8
  378. ths_trip1_0 = 65
  379. ths_trip1_1 = 68
  380. ths_trip1_2 = 71
  381. ths_trip1_3 = 74
  382. ths_trip1_4 = 77
  383. ths_trip1_5 = 80
  384. ths_trip1_6 = 83
  385. ths_trip1_7 = 90
  386. ths_trip1_0_min = 0
  387. ths_trip1_0_max = 1
  388. ths_trip1_1_min = 1
  389. ths_trip1_1_max = 2
  390. ths_trip1_2_min = 2
  391. ths_trip1_2_max = 3
  392. ths_trip1_3_min = 3
  393. ths_trip1_3_max = 4
  394. ths_trip1_4_min = 4
  395. ths_trip1_4_max = 6
  396. ths_trip1_5_min = 6
  397. ths_trip1_5_max = 8
  398. ths_trip1_6_min = 8
  399. ths_trip1_6_max = 10
  400. ths_trip1_7_min = 0
  401. ths_trip1_7_max = 0
  402. ths_trip2_count = 1
  403. ths_trip2_0 = 90
  404.  
  405. ;----------------------------------------------------------------------------------
  406. ;cooler_table cooler_count <=32
  407. ;----------------------------------------------------------------------------------
  408.  
  409. [cooler_table]
  410. cooler_count = 9
  411. cooler0 = "816000 4 4294967295 0"
  412. cooler1 = "720000 4 4294967295 0"
  413. cooler2 = "648000 4 4294967295 0"
  414. cooler3 = "480000 4 4294967295 0"
  415. cooler4 = "312000 4 4294967295 0"
  416. cooler5 = "240000 4 4294967295 0"
  417. cooler6 = "240000 3 4294967295 0"
  418. cooler7 = "240000 2 4294967295 0"
  419. cooler8 = "240000 1 4294967295 0"
  420.  
  421. [nand0_para]
  422. nand_support_2ch = 0
  423.  
  424. nand0_used = 0
  425. nand0_we = port:PC00<2><default><default><default>
  426. nand0_ale = port:PC01<2><default><default><default>
  427. nand0_cle = port:PC02<2><default><default><default>
  428. nand0_ce1 = port:PC03<2><default><default><default>
  429. nand0_ce0 = port:PC04<2><default><default><default>
  430. nand0_nre = port:PC05<2><default><default><default>
  431. nand0_rb0 = port:PC06<2><default><default><default>
  432. nand0_rb1 = port:PC07<2><default><default><default>
  433. nand0_d0 = port:PC08<2><default><default><default>
  434. nand0_d1 = port:PC09<2><default><default><default>
  435. nand0_d2 = port:PC10<2><default><default><default>
  436. nand0_d3 = port:PC11<2><default><default><default>
  437. nand0_d4 = port:PC12<2><default><default><default>
  438. nand0_d5 = port:PC13<2><default><default><default>
  439. nand0_d6 = port:PC14<2><default><default><default>
  440. nand0_d7 = port:PC15<2><default><default><default>
  441. nand0_ndqs = port:PC16<2><default><default><default>
  442.  
  443.  
  444. ;-----------------------------------------------------------------
  445. ;auto_hpd - 1:need hotplud for hdmi/tv; 0:don't hotplud for lcd
  446. ;output_type - 0:none; 1:lcd; 2:tv; 4:hdmi; 8:vga (as default config in homlet)
  447. ;hdmi_channel- the display channel for hdmi (as default config in homlet)
  448. ;cvbs_channel- the display channel for cvbs (as default config in homlet)
  449. ;hdmi_mode - as default config for output of hdmi in homlet
  450. ;cvbs_mode - as default config for output of tv in homlet. 11:PAL; 14:NTSC
  451. ;check the definition(of hdmi/cvbs_mode) of disp_tv_mode in sunxi_display2.h
  452. ;hdmi_mode_check - disable/enable the function of checking hdmi mode, 0 is disable, 1 is enable
  453. ;-----------------------------------------------------------------
  454. [boot_disp]
  455. advert_disp = 0
  456. auto_hpd = 1
  457. output_type = 4
  458. hdmi_channel = 0
  459. hdmi_mode = 4
  460. cvbs_channel = 1
  461. cvbs_mode = 11
  462. output_full = 1
  463. hdmi_mode_check = 1
  464.  
  465. ;----------------------------------------------------------------------------------
  466. ;disp init configuration
  467. ;
  468. ;disp_mode (0:screen0<screen0,fb0>; 1:screen1<screen1,fb0>)
  469. ;screenx_output_type (0:none; 1:lcd; 3:hdmi;)
  470. ;screenx_output_mode (used for hdmi output, 0:480i 1:576i 2:480p 3:576p 4:720p50)
  471. ; (5:720p60 6:1080i50 7:1080i60 8:1080p24 9:1080p50 10:1080p60)
  472. ;fbx format (0:ARGB 1:ABGR 2:RGBA 3:BGRA 5:RGB565 8:RGB888 12:ARGB4444 16:ARGB1555 18:RGBA5551)
  473. ;fbx_width,fbx_height (framebuffer horizontal/vertical pixels, fix to output resolution while equal 0)
  474. ;lcdx_backlight (lcd init backlight,the range:[0,256],default:197
  475. ;----------------------------------------------------------------------------------
  476. [disp_init]
  477. disp_init_enable = 1
  478. disp_mode = 0
  479.  
  480. screen0_output_type = 3
  481. screen0_output_mode = 5
  482.  
  483. screen1_output_type = 3
  484. screen1_output_mode = 5
  485.  
  486. fb0_format = 0
  487. fb0_width = 0
  488. fb0_height = 0
  489.  
  490. fb1_format = 0
  491. fb1_width = 0
  492. fb1_height = 0
  493.  
  494. fb0_framebuffer_num = 3
  495. sunxi_fb_mem_reserve = 32
  496.  
  497. ;----------------------------------------------------------------------------------
  498. ;hdmi configuration
  499. ;----------------------------------------------------------------------------------
  500. [hdmi_para]
  501. hdmi_used = 1
  502. hdmi_power = "vcc-hdmi-18"
  503. ;-------------------------------------
  504. ; set to 0 for hdmi->dvi compatibility
  505. ;-------------------------------------
  506. ;hdcp_enable = 0
  507. ;hdmi_cts_compatibility = 1
  508.  
  509. [tv_para]
  510. tv_used = 0
  511. tv_dac_used = 1
  512. tv_dac_src0 = 0
  513.  
  514. ;----------------------------------------------------------------------------------
  515. ;pwm config
  516. ;----------------------------------------------------------------------------------
  517. [pwm0_para]
  518. pwm_used = 0
  519. pwm_positive = port:PA05<3><0><default><default>
  520.  
  521. ;------------------------------------------------------------------------------;
  522. ; 10/100/100Mbps Ethernet MAC Controller Configure ;
  523. ;------------------------------------------------------------------------------;
  524. ; Options: ;
  525. ; gmac_used --- 0: not used, 1: external phy, 2: internal phy ;
  526. ; gmac_powerx -- A[:B] A: axp channel, B: voltage value ;
  527. ; If set gamc_phy to use internal PHY, do not config port ;
  528. ;------------------------------------------------------------------------------;
  529. ; MII RMII MII RMII MII RMII ;
  530. ; PD00 * PD06 * * PD12 * * ;
  531. ; PD01 * PD07 * PD13 * * ;
  532. ; PD02 * * PD08 * PD14 * ;
  533. ; PD03 * * PD09 * * PD15 * ;
  534. ; PD04 * PD10 * * PD16 * * ;
  535. ; PD05 * PD11 * * PD17 * * ;
  536. ;------------------------------------------------------------------------------;
  537. [gmac0]
  538. gmac_used = 2
  539. ;gmac_rxd3 = port:PD00<2><default><3><default>
  540. ;gmac_rxd2 = port:PD01<2><default><3><default>
  541. ;gmac_rxd1 = port:PD02<2><default><3><default>
  542. ;gmac_rxd0 = port:PD03<2><default><3><default>
  543. ;gmac_rxclk = port:PD04<2><default><3><default>
  544. ;gmac_rxdv = port:PD05<2><default><3><default>
  545. ;;gmac_rxerr = port:PD06<2><default><3><default>
  546. ;gmac_txd3 = port:PD07<2><default><3><default>
  547. ;gmac_txd2 = port:PD08<2><default><3><default>
  548. ;gmac_txd1 = port:PD09<2><default><3><default>
  549. ;gmac_txd0 = port:PD10<2><default><3><default>
  550. ;;gmac_crs = port:PD11<2><default><3><default>
  551. ;gmac_txclk = port:PD12<2><default><3><default>
  552. ;gmac_txen = port:PD13<2><default><3><default>
  553. ;;gmac_txerr = port:PD14<2><default><3><default>
  554. ;gmac_col = port:PD15<2><default><3><default>
  555. ;gmac_mdc = port:PD16<2><default><3><default>
  556. ;gmac_mdio = port:PD17<2><default><3><default>
  557. gmac_power1 =
  558. ;
  559. ;[gmac_phy_power]
  560. ;gmac_phy_power_en = port:PD06<1><default><default><0>
  561.  
  562. ;--------------------------------------------------------------------------------
  563. ;vip (video input port) configuration
  564. ;vip_used: 0:disable 1:enable
  565. ;vip_mode: 0:sample one interface to one buffer 1:sample two interface to one buffer
  566. ;vip_dev_qty: The quantity of devices linked to capture bus
  567. ;
  568. ;vip_define_sensor_list: If you want use sensor detect function, please set vip_define_sensor_list = 1, and
  569. ; verify that file /system/etc/hawkview/sensor_list_cfg.ini is properly configured!
  570. ;
  571. ;vip_dev(x)_pos: sensor position, "rear" or "front", if vip_define_sensor_list = 1,
  572. ;vip_dev(x)_pos must be configured!
  573. ;
  574. ;vip_dev(x)_isp_used 0:not use isp 1:use isp
  575. ;vip_dev(x)_fmt: 0:yuv 1:bayer raw rgb
  576. ;vip_dev(x)_stby_mode: 0:not shut down power at standby 1:shut down power at standby
  577. ;vip_dev(x)_vflip: flip in vertical direction 0:disable 1:enable
  578. ;vip_dev(x)_hflip: flip in horizontal direction 0:disable 1:enable
  579. ;vip_dev(x)_iovdd: camera module io power handle string, pmu power supply
  580. ;vip_dev(x)_iovdd_vol: camera module io power voltage, pmu power supply
  581. ;vip_dev(x)_avdd: camera module analog power handle string, pmu power supply
  582. ;vip_dev(x)_avdd_vol: camera module analog power voltage, pmu power supply
  583. ;vip_dev(x)_dvdd: camera module core power handle string, pmu power supply
  584. ;vip_dev(x)_dvdd_vol: camera module core power voltage, pmu power supply
  585. ;vip_dev(x)_afvdd: camera module vcm power handle string, pmu power supply
  586. ;vip_dev(x)_afvdd_vol: camera module vcm power voltage, pmu power supply
  587. ;x indicates the index of the devices which are linked to the same capture bus
  588. ;fill voltage in uV, e.g. iovdd = 2.8V, vip_devx_iovdd_vol = 2800000
  589. ;fill handle string as below:
  590. ;axp22_eldo3
  591. ;axp22_dldo4
  592. ;axp22_eldo2
  593. ;fill handle string "" when not using any pmu power supply
  594. ;--------------------------------------------------------------------------------
  595.  
  596. [csi0]
  597.  
  598. vip_used = 1
  599. vip_mode = 0
  600. vip_dev_qty = 1
  601. vip_define_sensor_list = 0
  602.  
  603. vip_csi_pck = port:PE00<2><default><default><default>
  604. vip_csi_mck = port:PE01<2><default><default><default>
  605. vip_csi_hsync = port:PE02<2><default><default><default>
  606. vip_csi_vsync = port:PE03<2><default><default><default>
  607. vip_csi_d0 = port:PE04<2><default><default><default>
  608. vip_csi_d1 = port:PE05<2><default><default><default>
  609. vip_csi_d2 = port:PE06<2><default><default><default>
  610. vip_csi_d3 = port:PE07<2><default><default><default>
  611. vip_csi_d4 = port:PE08<2><default><default><default>
  612. vip_csi_d5 = port:PE09<2><default><default><default>
  613. vip_csi_d6 = port:PE10<2><default><default><default>
  614. vip_csi_d7 = port:PE11<2><default><default><default>
  615. vip_csi_sck = port:PE12<2><default><default><default>
  616. vip_csi_sda = port:PE13<2><default><default><default>
  617.  
  618. vip_dev0_mname = "ov5640"
  619. vip_dev0_pos = "rear"
  620. vip_dev0_lane = 4
  621. vip_dev0_twi_id = 2
  622. vip_dev0_twi_addr = 0x78
  623. vip_dev0_isp_used = 1
  624. vip_dev0_fmt = 1
  625. vip_dev0_stby_mode = 1
  626. vip_dev0_vflip = 0
  627. vip_dev0_hflip = 0
  628. vip_dev0_iovdd = ""
  629. vip_dev0_iovdd_vol = 2800000
  630. vip_dev0_avdd = ""
  631. vip_dev0_avdd_vol = 2800000
  632. vip_dev0_dvdd = ""
  633. vip_dev0_dvdd_vol = 1500000
  634. vip_dev0_afvdd = ""
  635. vip_dev0_afvdd_vol = 2800000
  636. vip_dev0_power_en = port:PD14<1><default><default><default>
  637. vip_dev0_reset = port:PE14<1><default><default><default>
  638. vip_dev0_pwdn = port:PE15<1><default><default><default>
  639. vip_dev0_flash_en =
  640. vip_dev0_flash_mode =
  641. vip_dev0_af_pwdn =
  642.  
  643. vip_dev0_act_used = 0
  644. vip_dev0_act_name = "ad5820_act"
  645. vip_dev0_act_slave = 0x18
  646.  
  647.  
  648. vip_dev1_mname = ""
  649. vip_dev1_pos = "front"
  650. vip_dev1_lane = 1
  651. vip_dev1_twi_id = 0
  652. vip_dev1_twi_addr =
  653. vip_dev1_isp_used = 0
  654. vip_dev1_fmt = 1
  655. vip_dev1_stby_mode = 0
  656. vip_dev1_vflip = 0
  657. vip_dev1_hflip = 0
  658. vip_dev1_iovdd = ""
  659. vip_dev1_iovdd_vol = 2800000
  660. vip_dev1_avdd = ""
  661. vip_dev1_avdd_vol = 2800000
  662. vip_dev1_dvdd = ""
  663. vip_dev1_dvdd_vol = 1500000
  664. vip_dev1_afvdd = ""
  665. vip_dev1_afvdd_vol = 2800000
  666. vip_dev1_power_en =
  667. vip_dev1_reset =
  668. vip_dev1_pwdn =
  669. vip_dev1_flash_en =
  670. vip_dev1_flash_mode =
  671. vip_dev1_af_pwdn =
  672.  
  673.  
  674. ;--------------------------------------------------------------------------------
  675. ;tv configuration
  676. ;
  677. ;--------------------------------------------------------------------------------
  678. [tvout_para]
  679. tvout_used =
  680. tvout_channel_num =
  681. tv_en =
  682.  
  683. [tvin_para]
  684. tvin_used =
  685. tvin_channel_num =
  686.  
  687. ;----------------------------------------------------------------------------------
  688. ;DE-Interlace configuration
  689. ;----------------------------------------------------------------------------------
  690. [di_para]
  691. di_used = 1
  692.  
  693. ;--------------------------------------------------------------------------------
  694. ; SDMMC PINS MAPPING |
  695. ; ------------------------------------------------------------------------------|
  696. ; Config Guide |
  697. ; sdc_used: 1-enable card, 0-disable card |
  698. ; sdc_detmode: card detect mode |
  699. ; 1-detect card by gpio polling |
  700. ; 2-detect card by gpio irq(must use IO with irq function) |
  701. ; 3-no detect, always in for boot card |
  702. ; 4-manually insert and remove by /proc/driver/sunxi-mmc.x/insert|
  703. ; sdc_buswidth: card bus width, 1-1bit, 4-4bit, 8-8bit |
  704. ; sdc_use_wp: 1-with write protect IO, 0-no write protect IO |
  705. ; sdc_isio: for sdio card |
  706. ; sdc_regulator: power control.if card supports UHS-I/DDR and HS200 timing for|
  707. ; SD3.0 or eMMC4.5, regulator must be configured. the value is |
  708. ; the ldo name of AXP221, eg: sdc_regulator = "axp22_eldo2" |
  709. ; other: GPIO Mapping configuration |
  710. ; ------------------------------------------------------------------------------|
  711. ; Note: |
  712. ; 1 if detmode=2, sdc_det's config=6 |
  713. ; else if detmode=1, sdc_det's config=0 |
  714. ; else sdc_det IO is not necessary |
  715. ; 2 if the customer wants to support UHS-I and HS200 features, he must provide|
  716. ; an independent power supply for the card. This is only used in platforms |
  717. ; that supports SD3.0 cards and eMMC4.4+ flashes |
  718. ;--------------------------------------------------------------------------------
  719. [mmc0_para]
  720. sdc_used = 1
  721. sdc_detmode = 3
  722. sdc_buswidth = 4
  723. sdc_clk = port:PF02<2><1><2><default>
  724. sdc_cmd = port:PF03<2><1><2><default>
  725. sdc_d0 = port:PF01<2><1><2><default>
  726. sdc_d1 = port:PF00<2><1><2><default>
  727. sdc_d2 = port:PF05<2><1><2><default>
  728. sdc_d3 = port:PF04<2><1><2><default>
  729. sdc_det = port:PF06<0><1><2><default>
  730. sdc_use_wp = 0
  731. sdc_wp =
  732. sdc_isio = 0
  733. sdc_regulator = "none"
  734. sdc_power_supply = "none"
  735.  
  736. [mmc1_para]
  737. sdc_used = 1
  738. sdc_detmode = 4
  739. sdc_buswidth = 4
  740. sdc_clk = port:PG00<2><1><3><default>
  741. sdc_cmd = port:PG01<2><1><3><default>
  742. sdc_d0 = port:PG02<2><1><3><default>
  743. sdc_d1 = port:PG03<2><1><3><default>
  744. sdc_d2 = port:PG04<2><1><3><default>
  745. sdc_d3 = port:PG05<2><1><3><default>
  746. sdc_det =
  747. sdc_use_wp = 0
  748. sdc_wp =
  749. sdc_isio = 1
  750. sdc_regulator = "none"
  751. sdc_power_supply = "none"
  752. sdc_2xmode = 1
  753. sdc_ddrmode = 1
  754.  
  755. [mmc2_para]
  756. sdc_used = 1
  757. sdc_detmode = 1
  758. sdc_buswidth = 8
  759. sdc_clk = port:PC05<3><1><2><default>
  760. sdc_cmd = port:PC06<3><1><2><default>
  761. sdc_d0 = port:PC08<3><1><2><default>
  762. sdc_d1 = port:PC09<3><1><2><default>
  763. sdc_d2 = port:PC10<3><1><2><default>
  764. sdc_d3 = port:PC11<3><1><2><default>
  765. sdc_d4 = port:PC12<3><1><2><default>
  766. sdc_d5 = port:PC13<3><1><2><default>
  767. sdc_d6 = port:PC14<3><1><2><default>
  768. sdc_d7 = port:PC15<3><1><2><default>
  769. emmc_rst = port:PC16<3><1><2><default>
  770. sdc_det =
  771. sdc_use_wp = 0
  772. sdc_wp =
  773. sdc_isio = 0
  774. sdc_regulator = "none"
  775. sdc_power_supply = "none"
  776. sdc_2xmode = 1
  777. sdc_ddrmode = 1
  778.  
  779. ; ------------------------------------------------------------------------------|
  780. ; sim card configuration
  781. ;--------------------------------------------------------------------------------
  782. [smc_para]
  783. smc_used = 0
  784. smc_rst = port:PA09<2><default><default><default>
  785. smc_vppen = port:PA20<3><default><default><default>
  786. smc_vppp = port:PA21<3><default><default><default>
  787. smc_det = port:PA10<2><default><default><default>
  788. smc_vccen = port:PA06<2><default><default><default>
  789. smc_sck = port:PA07<2><default><default><default>
  790. smc_sda = port:PA08<2><default><default><default>
  791.  
  792.  
  793. ;--------------------------------
  794. ; [usbc0]: Controller 0 configuration.
  795. ; usb used: USB enable flag. Set, indicating that the system USB module is available, is set to 0, it means that the system USB is disabled.
  796. ; usb_port_type: USB port usage. 0: device only; 1: host only; 2: OTG
  797. ; usb_detect_type: USB port of checking. 0: not detected; 1: vbus / id checks; 2: id / dpdm check
  798. ; usb_id_gpio: USB ID pin pin configuration. For details, please refer gpio configuration instructions.
  799. ; usb_det_vbus_gpio: USB DET_VBUS pin pin configuration. For details, please refer gpio configuration instructions.
  800. ; usb_drv_vbus_gpio: USB DRY_VBUS pin pin configuration. For details, please refer gpio configuration instructions.
  801. ; usb_det_vbus_gpio: "axp_ctrl", represents axp offer
  802. ; usb_restrict_gpio: usb limiting control pin
  803. ; usb_restric_flag: usb limiting standard set
  804. ;--------------------------------
  805. ;--------------------------------
  806. ;--- USB0控制标志
  807. ;--------------------------------
  808. [usbc0]
  809. usb_used = 1
  810. usb_port_type = 1
  811. usb_detect_type = 0
  812. usb_id_gpio = port:PL06<0><1><default><default>
  813. usb_det_vbus_gpio = "axp_ctrl"
  814. usb_drv_vbus_gpio = port:PD11<1><0><default><0>
  815. usb_host_init_state = 1
  816. usb_restrict_gpio =
  817. usb_restric_flag = 0
  818. usb_restric_voltage = 3550000
  819. usb_restric_capacity= 5
  820. usb_regulator_io = "nocare"
  821. usb_regulator_vol = 0
  822. usb_not_suspend = 0
  823.  
  824. ;--------------------------------
  825. ;--- USB1控制标志
  826. ;--------------------------------
  827. [usbc1]
  828. usb_used = 1
  829. usb_drv_vbus_gpio =
  830. usb_restrict_gpio =
  831. usb_host_init_state = 1
  832. usb_restric_flag = 0
  833. usb_regulator_io = "nocare"
  834. usb_regulator_vol = 0
  835. usb_not_suspend = 0
  836.  
  837. ;--------------------------------
  838. ;--- USB2控制标志
  839. ;--------------------------------
  840. [usbc2]
  841. usb_used = 1
  842. usb_drv_vbus_gpio =
  843. usb_restrict_gpio =
  844. usb_host_init_state = 1
  845. usb_restric_flag = 0
  846. usb_regulator_io = "nocare"
  847. usb_regulator_vol = 0
  848. usb_not_suspend = 0
  849.  
  850. ;--------------------------------
  851. ;--- USB3控制标志
  852. ;--------------------------------
  853. [usbc3]
  854. usb_used = 0
  855. usb_drv_vbus_gpio =
  856. usb_restrict_gpio =
  857. usb_host_init_state = 1
  858. usb_restric_flag = 0
  859. usb_regulator_io = "nocare"
  860. usb_regulator_vol = 0
  861. usb_not_suspend = 0
  862.  
  863. ;--------------------------------
  864. ;--- USB Device
  865. ;--------------------------------
  866. [usb_feature]
  867. vendor_id = 0x18D1
  868. mass_storage_id = 0x0001
  869. adb_id = 0x0002
  870.  
  871. manufacturer_name = "USB Developer"
  872. product_name = "Android"
  873. serial_number = "20080411"
  874.  
  875. [msc_feature]
  876. vendor_name = "USB 2.0"
  877. product_name = "USB Flash Driver"
  878. release = 100
  879. luns = 3
  880.  
  881. [serial_feature]
  882. serial_unique = 0
  883.  
  884.  
  885. ;--------------------------------------------------------------------------------
  886. ;wifi/bt/fm/gps/nfc modules configuration
  887. ;module_num:
  888. ; 0- none
  889. ; 1- rtl8188eu(wifi)
  890. ; 2- rtl8723bs(wifi+bt)
  891. ; 3- ap6181(wifi)
  892. ; 4- ap6210(wifi+bt)
  893. ; 5- ap6330(wifi+bt)
  894. ; 6- ap6335(wifi)
  895. ; 7- rtl8189etv(wifi)
  896. ;module_power0: axp used by module, "axp22_dldo1" - use dldo1, not use keep it empty
  897. ;module_power0_vol: power0 voltage, mv;
  898. ;chip_en: enable chip io
  899. ;lpo_use_apclk: ""- not use, "losc_out"- a23/33/H3, "ac10032k1"、"ac10032k2"、"ac10032k3"- a80
  900. ;--------------------------------------------------------------------------------
  901. [module_para]
  902. module_num = 4
  903. module_power0 =
  904. module_power0_vol = 0
  905. module_power1 =
  906. module_power1_vol = 1
  907. module_power2 =
  908. module_power2_vol =
  909. module_power3 =
  910. module_power3_vol =
  911. chip_en =
  912. lpo_use_apclk = "losc_out"
  913.  
  914. ;--------------------------------------------------------------------------------
  915. ;wifi configuration
  916. ;wifi_sdc_id: 0- SDC0, 1- SDC1, 2- SDC2, 3- SDC3
  917. ;wifi_usbc_id: 0- USB0, 1- USB1, 2- USB2
  918. ;wifi_usbc_type: 1- EHCI(speed 2.0), 2- OHCI(speed 1.0)
  919. ;wl_reg_on: wifi function enable pin
  920. ;wl_host_wake: wlan device wake-up host pin
  921. ;wl_host_wake_invert: whether wl_host_wake use inverter between ap and module
  922. ; 0: not used, 1: used
  923. ;--------------------------------------------------------------------------------
  924. [wifi_para]
  925. wifi_used = 1
  926. wifi_sdc_id = 1
  927. wifi_usbc_id = 1
  928. wifi_usbc_type = 1
  929. wl_reg_on = port:PL07<1><default><default><0>
  930. wl_host_wake = port:PG10<0><default><default><0>
  931. wl_host_wake_invert = 0
  932.  
  933. ;--------------------------------------------------------------------------------
  934. ;bluetooth configuration
  935. ;bt_used: 0- no used, 1- used
  936. ;bt_uard_id: 0- uart0, 1- uart1, 2- uart2
  937. ;bt_uart_baud: uart baud rate, unit: bps
  938. ;bt_rst_n: bt function enable io
  939. ;bt_wake: host wake-up bluetooth device
  940. ;bt_host_wake: bt device wake-up host
  941. ;bt_host_wake_invert: whether bt_host_wake use inverter between ap and module
  942. ; 0: not used, 1: used
  943. ;--------------------------------------------------------------------------------
  944. [bt_para]
  945. bt_used = 1
  946. bt_uart_id = 1
  947. bt_uart_baud = 1500000
  948. bt_rst_n = port:PG12<1><default><default><0>
  949. bt_wake = port:PG13<1><default><default><0>
  950. bt_host_wake = port:PG11<0><default><default><0>
  951. bt_host_wake_invert = 0
  952.  
  953. ;--------------------------------------------------------------------------------
  954. ;daudio_master:1: SND_SOC_DAIFMT_CBM_CFM(codec clk & FRM master) use
  955. ; 2: SND_SOC_DAIFMT_CBS_CFM(codec clk slave & FRM master) not use
  956. ; 3: SND_SOC_DAIFMT_CBM_CFS(codec clk master & frame slave) not use
  957. ; 4: SND_SOC_DAIFMT_CBS_CFS(codec clk & FRM slave) use
  958. ;daudio_select:0 is pcm.1 is i2s
  959. ;audio_format: 1:SND_SOC_DAIFMT_I2S(standard i2s format). use
  960. ; 2:SND_SOC_DAIFMT_RIGHT_J(right justfied format).
  961. ; 3:SND_SOC_DAIFMT_LEFT_J(left justfied format)
  962. ; 4:SND_SOC_DAIFMT_DSP_A(pcm. MSB is available on 2nd BCLK rising edge after LRC rising edge). use
  963. ; 5:SND_SOC_DAIFMT_DSP_B(pcm. MSB is available on 1nd BCLK rising edge after LRC rising edge)
  964. ;signal_inversion:1:SND_SOC_DAIFMT_NB_NF(normal bit clock + frame) use
  965. ; 2:SND_SOC_DAIFMT_NB_IF(normal BCLK + inv FRM)
  966. ; 3:SND_SOC_DAIFMT_IB_NF(invert BCLK + nor FRM) use
  967. ; 4:SND_SOC_DAIFMT_IB_IF(invert BCLK + FRM)
  968. ;over_sample_rate: support 128fs/192fs/256fs/384fs/512fs/768fs
  969. ;sample_resolution :16bits/20bits/24bits
  970. ;word_select_size :16bits/20bits/24bits/32bits
  971. ;pcm_sync_period :16/32/64/128/256
  972. ;msb_lsb_first :0: msb first; 1: lsb first
  973. ;sign_extend :0: zero pending; 1: sign extend
  974. ;slot_index :slot index: 0: the 1st slot - 3: the 4th slot
  975. ;slot_width :8 bit width / 16 bit width
  976. ;frame_width :0: long frame = 2 clock width; 1: short frame
  977. ;tx_data_mode :0: 16bit linear PCM; 1: 8bit linear PCM; 2: 8bit u-law; 3: 8bit a-law
  978. ;rx_data_mode :0: 16bit linear PCM; 1: 8bit linear PCM; 2: 8bit u-law; 3: 8bit a-law
  979. ;--------------------------------------------------------------------------------
  980. [pcm0]
  981. daudio_used = 0
  982. daudio_master = 4
  983. daudio_select = 1
  984. audio_format = 1
  985. signal_inversion = 1
  986. mclk_fs = 128
  987. sample_resolution = 16
  988. slot_width_select = 32
  989. ;pcm_sync_period = 256
  990. pcm_lrck_period = 32
  991. pcm_lrckr_period = 1
  992. msb_lsb_first = 0
  993. sign_extend = 0
  994. slot_index = 0
  995. slot_width = 32
  996. frame_width = 0
  997. tx_data_mode = 0
  998. rx_data_mode = 0
  999. i2s_mclk = port:PA18<2><1><default><default>
  1000. i2s_bclk = port:PA19<2><1><default><default>
  1001. i2s_dout0 = port:PA20<2><1><default><default>
  1002. i2s_din = port:PA21<2><1><default><default>
  1003.  
  1004.  
  1005. [pcm1]
  1006. daudio_used = 0
  1007. daudio_master = 4
  1008. daudio_select = 1
  1009. audio_format = 1
  1010. signal_inversion = 1
  1011. mclk_fs = 128
  1012. sample_resolution = 16
  1013. slot_width_select = 32
  1014. ;pcm_sync_period = 256
  1015. pcm_lrck_period = 32
  1016. pcm_lrckr_period = 1
  1017. msb_lsb_first = 0
  1018. sign_extend = 0
  1019. slot_index = 0
  1020. slot_width = 32
  1021. frame_width = 0
  1022. tx_data_mode = 0
  1023. rx_data_mode = 0
  1024. i2s_mclk = port:PG10<2><1><default><default>
  1025. i2s_bclk = port:PG11<2><1><default><default>
  1026. i2s_dout0 = port:PG12<2><1><default><default>
  1027. i2s_din = port:PG13<2><1><default><default>
  1028.  
  1029.  
  1030. [audio0]
  1031. audio_used = 1
  1032. lineout_vol = 0x1f
  1033. cap_vol = 0x5
  1034. audio_hp_ldo = "none"
  1035. adcagc_used = 0
  1036. adcdrc_used = 0
  1037. dacdrc_used = 0
  1038. adchpf_used = 0
  1039. dachpf_used = 0
  1040. audio_pa_ctrl = port:PL01<1><default><default><0>
  1041.  
  1042. [spdif0]
  1043. spdif_used = 0
  1044. spdif_dout = port:PA17<2><1><default><default>
  1045.  
  1046. [audiohub]
  1047. hub_used = 0
  1048. codec_used = 1
  1049. spdif_used = 1
  1050. hdmi_used = 1
  1051.  
