Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- T
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- ################################################################
- done
- Bytes transferred = 5316251 (511e9b hex)
- LoadAddr=80100000 NetBootFileXferSize=00511e9b
- MT7620 # bootm 80100000
- ## Checking image at 80100000 ...
- Image Name: SNR-CPE-W4N-MT
- Image Type: MIPS Linux Kernel Image (uncompressed)
- Data Size: 5316187 Bytes = 5.1 MB
- Load Address: 80000000
- Entry Point: 80000000
- Verifying Checksum ... OK
- OK
- No initrd
- ## Transferring control to Linux (at address 80000000) ...
- ## Giving linux memsize in MB, 64
- Starting kernel ...
- OpenWrt kernel loader for MIPS based SoC
- Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- Decompressing kernel... done!
- Starting kernel at 80000000...
- [ 0.000000] Linux version 5.10.144 (user@debian) (mipsel-openwrt-linux-musl-gcc (OpenWrt GCC 11.3.0 r20779+1-c5e167e0d6) 11.3.0, GNU ld (GNU Binutils) 2.37) #0 Sat Oct 1 14:10:59 2022
- [ 0.000000] Board has DDR1
- [ 0.000000] Analog PMU set to hw control
- [ 0.000000] Digital PMU set to hw control
- [ 0.000000] SoC Type: MediaTek MT7620N ver:2 eco:6
- [ 0.000000] printk: bootconsole [early0] enabled
- [ 0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)
- [ 0.000000] MIPS: machine is SNR-CPE-W4N (rev.M)
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16240
- [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
- [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
- [ 0.000000] Writing ErrCtl register=00077ed9
- [ 0.000000] Readback ErrCtl register=00077ed9
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 53416K/65536K available (5253K kernel code, 613K rwdata, 1112K rodata, 4212K init, 209K bss, 12120K reserved, 0K cma-reserved)
- [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] NR_IRQS: 256
- [ 0.000000] CPU Clock: 580MHz
- [ 0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns
- [ 0.000000] systick: enable autosleep mode
- [ 0.000000] systick: running - mult: 214748, shift: 32
- [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
- [ 0.000010] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
- [ 0.015563] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
- [ 0.087803] pid_max: default: 32768 minimum: 301
- [ 0.097187] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.111594] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.129567] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
- [ 0.148272] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.167755] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
- [ 0.181345] pinctrl core: initialized pinctrl subsystem
- [ 0.192822] NET: Registered protocol family 16
- [ 0.210183] rt2880-pinmux pinctrl: there is not valid maps for state default
- [ 0.276377] rt2880_gpio 10000600.gpio: registering 24 gpios
- [ 0.287449] rt2880_gpio 10000600.gpio: registering 24 irq handlers
- [ 0.307446] clocksource: Switched to clocksource systick
- [ 0.319356] NET: Registered protocol family 2
- [ 0.328264] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
- [ 0.343371] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
- [ 0.360003] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.375126] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.389131] TCP: Hash tables configured (established 1024 bind 1024)
- [ 0.401918] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
- [ 0.414834] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
- [ 0.428992] NET: Registered protocol family 1
- [ 0.437579] PCI: CLS 0 bytes, default 32
- [ 6.448190] rt-timer 10000100.timer: maximum frequency is 1220Hz
- [ 6.463201] workingset: timestamp_bits=14 max_order=14 bucket_order=0
- [ 6.481530] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 6.493035] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 6.515986] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- [ 6.529661] printk: console [ttyS0] disabled
- [ 6.538173] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103
- [ 6.557803] printk: console [ttyS0] enabled
- [ 6.557803] printk: console [ttyS0] enabled
- [ 6.574377] printk: bootconsole [early0] disabled
- [ 6.574377] printk: bootconsole [early0] disabled
- [ 6.604666] spi spi0.0: force spi mode3
- [ 6.629188] gsw: setting port4 to ephy mode
- [ 6.637746] mtk_soc_eth 10100000.ethernet: generated random MAC address ca:42:f4:9a:a7:4e
- [ 6.654070] mtk_soc_eth 10100000.ethernet: no mdio-bus child node found
- [ 6.667256] mtk_soc_eth 10100000.ethernet: mdio-bus disabled
- [ 6.678750] mtk_soc_eth 10100000.ethernet: loaded mt7620 driver
- [ 6.691321] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
- [ 6.708371] rt2880_wdt 10000120.watchdog: Initialized
- [ 6.719766] NET: Registered protocol family 10
- [ 6.734248] Segment Routing with IPv6
- [ 6.741758] NET: Registered protocol family 17
- [ 6.750741] 8021q: 802.1Q VLAN Support v1.8
- [ 6.784102] Freeing unused kernel memory: 4212K
- [ 6.793168] This architecture does not have kernel memory protection.
