Don't like ads? PRO users don't see any ads ;-)
Public Pastes
Guest

Gumstix USB Host Working (Tobi R3388)

By: a guest on Mar 20th, 2012  |  syntax: None  |  size: 14.31 KB  |  hits: 56  |  expires: Never
download  |  raw  |  embed  |  report abuse  |  print
Text below is selected. Please press Ctrl+C to copy to your clipboard. (⌘+C on Mac)
  1. X-Loader 1.5.1 (Jan 22 2012 - 11:08:14)
  2. OMAP3630/3730-GP ES2.1
  3. Board revision: 1
  4. Reading boot sector
  5. Loading u-boot.bin from mmc
  6.  
  7.  
  8. U-Boot 2011.09 (Jan 06 2012 - 13:51:09)
  9.  
  10. OMAP3630/3730-GP ES1.2, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
  11. Gumstix Overo board + LPDDR/NAND
  12. I2C:   ready
  13. DRAM:  512 MiB
  14. NAND:  512 MiB
  15. MMC:   OMAP SD/MMC: 0
  16. In:    serial
  17. Out:   serial
  18. Err:   serial
  19. Board revision: 1
  20. Direct connection on mmc2
  21. No EEPROM on expansion board
  22. Die ID #0d8e00229ff800000168301016022002
  23. Net:   smc911x-0
  24. Hit any key to stop autoboot:  0
  25. reading boot.scr
  26.  
  27. 691 bytes read
  28. Running bootscript from mmc ...
  29. ## Executing script at 82000000
  30. Booting Linux from mmc...
  31. ## Error: "i2c-speed" not defined
  32. Using i2c configuration: 3,200
  33. reading uImage
  34.  
  35. 2619768 bytes read
  36. reading uInitrd
  37.  
  38. 2617451 bytes read
  39. ## Booting kernel from Legacy Image at 80000000 ...
  40.    Image Name:   Linux-3.0.22-rt37+
  41.    Image Type:   ARM Linux Kernel Image (uncompressed)
  42.    Data Size:    2619704 Bytes = 2.5 MiB
  43.    Load Address: 80008000
  44.    Entry Point:  80008000
  45.    Verifying Checksum ... OK
  46. ## Loading init Ramdisk from Legacy Image at 81600000 ...
  47.    Image Name:   initramfs
  48.    Image Type:   ARM Linux RAMDisk Image (uncompressed)
  49.    Data Size:    2617387 Bytes = 2.5 MiB
  50.    Load Address: 00000000
  51.    Entry Point:  00000000
  52.    Verifying Checksum ... OK
  53.    Loading Kernel Image ... OK
  54. OK
  55.  
  56. Starting kernel ...
  57.  
  58. Uncompressing Linux... done, booting the kernel.
  59.  
  60. Linux version 3.0.22-rt37+ (lutz_ph@pemphredo) (gcc version 4.5.4 20110526 (prerelease) (Linaro GCC 4.5-2011.06-0) ) #52 PREEMPT RT Thu Mar 15 12:03:16 CET 2012
  61. CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
  62. CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  63. Machine: Gumstix Overo
  64. Reserving 12582912 bytes SDRAM for VRAM
  65. Memory policy: ECC disabled, Data cache writeback
  66. OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
  67. SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000
  68. On node 0 totalpages: 126464
  69. free_area_init_node: node 0, pgdat c0512c70, node_mem_map c0568000
  70.   Normal zone: 1024 pages used for memmap
  71.   Normal zone: 0 pages reserved
  72.   Normal zone: 125440 pages, LIFO batch:31
  73. Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
  74. Reprogramming SDRC clock to 332000000 Hz
  75. pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  76. pcpu-alloc: [0] 0
  77. Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125440
  78. Kernel command line: console=ttyO2,115200n8 elevator=noop vram=12M omapfb.mode=dvi:1280x720MR-16@60 mpurate=900 root=/dev/mmcblk0p2 ro rootwait raid=noautodetect noplymouth 0
  79. PID hash table entries: 2048 (order: 1, 8192 bytes)
  80. Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  81. Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  82. Memory: 494MB = 494MB total
  83. Memory: 493216k/493216k available, 31072k reserved, 0K highmem
  84. Virtual kernel memory layout:
  85.     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  86.     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  87.     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
  88.     vmalloc : 0xe0800000 - 0xf8000000   ( 376 MB)
  89.     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
  90.     modules : 0xbf000000 - 0xc0000000   (  16 MB)
  91.       .init : 0xc0008000 - 0xc0035000   ( 180 kB)
  92.       .text : 0xc0035000 - 0xc04cd228   (4705 kB)
  93.       .data : 0xc04ce000 - 0xc05133e0   ( 277 kB)
  94.        .bss : 0xc0513404 - 0xc0567d88   ( 339 kB)
  95. Preemptible hierarchical RCU implementation.
  96. NR_IRQS:410
  97. IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
  98. Total of 96 interrupts on 1 active controller
  99. OMAP clockevent source: GPTIMER1 at 32768 Hz
  100. sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  101. Console: colour dummy device 80x30
  102. Calibrating delay loop... 591.92 BogoMIPS (lpj=288768)
  103. pid_max: default: 32768 minimum: 301
  104. Mount-cache hash table entries: 512
  105. CPU: Testing write buffer coherency: ok
  106. devtmpfs: initialized
  107. omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_core
  108. omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
  109. omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
  110. omap_hwmod: gpt12_fck: missing clockdomain for gpt12_fck.
  111. omap_hwmod: i2c1: softreset failed (waited 10000 usec)
  112. omap_hwmod: i2c2: softreset failed (waited 10000 usec)
  113. omap_hwmod: i2c3: softreset failed (waited 10000 usec)
  114. print_constraints: dummy:
  115. NET: Registered protocol family 16
  116. GPMC revision 5.0
  117. OMAP GPIO hardware version 2.5
  118. OMAP GPIO hardware version 2.5
  119. OMAP GPIO hardware version 2.5
  120. OMAP GPIO hardware version 2.5
  121. OMAP GPIO hardware version 2.5
  122. OMAP GPIO hardware version 2.5
  123. omap_mux_init: Add partition: #1: core, flags: 0
  124. Found NAND on CS0
  125. Registering NAND on CS0
  126. hw-breakpoint: debug architecture 0x4 unsupported.
  127. Switched to new clocking rate (Crystal/Core/MPU): 26.0/332/900 MHz
  128. OMAP DMA hardware revision 5.0
  129. bio: create slab <bio-0> at 0
  130. SCSI subsystem initialized
  131. usbcore: registered new interface driver usbfs
  132. usbcore: registered new interface driver hub
  133. usbcore: registered new device driver usb
  134. omap_i2c omap_i2c.1: bus 1 rev4.0 at 2600 kHz
  135. twl4030: PIH (irq 7) chaining IRQs 368..375
  136. twl4030: power (irq 373) chaining IRQs 376..383
  137. twl4030: gpio (irq 368) chaining IRQs 384..401
  138. machine_constraints_voltage: VUSB1V5: override min_uV, 1 -> 1500000
  139. machine_constraints_voltage: VUSB1V5: override max_uV, 2147483647 -> 1500000
  140. print_constraints: VUSB1V5: 1500 mV normal standby
  141. machine_constraints_voltage: VUSB1V8: override min_uV, 1 -> 1800000
  142. machine_constraints_voltage: VUSB1V8: override max_uV, 2147483647 -> 1800000
  143. print_constraints: VUSB1V8: 1800 mV normal standby
  144. machine_constraints_voltage: VUSB3V1: override min_uV, 1 -> 3100000
  145. machine_constraints_voltage: VUSB3V1: override max_uV, 2147483647 -> 3100000
  146. print_constraints: VUSB3V1: 3100 mV normal standby
  147. twl4030_usb twl4030_usb: HW_CONDITIONS 0x10/16; link 0
  148. twl4030_usb twl4030_usb: Initialized TWL4030 USB module
  149. print_constraints: VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby
  150. print_constraints: VDAC: 1800 mV normal standby
  151. print_constraints: VDVI: 1800 mV normal standby
  152. omap_i2c omap_i2c.3: bus 3 rev4.0 at 200 kHz
  153. Switching to clocksource 32k_counter
  154. Switched to NOHz mode on CPU #0
  155. musb-hdrc: version 6.0, musb-dma, host
  156. twl4030_usb twl4030_usb: twl4030_phy_resume
  157. musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
  158. musb-hdrc: MHDRC RTL version 1.800
  159. musb-hdrc: setup fifo_mode 4
  160. musb-hdrc: 28/31 max ep, 16384/16384 memory
  161. musb-hdrc musb-hdrc: MUSB HDRC host driver
  162. drivers/usb/core/inode.c: creating file 'devices'
  163. drivers/usb/core/inode.c: creating file '001'
  164. musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 1
  165. usb usb1: default language 0x0409
  166. usb usb1: udev 1, busnum 1, minor = 0
  167. usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  168. usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  169. usb usb1: Product: MUSB HDRC host driver
  170. usb usb1: Manufacturer: Linux 3.0.22-rt37+ musb-hcd
  171. usb usb1: SerialNumber: musb-hdrc
  172. usb usb1: usb_probe_device
  173. usb usb1: configuration #1 chosen from 1 choice
  174. usb usb1: adding 1-0:1.0 (config #1, interface 0)
  175. hub 1-0:1.0: usb_probe_interface
  176. hub 1-0:1.0: usb_probe_interface - got id
  177. hub 1-0:1.0: USB hub found
  178. hub 1-0:1.0: 1 port detected
  179. hub 1-0:1.0: standalone hub
  180. hub 1-0:1.0: individual port power switching
  181. hub 1-0:1.0: no over-current protection
  182. hub 1-0:1.0: Single TT
  183. hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
  184. hub 1-0:1.0: power on to power good time: 10ms
  185. hub 1-0:1.0: 100mA bus power budget for each child
  186. hub 1-0:1.0: local power source is good
  187. hub 1-0:1.0: enabling power on all ports
  188. drivers/usb/core/inode.c: creating file '001'
  189. musb-hdrc musb-hdrc: USB Host mode controller at fa0ab000 using DMA, IRQ 92
  190. NET: Registered protocol family 2
  191. IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  192. TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  193. TCP bind hash table entries: 16384 (order: 6, 393216 bytes)
  194. TCP: Hash tables configured (established 16384 bind 16384)
  195. TCP reno registered
  196. UDP hash table entries: 256 (order: 2, 16384 bytes)
  197. UDP-Lite hash table entries: 256 (order: 2, 16384 bytes)
  198. NET: Registered protocol family 1
  199. Trying to unpack rootfs image as initramfs...
  200. twl4030_usb twl4030_usb: HW_CONDITIONS 0x90/144; link 1
  201. hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
  202. Freeing initrd memory: 2556K
  203. omap_dsp_init: 600000 bytes @ 9ee00000
  204. VFS: Disk quotas dquot_6.5.2
  205. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  206. msgmni has been set to 968
  207. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  208. io scheduler noop registered (default)
  209. io scheduler deadline registered
  210. io scheduler cfq registered
  211. OMAP DSS rev 2.0
  212. Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  213. omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
  214. omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
  215. omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
  216. console [ttyO2] enabled
  217. omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
  218. brd: module loaded
  219. loop: module loaded
  220. omap2-nand driver initializing
  221. ONFI flash detected
  222. NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB 1,8V 16-bit)
  223. Creating 5 MTD partitions on "omap2-nand.0":
  224. 0x000000000000-0x000000080000 : "xloader"
  225. 0x000000080000-0x000000240000 : "uboot"
  226. 0x000000240000-0x000000280000 : "uboot environment"
  227. 0x000000280000-0x000000680000 : "linux"
  228. 0x000000680000-0x000020000000 : "rootfs"
  229. smsc911x: Driver version 2008-10-21
  230. smsc911x-mdio: probed
  231. smsc911x smsc911x.0: eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, irq=-1)
  232. smsc911x smsc911x.0: eth0: MAC Address: 00:15:c9:28:e9:31
  233. smsc911x: Driver version 2008-10-21
  234. usbcore: registered new interface driver asix
  235. usbcore: registered new interface driver cdc_ether
  236. usbcore: registered new interface driver cdc_eem
  237. usbcore: registered new interface driver dm9601
  238. usbcore: registered new interface driver smsc75xx
  239. usbcore: registered new interface driver smsc95xx
  240. cdc_ncm: 04-Aug-2011
  241. usbcore: registered new interface driver cdc_ncm
  242. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  243. ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
  244. ehci-omap ehci-omap.0: failed to get ehci port1 regulator
  245. ehci-omap ehci-omap.0: phy reset operation timed out
  246. ehci-omap ehci-omap.0: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3
  247. ehci-omap ehci-omap.0: reset hcc_params 0016 thresh 1 uframes 256/512/1024 park
  248. ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
  249. drivers/usb/core/inode.c: creating file '002'
  250. ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 2
  251. ehci-omap ehci-omap.0: park 0
  252. ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
  253. ehci-omap ehci-omap.0: reset command 0080b02  park=3 ithresh=8 period=1024 Reset HALT
  254. ehci-omap ehci-omap.0: init command 0010005 (park)=0 ithresh=1 period=512 RUN
  255. ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
  256. usb usb2: default language 0x0409
  257. usb usb2: udev 1, busnum 2, minor = 128
  258. usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  259. usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  260. usb usb2: Product: OMAP-EHCI Host Controller
  261. usb usb2: Manufacturer: Linux 3.0.22-rt37+ ehci_hcd
  262. usb usb2: SerialNumber: ehci-omap.0
  263. usb usb2: usb_probe_device
  264. usb usb2: configuration #1 chosen from 1 choice
  265. usb usb2: adding 2-0:1.0 (config #1, interface 0)
  266. hub 2-0:1.0: usb_probe_interface
  267. hub 2-0:1.0: usb_probe_interface - got id
  268. hub 2-0:1.0: USB hub found
  269. hub 2-0:1.0: 3 ports detected
  270. hub 2-0:1.0: standalone hub
  271. hub 2-0:1.0: individual port power switching
  272. hub 2-0:1.0: individual port over-current protection
  273. hub 2-0:1.0: power on to power good time: 20ms
  274. hub 2-0:1.0: local power source is good
  275. hub 2-0:1.0: enabling power on all ports
  276. drivers/usb/core/inode.c: creating file '001'
  277. ehci-omap ehci-omap.0: ...powerup ports...
  278. Initializing USB Mass Storage driver...
  279. usbcore: registered new interface driver usb-storage
  280. USB Mass Storage support registered.
  281. mousedev: PS/2 mouse device common for all mice
  282. twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
  283. twl_rtc twl_rtc: Power up reset detected.
  284. i2c /dev entries driver
  285. lirc_dev: IR Remote Control driver registered, major 250
  286. IR NEC protocol handler initialized
  287. IR RC5(x) protocol handler initialized
  288. IR RC6 protocol handler initialized
  289. IR JVC protocol handler initialized
  290. IR Sony protocol handler initialized
  291. IR RC5 (streamzap) protocol handler initialized
  292. IR LIRC bridge handler initialized
  293. Linux video capture interface: v2.00
  294. gspca: v2.13.0 registered
  295. usbcore: registered new interface driver uvcvideo
  296. USB Video Class driver (v1.1.0)
  297. Registered led device: overo:red:gpio21
  298. Registered led device: overo:blue:gpio22
  299. Registered led device: overo:blue:COM
  300. usbcore: registered new interface driver usbhid
  301. usbhid: USB HID core driver
  302. TCP cubic registered
  303. NET: Registered protocol family 17
  304. NET: Registered protocol family 15
  305. Registering the dns_resolver key type
  306. VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  307. ThumbEE CPU extension supported.
  308. fbcvt: 1280x720@60: CVT Name - .921M9-R
  309. hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000
  310. Console: switching to colour frame buffer device 160x45
  311. regulator_init_complete: VDAC: incomplete constraints, leaving on
  312. twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:12 UTC (946684812)
  313. omap_vout omap_vout: probed for an unknown device
  314. mmc0: host does not support reading read-only switch. assuming write-enable.
  315. mmc0: new SDHC card at address 1234
  316. mmcblk0: mmc0:1234 SA16G 14.8 GiB
  317.  mmcblk0: p1 p2 p3
  318. Freeing init memory: 180K
  319. udev[88]: starting version 167
  320. aufs 3.0-20120109
  321. EXT3-fs: barriers not enabled
  322. EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode
  323. kjournald starting.  Commit interval 5 seconds
  324. aufs test_add:261:exe[208]: uid/gid/perm /ro 0/0/0755, 0/0/01777
  325. EXT3-fs: barriers not enabled
  326. EXT3-fs (mmcblk0p3): warning: mounting unchecked fs, running e2fsck is recommended
  327. kjournald starting.  Commit interval 5 seconds
  328. EXT3-fs (mmcblk0p3): using internal journal
  329. EXT3-fs (mmcblk0p3): recovery complete
  330. EXT3-fs (mmcblk0p3): mounted filesystem with writeback data mode
  331. udev[316]: starting version 167
  332. smsc911x smsc911x.0: eth0: SMSC911x/921x identified at 0xe0806000, IRQ: 336
  333. GPIO Event Monitor 0.1 Compiled: Mar  7 2012 at 13:51:38
create a new version of this paste RAW Paste Data