  1052. ;----------------------------------------------------------------------------------
  1053. ;ir rx --- infra remote configuration
  1054. ;----------------------------------------------------------------------------------
  1055. [s_cir0]
  1056. ir_used = 1
  1057. ir_rx = port:PL11<2><1><default><default>
  1058. ir_power_key_code0 = 0x57
  1059. ir_addr_code0 = 0x9f00
  1060. ir_power_key_code1 = 0x1a
  1061. ir_addr_code1 = 0xfb04
  1062. ir_power_key_code2 = 0x14
  1063. ir_addr_code2 = 0x7F80
  1064. ir_power_key_code3 = 0x15
  1065. ir_addr_code3 = 0x7F80
  1066. ir_power_key_code4 = 0x0b
  1067. ir_addr_code4 = 0xF708
  1068. ir_power_key_code5 = 0x03
  1069. ir_addr_code5 = 0x00EF
  1070. ir_power_key_code6 = 0x9f
  1071. ir_addr_code6 = 0x4CB3
  1072. ir_power_key_code7 = 0x0a
  1073. ir_addr_code7 = 0x7748
  1074. ir_power_key_code8 = 0x45
  1075. ir_addr_code8 = 0xbd02
  1076. ir_power_key_code9 = 0x4d
  1077. ir_addr_code9 = 0xde21
  1078. ir_power_key_code10 = 0x18
  1079. ir_addr_code10 = 0xfe01
  1080. ir_power_key_code11 = 0x57
  1081. ir_addr_code11 = 0xff00
  1082. ir_power_key_code12 = 0x4d
  1083. ir_addr_code12 = 0xff40
  1084. ir_power_key_code13 = 0x88
  1085. ir_addr_code13 = 0xdd22
  1086.  
  1087.  
  1088. ;----------------------------------------------------------------------------------
  1089. ;ir tx--- infra remote configuration
  1090. ;----------------------------------------------------------------------------------
  1091. [cir]
  1092. ir_used = 1
  1093. ir_tx = port:PH07<2><default><default><default>
  1094.  
  1095.  
  1096. ;----------------------------------------------------------------------------------
  1097. ; dvfs voltage-frequency table configuration
  1098. ;
  1099. ; pmuic_type:0:none, 1:gpio, 2:i2c
  1100. ; pmu_gpio0: gpio config.
  1101. ; pmu_levelx: 0~9999: voltage(mV), 10000~90000:gpio0 state. voltage form high to low.
  1102. ;
  1103. ; extremity_freq(Hz): cpu extremity frequency when run benckmark or demo apk
  1104. ; 1536MHz@1500mV with radiator, 1296MHz@1340mV without radiator
  1105. ; max_freq: cpu maximum frequency, based on Hz, can not be more than 1200MHz
  1106. ; min_freq: cpu minimum frequency, based on Hz, can not be less than 60MHz
  1107. ;
  1108. ; LV_count: count of LV_freq/LV_volt, must be < 16
  1109. ;
  1110. ; LV1: core vdd is 1.50v if cpu frequency is (1296Mhz, 1536Mhz]
  1111. ; LV2: core vdd is 1.34v if cpu frequency is (1200Mhz, 1296Mhz]
  1112. ; LV3: core vdd is 1.32v if cpu frequency is (1008Mhz, 1200Mhz]
  1113. ; LV4: core vdd is 1.20v if cpu frequency is (816Mhz, 1008Mhz]
  1114. ; LV5: core vdd is 1.10v if cpu frequency is (648Mhz, 816Mhz]
  1115. ; LV6: core vdd is 1.04v if cpu frequency is (0Mhz, 648Mhz]
  1116. ; LV7: core vdd is 1.04v if cpu frequency is (0Mhz, 648Mhz]
  1117. ; LV8: core vdd is 1.04v if cpu frequency is (0Mhz, 648Mhz]
  1118. ;
  1119. ;----------------------------------------------------------------------------------
  1120. [dvfs_table]
  1121. pmuic_type = 0
  1122. pmu_gpio0 = port:PL06<1><1><2><1>
  1123. pmu_level0 = 11300
  1124. pmu_level1 = 1100
  1125. ;extremity_freq = 1296000000
  1126. max_freq = 816000000
  1127. min_freq = 240000000
  1128. LV_count = 2
  1129. LV1_freq = 816000000
  1130. LV1_volt = 1300
  1131. LV2_freq = 240000000
  1132. LV2_volt = 1300
  1133.  
  1134. [gpu_dvfs_table]
  1135.  
  1136. G_LV_count = 3
  1137.  
  1138. G_LV0_freq = 312000000
  1139. G_LV0_volt = 1200000
  1140.  
  1141. G_LV1_freq = 384000000
  1142. G_LV1_volt = 1200000
  1143.  
  1144. G_LV2_freq = 456000000
  1145. G_LV2_volt = 1200000
  1146.  
  1147. ;----------------------------------------------------------------------------------
  1148. ;special gpio config for Board Vendor ID
  1149. ;vid_used -- if board need distinguished by gpio,set '1';if not,set '0'
  1150. ;vid_count -- the count of vendor id bits
  1151. ;vid_bit_[0..3] -- gpio config for each bit of board vendor id
  1152. ;example: vendor id hex format :{0x 0 0 1 0 }
  1153. ; | | | |
  1154. ; [vid_bit_3] [vid_bit_2] [vid_bit_1] [vid_bit_0]
  1155. ;----------------------------------------------------------------------------------
  1156. [board_vendor]
  1157. vid_used = 0
  1158. vid_count = 0
  1159. vid_bit_0 = port:PD16<0><1><default><default>
  1160. vid_bit_1 = port:PD15<0><1><default><default>
  1161. vid_bit_2 = port:PD14<0><1><default><default>
  1162. vid_bit_3 = port:PD13<0><1><default><default>
  1163. vid_bit_4 = port:PD12<0><1><default><default>
  1164. vid_bit_5 = port:PD17<0><1><default><default>
  1165.  
  1166. ;----------------------------------------------------------------------------------
  1167. ;virtual device
  1168. ;virtual device for pinctrl testing
  1169. ;device have pin PA1 PA2
  1170. ;----------------------------------------------------------------------------------
  1171. [Vdevice]
  1172. Vdevice_used = 0
  1173. Vdevice_0 = port:PH10<5><1><2><default>
  1174. Vdevice_1 = port:PH11<5><1><2><default>
  1175.  
  1176. ;----------------------------------------------------------------------------------
  1177. ;s_uart0 config parameters
  1178. ;s_uart_used --s_uart0 whether used for arisc debugging
  1179. ;----------------------------------------------------------------------------------
  1180. [s_uart0]
  1181. s_uart_used = 0
  1182. s_uart_tx = port:PL02<2><default><default><default>
  1183. s_uart_rx = port:PL03<2><default><default><default>
  1184.  
  1185. ;----------------------------------------------------------------------------------
  1186. ;s_rsb0 config parameters
  1187. ;s_rsb_used --s_rsb0 whether used for arisc
  1188. ;----------------------------------------------------------------------------------
  1189. [s_rsb0]
  1190. s_rsb_used = 1
  1191. s_rsb_sck = port:PL00<2><1><2><default>
  1192. s_rsb_sda = port:PL01<2><1><2><default>
  1193.  
  1194. ;----------------------------------------------------------------------------------
  1195. ;s_jtag0 config parameters
  1196. ;s_jtag0_used --s_jtag0 whether used for arisc
  1197. ;
  1198. ;----------------------------------------------------------------------------------
  1199. [s_jtag0]
  1200. s_jtag_used = 0
  1201. s_jtag_tms = port:PL04<2><1><2><default>
  1202. s_jtag_tck = port:PL05<2><1><2><default>
  1203. s_jtag_tdo = port:PL06<2><1><2><default>
  1204. s_jtag_tdi = port:PL07<2><1><2><default>
  1205.  
  1206. ;----------------------------------------------------------------------------------
  1207. ;s_powchk cpus power check
  1208. ;s_powchk_used --power check whether used for arisc in super standby
  1209. ; bit31:enable power updat, bit1:wakeup when power state exception
  1210. ; bit0:wakeup when power consumption exception
  1211. ;s_power_reg the expected regs stand for power on/off state
  1212. ;s_system_power the limit maxmum power consumption when super standby (unit: mw)
  1213. ;
  1214. ;----------------------------------------------------------------------------------
  1215. [s_powchk]
  1216. s_powchk_used = 0x80000000
  1217. s_power_reg = 0x00000000
  1218. s_system_power = 50
  1219.  
  1220. ;----------------------------------------------------------------------------------
  1221. ;scr configuration
  1222. ;----------------------------------------------------------------------------------
  1223. [sim0]
  1224. scr_used = 0
  1225. scr_vccen = port:PA06<2><default><default><default>
  1226. scr_slk = port:PA07<2><default><default><default>
  1227. scr_sda = port:PA08<2><default><default><default>
  1228. scr_rst = port:PA09<2><default><default><default>
  1229. scr_det = port:PA10<2><default><default><default>
  1230.  
  1231.  
  1232. ;--------------------------------------------------------------------------------
  1233. ;tsc configuration
  1234. ;--------------------------------------------------------------------------------
  1235. [ts0]
  1236. tsc_used = 0
  1237. tsc_clk = port:PE00<3><default><default><default>
  1238. tsc_err = port:PE01<3><default><default><default>
  1239. tsc_sync = port:PE02<3><default><default><default>
  1240. tsc_dvld = port:PE03<3><default><default><default>
  1241. tsc_d0 = port:PE04<3><default><default><default>
  1242. tsc_d1 = port:PE05<3><default><default><default>
  1243. tsc_d2 = port:PE06<3><default><default><default>
  1244. tsc_d3 = port:PE07<3><default><default><default>
  1245. tsc_d4 = port:PE08<3><default><default><default>
  1246. tsc_d5 = port:PE09<3><default><default><default>
  1247. tsc_d6 = port:PE10<3><default><default><default>
  1248. tsc_d7 = port:PE11<3><default><default><default>
  1249.  
  1250. ;--------------------------------------------------------------------------------
  1251. ;gpio key
  1252. ;--------------------------------------------------------------------------------
  1253. [gpio_power_key]
  1254. key_used = 1
  1255. key_io = port:PL03<6><default><default><0>
  1256.  
  1257. ;----------------------------------------------------------------------------------
  1258. ; key para
  1259. ;
  1260. ; key_used --0:not used, 1:used
  1261. ; key_cnt --how many key button attach to keyadc.
  1262. ; key*_vol --the threshold of input voltage of key.
  1263. ;
  1264. ; For example: if key2_vol < $(keyadc value) < key3_vol, then key3 be reported.
  1265. ;----------------------------------------------------------------------------------
  1266. [key_para]
  1267. key_used = 0
  1268. key_cnt = 5
  1269. key1_vol = 222
  1270. key2_vol = 444
  1271. key3_vol = 666
  1272. key4_vol = 857
  1273. key5_vol = 2000
  1274.  
  1275. ;----------------------------------------------------------------------------------
  1276. ;display seven segment para
  1277. ;----------------------------------------------------------------------------------
  1278. [d7s_para]
  1279. d7s_used = 0
  1280. din_gpio = port:PD00<1><default><default><1>
  1281. clk_gpio = port:PD01<1><default><default><1>
  1282. stb_gpio = port:PD02<1><default><default><1>
  1283.  
  1284. ;----------------------------------------------------------------------------------
  1285. ;mali parameters
  1286. ;----------------------------------------------------------------------------------
  1287. [mali_para]
  1288. mali_used = 1
  1289. mali_clkdiv = 1
  1290. mali_extreme_freq = 600
  1291. mali_extreme_vol = 1400
  1292.  
  1293. ;----------------------------------------------------------------------------------
  1294. ;1wire parameters (default - PA20)
  1295. ;----------------------------------------------------------------------------------
  1296. [w1_para]
  1297. w1_used = 1
  1298. gpio = 20
  1299.  
  1300. [corekeeper]
  1301. corekeeper_enabled = 1
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!