- [ 6.806016] Run /init as init process
- [ 7.320040] init: Console is alive
- [ 7.327370] init: - watchdog -
- [ 7.366831] kmodloader: loading kernel modules from /etc/modules-boot.d/*
- [ 7.398181] usbcore: registered new interface driver usbfs
- [ 7.409257] usbcore: registered new interface driver hub
- [ 7.419980] usbcore: registered new device driver usb
- [ 7.438986] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 7.453986] ehci-fsl: Freescale EHCI Host controller driver
- [ 7.468156] ehci-platform: EHCI generic platform driver
- [ 7.484520] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 7.499585] ohci-platform: OHCI generic platform driver
- [ 7.514576] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
- [ 7.533494] init: - preinit -
- [ 7.854687] random: jshn: uninitialized urandom read (4 bytes read)
- [ 7.984789] random: jshn: uninitialized urandom read (4 bytes read)
- [ 8.020105] random: jshn: uninitialized urandom read (4 bytes read)
- [ 8.308647] 8021q: adding VLAN 0 to HW filter on device eth0
- Press the [f] key and hit [enter] to enter failsafe mode
- Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
- [ 8.649230] mtk_soc_eth 10100000.ethernet eth0: port 0 link up (100Mbps/Full duplex)
- [ 8.746596] mtk_soc_eth 10100000.ethernet eth0: port 1 link up (100Mbps/Full duplex)
- [ 9.223230] procd: - early -
- [ 9.229492] procd: - watchdog -
- [ 9.459375] procd: - watchdog -
- [ 9.467514] procd: - ubus -
- [ 9.483932] random: ubusd: uninitialized urandom read (4 bytes read)
- [ 9.507649] random: ubusd: uninitialized urandom read (4 bytes read)
- [ 9.521033] random: ubusd: uninitialized urandom read (4 bytes read)
- [ 9.538302] procd: - init -
- Please press Enter to activate this console.
- [ 10.385785] kmodloader: loading kernel modules from /etc/modules.d/*
- [ 10.958088] urngd: jent-rng init failed, err: 2
- [ 10.989445] Loading modules backported from Linux version v5.15.58-0-g7d8048d4e064
- [ 11.004627] Backport generated by backports.git v5.15.58-1-0-g42a95ce7
- [ 11.195597] PPP generic driver version 2.4.2
- [ 11.209030] NET: Registered protocol family 24
- [ 11.263677] ieee80211 phy0: rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'soc_wmac.eeprom'.
- [ 11.283674] rt2800_wmac 10180000.wmac: Direct firmware load for soc_wmac.eeprom failed with error -2
- [ 11.301906] rt2800_wmac 10180000.wmac: Falling back to sysfs fallback for: soc_wmac.eeprom
- [ 11.421966] ieee80211 phy0: rt2x00lib_request_eeprom_file: Error - Failed to request EEPROM.
- [ 11.438921] rt2800_wmac: probe of 10180000.wmac failed with error -12
- [ 11.481436] kmodloader: done loading kernel modules from /etc/modules.d/*
- [ 12.016654] random: jshn: uninitialized urandom read (4 bytes read)
- [ 12.146856] random: jshn: uninitialized urandom read (4 bytes read)
- [ 12.182155] random: jshn: uninitialized urandom read (4 bytes read)
- [ 13.348851] random: jshn: uninitialized urandom read (4 bytes read)
- [ 20.575903] random: crng init done
- [ 20.582693] random: 73 urandom warning(s) missed due to ratelimiting
- [ 40.529611] 8021q: adding VLAN 0 to HW filter on device eth0
- [ 40.556503] br-lan: port 1(eth0) entered blocking state
- [ 40.566994] br-lan: port 1(eth0) entered disabled state
- [ 40.577820] device eth0 entered promiscuous mode
- [ 40.639576] br-lan: port 1(eth0) entered blocking state
- [ 40.650063] br-lan: port 1(eth0) entered forwarding state
- [ 41.566021] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
- BusyBox v1.35.0 (2022-09-28 20:36:41 UTC) built-in shell (ash)
- _______ ________ __
- | |.-----.-----.-----.| | | |.----.| |_
- | - || _ | -__| || | | || _|| _|
- |_______|| __|_____|__|__||________||__| |____|
- |__| W I R E L E S S F R E E D O M
- -----------------------------------------------------
- OpenWrt SNAPSHOT, r20779+2-c5e167e0d6
- -----------------------------------------------------
- === WARNING! =====================================
- There is no root password defined on this device!
- Use the "passwd" command to set up a new password
- in order to prevent unauthorized SSH logins.
- --------------------------------------------------
- root@OpenWrt:/#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement